Benutzeranleitung / Produktwartung 3950144 des Produzenten Kenmore
Zur Seite of 37
Owner's Manual and installation instructions Three-Speed AUTOMATIC WASHERS IMPORTANT: Read and follow all safety and operating instructions before first use of this product, Your washer may look different from the washer shown. Sears, Roebuck and Co.
BEFORE USING YOUR NEW WASHER SEARS AUTOMATIC WASHER WARRANTY iMPORTANT SAFETY iNSTRUCTiONS iNSTALLATION iNSTRUCTiONS OPERATING YOUR WASHER LAUNDRY TiPS CARING FOR YOUR WASHER TROUBLESHOOTING SEARS MAINTENANCE AGREEMENT 2 3 4 5 20 29 31 32 36 Please read this manual.
FULL I-YEAR WARRANTY ON MECHANICAL AND ELECTRICAL PARTS For one year from the date of purchase, when the washer is installed and operated in accordance with the instructions in the Owner's Manual, Sears will repair or replace any mechanical or electrical parts in this washer, if defective in material or workmanship.
YOUR SAFETY IS IMPORTANT TO US WARNING: To reduce the risk of fire, electric shock, or injury to persons when using your washer, follow basic precautions, including the following: • Read all instructions before using the washer.
INSTALLATION OVERVIEW For a complete list of tools and parts needed, see pages 6-8. A. SELECT LOCATION FOR YOUR WASHER (pgs. 10-12) Recessed Areal Closet Installation Instructions (p. 10) Standpipe Drain System (p. 12) 39" Laundry Tub Drain System (p.
B. REMOVE SHIPPING STRAP (p. 13) Tools Needed: Scissors Flashlight (optional depending on installation) C. CONNECT DRAIN HOSE (pgs. i4-i5) __/TWl S T _,_Yl / AND _ _i PUSH Tools Needed: Parts Needed: .
D, CONNECT iNLET HOSES TO WASHER (pgs. 15-16) Tools Needed: Parts Needed: 1 Su Pliers that open to 19/[_ inches Flashlight (optional depending on installation) 2 water inlet hoses 4 flat water inlet hose washers E.
F. SECURE DRAIN HOSE (p. 17) Tools Needed: Parts Needed: Flashlight (optional depending on installation) Shipping strap with fastener G. LEVELWASHER (p, 18) Tools Needed: Parts Needed: U16-1nch open-e.
Selecting the proper location for your washer will improve its performance and minimize concerns like washer walk or noise. ELECTRICAL REQUIREMENTS 120-Volt, 60-Hz., AC-only, 15- or 20-ampere fused electrical supply is required. (Time-delay fuse or circuit breaker is recommended.
A. SELECT LOCATION FOR YOUR WASHER - RECESSED AREAl CLOSET INSTALLATION INSTRUCTIONS This washer may be installed in a recessed area or closet. 48 sq. in. minimum ventilation area 24 sq. in. minimum ventilutiun al'ea Front View (Door With Vent) 3" f 3" *Additional clearance tot wall, door and tloor moldings may be required.
LAUNDRY TUB DRAIN SYSTEM Check location where washer will be installed. This washer can be installed using one of three systems: • Laundry tub drain system (below) • Standpipe drain system (p. 12) • Floor drain system (p. 12) Do not store or operate washer at or below 32°F (some water may remain in washer).
ALTERNATE LOCATIONS- STANDPIPE AND FLOOR DRAIN SYSTEMS Siphon break: Must be purchased separately. See chart below. Standpipe drain system: Needs a two-inch minimum diameter standpipe with minimum carry-away capacity of 17 gallons per minute. Top of standpipe must be at least 39 inches above floor and no higher than 96 inches from bottom of washer.
B. REMOVE SHIPPING STRAP Removing the shipping strap is necessary for smooth operation, If the shipping strap is not removed, the washer will make excessive noise. To prevent floor damage, set washer onto cardboard before moving across floor. Move washer close to its final location.
C. CONNECT DRAIN HOSE Proper connection of the drain hose will protect your floors from damage due to water leakage. STEP 1. To prevent the drain hose from coming off or leaking, it must be installed per the following instructions: IMPORTANT: To ensure proper installa- tion, this procedure must be followed exactly.
For standpipe or laundry tubdrain systems: STEP 2. Open yellow, single-wire clamp with pliers and slide over hooked end ofdrain hose tosecure the rubber and corrugated sections together.
STEP 2.Attach the hose with the red coupling to the hot water (bottom) inlet valve. Attaching the red coupling first makes it easier to tighten connection with pliers. Screw on coupling by hand. Make an additional two-thirds turn with pliers to tighten coupling.
F. SECURE DRAIN HOSE Securing the drain hose properly will protect your floors from damage due to water leakage. STEP 1. Move washer to its final location. -4 u STEP 2. Locate the remaining piece of sMpping strap (not the end with the three cotter pins) from STEP 4 of "REMOVE SHIPPING STRAP.
G. LEVEL WASHER Leveling your washer properly pre- vents excessive noise and vibration. To install front legs: STEP 1. Prop front of washer up (about 4 inches). Use a wood block or another object that will support the weight of the washer. If washer was placed against a wall, move the washer out slightly before tipping it up.
REVIEW INSTALLATION Take a few minutes to complete this checklist, it will help assure you that you have a proper installation and increase your satisfaction with your Kenmore washer, [] Check electrical requirements. Be sure you have correct electrical supply and recommended grounding method.
To get the maximum cleaning and fabric care from your washer, please read and follow these instructions. NOTE: The drawings in this section show the basic features of all models covered by this manual. Refer to the supplied "Feature Sheet" for your washer's particular features.
SET WATER LEVEL CONTROL This control gives you the flexibility to save water when washing small loads. Your washer lets you select a water setting based on the size of your wash load. • For normal loads, start with the MEDIUM LOAD Setting. Adjust up or down depending on your load.
AUTOMATIC TEMPERATURE CONTROL (ATC) ATC takes away the worry of undissolved detergent and ensures consistent cleaning results from season to season with warm and cold washes. ATC electronically senses and maintains a uniform water temperature by regulating incoming hot and cold water.
SETTING YOUR CYCLE SELECTOR (TIMER) CONTROL Use this control to choose the agitation time and to start the washer. • For heavy soil and sturdy fabrics, use the full time.
SETTING YOUR RINSE OPTIONS CONTROL A second rinse will remove more detergent residue. It is especially beneficial if extra detergent has been used to remove heavy soils. AUTOMATIC SECOND RINSE Your washer allows you to add an auto- matic second rinse to the ULTRA CLEAN Cycle or PERMANENT PRESS Cycle.
SELF-CLEANING LINT FILTER Lint is filtered from the load automatically - there's no messy cleanup. Your washer features a self-cleaning filter that traps lint from the water while the washer is washing and deep rinsing the laundry. The trapped lint is flushed down the drain automatically.
UNDERSTANDING NORMAL WASHER SOUNDS Your new washer may make sounds that your old one didn't. Because the sounds are unfamiliar, you may be concerned about them.
USING THE LIQUID FABRIC SOFTENER DISPENSER After loading the washer, measure and add the recommended amount offabric softener into the dispenser. Follow manufacturer's directions. NOTE: Pouring too much fabric softener into the dispenser will cause the fabric softener to dispense instantly into the load due to siphoning action.
UNDERSTANDING WHAT HAPPENS IN EACH CYCLE ULTRA CLEAN Fill to selected level T Wash selected time T no spin T Spin T -I ......... Fill to selected level Rinse T Drain - no spin T Spin T Off or 2ND RINSE PERMANENT PRESS PREWASH Fill to _ Fill to selected level selected level T T D @ W sh selected time selected time T T I-! - Partial Drain - .
PREPARING CLOTHES FORWASHING Follow these recommendations to help you prolong the life of your garments. • Close zippers, snaps, and hooks to avoid snagging other items. Remove pins, buckles, and other hard objects to avoid scratching the washer interior.
LOADING Proper loading of your washer con- tributes to proper cleaning and fabric care and reduces machine noise, • Drop items into washer loosely. Fill to the top of the basket (top row of holes). Do not wrap items around the agitator. Items should move easily through wash water for best cleaning and wrinkle-free results.
CLEANING YOUR WASHER Proper care of your washer can extend its life. This section explains how to care for your washer properly and safely. Exterior Wipe up detergent, bleach, and other spills with a soft, damp cloth or sponge as they occur. Occasionally wipe the outside of the washer to keep it looking like new.
Most laundering problems are easily and washer problems. If you need solved if you understand the cause, further assistance, see page 37. Check these lists forcommon laundry Problem Possible Cause Solution Washer Leaks Household ptumbing is leaking. Repair plumbing.
Problem Possible Cause Solution Won't Drain/ Low vottage or using Check electrical source or call Won't Spin/ an extension cord. electrician. Do not use extension Wet Loads cords. (cont.) Cold rinses. Cotd rinses leave loads wetter than warm rinses.
Problem Possible Cause 8olution Machine Power cord not plugged in. Plug in power cord. Stops No power at plug. Check electrical source or call electrician. Fuse blown or circuit Replace fuse or reset circuit breaker. breaker open. If problem continues, call electrician.
Problem Possible Cause 8olution Tearing Overloading. Improper Loads should move freely during use of washer, wash. Wash smaller loads. improper use of chlorine Do not pour chlorine bleach directly bleach. Undiluted bleach on load. Wipe up bleach spills.
KENMORE WASHERS We Service What We Sell "We Service What We Sell" isour assurance you can depend on Sears for service. Your washer has added value when you consider that Sears has service un.
For the repair or replacement parts you need delivered directly to your home Call 7 am - 7 pro, 7 days a week 1-800-366-PART (1-800-366-7278) For in-home major brand repair service Call 24 hours a day.
Ein wichtiger Punkt beim Kauf des Geräts Kenmore 3950144 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Kenmore 3950144 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Kenmore 3950144 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Kenmore 3950144 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Kenmore 3950144 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Kenmore 3950144 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Kenmore 3950144 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Kenmore 3950144. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Kenmore 3950144 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
