Benutzeranleitung / Produktwartung C7478 des Produzenten Kawasaki
Zur Seite of 24
Please read this manual and save it with your original sales receipt. T ools needed for assembly: Phillips Screwdriver , Hammer and Pliers (all not included); Cap Nut Assembly T ool (included). Use only with a Power Wheels ® 12 V olt Battery with Built-in Thermal Fuse and a Power Wheels ® 12 V olt Charger (both included).
Table of Contents Important Information A Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 B W arnings and Caution . . . . . . . . . . . . .
CAUTION • In the unassembled state, this package contains small parts. Adult assembly is required. • Use the charger in dry locations only . W ARNING • Prevent Injuries and Deaths • Direct Adult Supervision Required • Keep Children Within Safe Riding Areas.
Parts C Wheel - 4 • If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product to the store. • Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded.
All Shown Actual Size Part Not Shown : Label Sheet .437 Cap Nut – 6 7 / 16 " W asher - 4 12 V olt Battery Cap Nut Assembly T ool Microphone 12-VOL T CHARGER 12 V olt Charger Pb #10 - 32 Lock Nu.
Parts Diagram D 1. V ehicle Body 2. Cowling 3. Seat 4. Wheel - 4 5. Hubcap - 4 6. Cap Nut - 6 7. Steering Column 8. Handlebar Neck 9. 12 V olt Battery 10. 12 V olt Charger 1 1. Microphone 12. Rear Wheel Driver - 2 13. Grip - 2 14. Handlebar - Front 15 Handlebar - Back 16.
Battery Charging E About Thermal Fuses Y our Power Wheels ® 12 volt battery is equipped with a built-in thermal fuse. The thermal fuse is a self-resetting safety device which automatically “trips” and shuts down operation of the vehicle if the vehicle is overloaded or the driving conditions too severe.
Battery Charging • Plug the charger connector into the battery . • Plug the charger into a standard 120 volt wall outlet . Note: If power flow to the wall outlet is controlled by a switch, make sure the switch is “ON”. • Before first-time use, charge the battery for at least 18 hours.
2 Assembly • Fit a .437 cap nut onto one end of the rear axle. • T ap the other end of the rear axle with a hammer to secure the cap nut on the end of the rear axle. Hint: Y ou may want to position the cap nut on a scrap block of wood to protect the assembly surface.
W asher Rear Wheel Driver Cap Nut Cap Nut Assembly T ool Hubcap • Slide a washer onto the rear axle. • Slide the rear wheel driver onto the rear axle. Make sure the rear wheel driver fits onto the pins in the motor assembly . • Slide a wheel onto the rear axle.
Assembly TM • Press the tab under the back of the seat and lift to remove the seat. • Make sure the motor harness wires are positioned in the channel to prevent them from being pinched between the cowling and vehicle body . • Fit the rectangular opening in the cowling over the shifter handle.
Assembly 12 • Lift the front end of the vehicle. • Slide the straight end of the steering column through the hole in the upper steering linkage and out through the hole in the vehicle body . • Insert the curved end of the steering column into the hole in the lower steering linkage.
Assembly 13 • Fit the front handlebar assembly into the front of the handlebar . Screw Pegs Screw Pegs Holes Holes Handlebar Front Handlebar Housing • Fit the handlebar assembly onto the end of the steering column. Make sure the handlebar grip area points towards the rear of the vehicle.
R ® Assembly 14 • Bend the plastic tip at the end of the microphone cord so that it forms a "T". • Insert the "T" end of the microphone cord into the hole in the handlebar . Pull gently on the microphone cord to make sure it is secure in the handlebar .
Label Decoration G 15 Proper label application will help to keep the labels looking their best! When applying labels, keep the following guidelines in mind: • W ash your hands before applying the labels. • Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils.
IMPORT ANT! Use only a Power Wheels ® 12 volt battery with built-in thermal fuse. Use of any other battery will damage your vehicle. Make sure that you charge the battery for at least 18 hours using the enclosed Power Wheels ® 12 volt charger before operating your vehicle for the first time.
If a battery leak develops, avoid contact with the leaking acid and place the damaged battery in a plastic bag. See information below for proper disposal. If acid comes in contact with skin or eyes, flush with cool water for at least 15 minutes and call a physician.
T each Safety Rules to Children While children can quickly develop the skill necessary to drive this vehicle, it is important to remember that their judgment skills are still very immature. Unsupervised driving by children can lead to serious injury .
• Make sure the shifter is in the LOW SPEED position. • Press the foot pedal. The vehicle will drive forward at a maximum of 2 1 / 2 mph. • Help your child practice steering to learn how far and how quickly to turn the handlebar when driving forward in low speed.
IMPORT ANT! T o avoid damaging the motors and gears, stop the vehicle before shifting between low and high speed. • Make sure the shifter is in the HIGH SPEED position.
Problems and Solutions Guide IMPORT ANT! If you experience a problem with your vehicle, first check the Problems and Solutions Guide below . If you still experience a problem, please contact Power Wheels ® Consumer Relations, toll-free at 1-800-348-0751 between 8 AM and 6 PM (EST) Monday through Friday .
Problems and Solutions Guide Short run time Undercharged battery Charge the battery . A new batter y should have been charged for at least 18 hours before using the vehicle for the first time. After first-time use, recharge the battery for at least 14 hours after each use.
Problems and Solutions Guide Problem Possible Cause Solution When the foot pedal is pressed Operation of vehicle in low speed It is possible that only one rear wheel may spin when both only one rear wheel spins rear wheels ar e raised off the gr ound and the vehicle is in low speed.
PRINTED IN MEXICO C7478pr-0920 IMPOR T ANT! DO NOT use this vehicle for the first time until you have charged the battery for 18 hours. Remember to … ✔ Charge the battery immediately after each use. ✔ Charge the battery once a month during storage, even if the vehicle has not been used.
Ein wichtiger Punkt beim Kauf des Geräts Kawasaki C7478 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Kawasaki C7478 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Kawasaki C7478 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Kawasaki C7478 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Kawasaki C7478 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Kawasaki C7478 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Kawasaki C7478 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Kawasaki C7478. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Kawasaki C7478 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
