Benutzeranleitung / Produktwartung 795.6900 des Produzenten Kenmore
Zur Seite of 41
BOTTOM FREEZER REFRIGERATOR REFRIGERADOR CON CONGELADOR INFERIOR ....... _ _'___ _ ......... C _;_'i_ _;_,,, _ _,_,_,_ _ ........... S_ "_ !/ _,_ ,,_, ................ CONGI_LATEUR INFI_RIEUR RI_FRIGI_RATEUR Models / Modelos / Modeles 795.
English Version 2 Spanish Version 41 French Version 81 Warranty and Product Record 3 - 4 Safety Instructions 5 - 6 Grounding Requirements 6 Parts and Features 7 - 8 Refrigerator Installation 9 -21 Unp.
BOTTOM FREEZER REFRIGERATOR Kenmore Appliance Warranty _One Year Limited Warranty When installed, operated and maintained according to all instructions supplied with the product, if this appliance fails due to a defect in material or workmanship within one year from the date of purchase, call 1-800-4-MY-HOME to arrange for free repair.
Master Protection Agreements Congratulations on making a smart purchase. Your new Kenmor# _ product is designed and manufactured for years of dependable operation. But like all products, it may require preventive maintenance or repair from time to time.
This guide contains many important safety messages. Always read and obey all safety messages. This is the safety alert symbol. It alerts you to safety messages that inform you of hazards that can kill or hurt you or others, or cause damage to the product.
This appliance is not intended for use by persons (including children) with reduce physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by person responsible for their safety.
FREEZER DRAWER MODEL Use this section to become more familiar with the parts and features. NOTE: This guide covers several different models. The refrigerator you have purchased may have some or all of the items listed below. The locations of the features shown below may not match your model.
FREEZER SWING DOOR MODEL Use this section to become more familiar with the parts and features. NOTE: This guide covers several different models. The refrigerator you have purchased may have some or all of the items listed below. The locations of the features shown below may not match your model.
Excessive Weight Hazard Use two or more people to move and install refrigerator. Failure to do so can result in back or other injury. UNPACKING YOUR REFRIGERATOR Remove tape and any temporary labels from your refrigerator before using.
ELECTRICAL SHOCK HAZARD Before you begin, either unplug the refrigerator or turn off power at the circuit breaker or fuse box. Failure to do so could result in death or serious injury. Remove food and any Adjustable Door or Utility Bins from doors. Failure to do so could result in serious injury.
• Remove the screws of the rail on both sides. Fig. 8 screw [] CAUTION:When removing drawer door, do not hold it by the handle. Door could fall down and you may be injured.
HOW TO INSTALL PULL OUT DRAWER IMPORTANT: To avoid possible injury, product or property damage, you will need two people to perform the following instructions. • With both hands, hold the center of the bar and pull it out to let both rails out to full extension simultaneously.
REMOVING,REVERSING AND REPLACING REFRIGERATOR DOORS (For Freezer Drawer Models) ELECTRICAL SHOCK HAZARD Before you begin, either unplug the refrigerator or turn off power at the circuit breaker or fuse box. Failure to do so could result in death or serious injury.
• Remove Washer and set aside. • Using a 1/4 socket wrench, loosen and remove Hinge Pin from the Middle Hinge Bracket. Pin • Flip the middle hinge bracket and position on left side of refrigerator and re-attach with two bolts and a 2 phillips screws.
• Install the handle mounting fasteners on the right side. Turn handle upside down. HOW TO REVERSE DOOR HANDLE NOTE: Handle appearance may vary from illustrations on this page. • Loosen the 2 set screws with a 3/32" hex wrench and remove the handle.
ELECTRICAL SHOCK HAZARD Before you begin, either unplug the refrigerator or turn off power at the circuit breaker or fuse box. Failure to do so could result in death or serious injury. Remove food and any Adjustable Door or Utility Bins from doors. Failure to do so could result in serious injury.
Place freezer door down on Bottom Hinge Pin. Bottom Hinge '_ Fig. 52 • Reattach Middle Hinge Pin. Replace washer. REMOVING,REVERSING AND REPLACING REFRIGERATOR DOORS (For Freezer Swing Models) ELECTRICAL SHOCK HAZARD Before you begin, either unplug the refrigerator or turn off power at the circuit breaker or fuse box.
Remove Hinge Pin Insert on the right side of the door and reinstall on left side of door. Fig. 60 Hinge Pin • Turn refrigerator door upside down on a non-scratch surface. • Loosen the 2 screws to remove the Bottom Hinge Pin Insert Bracket with Hinge Pin Insert.
• Take Door Closer/Stop and flip. Line up screw holes and mount on left side of door bottom with the 2 screws. Turn door upright and set aside. Fig. 68 Use a 10mm or 13/32 inch socket wrench to remove the 2 bolts in Middle Hinge Bracket. Remove 2 screws.
• Change the Hinge Pin from the right side to left side. After Fig. 77 • Put freezer door down over the Bottom Hinge Pin on the Bottom Hinge Bracket. • Reattach Middle Hinge Pin using a 1/4" socket wrench. Replace washer. • Put refrigerator door down over the Hinge Pin on the Middle Hinge Pin Bracket.
• Keeping the same top and bottom orientation, align the keyhole slots on the door handle to the handle mounting screws on the door and grasping the handle with both hands, press it firmly against the front of the door and slide the handle down. This may require some force.
ENSURING PROPER AIR CIRCULATION In order to ensure proper temperatures, air must flow between the refrigerator and freezer sections. As shown in the illustration below, cool air enters through the bottom of the freezer section and moves up. Most of the air then flows through the freezer section vents and recirculates under the freezer floor.
I_ Identify your control type • Refrigerator control: position 1 to 7 (32 °F to 47 °F or 0 °C to 8 °C) The higher the number setting, the colder the refrigerator compartment will become.
FOOD STORAGE GUIDE Storing Fresh Food Wrap or store food in the refrigerator in airtight and moisture-proof material unless otherwise noted. This prevents food odor and taste transfer throughout the refrigerator. For dated products, check date code to ensure freshness.
REFRIGERATOR SHELVES The shelves in your refrigerator are adjustable to meet your individual storage needs. These units are all glass shelves. Storing similar food items together in your refrigerator .
REFRIGERATOR FEATURES (For Freezer Drawer Models) PANTRY (on some models) Adjust the control to desired temperature by moving from COLD to COLDER. Pull forward to open. Lift slightly and pull it out to remove. CRISPER HUMIDITY CONTROL (on some models) You can control the amount of humidity in the moisture- sealed crispers.
REFRIGERATOR FEATURES (For Freezer Swing Models) CHEF FRESH / SNACK PAN (on some models) While holding the chef fresh with one hand, pull it forward slightly. Lift slightly and pull it out. To remove the crisper: 1. Slide crisper straight out to the stop.
DOOR RACKS The door racks may be removed for easier cleaning. Snap-on Door Racks To remove the racks: 1. Remove all items in the door racks. 2. Push the rack against the inside wall of the door (A) and lift up on door rack (B).
DAIRY BIN 1. To remove the dairy bin, simply lift it and pull straight out. 2. To replace the dairy bin, slide it in above the desired location and push down until it stops. DURABASE (on some models) 1. To remove the Durabase, push it back to the end as much as possible.
GLIDE-OUT DRAWER BASKET (on some models) 1. To remove, lift basket up and pull out straight out. J 2. To Install, pull both rails out to full extension. Hook the basket supports into the rail tabs and push to the back of compartment. [] WARNING:To avoid hand injury, keep your hands away from tilting device when drawer is open.
Explosion Hazard Use non-flammable cleaner. Failure to do so can result in death, explosion, or fire. DOOR LINERS AND GASKETS Do not use cleaning waxes, concentrated detergent, bleaches, or cleaners containing petroleum on plastic refrigerator parts. Use a clean sponge or soft cloth and a mild detergent in warm water.
4. Turn the bulb counter clockwise. 5. To assemble, first insert the hooks at the back and then push up the light shield. I To change the freezer light: 1. Unplug refrigerator or disconnect power. 2. Reach behind light shield to remove bulb. 3. Replace bulb with a 60-watt appliance bulb.
ICEMAKER NOTE: Automatic Ice Maker feature is included only in certain models. Please check your product specification. Personal Injury Hazard Avoid contact with the moving parts of the ejector mechanism, or with the heating element that releases the cubes.
NOTE: Water line installation is needed when the Automatic Icemaker and/or Water Dispenser features are available on your product. BEFORE YOU BEGIN This water line installation is not warranted by the refrigerator or icemaker manufacturer. Follow these instructions carefully to minimize the risk of expensive water damage.
INSTALLATION INSTRUCTIONS (CONTINUED) 2. CHOOSE THE VALVE LOCATION Choose a location for the valve that is easily accessible. It is best to connect into the side of a vertical water pipe.
, CONNECT THE TUBING TO THE REFRIGERATOR NOTES: • Before making the connection to the refrigerator, be sure the refrigerator power cord is not plugged into the wall outlet.
UNDERSTANDING SOUNDS YOU MAY HEAR Your new refrigerator may make sounds that your old one didn't make. Because the sounds are new to you, you might be concerned about them. Most of the new sounds are normal. Hard surfaces, like the floor, walls and cabinets, can make the sounds seem louder than they actually are.
COMPRESSOR MOTOR SEEMS TO RUN TOO MUCH Check if... Then... The refrigerator that was replaced was an older model. The room temperature is hotter than normal. The door is opened often or a large amount of food has just been added. Modern refrigerators with more storage space require more operating time.
ICE HAS OFF-TASTE OR ODOR Check if... Then... The icemaker was recently installed. Discard first few batches of ice to avoid discolored or off-flavored ice.
AUTOMATIC ICEMAKER DOES NOT WORK Check if... Then... Icemaker power switch in the O (off) position. Move the switch to the I (on) position. Water supply turned off or not connected. See the Connecting the Water Line section. Freezer compartment too warm.
iiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiiii_i > iiiiiiiiiiiiiiiiiiiiiiii _'_ iiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiii iiiii.
Ein wichtiger Punkt beim Kauf des Geräts Kenmore 795.6900 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Kenmore 795.6900 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Kenmore 795.6900 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Kenmore 795.6900 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Kenmore 795.6900 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Kenmore 795.6900 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Kenmore 795.6900 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Kenmore 795.6900. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Kenmore 795.6900 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
