Benutzeranleitung / Produktwartung SIP 480I des Produzenten Aastra
Zur Seite of 504
Administrator Guide Release 1.4.1 SIP IP PHONE 480i, 480i CT , 91 12i, 9133i 41-001 129-00 Rev 09.
Aastra T elecom will not accept liability for any damages and/or long dist ance charges, which result from unauthorized and/or unl awful use. While every effort has been made to ensure accuracy , Aastra T elecom will not be liable for technical or editorial erro rs or omissions contained within th is documentation.
41-001129-00 Rev 09 , Release 1.4.1 iii Software License Agreement Aastra T elecom Inc., hereinafter known as " Seller", g rants to Cu stomer a personal, worldwide, non-transferable, non-sublicenseable and non-exclusive , restricted use license to use Software in ob ject form solely with the Equipment for which the Software was inte nded.
.
41-001129-00 Rev 09, Relea se 1.4.1 v Contents Contents Preface About this guide ........... ................ ............. ............. ................ ............. ............. ............... . xiii . Introduction ........ ............. .......
vi 41-001129-00 Rev 09 , Release 1.4.1 Contents S tatus ........... ................ ............. ............. ............ ............. ................. ............ ............ 2 -6 . Operation ........... ................ ............. .......
41-001129-00 Rev 09, Relea se 1.4.1 vii Contents Virtual LAN (optional) ... ............. ............. ................ ............. ................ ............. ...... 4-22 . T ype of Service (T oS), Quality of Service (QoS), and D iffServ QoS ..
viii 41-001129-00 Rev 09 , Release 1.4.1 Contents Priority Alerting ...... ............. ................ ............. ................ ............. ............. ........... 5-124 . S tuttered Dial T one .......... ................ ............. ..
41-001129-00 Rev 09, Relea se 1.4.1 ix Contents Chapter 9 T roubleshooting . About this chapter ..... .......... ... ............. ............. ................ ............. ............. ............. ........ 9 -1 . T roubles hooting ........... .
x 41-001129-00 Rev 09 , Release 1.4.1 Contents Directory Settings ...................... ............. ............ ................. ............. ................ ..... A-63 . Callers List Settings .............. ............. ................ .....
41-001129-00 Rev 09, Releas e 1.4.1 xi Contents Appendix C Configuring the IP Phone at the Asterisk IP PBX . About this appendix ............ ............. ................ ............. ................ ............. ............. ....... C -1 . IP Phone at the Asterisk IP PBX .
xii 41-001129-00 Rev 09 , Release 1.4.1 Contents Directory Object (Directory List Screen) (480i only) ..... ................ ................ ......... G -12 . S tatus Message Object (Idle Sc reen) ..... ............ ................. ................
41-001129-00 Rev 09 , Release 1.4.1 xiii Preface Preface About this guide Introduction This SIP IP Phone Administrator Guide provides information on the basic network setup, operation, and main tenance of the IP p hones, Models 480i, 48 0i Cordless (480i CT), 91 12i, and 9133i.
About this guid e xiv 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Preface Other Document ation The IP phone do cumentation consists of: • <Model-specific> SIP IP Phone In.
About this guide 41-001129-00 Rev 09, Release 1.4.1 xv Software License Agreement Contents Chapters and appendi xes in this guide This guide contains the following chap ters and appendixes: For Go to .
.
41-001129-00 Rev 09 , Release 1.4.1 1-1 Overview Chapter 1 Overview About this chapter Introduction This chapter briefly describes the IP Phone Models, and provides informatio n about installing the IP phone firmware. It also describes the firmware and configuration files that the IP phone models use for operation.
IP Phone Models 1-2 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Overview IP Phone Models Description The IP Phone Models 480i, 480i CT , 91 12i, and 9133i commun icate over an IP network allowing you to receive and place calls in the same manner as a regular business telephone.
Firmware Installa tion Information 41-001129-00 Rev 09, Release 1.4.1 1-3 Overview Overview Firmware Inst allation Information Description The firmware setup and installation for th e IP phone can be .
Firmware Installa tion Information 1-4 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Overview Inst allation Requirement s The following are general requirements for setting up and using your SIP IP phone: • A SIP-based IP PBX system or networ k installed and running with a number created for the new IP phone.
Firmware Installa tion Information 41-001129-00 Rev 09, Release 1.4.1 1-5 Overview Overview Configuration Server Requirement A basic requirement for setting up the IP phone is to have a configuration server . The configuration server allows you to: • S tore the firmware images that you need to download to your IP ph one.
Firmware and Configuration Files 1-6 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Overview Firmware and Configuration Files Description When the IP phone is init ialized for the first time, DHCP is enabled by default.
Firmware and Configuration Files 41-001129-00 Rev 09, Release 1.4.1 1-7 Overview Overview Configuration File Precedence Aastra IP phones can accept two sources of configuration data: • The server configuration most r ecently downloaded/cached from the configuration server files, aastra.
Firmware and Configuration Files 1-8 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Overview References For setting up and configuring the IP pho ne using either the IP phone UI, the Aastra W eb UI, or the configuration files, see Chapter 4, “Configuring the IP Phones.
41-001129-00 Rev 09 , Release 1.4.1 2-1 Configuration Interface Methods Chapter 2 Configuration Interface Methods About this chapter Introduction This chapter describes the methods you can use to configure the IP phones.
IP Phone UI 2-2 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Configuration Interface Methods IP Phone UI The IP phone UI pro vides an easy way to access features and functions fo r using and configuring the IP phon e.
IP Phone UI 41-001129-00 Rev 09, Release 1.4.1 2-3 Configuration Interface Meth ods Configuration Interface Methods The following illustration indicates t he loca tion of the Opti ons Key on each phone model.
IP Phone UI 2-4 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Configuration Interface Methods Using the Options Key Fro m the 480i/4 80iCT : From th e 480i CT handset: Fro m the 91 12i and 9133i: Ste p Action 1 Press % on the phone to enter the Options List.
Aastra Web UI 41-001129-00 Rev 09, Release 1.4.1 2-5 Configuration Interface Meth ods Configuration Interface Methods Aastra W eb UI Description An administrator can setup and co nfigure the IP phone using th e Aastra W eb UI . The Aastra W eb UI supports Internet Explorer an d Gecko engine-based bro wsers like Firefox, Mozilla or Netscape.
Aastra Web UI 2-6 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Configuration Interface Methods The following illustration is an example of a Network S tatus screen for the 480i IP phone. The following catego ries display in the side menu of th e Aastra W eb UI: St a t u s , Operation, Basic Settings, Advanced Settings .
Aastra Web UI 41-001129-00 Rev 09, Release 1.4.1 2-7 Configuration Interface Meth ods Configuration Interface Methods Operation The Operation section provides th e following options: Basic Settings The Basic Settings section provides the following options: Heading Description User Passwor d Allows you to change user password.
Aastra Web UI 2-8 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Configuration Interface Methods Advanced Settings The Advanced Setti ngs section provides th e following options: He.
Aastra Web UI 41-001129-00 Rev 09, Release 1.4.1 2-9 Configuration Interface Meth ods Configuration Interface Methods Enabling/Disabling the Aastra W eb UI The Aastra W eb UI is enabled by default on the IP phones. A System Administra tor can disab le the Aast ra W eb UI on a single phone or on all ph ones if required using the configuration files.
.
41-001129-00 Rev 09 , Release 1.4.1 3-1 Administrator Options Chapter 3 Administrator Options About this chapter Introduction The IP phones provide spec ific options on the IP Phone UI that allow an administrator to change or set features and configuration information as required.
About this chapter 3-2 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Administrator Options Configuration Server Settings page 3-21 Firmware Update Features page 3-22 To p i c Page.
Administrator Level Options 41-001129-00 Rev 09, Release 1.4.1 3-3 Administrator Options Administrator Options Administrator Level Options Description There are specific options available only to an Administrator on the IP phon es.
Administrator Level Options 3-4 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Administrator Options Aastra Web UI Options The following are admi nist rator options in the Aastra W .
Administrator Level Options 41-001129-00 Rev 09, Release 1.4.1 3-5 Administrator Options Administrator Options Using the Configuration Files When you use the configuration files to configure the IP phones, yo u must use a text-based editing application to open the configuration file (aastra.
Administrator Level Options 3-6 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Administrator Options Phone St atus The Phone S tatus on the IP Phone displays the network status and firmware version of the IP phone. This o ption also allows you to restart the phone, and set the phone to fact ory defaults.
Administrator Level Options 41-001129-00 Rev 09, Release 1.4.1 3-7 Administrator Options Administrator Options 480i/480i CT The following info rmation displays for phon e status on the IP phone UI: • Network Port (91 12i only) Displays the network status of the Ethernet port at the back of the phone.
Administrator Level Options 3-8 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Administrator Options • Factory Default (adm in only) This option lets you reset the phone to its factory defau lt settings.
Administrator Level Options 41-001129-00 Rev 09, Release 1.4.1 3-9 Administrator Options Administrator Options The following information disp lays for phon e status in the Aastra W eb UI at the location S tatus->System Information . This information is available to the user and the administrator as read-only .
Basic Preferences (Aastra Web UI) An administrator can configure the follo wing basic preferences using the Aastra We b U I : • Idle Display Name 1 and 2 The names that display on the idle scree n ra ther than the user name and phone number .
Administrator Level Options 41-001129-00 Rev 09, Rel ease 1.4.1 3-11 Administrator Options Administrator Options • Key Mapping Allows you to set the Redial and/or Conf keys as speedial keys.
Administrator Level Options 3-12 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Administrator Options Network The following paragrap hs describe the network paramete rs you can config ure on the IP phone.
Administrator Level Options 41-001129-00 Rev 09, Rel ease 1.4.1 3-13 Administrator Options Administrator Options • Primary DNS Primary Domain Name Servic e. A service that transl ates domain names into IP addresses. T o assign static DNS addresses, disable DHCP .
Administrator Level Options 3-14 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Administrator Options T ype of Service (T oS), DSCP Network settings also allows you to set T ype of Service (T oS) and Differentiated Services Code Point (DSCP).
Administrator Level Options 41-001129-00 Rev 09, Rel ease 1.4.1 3-15 Administrator Options Administrator Options Basic SIP Authentication Settings • Scre en Name Name that displays on the idle screen. V alid values are up to 20 alphanumeric characters.
Administrator Level Options 3-16 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Administrator Options Basic SIP Network Settings • Proxy Server ( Proxy IP in the configuration files). IP ad dress of the SIP proxy server . Up to 64 alphanumeric characters.
Administrator Level Options 41-001129-00 Rev 09, Rel ease 1.4.1 3-17 Administrator Options Administrator Options • Explicit MWI Subscription If the IP phone has a message waiting subs cription with the Service Provider , a Message W aiting Indicator (MWI) (LED or display icon) tells the user there is a message on the IP Ph one.
Administrator Level Options 3-18 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Administrator Options • BLF Subscription Period Specifies the time period, in seconds, that the BLF feature becomes active again after a software/firmware upgrade or a fter a reboot o f the IP phon e.
Administrator Level Options 41-001129-00 Rev 09, Rel ease 1.4.1 3-19 Administrator Options Administrator Options • DTMF Method (not configurable via IP phone UI). Sets the dual-tone multifrequency (DTMF) method to us e on the IP pho ne on a global or p er- line basis.
Administrator Level Options 3-20 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Administrator Options The functions you ca n configure are: • line (480i, 480i CT , 9133i) • spe.
Administrator Level Options 41-001129-00 Rev 09, Rel ease 1.4.1 3-21 Administrator Options Administrator Options Configuration Server Settings The configuratio n server stores the firmwa re images, configuration files, and software when performing so ftware upgrades to the IP pho ne.
• Tim e (2 4 - ho u r ) (Not configurable via IP phone UI). Sets the time of da y in a 24-hour period for the IP phone to be automatically updated (auto-resync ). This parameter works with TFTP , FTP , and HTTP servers. • XML Push Server List (not configurable via IP phone UI).
41-001129-00 Rev 09 , Release 1.4.1 4-1 Configuring the IP Phones Chapter 4 Configuring the IP Phones About this chapter Introduction This chapter provides the information requ ired to configure the administrative options on the IP p hones.
About this chapter 4-2 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Configuring the IP Phones Network T ime Servers page 4-32 Session Initiation Protocol (SIP) Settings page 4-38 .
Overview 41-001129-00 Rev 09, Release 1.4.1 4-3 Configuring the IP Ph ones Configuring the IP Phones Overview An administrator can configure the IP Phone Network and SIP options from the phone UI, from the Aastra W eb UI, or the configuration files. Administrator level options are password protected in both the IP phone UI and the Aastra W eb UI.
Basic Network Settings 4-4 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Configuring the IP Phones Basic Network Settings This section describes the basic ne twork settings on the IP phone.
Basic Network Settings 41-001129-00 Rev 09, Release 1.4.1 4-5 Configuring the IP Ph ones Configuring the IP Phones Configuring DHCP Y ou can enable and disable DHCP using the configuration files, the IP phone UI, or the Aastra W eb UI.
Basic Network Settings 4-6 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Configuring the IP Phones . Aastra Web UI Ste p Action 1 Click on Advanced Settings->Networ k->Basic Network Settings. 2 Enable the " DHCP " field by chec king the check box.
Basic Network Settings 41-001129-00 Rev 09, Release 1.4.1 4-7 Configuring the IP Ph ones Configuring the IP Phones Configuring Network Settings Manually If you disabl e DHCP on your phon e, you need to configure the network settings manually .
Basic Network Settings 4-8 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Configuring the IP Phones . 6S e l e c t DNS and ente r a Primary and/or Secondary DNS server . 7 For 91 1 2i/9133i: Press Set to save the changes. For 480i/480i CT : Press Done to save the changes.
Basic Network Settings 41-001129-00 Rev 09, Release 1.4.1 4-9 Configuring the IP Ph ones Configuring the IP Phones 3 Enter a subnet mask in the Subnet Mask field. 4 Enter a gateway address i n the Gateway field. 5 Enter a Primary DNS in the Primary DNS field, and/or a secondary DNS in the Secondary DNS field.
Configuration Server Protocol 4-10 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Configuring the IP Phones Configuration Server Protocol Y ou can download new versions of fi rmware and confguration files from the configuration serv er to the IP phone usin g any of t he following types of pro tocols: TFTP , FTP , HTTP .
Configuration Server Protocol 41-001129-00 Rev 09, Rel ease 1.4.1 4-11 Configuring the IP Ph ones Configuring the IP Phones 3S e l e c t Download Protocol.
Configuration Server Protocol 4-12 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Configuring the IP Phones 7 Enter the IP address of the protocol server (in dotted decimal format). Use the following table to configure the appl icable server .
Configuration Server Protocol 41-001129-00 Rev 09, Rel ease 1.4.1 4-13 Configuring the IP Ph ones Configuring the IP Phones 8 For 91 1 2i/9133i: Press Set to save the changes. For 480i/480i CT : Press Done to save the changes. 9 Press Done to finish configuring th e configuration server pr otocol for the IP phone.
Configuration Server Protocol 4-14 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Configuring the IP Phones 2 Select the protocol from the " Download Pro tocol " list box. The IP phone uses the protocol you select to do wnload new firmware and con figuration files from the configuration server .
Advanced Network Settings 41-001129-00 Rev 09, Rel ease 1.4.1 4-15 Configuring the IP Ph ones Configuring the IP Phones Advanced Network Settings Y ou can set advanced network settings on the IP phone.
Advanced Network Settings 4-16 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Configuring the IP Phones Nortel Proxy/Registrar The phone at IP address 10.
Advanced Network Settings 41-001129-00 Rev 09, Rel ease 1.4.1 4-17 Configuring the IP Ph ones Configuring the IP Phones Nortel Networks NA T Nortel Netw orks provides a proprietary solution to support co nnectivity to their proxies from phones placed behind devices (such as routers or firewalls) that use NA T .
Advanced Network Settings 4-18 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Configuring the IP Phones . 6 For 91 1 2i/9133i: Press Change to set Y es (enable) o r No (disable) for NA T on a Nortel netw ork. For 480i/480i CT : Press Change to set Y es (enable) o r No (disable) for NA T on a Nortel netw ork.
Advanced Network Settings 41-001129-00 Rev 09, Rel ease 1.4.1 4-19 Configuring the IP Ph ones Configuring the IP Phones Configuring NA T Addres s and Port (optional) Y ou can also confi gure a specific NA T address and po rt on the IP phon e using the configuration files, IP Phone UI, or Aastra W eb UI.
Advanced Network Settings 4-20 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Configuring the IP Phones 3S e l e c t NA T . 4S e l e c t NA T Settings. 5S e l e c t NA T IP . 6 Enter a public IP addre ss of your NA T device in d otted-decimal format.
Advanced Network Settings 41-001129-00 Rev 09, Rel ease 1.4.1 4-21 Configuring the IP Ph ones Configuring the IP Phones . Aastra Web UI Ste p Action 1 Click on Advanced Settings->Networ k->Advanced Network Settings. 2 Enter a NA T IP address in the " NA T IP " field.
Advanced Network Settings 4-22 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Configuring the IP Phones V irtual LAN (optional) V irtual Local Area Network (VLAN) is a feature on t.
Advanced Network Settings 41-001129-00 Rev 09, Rel ease 1.4.1 4-23 Configuring the IP Ph ones Configuring the IP Phones T ype of Service (T oS), Quality of Service (QoS), and Di ffServ QoS T oS is an octet as a field in the standard IP header . It is used to classify the traffic of the different QoSs.
Advanced Network Settings 4-24 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Configuring the IP Phones DSCP Range/VLAN Priority Mapping DSCP bits in the T oS field of the IP head .
Advanced Network Settings 41-001129-00 Rev 09, Rel ease 1.4.1 4-25 Configuring the IP Ph ones Configuring the IP Phones DSCP Range/VLAN Priority The following table id entifies the defaul t DSCP of protocols. Configuring T ype of Service (T oS)/DSCP (optional) Use the following procedures to conf igure T oS/DSCP on the IP phon e.
Advanced Network Settings 4-26 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Configuring the IP Phones IP Phone UI Ste p Action 1 For 91 1 2i/9133i: Press I on the phone to enter the Options List. For 480i/480i CT : Press % on the phone to enter the Opti ons List.
Advanced Network Settings 41-001129-00 Rev 09, Rel ease 1.4.1 4-27 Configuring the IP Ph ones Configuring the IP Phones . Aastra Web UI Ste p Action 1 Click on Advanced Settings->Networ k->T ype of Se rvice,DSCP . 2 Choose a Protocol (SIP , RTP , and/or RT CP), and enter a value from 0 to 63 .
Advanced Network Settings 4-28 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Configuring the IP Phones Configuring VLAN (optional) Use the following procedures to confi gure VLAN on the IP phone. Note: VLAN is disabled by default.
Advanced Network Settings 41-001129-00 Rev 09, Rel ease 1.4.1 4-29 Configuring the IP Ph ones Configuring the IP Phones 11 S e l e c t VLAN ID and enter a value from 1 to 4094 to specify the VLAN ID of Port 0. 12 Press Done to save the change. 13 Select Priority .
Advanced Network Settings 4-30 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Configuring the IP Phones . Aastra Web UI Ste p Action 1 Click on Advanced Settings->Networ k->VLAN. T o globally enable/disable VLAN an d set priority for non-IP packets : 2 Enable VLAN by checking the VLAN Enable field check box.
Advanced Network Settings 41-001129-00 Rev 09, Rel ease 1.4.1 4-31 Configuring the IP Ph ones Configuring the IP Phones 8 Click to save your changes. Note: The session prompts you to rest art the IP phone to apply the config uration settings. 9S e l e c t Opera tion->Reset and click .
Advanced Network Settings 4-32 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Configuring the IP Phones Network T ime Servers Network T ime Protocol (NTP) is a protocol that the IP phone uses to synchronize the phone clock time with a computer (configuration server) in the network.
Advanced Network Settings 41-001129-00 Rev 09, Rel ease 1.4.1 4-33 Configuring the IP Ph ones Configuring the IP Phones Use the following procedure to enable/d isab le and config ur e the NTP Servers using the Aastra W eb UI.. 4 For 91 12i/9133i: Press Change to enable the T ime Server , For 480i/480i CT : Press Enable to enable the T ime Server .
Advanced Network Settings 4-34 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Configuring the IP Phones Setting T ime/Date on IP Phones In addition to enabling/disabl ing the time server , you ca n also set the time and date, set the time and date format, set th e time zone, and set daylight savings time on the IP phones.
Advanced Network Settings 41-001129-00 Rev 09, Rel ease 1.4.1 4-35 Configuring the IP Ph ones Configuring the IP Phones IP Phone UI Ste p Action 1 For 91 1 2i/9133i: Press I on the phone to enter the Options List. For 480i/480i CT : Press % on the phone to enter the Opti ons List.
Advanced Network Settings 4-36 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Configuring the IP Phones 11 For 91 1 2i/9133i: Press Set to save the date you entered. For 480i/480i CT : Press Done to save the date you entered. 12 Select Date Format.
Advanced Network Settings 41-001129-00 Rev 09, Rel ease 1.4.1 4-37 Configuring the IP Ph ones Configuring the IP Phones Set Daylight Savings Time: 19 Select Daylight Savings .
Advanced Network Settings 4-38 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Configuring the IP Phones Session Initiation Protocol (SIP) Settings The IP phone uses the information in the Session Initiation Protocol (SIP) settings to register at the IP PBX.
Advanced Network Settings 41-001129-00 Rev 09, Rel ease 1.4.1 4-39 Configuring the IP Ph ones Configuring the IP Phones SIP Per-Line Parameters Specific sets of SIP parameters are inter-dependent with each other .
Advanced Network Settings 4-40 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Configuring the IP Phones SIP Precedence Example The followi ng exampl e shows th e SIP pr oxy feature and example schema for storage and parsing of the SI P configuration parameters.
Advanced Network Settings 41-001129-00 Rev 09, Rel ease 1.4.1 4-41 Configuring the IP Ph ones Configuring the IP Phones Backup Proxy/Registrar Support The IP phones support a backup SIP p roxy and backup SIP registrar feature.
Advanced Network Settings 4-42 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Configuring the IP Phones Y ou can configure SR V lookup using the configuration files ( aastra .
Advanced Network Settings 41-001129-00 Rev 09, Rel ease 1.4.1 4-43 Configuring the IP Ph ones Configuring the IP Phones IP Phone UI Ste p Action 1 For 91 1 2i/9133i: Press I on the phone to enter the Options List. For 480i/480i CT : Press % on the phone to enter the Opti ons List.
Advanced Network Settings 4-44 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Configuring the IP Phones . Aastra Web UI Ste p Action 1 For global configura tion, click on Advanced Setting s->Global SIP->Basic SIP Settings.
Advanced Network Settings 41-001129-00 Rev 09, Rel ease 1.4.1 4-45 Configuring the IP Ph ones Configuring the IP Phones Or , for per-line configuration, click on Advanced Setting s->Line N (1-9) . T o configure SIP authe ntication settings: 2 In the " Screen Name " field, enter the screen name th at displays on the id le screen.
Advanced Network Settings 4-46 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Configuring the IP Phones T o configure SIP network se ttings: 9 In the " Proxy Server " field, enter an IP address or fully qu alified host name of the SIP proxy server .
Advanced Network Settings 41-001129-00 Rev 09, Rel ease 1.4.1 4-47 Configuring the IP Ph ones Configuring the IP Phones Configuring Advanced SIP Settings (optional) Using the configuration files or th.
Advanced Network Settings 4-48 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Configuring the IP Phones . Aastra Web UI Ste p Action 1 Click on Advanced Settings->G lobal SI P->Advanced SIP Settings. 2 Enable the " Explicit MWI Subscription " field by checking the check box.
Advanced Network Settings 41-001129-00 Rev 09, Rel ease 1.4.1 4-49 Configuring the IP Ph ones Configuring the IP Phones 5 In the " Time r 1 and Timer 2 " fields, enter a time, in millisecond s, that will apply to an IP phone session. These timers are SIP transaction layer timers defined in RFC 3261.
Advanced Network Settings 4-50 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Configuring the IP Phones Real-time T ransport Protocol (RTP) Settings Real-time T ransport Protocol (R TP) is used as the bearer path for voice packets sent over the IP network.
Advanced Network Settings 41-001129-00 Rev 09, Rel ease 1.4.1 4-51 Configuring the IP Ph ones Configuring the IP Phones Aastra IP phon es support the International T eleco mmunications Union (ITU) transmission standards for the following CODECs: • W aveform CODECs : G .
Advanced Network Settings 4-52 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Configuring the IP Phones Customized Codec Preference List Y ou can also configure the IP phones to use preferred Codecs.
Advanced Network Settings 41-001129-00 Rev 09, Rel ease 1.4.1 4-53 Configuring the IP Ph ones Configuring the IP Phones Out-of-Band DTMF The IP phones support out-of-ban d Dual-T one Multifrequency (DTMF) mode according to RFC283 3. In the Aastra W e b UI, you can enable or disab le this feature as required.
Advanced Network Settings 4-54 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Configuring the IP Phones Configuring RTP Features Use the following procedures to confi gure R TP , basic Codecs, customized Codecs, DTMF , and silence supp ression on the IP phone.
Advanced Network Settings 41-001129-00 Rev 09, Rel ease 1.4.1 4-55 Configuring the IP Ph ones Configuring the IP Phones . Aastra Web UI Ste p Action 1 Click on Advanced Settings ->Globa l SIP->RTP Settings. 2 Enter an R TP Port Base in the RTP Port field.
Advanced Network Settings 4-56 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Configuring the IP Phones 5 Enter a " Customized Co dec Preferenc e List " which all payload=8;ptime=10; silsupp=on; payload=0;ptime=10; silsupp=off V alid va lues are: 6 ISelect a method to use from the DTMF Method list box.
41-001129-00 Rev 09 , Release 1.4.1 5-1 Operational Features Chapter 5 Operational Features About this chapter Introduction The IP phones have specific operational features you can configure to customize your IP phone. This chapter describes each feature and provides procedures for configuring your phone to use these features.
About this chapter 5-2 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Operational Features Last Call Return (lcr) (Syl antro Servers only) page 5-58 Call Forwarding page 5-63 Caller.
Operational Features 41-001129-00 Rev 09, Release 1.4.1 5-3 Operational Featu res Operational Features Operational Features Description The IP phone has the following operational features: Feature Description User Passwor ds Allows you to change user passwords on the IP phone.
Operational Features 5-4 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Operational Features Last Call Return (lcr) (Sylantro Servers only) Allows you to configure a " last call return" function on a softkey or programmable key .
Operational Features 41-001129-00 Rev 09, Release 1.4.1 5-5 Operational Featu res Operational Features The following paragraphs describe each of these features. Call W aiting T one Allows you to enable or disable the playing of a call waiting tone when a caller is on an active call and a new call comes into the phone.
Operational Features 5-6 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Operational Features User Passwords A user or an administrator can change the user pas swords on the phone using the configuration files, the IP phone UI, or the Aastra W eb UI.
Operational Features 41-001129-00 Rev 09, Release 1.4.1 5-7 Operational Featu res Operational Features Aastra Web UI 1 Click on Operation->User Password . 2 In the " Current Password " field, ente r the current u ser pass word. 3 In the " New Password " field, enter the new user password.
Operational Features 5-8 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Operational Features Administrator Passwords An administrator can change the admini strator passwords on the phone usin g the configuration files only . An administrator can also assign a passw ord for using the Options key on the IP phone.
Operational Features 41-001129-00 Rev 09, Release 1.4.1 5-9 Operational Featu res Operational Features Hard Keys There are hard keys on your p hone, such as Hold, Redial, Xfer , Icom and Conf (Hold and Icom not available on t he 91 12i and 9133i) that are configured for specific call-handling features.
Setting Redial and Conf Keys a s Speedials Y ou can set the Redial and Conf hard keys on the IP phone to use as speeddial keys. When the Redial or Conf key is pressed, the number configured for the key automatically speed dials. If no number is config ured, the Redial and Co nf keys return to their original functionality .
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-11 Operational Featu res Operational Features Aastra Web UI 1 Click on Basic Settings-> Preferences . 2 In the Key Mapp ing section, en ter a number in the " Map Redial Key T o " field , that the IP phone will use to speedial when the Redial key is pressed.
Operational Features 5-12 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features Softkeys/Programmable Keys Y ou can configure the softkeys (4 80 i/480i CT) and prog rammable keys (91 12i/9133i) to perform specifi c functions on the IP phones.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-13 Operational Featu res Operational Features • spre - Indicates the softkey or programmable key is set to automati cally activate specific services offered by the ser ver .
Operational Features 5-14 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features By default, the softkeys display in th e states of idle, connected, incoming, and outgoing. All states a re enable d. Y ou can enable or disable the softkey st ates using the configuration files or the Aastra W eb UI.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-15 Operational Featu res Operational Features Configuration Example The following example illustrates the use of the "softkeyN stat es" parameter , and the "softkeyN type" para meter with a value of empty .
Operational Features 5-16 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features The following table provides the numbe r of softkeys and pro grammable ke ys you can configure, and the number of lines available for each type of phone.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-17 Operational Featu res Operational Features Configuring Softkeys and Programmable Keys Use the following procedures to confi gur e the softkeys and programmable keys on the IP phone.
Operational Features 5-18 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features For the 91 12i/9133i: Click on Operation->Progra mmable Keys. 91 12i Screen Note: Only two programmable keys are available on the 91 12i.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-19 Operational Featu res Operational Features 3 For the 480i/480i CT , in the " Label " field, enter a label for the softkey . 4 In the " Va l u e " field, enter a value to associate with the so ftkey o r programmable key .
Operational Features 5-20 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features 480i Cordless (CT) Feature Keys In addition to the softk eys on the 480 i CT , this phone also has handset keys you can configure with specific features.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-21 Operational Featu res Operational Features Feature Key Programming Guidelines The following are guidelines to use when pr ogramming the fe.
Operational Features 5-22 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features Programming Feature Keys Y ou can program up to 15 featu re keys on the 480i CT IP phone usin g the Aastra W eb UI. Use the following pro cedure to program the featu re keys on your 48 0i CT Base Station and all paired handsets.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-23 Operational Featu res Operational Features 5 Select the function fo r that handset key from the " Key Functio n " field. 6 Click to save the function you selected to the handset key .
Operational Features 5-24 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features Suppressing DTMF Playback A feature on the IP phones allows us ers and administrators to enable or disable the suppression of DTMF playback when a nu mber is dialed from the softkeys and programmable keys.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-25 Operational Featu res Operational Features Aastra Web UI 1 Click on Basic Settings-> Preferences->General. 2 Enable the " Suppr ess DTMF Playback " field by checking the check box.
Operational Features 5-26 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features Busy Lamp Field (BLF) (480i/4 80i CT/9133i only ) The BLF feature on the IP phones allows a specific extension to be monitored for state changes.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-27 Operational Featu res Operational Features BLFList Setting (For use with the Br oadSoft Broadworks Rel 13 or higher platfo rm only) The BLFList feature on the IP phones is specifically design ed to support the BroadSoft Broadworks Rel 13 Busy Lamp Field feature.
Operational Features 5-28 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features Asterisk BLF Configuration Y ou can enable the BLF feature on Asteri sk to enable monitoring for specific extensions. BLF on Asterisk is possibl e through the “hint” extension parameter .
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-29 Operational Featu res Operational Features Configuring BLFs Use the following procedures to confi gur e BLF and BLFList on the IP phone.
Operational Features 5-30 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features On the 9133i : Click on Operation->Progra mmable Keys. Note: Y ou can configure up to 7 programmable keys on the 9133i. 2 Select a softkey or programmable key to configure.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-31 Operational Featu res Operational Features 8 In the " BL F List URI " field, enter the name of the BLF li st defined on the BroadSoft BroadWorks Busy Lamp field page for your particular user .
Operational Features 5-32 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features Directed Call Pickup (B LF Call Interception) (480i/480i CT/9133i) Directed call pickup is an enhancement to the existing BLF feature found in 480i/ 480i CT and 913 3i.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-33 Operational Featu res Operational Features Configuring Directed Call Pickup Use the following procedure to enable or di sable the Directed Call Pickup featu re on the IP phone.
Operational Features 5-34 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features 3 Enable the " Play a Ring Splash " field by checking the check box. (Disable this field by unchecki ng the box). Default is disabled.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-35 Operational Featu res Operational Features BLF Subscription Period (480i/480i CT/9133i) On the IP phones, you can set the time period, in seconds, that the IP phone resubscribes the BLF subscription service afte r a software/firmware upgrade or after a reboot of the IP phon e.
Operational Features 5-36 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features Aastra Web UI 1 Click on Advanced Settings->Glo bal SI P->Advanced SIP Settings. 2 Enter a value, in seconds, from 120 (2 min) to 3600 (1 hour) in the " BLF Subscripti on Period " field.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-37 Operational Featu res Operational Features Do Not Disturb (DND) The IP phones have a feature you can enable called "Do not Disturb (DND). Y ou can configure DND on softkeys and programmable keys using the Aast ra W eb UI or the configuration files.
Operational Features 5-38 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features Aastra Web UI 1 Click on Operation->Progra mmable Keys. 2 Select a hard key to configure. 3 In the " Ty p e " field, select " do not disturb ".
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-39 Operational Featu res Operational Features Bridged Line Ap pearance (BLA) (480i/480i CT/9133i only ) A SIP bridge line appearance (BLA) on th e IP phones allows multiple devices to share a single directory address (DA).
Operational Features 5-40 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features The following table shows the number of lines that can be set to BLA for each model phone. Configuring BLA Y ou can configure BLA on a gl obal or per -line basis using the configuration files or the Aastra W eb UI.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-41 Operational Featu res Operational Features Per-Line BLA Y ou configure BLA on a per -line basis in the configuration files using the follo.
Operational Features 5-42 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features For ININ Server When configuring the BLA feature on an ININ server , the value set for.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-43 Operational Featu res Operational Features Aastra Web UI 1 For global con figuration of BLA: Click on Advanced Settings->G lobal SIP->Basic SIP Authentication Settings.
Operational Features 5-44 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features For per-line configurati on of BLA: Click on Advanced Settings->Line N (1-9). In the " Line Mode " field, select the BLA option.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-45 Operational Featu res Operational Features Using a BLA Line on the IP Phone If you have either a global or per -line BL A configuration, and you want to share a call on the line with a BLA group, you need to press the Hold button before sharing the call wi th th e group.
Operational Features 5-46 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features Park/Pickup S t atic Configuration (480i/480i CT only) Y ou can configure a static configuration for parki ng and picking up a call using the Aastra W eb UI at Basic Settings-> Prefer ences .
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-47 Operational Featu res Operational Features Configuring Park /Pickup using S tatic Configuration (480i/480i CT only) Use the following procedure to configure the Park/ Pickup call feature using the static configuration method.
Operational Features 5-48 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features Park/Pickup Programmable Configuration The programmable meth od of configuratio n crea tes park and pickup softkeys or programmable keys that you can configure on the IP phones (480i/ 480i CT/91 1 2i/ 9133i).
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-49 Operational Featu res Operational Features • On the 480i CT , the customized labels apply to the base unit only . On the 480i CT handset, pressing Ï displays the default labels of " Park" and "Pickup".
Operational Features 5-50 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features Programmable Configuration Using Configura tion Files In the configuration files, you configure Park/Pickup using the softkey parameters.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-51 Operational Featu res Operational Features Model 9133i Exampl es Model 91 12i Examples Server Park Config uration Pickup C onfigur ation A.
Operational Features 5-52 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features Use the following procedure to configure the Park/ Pickup call feature using the programmable configuration meth od and the configuration files.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-53 Operational Featu res Operational Features Aastra Web UI For the 480i/480i CT : 1 Click on Operation->Softkeys and XML. 2 Pick a softkey to conf igure for Parking a call. 3 In the " Ty p e " field, select Park .
Operational Features 5-54 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features 1 1 In the " Va l u e " field, enter the approriate value ba sed on the server in your network. Note: For values to enter in this field, see the table “Park/Pickup Call Server Configuration V a lues” on page 5-46 .
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-55 Operational Featu res Operational Features 4 Pick another handset key to configure for picking up a call. 5 In the " Key Function " field, select Pickup . 6 Click to save yo ur changes.
Operational Features 5-56 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features 3 In the " Ty p e " field, select Park . 4 In the " Va l u e " field, enter the approri ate value ba sed on the server in your network.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-57 Operational Featu res Operational Features Using the Park Call/Pickup Parked Call Feature Use the following procedures on the IP phones to park a call and pick up a parked call. IP Phone UI Ste p Action Parking a Call 1 While on a li ve call, press the " Park " softkey .
Operational Features 5-58 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features Last Call Return (lcr) (Sylantro Servers only) Last call return (lcr) allows an administrator or user to configure a "last call return" function on a softkey or progr ammable key .
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-59 Operational Featu res Operational Features Aastra Web UI For the 480i/480i CT : 1 Click on Operation->Softkeys and XML. 2 Pick a softkey to config ure for Last Call Return. 3 In the " Ty p e " field, select lcr .
Operational Features 5-60 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features For the 480i CT Handset: 1 Click on Operation->Handset Keys . 2 Pick a handset key to configure for L ast Call Return. 3 In the " Key Function " field, select lcr .
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-61 Operational Featu res Operational Features For the 91 12i/9133i: 1 Click on Operation->Progra mmable Keys. 91 12i Scre en 9133i Screen 2 Pick a hard key to config ure for Last Call Return.
Operational Features 5-62 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features 6 Click on Operation->Reset . 7 In the " Rest art Phone " fie ld click to restart the IP phone and apply the changes.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-63 Operational Featu res Operational Features Call Forwarding The call forwardi ng feature on the IP phon e allows incoming calls to be forwarded to another destination. The phone sends the SIP message to the SIP proxy , whic h then forwards the call to the assigned destination.
Operational Features 5-64 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features The following table shows the IP phone m odel and the number of lines for which you can config ure call forwarding.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-65 Operational Featu res Operational Features Configuration Method for Call Forwarding The method y ou use to config ure call forwarding depends on t h e model phone you are configuring. Y ou can set the phone-wide call forward se ttings using the IP phone UI or the Aastra W eb UI.
Operational Features 5-66 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features 4 For 91 1 2i/9133i: In the “ Cfwd Mode ” field, enter the mode that you want to set on your phones. For 480i/480i CT : In the “ Mode ” field, enter the mode that yo u want to set on your phones.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-67 Operational Featu res Operational Features Aastra Web UI 1 Click on Basic Settings->Call Forward.
Operational Features 5-68 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features For global co nfiguration of call fo warding: 2 In the " Mode " field, select the mode you want to set on your phone.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-69 Operational Featu res Operational Features 8 In the " Fo rward Number " field, enter th e destination number fo r which you want your calls on this line to be call forw arded.
Operational Features 5-70 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features Callers List The IP phones have a "Callers List" f eature that store the name, phone number , and incremental calls, for each ca ll received by the phone.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-71 Operational Featu res Operational Features Enabling/Disabling Callers List Y ou can enable and disable user access to the Callers List on .
Operational Features 5-72 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features 4 T o delete all entries in the Callers list, press the 3 Delete softkey at the "Callers List" header . T o delete a line item from the Call ers List, select the line item you want to delete and press the 3 Delete softkey .
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-73 Operational Featu res Operational Features Downloading the Callers List Use the following procedure to download the Callers List using the Aast ra W eb UI. Aastra Web UI 1 Click on Operation->Directory .
Operational Features 5-74 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features Missed Calls Indicator The IP phone has a "missed calls" indicator that increments the number of missed calls to the phone. This feature is accessible from the IP phone UI only .
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-75 Operational Featu res Operational Features Accessing and Clearing Missed Ca lls Use the following procedure to access and clea r missed calls from the Callers List. Once you display the Callers List, the "<number> New Calls" indicator clears.
Operational Features 5-76 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features Directory List The IP phones have a " Dir ect ory List " feature that allows you to store fre quently used numbers on the phone.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-77 Operational Featu res Operational Features Y ou can use any spreadsheet applicatio n to open the file for viewing. The following is an example of a Director y List in a spreadsheet application.
Operational Features 5-78 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features Server to IP Phone Download Y ou can populate your IP phone Directory List with server directory files.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-79 Operational Featu res Operational Features Server to IP Phone Download Behav ior The software that reads directory files fro m the server , loads the file’ s contents into the phone's NVRAM when the phone is booting.
Operational Features 5-80 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features Using the Directory List Use the following procedures to access and use the Directory Lis t.. IP Phone UI Ste p Action For the 480i/480i CT : 1 Press x on the phone to display the Services menu.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-81 Operational Featu res Operational Features 1 1 T o exit the Directory List, press the Quit softkey .
Operational Features 5-82 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features Downloading from the Server to the IP Phone Y ou can use the configuration files to download the Directory List from the configuration serve r to the IP phone.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-83 Operational Featu res Operational Features Use the following procedure to configure the download. Aastra Web UI 1 Click on Operation->Directory . 2 In the Direct ory List field, click on .
Operational Features 5-84 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features V oicemail ( 480i/480i CT only) The V oicemail feature on the 480i/480i CT IP phones allow you to configure lines with phone numbers so the phone can dial out to connect to a voicemail server .
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-85 Operational Featu res Operational Features Y ou can enter up to 9 V oicemail numbers asso ciated with each of the 9 lines on the phone. For example: sip line1 vmail: *97 sip line2 vmail: *95 Use the following procedure to configure voicemail using the configuration files.
Operational Features 5-86 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features Using V oicemail (480i480i CT only) Use the following procedure to access and use voicemail. IP Phone UI Ste p Action For the 480i/480i CT : 1 Press x on the phone to display the Services menu.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-87 Operational Featu res Operational Features XML Customized Services Extensible Markup Languag e (XML) is a markup language much like HTML. HTML was designed to display data and to focus on how data looks.
Operational Features 5-88 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features Enabling/Disabling a Beep for S tatus Message Displays Y ou can enable or disable a BEEP option using the S tatus Message object (AastraIPPhoneStatus), the configura tion files, or the Aastra W eb UI.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-89 Operational Featu res Operational Features Scroll Delay Option for S tatus Messages The IP phones support a scroll delay o ption that allows you to set the time delay , in seconds, between the scrolling of each status message on the phone.
Operational Features 5-90 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features XML Push Requests In addition to initiating a request to an XML applicati on from the Services menu, an HTTP server can push an XM L object to the phone via HTTP P ost.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-91 Operational Featu res Operational Features Example XML Configuration The followi ng example shows th e parameters you enter in the configuration files to configure an XML application: xml application URI: http://172.
Operational Features 5-92 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features Aastra Web UI For the 480i/480i CT : 1 Click on Operation->Softkeys an d XML . 2 Select a key from keys 1 through 20. 3 In the " Ty p e " field, select XML from the list box.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-93 Operational Featu res Operational Features 8 Click to save your changes. The XML application is app lied to the IP phone immediately . When the XML appli cation is pushed to the phone vi a an HTTP POST , a host IP address or domain name server is required.
Operational Features 5-94 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features Aastra Web UI For the 91 12i/9133i 1 Click on Operation->Progra mmable Keys. 91 12i Screen . 9133i Screen 2 For the 91 12i, select a key from keys 1 through2.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-95 Operational Featu res Operational Features 3 In the " Ty p e " field, select XML from the list box. 4 In the " Va l u e " field, enter the IP address or qualif ied domain name of the XML application.
Operational Features 5-96 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features Using the XML Customized Service After you create, save, and configure the IP phone with an XML application, the customized service is ready for you to use.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-97 Operational Featu res Operational Features XML Action URIs The IP phones have a feature that allows an administrator to specify a uniform resource identifier (URI) that triggers a GET when certain events occur .
Operational Features 5-98 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Operational Features The following table identif ies the configurable actio n URI parameters in the configuration files and the Aastra W eb UI. This table also identifies the variables that apply to specific parameters.
Operational Features 41-001129-00 Rev 09, Rel ease 1.4.1 5-99 Operational Featu res Operational Features http://10.50.10.140/outgoing .pl?number=5551212 Y ou can configure this feature via the configuration files or the Aastra W eb UI.
Operational Features 5-100 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Operational Features Aastra Web UI 1 Click on Advanced Settings->Action URI. 2 Enter an XML URI for a startup event in the “ Start u p ” field. F or exampl e: http://10.
Operational Features 41-001129-00 Rev 09, Release 1.4.1 5-101 Operational Featu res Operational Features 4 Enter an XML URI for an incoming call event in the “ Inco ming Call ” field.
Operational Features 5-102 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Operational Features XML Softkey URI In addition to specifying variables fo r the Action URIs, you can also specify variables in the XML softkey URIs that are bound when the key is pressed.
Operational Features 41-001129-00 Rev 09, Release 1.4.1 5-103 Operational Featu res Operational Features Configuring XML Softkey URIs Use the following procedures to confi gure XML Softkey URIs using the configuration files or the Aastra W eb UI.
Operational Features 5-104 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Operational Features 3 In the " Ty p e " field, select XML from the list box. 4 In the " La bel " field, enter a label that displays on the IP phone for the XML softkey .
Operational Features 41-001129-00 Rev 09, Release 1.4.1 5-105 Operational Featu res Operational Features Aastra Web UI For the 91 12i/9133i: 1 Click on Operation->Progra mmable Keys.
Operational Features 5-106 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Operational Features 2 On the 91 12i, select a key from keys 1 through 2. On the 9133i, select a key from keys 1 through 7. 3 In the " Ty p e " field, select XML from the list box.
Operational Features 41-001129-00 Rev 09, Release 1.4.1 5-107 Operational Featu res Operational Features SIP Local Dial Plan A dial plan describ es the number and pattern of digits that a user dials to reach a particular tele phone number .
Operational Features 5-108 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Operational Features Dial Plan Example An example of a SIP Local Dial Plan is: [01]XXX|[2-8]XXXX|91XXXXXX XXXX|X+.
Operational Features 41-001129-00 Rev 09, Release 1.4.1 5-109 Operational Featu res Operational Features Example If you enter the following dial st ring for a local dial plan: sip dial plan: 1+#,9 whe.
Operational Features 5-110 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Operational Features Configuring the SIP Local Dial Plan Use the following procedures to confi gur e the SIP Local Dial Plan using the configuration files or the Aastra W eb UI.
Operational Features 41-001129-00 Rev 09, Release 1.4.1 5-111 Operational Featu res Operational Features 6 Click on Operation->Reset . 7 In the " Restart Phone " field click to restart the IP phone and apply the dial plan to the IP phone.
Operational Features 5-112 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Operational Features Incoming/Outgoing Intercom with Auto-Answer (Intercom applicable to 480i/480i CT only).
Operational Features 41-001129-00 Rev 09, Release 1.4.1 5-113 Operational Featu res Operational Features Configuring Intercom Calls and Auto-Answer Y ou can configure the Intercom feature an d auto-anaswer usin g the configuration files or the Aastra W eb UI.
Operational Features 5-114 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Operational Features 2 Select an Intercom type for outgoing Intercom calls from the Ty p e list box. V alid va lues are Phone-Side , Server-Side , Off . Default is Off .
Operational Features 41-001129-00 Rev 09, Release 1.4.1 5-115 Operational Featu res Operational Features 2T h e " Microphone Mute " field is ena bled by default. The microphone is muted on the IP phone for Intercom calls made by the origin ating caller .
Operational Features 5-116 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Operational Features Audio T ransmit and R eceive Gain Adjustment s The audio gain properties for the IP ph one handset, headset, and speakerphone is adjusted to reduce side-tone and echo on the local and far -end equipment.
Operational Features 41-001129-00 Rev 09, Release 1.4.1 5-117 Operational Featu res Operational Features Configuring Audio T ransmit and Receive Gain Adjustment s Y ou can configure the audio transmit and ga in adjustments using the configuration files only .
Operational Features 5-118 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Operational Features Ring T ones and T one Set s Y ou can configure ring tones and ri ng tone sets on the IP phones. Ring T ones There are several distinct ring tones a user or administrator ca n select from to set on the IP phones.
Operational Features 41-001129-00 Rev 09, Release 1.4.1 5-119 Operational Featu res Operational Features Aastra Web UI Global: T one 1 T one 2 T one 3 T one 4 T one 5 Silent Per-Line: Global T one 1 T.
Operational Features 5-120 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Operational Features Ring T one Set s In addition to ring tones, you can configure ring tone sets on a global-basis on the IP phones. Ring tone sets consist of to ne s customized for a specific country .
Operational Features 41-001129-00 Rev 09, Release 1.4.1 5-121 Operational Featu res Operational Features Configuring Ring T ones and T one Set s Use the following procedures to confi gure ring tones and to ne sets on the IP phones.
Operational Features 5-122 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Operational Features 5S e l e c t To n e S e t . 6 Select the country for which you want to apply the to ne set. V alid va lues are Australia , Europe, France , Germany , Italy , UK , and US .
Operational Features 41-001129-00 Rev 09, Release 1.4.1 5-123 Operational Featu res Operational Features For per-line co nfiguration: 4 In the " Ri ng T one " sectio n, select a line for which you want to set ring tone. 5 Select a value from the " LineN " field .
Operational Features 5-124 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Operational Features Priority Alerting Priority alerting on the IP p hones is a feature that allows incoming calls to trigger pre-defined ringing or call waiting alert tones.
Operational Features 41-001129-00 Rev 09, Release 1.4.1 5-125 Operational Featu res Operational Features Sylantro Servers The ring tone keywords that can display in the "Alert-Info" header f.
Operational Features 5-126 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Operational Features If you enable priority aler ting when using a Sylantro server , you can specify the Be.
Operational Features 41-001129-00 Rev 09, Release 1.4.1 5-127 Operational Featu res Operational Features The following table identif ies the dif ferent Bellcore ring tone patterns and cadences.
Operational Features 5-128 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Operational Features Call W aiting T ones Call W aiting is a feature that tells you if a new caller is trying to contact you when you are already on the phone.
Operational Features 41-001129-00 Rev 09, Release 1.4.1 5-129 Operational Featu res Operational Features Configuring Priority Alerting Use the following procedures to confi gur e priority alerting on the IP phones.
Operational Features 5-130 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Operational Features 3 Select a ring tone pattern for each of the following fields: •G r o u p • Intern.
Operational Features 41-001129-00 Rev 09, Release 1.4.1 5-131 Operational Featu res Operational Features S tuttered Dial T one Y ou can enable or disable the playing of a stuttered dial tone when there is a message waiting on the IP phone. Y ou can configure this feature using the configuration files and the Aastra W eb UI.
Operational Features 5-132 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Operational Features 3 Click to save your changes. Y ou must restart your IP phone for the changes to take affect. 4 Click on Operation->Reset . 5 In the " Rest art Phone " fie ld click to restart the IP phone.
Operational Features 41-001129-00 Rev 09, Release 1.4.1 5-133 Operational Featu res Operational Features Call W aiting T one Y ou can enable or disable the playing of a call waiting tone when a caller is on an active call and a new call comes into the phone.
Operational Features 5-134 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Operational Features 3 Click to save your changes. Y ou must restart your IP phone for the changes to take affect. 4 Click on Operation->Reset . 5 In the " Rest art Phone " fie ld click to restart the IP phone.
Operational Features 41-001129-00 Rev 09, Release 1.4.1 5-135 Operational Featu res Operational Features Language Using the IP phone UI or th e co nfiguration files, you can set the phones to use a specific language to display in the IP Phone UI.
Operational Features 5-136 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Operational Features IP Phone UI Ste p Action 1 For 91 1 2i/9133i: Press I on the phone to enter the Options List. For 480i/480i CT : Press % on the phone to enter the Opti ons List.
41-001129-00 Rev 09 , Release 1.4.1 6-1 Advanced Operational Features Chapter 6 Advanced Operational Features About this chapter Introduction The IP phones have advanced operational features you can configure using the configuration files and/or the Aastra W e b UI.
Advanced Operational Features 6-2 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Advanced Operational Features Advanced Operational Features This section provides the following info.
Advanced Operational Features 41-001129-00 Rev 09, Release 1.4.1 6-3 Advanced O perational Feat ures Advanced Operational Features MAC Address/Line Nu mber in REGISTER Messages The IP phones can send .
Advanced Operational Features 6-4 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Advanced Operational Features . Aastra Web UI Ste p Action 1 Click on Advanced Settings->G lobal SI P->Advanced SIP Setting. 2 Enable the " Send MAC Address in REGISTER Message " field by checking the check box.
Advanced Operational Features 41-001129-00 Rev 09, Release 1.4.1 6-5 Advanced O perational Feat ures Advanced Operational Features SIP Message Sequence for Blind T ransfer The SIP message sequence for Blind T ra nsfer avoids the transfer target having two simultaneous calls.
Advanced Operational Features 6-6 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Advanced Operational Features Up date Caller ID During a Call It is possible for a proxy or call ser.
Advanced Operational Features 41-001129-00 Rev 09, Release 1.4.1 6-7 Advanced O perational Feat ures Advanced Operational Features Boot Sequence R ecovery Mode Y ou can force the IP phone into recovery mode by pressing the 1 and # keys during boot up when the logo displays.
Advanced Operational Features 6-8 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Advanced Operational Features Auto-discovery Using mDNS The IP phones can perform an auto-discovery o f all servers on a network using mDNS. When the IP phone discovers a TFTP server , it is automatically configured by that TFTP server .
Advanced Operational Features 41-001129-00 Rev 09, Release 1.4.1 6-9 Advanced O perational Feat ures Advanced Operational Features Single Call Restriction (480i CT only) On the 480i CT , an administrator can enab le or disable a single call restriction between the 480i CT base unit and a call server .
Advanced Operational Features 6-10 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide Advanced Operational Features Aastra Web UI Ste p Action 1 Click on Advanced Settings ->Globa l SIP->RTP Settings. 2 Enable the " T wo Call Support " field by checking the check box.
41-001129-00 Rev 09 , Release 1.4.1 7-1 Encryption and the IP Phone Chapter 7 Encryption and the IP Phone About this chapter Introduction This chapter provides info rmation about encryption on the IP phones and provides methods an administrator can use to store encryped files to a server .
Encryption and the IP Phone 7-2 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Encryption and the IP Phone Encryption and the IP Phone An encryption feature for the IP phone a llows.
Encryption and the IP Phone 41-001129-00 Rev 09, Release 1.4.1 7-3 Encryption and the IP Phone Encryption and the IP Phone T o make changes to the configuration files, the System Administrator must decrypt the files, make the changes, and re-encrypt the files.
Encryption and the IP Phone 7-4 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Encryption and the IP Phone Examples The following examples illustrate the use of the anacrypt.exe file. Example 1 Encrypt aastra.cfg into aastra .tuz using password 1234abcd: C:> anacrypt aastra.
Encryption and the IP Phone 41-001129-00 Rev 09, Release 1.4.1 7-5 Encryption and the IP Phone Encryption and the IP Phone Example 7 Use the "-v" variable to display version number . C:> anacrypt -v The encr yption tag format sup ported by this anacr ypt is: T uzo v1.
.
41-001129-00 Rev 09 , Release 1.4.1 8-1 Firmware Upgrade Chapter 8 Firmware Upgrade About this chapter Introduction This chapter provides information abou t upgrading the IP phone firmware.
Upgrading the Firmware 8-2 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Firmware Upgrade Upgrading the Firmware The IP phone uses a TFTP , FTP , or H TTP server (dependi ng on the protocol configured on the IP phone) to down load configuration files and firmware.
Upgrading the Firmware 41-001129-00 Rev 09, Release 1.4.1 8-3 Firmware Upgrad e Firmware Upgrade Aastra Web UI Ste p Action 1 Click on Advanced Settings->Firm ware Up date. 2 Enter the TFTP serve r IP address or qua lified domain name in the " TFTP Server IP " field .
Upgrading the Firmware 8-4 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Firmware Upgrade Manual Firmware and Configuration File Up date Restarting the phone forces the phon e to check for both firmware and configuration files stored on the configuration server .
Upgrading the Firmware 41-001129-00 Rev 09, Release 1.4.1 8-5 Firmware Upgrad e Firmware Upgrade Aastra Web UI Ste p Action 1 Click on Operation->Reset. 2 Click . 3 Click OK at the confirmation prompt. The firmware and configuration file s do wnload fro m the configuration server .
Upgrading the Firmware 8-6 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Firmware Upgrade Automatic Up date (auto-resync) The auto-resync feature on the IP phones a llows an administrator to enable the phone to be updated au tomatically once a day at a specific time in a 24-hour period if the files on the server have ch anged.
Upgrading the Firmware 41-001129-00 Rev 09, Release 1.4.1 8-7 Firmware Upgrad e Firmware Upgrade Configuring Automatic Up date Use the following procedures to confi gure automatic update of the IP phone firmware, configuration files, or both. Notes: 1.
Upgrading the Firmware 8-8 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Firmware Upgrade Aastra Web UI Ste p Action 1 Click on Advanced Settings->Co nfigura tion Server->Auto-Resync. 2 Select the auto-resync mode from the Mode field.
Upgrading the Firmware 41-001129-00 Rev 09, Release 1.4.1 8-9 Firmware Upgrad e Firmware Upgrade Reference For more information about setting automatic update on the IP phone, see the "auto resync mode" and "auto resync tim e" parameters, see Appendix A, the section, “Configuration Server Settings” on page A-10 .
.
41-001129-00 Rev 09 , Release 1.4.1 9-1 T roubleshooting Chapter 9 T roubleshooting About this chapter Introduction This chapter describes tasks that a system administrator can perform on the IP phones for troublesho oting purposes. It a lso includes answers to qu estions you may have while u sing the IP phones.
Troubleshooting 9-2 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide T roubleshooting T roubleshooting This section describes tasks that a system administrator can perform on the IP phones for troublesho oting purposes.
Troubleshooting 41-001129-00 Rev 09, Release 1.4.1 9-3 T roub leshooting T roubleshooting In the Aa stra W eb UI , you can configure the log settings at Advanced Settings->T r oubleshooting->Log Settings.
Troubleshooting 9-4 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide T roubleshooting Performing T r oubleshooting T asks Use the following procedure to p erform troubleshooting o n the IP phone via the configuration files.
Troubleshooting 41-001129-00 Rev 09, Release 1.4.1 9-5 T roub leshooting T roubleshooting Reference For information that describ es solutions to most common problems using the IP phones, see the next section, “T roubleshooting Solutions” on page 9-6.
Troubleshooting Solutions 9-6 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide T roubleshooting T roubleshooting Solutions Description This section describes solutio ns to some most common problems that can occur while using the IP phones.
Troubleshooting Solutions 41-001129-00 Rev 09, Release 1.4.1 9-7 T roub leshooting T roubleshooting Please ensure that the TFTP server is ru nning and accessible on the network. If the firmware file is correctly located on the running TFTP server , the phone will locate the file and reload the applicatio n onto the phone.
Troubleshooting Solutions 9-8 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide T roubleshooting Reason : Neither of the <mac>.tuz and aastra.tuz files are present on the configuration server (TFTP/FTP/HTTP). Fix : Create the encrypted files using anac rypt.
Troubleshooting Solutions 41-001129-00 Rev 09, Release 1.4.1 9-9 T roub leshooting T roubleshooting How do I rest art the IP phone? IP Phone UI Ste p Action 1 For 91 1 2i/9133i: Press I on the phone to enter the Options List. For 480i/480i CT : Press % on the phone to enter the Opti ons List.
Troubleshooting Solutions 9-10 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide T roubleshooting 2 Click .. 3 Click OK at the confirmation prompt.
Troubleshooting Solutions 41-001129-00 Rev 09, Rel ease 1.4.1 9-11 T roub leshooting T roubleshooting How do I set the IP phone to factory default? IP Phone UI Ste p Action 1 For 91 1 2i/9133i: Press I on the phone to enter the Options List. For 480i/480i CT : Press % on the phone to enter the Opti ons List.
Troubleshooting Solutions 9-12 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide T roubleshooting 9 For 91 1 2i/9133i: Press #=Conf irm . For 480i/480i CT : Press Default . Note: Press Cancel to cancel the opera iton. 10 Press Restart when the phone prompts you to rest art th e phone.
Troubleshooting Solutions 41-001129-00 Rev 09, Rel ease 1.4.1 9-13 T roub leshooting T roubleshooting T o restore the local configuration file factory defa ults only: 4 In the " Remove Local Configuration Settings " field, click . This restores all factory defaults to the local configuration file .
Troubleshooting Solutions 9-14 41-001129-00 Re v 09, Release 1.4 .1 IP Phone Administra tor Guide T roubleshooting How to reset a user ’s p assword? IP Phone UI Ste p Action 1 For 91 1 2i/9133i: Press I on the phone to enter the Options List. For 480i/480i CT : Press % on the phone to enter the Opti ons List.
Troubleshooting Solutions 41-001129-00 Rev 09, Rel ease 1.4.1 9-15 T roub leshooting T roubleshooting 3 In the " New Password " field, enter the new user password. 4 In the " Co nfirm Password " field, enter the new user password again.
.
About this appendix 41-001129-00 Rev 09, Release 1.4.1 A-1 Configuration Parame ters Appendix A Appendix A Configuration Parameters About this appendix Introduction This appendix describes the parameters yo u can set in the conf iguration files for the IP phones.
About this appendix A-2 41-001129-00 Rev 09, Release 1.4.1 IP Phone Administra tor Guide Appendix A SIP Basic, Global Settings page A-35 SIP Basic, Per-Line Settings page A-43 Advanced SIP Settings pa.
About this appendix 41-001129-00 Rev 09, Release 1.4.1 A-3 Configuration Parame ters Appendix A Update Caller ID Settin g. p age A-105 Boot Sequence Recovery Mode.
Setting Parameters in Configuration Files A-4 41-001129-00 Rev 09, Release 1.4.1 IP Phone Administra tor Guide Appendix A Setting Parameters in Configuration Files Y ou can set specific configuration parameters in the configuration files for configuring yo u IP phone.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Release 1.4.1 A-5 Configuration Parame ters Appendix A Operational, Basic, and Advanced Parameters The following sections provide the config uration parameters you can configure o n the IP phone .
Operational, Basic, and Advanced Parameters A-6 41-001129-00 Rev 09, Release 1.4.1 IP Phone Administra tor Guide Appendix A Parameter – subnet mask Subnet Mask (in Web UI) IP phone UI Options->Network Settings Aastra Web UI Advanced Settings->Network Configuration Files aastra.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Release 1.4.1 A-7 Configuration Parame ters Appendix A Parameter – default gateway Gateway (in Web UI) IP phone UI Options->Network Settings Aastra Web UI Advanced Settings->Network Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters A-8 41-001129-00 Rev 09, Release 1.4.1 IP Phone Administra tor Guide Appendix A Password Settings Parameter – admin password Configurati on Files aa stra.cfg , <mac>.cfg Description Allows you to set a new admi nistrator password for the IP phone.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Release 1.4.1 A-9 Configuration Parame ters Appendix A Parameter – options password enabled Configuratio n Files aastra.cfg, <mac>.cfg Description Enables or disables password protection of the Options key on the IP phone.
Operational, Basic, and Advanced Parameters A-10 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Aastra Web UI Settings Configuration Server Settings Parameter – web interface enabled Configuration Files aastr a.cfg, <mac>.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-11 Configuration Parame ters Appendix A Parameter – tftp server TFTP Server (in Web UI) IP phone UI Options->Network->T FTP Server-> Primary TFTP Aastra Web UI Advanced Settings->Configura tion Server Configuration Files aastra.
Operational, Basic, and Advanced Parameters A-12 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Parameter – use alternative tftp serve r Use Alternate TFTP (in Web UI) .
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-13 Configuration Parame ters Appendix A Parameter – ftp username FTP User Na me (in Web UI) IP phone UI Options->Network->FTP Server Aastra Web UI Ad vanced Settings->Configuration Server Configur ation Files aastra.
Operational, Basic, and Advanced Parameters A-14 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Parameter – http path HTTP Path (in Web UI) IP phone UI Options->Network->HTTP Server Aastra Web UI Advanced Settings->Configura tion Server Configuratio n Files aa stra.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-15 Configuration Parame ters Appendix A Parameter – auto resync mode Mode (in Web UI) Aastra Web UI Advanced Settings->Config uration Server-> Auto-Resync Configuration Files aastra.
Operational, Basic, and Advanced Parameters A-16 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Parameter – auto resync time T ime (24-hour) (in Web UI) Aastra Web UI Advanced Settings->Config uration Server-> Auto-Resync Configuration Files aastra.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-17 Configuration Parame ters Appendix A T ype of Service (T oS)/DSCP Settings Parameter – tos sip IP phone UI Options->Network->T yp e of Service->SIP Aastra Web UI Advanced Settings->Network-> T ype of Service,DSCP Config uration Fil es aast ra.
Operational, Basic, and Advanced Parameters A-18 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A V irtual Local Area Network (VLAN) Settings Parameter – tagging enabled .
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-19 Configuration Parame ters Appendix A The following table identif ies the d efault DSCP-to-priority mapping structure.
Operational, Basic, and Advanced Parameters A-20 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Parameter – priority non-ip Priority , Non-IP Packet (in Web UI) IP phon.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-21 Configuration Parame ters Appendix A Network Address T ranslation (NA T) Settings Parameter – sip nat ip NA T IP (in Web UI) IP phone UI Opti ons->SIP Settings Aastra Web UI Advanced Settings->Network Configuration Files aast ra.
Operational, Basic, and Advanced Parameters A-22 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Parameter – sip nortel nat timer Nortel NA T Timer (in Web UI) Aastra Web UI Advanc ed Settings->Network Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-23 Configuration Parame ters Appendix A T ime Server Settings Parameter – time serve r disabled NTP Time Servers (in Web UI) Aastra Web UI Advanced Settings->Network-> Advanced Network Settings Configuratio n Files aastra.
Operational, Basic, and Advanced Parameters A-24 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Parameter – time s erver 2 Time Server 2 (in Web UI) Aastra Web UI Advanced Settings->Network-> Advanced Network Setting s Configuration Files aastra.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-25 Configuration Parame ters Appendix A T ime and Date Settings Parameter – time format Time Format (in Phone UI) I P phone UI Options->Time and Date->T ime F ormat Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters A-26 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Parameter – dst config Daylight Savings (in Phone UI) IP phone UI Opti ons->T ime a nd Date->Daylight Savings Configur ation Files aa stra.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-27 Configuration Parame ters Appendix A T ime Zone Name/T ime Zone Code T able Ti me Zone Name Time Z one Code AD-Ando.
Operational, Basic, and Advanced Parameters A-28 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A CA-Newfoundland CA-Atlantic CA-Eastern CA-Saskatchewan CA-Central CA-Mount.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-29 Configuration Parame ters Appendix A HK-Hong Kong HN-T egucigalpa HR-Zagreb HT -Port-au-Prince HU-Budapest HKS CST .
Operational, Basic, and Advanced Parameters A-30 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A P A-Pa nama PE-Lima PL-W arsaw PR-Puerto Rico PT -Lisbon PT -Madeira PT -A.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-31 Configuration Parame ters Appendix A V A-V atican CE T YU-Belgrade CET Ti me Zone Name Time Z one Code.
Operational, Basic, and Advanced Parameters A-32 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A SIP Local Dial Plan Settings ) Parameter – displayName1 Idle Display Name 1 (in Web UI) Aastra Web UI Basic Settings->Preferences Configura tion Fil es aast ra.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-33 Configuration Parame ters Appendix A Parameter – sip dial plan Local Dial Plan (in Web UI) Aastra Web UI Basic Settings->Preferences Configuration Files aa stra.
Operational, Basic, and Advanced Parameters A-34 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Parameter – sip dial plan terminator Send Dial Plan T erminator (in Web UI) Aastra Web UI Basic Settings->Preferences Configura tion Fil es aast ra.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-35 Configuration Parame ters Appendix A SIP Basic, Global Settings SIP Global Authentication Settings Parameter – si.
Operational, Basic, and Advanced Parameters A-36 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Parameter – sip display name Caller ID (in Web UI) IP Phone UI Options->SIP Settings Aastra Web UI Advanced Settings->Glo bal SIP-> Basic SIP Settings Configuration Fil es aastra.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-37 Configuration Parame ters Appendix A Parameter – sip bla number BLA Number (in Web UI) Aastra Web UI Advanced Settings->Gl obal SIP-> Basic SIP Settings Config uration Fil es aastra.
Operational, Basic, and Advanced Parameters A-38 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A SIP Global Network Settings. Parameter – sip proxy ip Proxy Server (in Web UI) IP Phone UI Options->SIP Settings Aastra Web UI Advanced Settings->Glob al SIP-> Basic SIP Settings Configuratio n Files aastra.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-39 Configuration Parame ters Appendix A Parameter – sip backup proxy ip Backup Proxy Server (in Web UI) Aastra Web UI Advanced Settings->Global SIP-> Basic SIP Network Settings Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters A-40 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Parameter – sip outbound proxy port outbound proxy port (in Web UI) Aastra Web UI Advanced Settings->Global SIP-> Advanced SIP Settings Configuration Fil es aastra.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-41 Configuration Parame ters Appendix A Parameter – sip registrar port Registrar Port (in Web UI) IP Phone UI Options->SIP Se ttings Aastra Web UI Advanced Set tings ->Global SIP-> Basic SIP Settings Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters A-42 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Parameter – sip backup registrar port Backup Registrar Port (in Web UI) Aastra Web UI Advanced Settings->Global SIP-> Basic SIP Network Settings Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-43 Configuration Parame ters Appendix A SIP Basic, Per-Line Settings The following parameters are SIP per-line settings. The value of " N " is 1 - 9 for 480i, 480i CT , and 9133i.
Operational, Basic, and Advanced Parameters A-44 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Parameter – sip lineN display name Caller ID (in Web UI) Aastra Web UI Advanced Settings-> Line 1 thru 9 (480i/480i CT/9133i) Aastra Web UI Advanced Settings->Glo bal SIP (91 12i) Configuration Fil es aastra.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-45 Configuration Parame ters Appendix A Parameter – sip lineN password Password (in Web UI) Aastra Web UI Advanced Settings->Line 1 thru 9 (480i/480i CT/9133i) Aastra Web UI Advanced Settings->Global SIP (91 12i) Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters A-46 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Parameter – sip lineN bla number BLA Number (in Web UI) Aastra Web UI Advanced Settings->Line 1 thru 9 (480i/480i CT/9133i) Aastra Web UI Advanced Settings->Global SIP (91 12i) Configuration Fil es aa stra.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-47 Configuration Parame ters Appendix A Parameter – sip lineN mode Line Mode (in Web UI) Aastra Web UI Advanced Settings->Line 1 thru 9 (480i/480i CT/9133i) Aastra Web UI Advanced Settings->Global SIP (91 12i) Configur ation Files aastra.
Operational, Basic, and Advanced Parameters A-48 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A SIP Per-Line Network Settings.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-49 Configuration Parame ters Appendix A Parameter – sip linex backup proxy ip Backup Proxy Server (in Web UI) Aastra.
Operational, Basic, and Advanced Parameters A-50 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Parameter – sip lineN outbound proxy port Outbound Proxy Port (in Web UI.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-51 Configuration Parame ters Appendix A Parameter – sip lineN registrar port Registrar Port (in Web UI) Aastra Web UI Advanced Settings->Line 1 thru 9 (480i/480i CT/9133i) Aastra Web UI Advanced Setti ngs->Global SIP (91 12i) Configuration Fil es aastra.
Operational, Basic, and Advanced Parameters A-52 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Parameter – sip linex backup registrar po rt Backup Registrar Port (in Web UI) Aastra Web UI Advanced Settings->Line N -> Basic SIP Network Settings Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-53 Configuration Parame ters Appendix A Advanced SIP Settings Parameter – sip explicit mwi subscription Explicit MWI Subscription (in Web UI) Aastra Web UI Advanced Settings->Global SIP-> Advanced SIP Settings Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters A-54 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Parameter – sip session timer Session Timer (in Web UI) Aastra Web UI Advanced Settings->Gl obal SIP-> Advanced SIP Settings Configuration Fil es aastra.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-55 Configuration Parame ters Appendix A Parameter – sip T2 timer T2 Timer (in Web UI) Aastra Web UI Advanced Settings->Global SIP-> Advanced SIP Settings Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters A-56 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Parameter – sip transport protocol T ransport Protocol (in Web UI) Aastra Web UI Advanced Settings ->Global SIP-> Advanced SIP Settings Configurati on Files aastra.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-57 Configuration Parame ters Appendix A Parameter – sip registration timeout retry timer Registration Timeout Retry Time r (in Web UI) Aastra Web UI Advanced Settings->Global SIP-> Advanced SIP Settings Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters A-58 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A RTP , Codec, DTMF Global Settings Parameter – sip rtp po rt RTP Por t Ba.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-59 Configuration Parame ters Appendix A Parameter – sip out-of-band dtmf Force RFC28 33 Out-of-Band DTMF (in Web UI) Aastra Web UI Advanced Settings->Glob al SIP->RTP Settings Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters A-60 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A DTMF Per-Line Settings Parameter – sip dtmf method DTMF Method (in Web UI) Aastra Web UI Advanced Settings->Glo bal SIP->RTP Settings Configur ation Files aastra.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-61 Configuration Parame ters Appendix A Silence Suppression Settings Parameter – sip silence suppression Silence Suppression (in Web UI) Aastra Web UI Advanced Settings->Global SIP->RTP Settings Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters A-62 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A V oicemail Settin gs Parameter – sip lineN vmail Note: The value of " N " is 1 - 9 for 480i, 480 i CT , and 9 133i.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-63 Configuration Parame ters Appendix A Directory Settings Parameter – directory 1 Directory List (in Web UI) Aastra Web UI Operation->Directory Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters A-64 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Callers List Settings Call Forward Settings Parameter – callers list disabled Config uration Fil es aast ra.cfg, <mac> .
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-65 Configuration Parame ters Appendix A Missed Calls Indicator Settings Parameter – missed calls indicator disabled Configuration Fil es aastra.cfg, <mac>.cfg Description Enables or disables the Mi ssed Calls Indicator .
Operational, Basic, and Advanced Parameters A-66 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A XML Settings Parameter – xml application URI XML Application URI (in Web UI) Aastra Web UI Operation->Softkeys and XML->Services Configura tion Fil es aa stra.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-67 Configuration Parame ters Appendix A Parameter – xml application post list XML Push Server List (in Web UI) Aastra Web UI Advanced Settings->Configura tion Server Configuration Files aa stra.
Operational, Basic, and Advanced Parameters A-68 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Parameter – xml status scroll delay S tatus Scroll D elay (seconds) (in Web UI) Aastra Web UI Basic Settings->Preferences Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-69 Configuration Parame ters Appendix A Action URI Settings Parameter – action uri startup Sta rt u p (in Web UI) Aastra Web UI Advanced Settings->Action URI Configura tion Fil es aastra.
Operational, Basic, and Advanced Parameters A-70 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Parameter – action uri incoming Incoming Call (in Web UI) Aastra Web UI Advanced Settings->Action URI Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-71 Configuration Parame ters Appendix A Parameter – action uri offhook Offhook (in Web UI) Aastra Web UI Advanced Settings->Action URI Configuration Fi les aastra.cfg , <mac>.
Operational, Basic, and Advanced Parameters A-72 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Ring T one and T one Set Global Settings Parameter – ring tone Global Ri.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-73 Configuration Parame ters Appendix A Ring T one Per-Line Settings Parameter – lineN ring tone Line N (in Web UI) Aastra Web UI: Basic Settings->Preference s->Ring T ones Configuration Files aastra.
Operational, Basic, and Advanced Parameters A-74 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A S tuttered Dial T one Setting Call W aiting T one Set ting Parameter – stutter disabled S tuttered Dial T one (in Web UI) Aastra Web UI: Basic Settings->Pr eferences->General Configuration Fi les aa stra.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-75 Configuration Parame ters Appendix A Priority Alert Settings For Sylantro Server only Parameter – prioity alertin.
Operational, Basic, and Advanced Parameters A-76 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Parameter – alert community 1 community-1 (in Web UI) Aastra Web UI: Basic Setting s->Preferences-> Priority Alerting Settings Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-77 Configuration Parame ters Appendix A Parameter – alert community 3 community-3 (in Web UI) Aastra Web UI: Basic Setting s->Preferences-> Priority Alerting Settings Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters A-78 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Parameter – alert external alert external (in Web UI) Aastra Web UI: Basic Settings->Preferences-> Priority Alerting Setti ngs Configuration Fil es aastra.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-79 Configuration Parame ters Appendix A Parameter – alert group alert group (in Web UI) Aastra Web UI: Basic Setting s->Preferences-> Priority Alerting Settings Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters A-80 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Language Settings Parameter – alert priority alert priority (in Web UI) Aastra Web UI: Basic Settings-> Preferences-> Priority Alerting Settings Configuration Files aastra.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-81 Configuration Parame ters Appendix A Suppress DTMF Playback Settings Parameter – suppress dtmf playback Suppress DTMF Playba ck (in Web UI) Aastra Web UI Basic Settings->Preference s Configuration Fi les aastr a.
Operational, Basic, and Advanced Parameters A-82 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Intercom and Auto -Answer Settings Outgoing Intercom Settings (480i/480i C.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-83 Configuration Parame ters Appendix A Parameter – sip intercom prefix code Prefix Code (in Web UI) Aastra Web UI Basic Settings->Preferences-> Outgoing Intercom Settin gs Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters A-84 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Incoming Intercom Settings Parameter – sip intercom mute mic Microphone Mute (in Web UI) Aastra Web UI Basic Setting s->Preferences-> Incoming Inte rcom Settings Configura tion Fil es aastra.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-85 Configuration Parame ters Appendix A Audio T ransmit and Receive Gain Adjustment Settings Parameter – headset tx gain Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters A-86 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Parameter – handset tx gain Configuration Fil es aastra.cfg, <mac>.cfg Description This is the increased (+db) or decreased (-db) amount of signal transmitted from the handset microphone to the far-end party .
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-87 Configuration Parame ters Appendix A Parameter – handsfree tx gain Config uration Fil es aastra.cfg, <mac>.cfg Description This is the increase d (+db) or decreased (-db) amount of signa l transmitted from the base microphone to the far-end party .
Operational, Basic, and Advanced Parameters A-88 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Directed Call Pickup (BLF Call Interception) Settings Parameter – direct.
Operational, Basic, and Advanced Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-89 Configuration Parame ters Appendix A BLF Subscription Period Settings Parameter – sip blf subscription period BLF Subscription Period (in Web UI) Aastra Web UI Advanced Settings->Global SIP ->Advanced SIP Settings Configura tion Fil es aa stra.
Hard Key Parameters A-90 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Hard Key Parameters This section provides the hard key settings you can use to enable and disable the Redial, Conf, an d Xfer keys on th e IP phone. Parameter – redial disabled Configuration Fi les aastra.
Hard Key Parameters 41-001129-00 Rev 09, Rel ease 1.4.1 A-91 Configuration Parame ters Appendix A Parameter – call transfer disabled Config uration Fil es aastra.cfg, <mac>.cfg Description Enables or disable s the Xfer key on the IP phone. If this parameter is set to 0, the key is active and can be pressed by the user .
Hard Key Parameters A-92 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Parameter – map conf key to Map Conf Key T o (in Web UI) Aastra Web UI Basic Setting s->Preferences->Key Mapping Configuration Fil es aastra.
Softkey/Programmable Key Parameter s 41-001129-00 Rev 09, Rel ease 1.4.1 A-93 Configuration Parame ters Appendix A Softkey/Programmable Key Parameters This section provides the softkey and programmable key parameters you ca n configure on the IP phones.
Softkey/Programmable Key Parameter s A-94 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Softkey Settings for 480i and 480i CT The value of " N " for the following parameters is depen dent on the number of softkeys availa ble on the 48 0i/480i CT mo dels.
Softkey/Programmable Key Parameter s 41-001129-00 Rev 09, Rel ease 1.4.1 A-95 Configuration Parame ters Appendix A Default V alue none Range line speeddial dnd blf list ("BLFList" in the Aas.
Softkey/Programmable Key Parameter s A-96 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Parameter – softkeyN label Label (in Web UI) Aastra Web UI Operation- >Softkeys and XML Configuration Files aastra. cfg, <mac>.
Softkey/Programmable Key Parameter s 41-001129-00 Rev 09, Rel ease 1.4.1 A-97 Configuration Parame ters Appendix A Parameter – softkeyN value Va l u e (In WEb UI) Aastra Web UI Operation->Softkeys and XML Configuratio n Files aa stra.cfg, <ma c>.
Softkey/Programmable Key Parameter s A-98 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Parameter – softkeyN line Line (in Web UI) Aastra Web UI Operation- >Softkeys and XML Configuration Fil es aast ra.cfg, <ma c>.
Softkey/Programmable Key Parameter s 41-001129-00 Rev 09, Rel ease 1.4.1 A-99 Configuration Parame ters Appendix A Parameter – softkeyN states Idle, Connected, Incoming, Outgoing (in Web UI) Aastra Web UI Operation- >Softkeys and XML Configuration Fil es aast ra.
Softkey/Programmable Key Parameter s A-100 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Programmable Key Settin gs for 91 12i and 9133i The value of " N " fo r the following parameters i s dependen t on the number of programmable keys available on the 9112i/9133i models.
Softkey/Programmable Key Parameter s 41-001129-00 Rev 09, Release 1.4.1 A-10 1 Configuration Parame ters Appendix A Range line (9133i on ly) speeddial dnd ("do not disturb" in the Aastra Web.
Softkey/Programmable Key Parameter s A-102 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Parameter (9133i only) – prgkeyN line Line (in Web UI) Aastra Web UI Operation->Programmable Keys Configuration Files aastra.cfg, <mac>.
Advanced Operational Paramete rs 41-001129-00 Rev 09, Release 1.4.1 A-10 3 Configuration Parame ters Appendix A Advanced Operational Parameters The following parameters in this section allow the system admininstrator to set advanced operatio nal features on the IP phon es.
Blind T ransfer Setting. Parameter – sip send line Send Line Numbe r in REGISTER Message (in Web UI) Aastra Web UI: Advanced Settings->Global SIP-> Advanced SIP Settings Config uration Fil es aastra.
Advanced Operational Paramete rs 41-001129-00 Rev 09, Release 1.4.1 A-10 5 Configuration Parame ters Appendix A Up date Caller ID Setting. Boot Sequence R ecovery Mode. Parameter – sip update callerid Configurati on Files aastra. cfg, <mac>. cfg Description Enables or d isables the updating of the Caller ID information during a call.
Advanced Operational Paramete rs A-106 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Single Call Restriction Parameter – two call support T wo Ca ll Support (in Web UI) Aastra Web UI Advanced Setting s->Global SIP->RTP Settings Configuration Fi les aastra.
Troubleshooting Parameters 41-001129-00 Rev 09, Release 1.4.1 A-10 7 Configuration Parame ters Appendix A T roubleshooting Parameters The following parameters in this section allow the system admininstrator to set logging and support settings for troubleshooting purposes.
Troubleshooting Parameters A-108 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Parameter – log level Log Level (in Web UI) Aastra Web UI Advanced Settings->Troubleshooting Configuration Files aastra.cfg, <ma c>.
Troubleshooting Parameters 41-001129-00 Rev 09, Release 1.4.1 A-10 9 Configuration Parame ters Appendix A.
Troubleshooting Parameters A-110 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A Ti me Zone Name Time Z one Code AD-Andorra AG-Antigua AI-Anguilla AL-T irane AN-Curacao AR.
Troubleshooting Parameters 41-001129-00 Rev 09, Release 1.4.1 A-11 1 Configuration Parame ters Appendix A CA-Newfoundland CA-Atlantic CA-Eastern CA-Saskatchewan CA-Central CA-Mountain CA-Pacific CA-Y .
Troubleshooting Parameters A-112 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A HK-Hong Kong HN-T egucigalpa HR-Zagreb HT -Port-au-Prince HU-Budapest HKS CST CET EST CET .
Troubleshooting Parameters 41-001129-00 Rev 09, Release 1.4.1 A-11 3 Configuration Parame ters Appendix A P A-Pa nama PE-Lima PL-W arsaw PR-Puerto Rico PT -Lisbon PT -Madeira PT -Azores PY -Asuncion E.
Troubleshooting Parameters A-114 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix A V A-V atican CE T YU-Belgrade CET Ti me Zone Name Time Z one Code.
41-001129-00 Rev 09 , Release 1.4.1 B-1 Appendix B Appendix B Configuration Server Setup About this appendix Introduction This appendix describes how to setup th e T FTP protocol configuration server in your network.
Configuration Server Pr otocol Setup B-2 41-001129-00 Rev 09, Release 1.4.1 IP Phone Administra tor Guide Appendix B Configuration Server Protocol Setup TFTP Server Set-up There are a number of TFTP servers av ailable. PumpKIN is one of such TFTP servers.
Configuration Server Pr otocol Setup 41-001129-00 Rev 09, Release 1.4.1 B-3 Configuration Server Setup Appendix B If you want to prevent users from wr iting files to the directory select the “Deny all requests” in the “W rite Request Behavior” category .
.
41-001129-00 Rev 09 , Release 1.4.1 C-1 Appendix C Appendix C Configuring the IP Phone at the Asterisk IP PBX About this appendix Introduction This appendix describes how to setup a u ser ’ s phone with an extension to make and receive calls using the Asterisk as the PBX.
IP Phone at the Asterisk IP PBX C-2 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Appendix C IP Phone at the Asterisk IP PBX The following configur ation illustrates how to create a user with an extension to make and receive calls using the Asterisk as the PBX.
IP Phone at the Asterisk IP PBX 41-001129-00 Rev 09, Release 1.4.1 C-3 Configuring the IP Phone at the Asterisk IP PBX Appendix C ;able to use it. In this examp le' sip' is u sed. Y ou can use ;whatever you like, but make sur e they ar e the same, you will ;need to make an entry in your extensions.
.
41-001129-00 Rev 09 , Release 1.4.1 D-1 Appendix D Appendix D Sample Configuration Files About this appendix Introduction This appendix provides sample co nfigura tion files for the 480i, 480i CT , 91 12i, and 9133i.
Sample Configuration Files D-2 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Appendix D Sample Configuration Files This section consists of the sample conf iguration files necessary to configure t he IP phones. The general format is simila r to configuration files used by several Unix-based programs.
Sample Configuration Files 41-001129-00 Rev 09, Release 1.4.1 D-3 Sample Configuration Files Appendix D # The Aastra 480i, 480iCT, 9 112i and 9133i phones will downlo ad 2 # configuration files from t he TFTP server while restarting, the # "aastra.
Sample Configuration Files D-4 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Appendix D # Network Settings ## = = = = = = = = # Notes: If DHCP is enabled, you do not need to set these net work # settings. Although depend ing on you DHCP server configurat ion you # may still have to set the dns address.
Sample Configuration Files 41-001129-00 Rev 09, Release 1.4.1 D-5 Sample Configuration Files Appendix D # NAT device between the se rver and the phone, then you must set the # following two parameters for the phone to function correct ly.
Sample Configuration Files D-6 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Appendix D ## = = = = = = = = = = = = = = = # Notes: This section define s which server the phone retrieve s new # firmware images and config uration files from.
Sample Configuration Files 41-001129-00 Rev 09, Release 1.4.1 D-7 Sample Configuration Files Appendix D # # (1) The entered number i s an exact match in the dial plan # (2) The "#" symbol ha.
Sample Configuration Files D-8 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Appendix D #sip dial plan terminator: 1 # enable sending of the "#" sy mbol to # to the proxy.
Sample Configuration Files 41-001129-00 Rev 09, Release 1.4.1 D-9 Sample Configuration Files Appendix D sip screen name: Joe Smith # the name display on the phon e's screen sip user name: 4256 # the phone number sip display name: Joseph Smi th # the caller name sent out whe n making # a call.
Sample Configuration Files D-10 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix D sip line3 mode: 1 sip line3 vmail: *78 # configure line 5 (a soft k ey line) as an ordinary.
Sample Configuration Files 41-001129-00 Rev 09, Rel ease 1.4.1 D-11 Sample Configuration Files Appendix D # call/line appearances and have a type, label and value ass ociated # with it as seen here in t he default softkey settings.
Sample Configuration Files D-12 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix D softkey8 value: 4559 softkey8 line: 1 # list softkey11 type: list softkey12 type: list 480i.
Sample Configuration Files 41-001129-00 Rev 09, Rel ease 1.4.1 D-13 Sample Configuration Files Appendix D # configuration files from t he TFTP server while restarting, the # "aastra.
Sample Configuration Files D-14 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix D # Network Settings # ================ # Notes: If DHCP is enabled, you do not need to set these net work # settings. Although depend ing on you DHCP server configurat ion you # may still have to set the dns address.
Sample Configuration Files 41-001129-00 Rev 09, Rel ease 1.4.1 D-15 Sample Configuration Files Appendix D #ip: # This value is uni que to each phone on a server # and should be set in the "<mac>.
Sample Configuration Files D-16 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix D #sip nortel nat timer: 60 # seconds between keep alive messages # Option 2: # # If you are using a sessio n border controller, you should s et the # outbound proxy to the ses sion border controller address #sip outbound proxy: sbc.
Sample Configuration Files 41-001129-00 Rev 09, Rel ease 1.4.1 D-17 Sample Configuration Files Appendix D # Notes: This section define s which server the phone retrieve s new # firmware images and config uration files from.
Sample Configuration Files D-18 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix D # As you dial a number on t he phone, the phone will initiate a call # when one of the foll.
Sample Configuration Files 41-001129-00 Rev 09, Rel ease 1.4.1 D-19 Sample Configuration Files Appendix D # with a 0 or 1, any 5 digit numb er # beginning with a number between 2 and 8 # (inclusive) o.
Sample Configuration Files D-20 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix D # L1 to L4 on the 480i a nd 480iCT # L1 to L3 on the 9133i # L1 on the 9112i # # These can be over-ridden on a per-line basis using the pe r-line # settings.
Sample Configuration Files 41-001129-00 Rev 09, Rel ease 1.4.1 D-21 Sample Configuration Files Appendix D # ===================== # configure line 3 as the su pport Broadsoft SCA line # - the proxy an.
Sample Configuration Files D-22 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix D # ================ # Softkeys can be set either server wide or unique to each ph one. # Setting softkeys as line/c all appearances should be done in the # "<mac>.
Sample Configuration Files 41-001129-00 Rev 09, Rel ease 1.4.1 D-23 Sample Configuration Files Appendix D softkey1 value: *8 softkey2 type: speeddial softkey2 label: "Call Return " softkey2 .
Sample Configuration Files D-24 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix D # phones' handset. These pa rameters can be defined either in t the # aastra.cfg or the <mac>.c fg files. # # The feature keys are disp layed when the user presses the F button # on the cordless phone's h and set.
Sample Configuration Files 41-001129-00 Rev 09, Rel ease 1.4.1 D-25 Sample Configuration Files Appendix D # is set to use Spanish Feature key 0 Gr label: "Gr- Line 1" # German label for the key. Displayed when the phone's langu age # is set to use German Feature key 0 It label: "It- Line 1" # Italian label for the key .
Sample Configuration Files D-26 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix D # # 58 - Menu (Options) # 59 - Feature Key # 60 - Redial # 61 - Directory # 62 - Callers&ap.
Sample Configuration Files 41-001129-00 Rev 09, Rel ease 1.4.1 D-27 Sample Configuration Files Appendix D Feature key 0 control: 0 Feature key 0 hs event: 7 Feature key 0 base event: 1 Feature key 1 En label: "Con f." Feature key 1 Fr label: "Fr- Conf.
Sample Configuration Files D-28 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix D Feature key 5 Sp label: "Sp- Callers" Feature key 5 hs event: 62 Feature key 5 co.
Sample Configuration Files 41-001129-00 Rev 09, Rel ease 1.4.1 D-29 Sample Configuration Files Appendix D 91 12i Sample Configuration File # Sample Configuration File # ========================= # Dat.
Sample Configuration Files D-30 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix D # DHCP Setting # ============ #dhcp: 1 # DHCP enabled.
Sample Configuration Files 41-001129-00 Rev 09, Rel ease 1.4.1 D-31 Sample Configuration Files Appendix D #time server disabled: 1 # Time server disabled. #time server1: # Enable time server and enter at #time server2: # least one time server IP address or #time server3: # qualified domain name.
Sample Configuration Files D-32 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix D # Additional Network Setting s #=========================== = #sip rtp port: 3000 # Eg .
Sample Configuration Files 41-001129-00 Rev 09, Rel ease 1.4.1 D-33 Sample Configuration Files Appendix D # Dial Plan Settings # ================== # # Notes: # # As you dial a number on t he phone, t.
Sample Configuration Files D-34 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix D #sip dial plan terminator: 1 # enable sending of the "#" sy mbol to # to the prox.
Sample Configuration Files 41-001129-00 Rev 09, Rel ease 1.4.1 D-35 Sample Configuration Files Appendix D # proxy. Set to 0 to enable S RV # lookups sip registrar ip: aastra.
Sample Configuration Files D-36 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix D prgkey2 type: speeddial prgkey2 value: *69 # DND Key #prgkey1 type: dnd # blf #prgkey2 type.
Sample Configuration Files 41-001129-00 Rev 09, Rel ease 1.4.1 D-37 Sample Configuration Files Appendix D # for the full list o f supported p arameters, their defa ults and # valid ranges. # # The Aast ra 480i, 48 0iCT, 9112i a nd 9133i ph ones will download 2 # configur ation files from the TFT P server wh ile restar ting, the # "aastra.
Sample Configuration Files D-38 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix D # The "aastra.cf g" file configu res the settings serve r wide, while # the "<ma c>.cfg" fil e configures only the ph one with t he MAC # address for which t he file is na med (for ex ample, # "00085d0 304f4.
Sample Configuration Files 41-001129-00 Rev 09, Rel ease 1.4.1 D-39 Sample Configuration Files Appendix D #ip: # This value is unique to each phone on a serv er # and should be set in th e "<mac>.cf g" file if # setting th is manually.
Sample Configuration Files D-40 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix D #sip nortel nat ti mer: 60 # seconds between keep alive me ssages.
Sample Configuration Files 41-001129-00 Rev 09, Rel ease 1.4.1 D-41 Sample Configuration Files Appendix D # Option 2: # # If you are using a session bord er controll er, you sh ould set th e # outboun d proxy to the session b order contr oller addr ess #sip outbound proxy: sbc.
Sample Configuration Files D-42 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix D.
Sample Configuration Files 41-001129-00 Rev 09, Rel ease 1.4.1 D-43 Sample Configuration Files Appendix D ## TFTP se rver settin gs tftp serv er: 192.168 .0.130 #alternati ve tftp server: #use alter native tftp server: 1 # If your DHCP server assign s # a TFTP s erver addr ess which # you do n ot use, yo u can use # the alternati ve tftp server.
Sample Configuration Files D-44 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix D #.
Sample Configuration Files 41-001129-00 Rev 09, Rel ease 1.4.1 D-45 Sample Configuration Files Appendix D # 0,1,2 ,3,4,5,6,7, 8,9,*,# : ma tches the k eypad symb ols # x : ma tches any d igit (0.
Sample Configuration Files D-46 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix D # General SIP Sett ings # =========== =========== #sip sessi on timer: 3 0 # enab le suppor.
Sample Configuration Files 41-001129-00 Rev 09, Rel ease 1.4.1 D-47 Sample Configuration Files Appendix D sip auth n ame: jsmith # accoun t used to a uthenticat e user sip passwo rd: 12345 # p assword for authentic ation accou nt sip mode: 0 # l ine type: # 0 - generi c, # 1 - BroadS oft SCA li ne # 2 - Nortel line sip proxy ip: proxy.
Sample Configuration Files D-48 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix D sip line5 screen name : Test 1 sip line5 user name: 5551001 sip line5 displa y name: Test 1 sip line5 auth name: 5551001 sip line5 password: 5 551001 sip line5 mode: 0 sip line5 proxy ip : 10.
Sample Configuration Files 41-001129-00 Rev 09, Rel ease 1.4.1 D-49 Sample Configuration Files Appendix D # PRGKEY TYPES: "line" , "speeddial" , "blf", "list", .
.
41-001129-00 Rev 09 , Release 1.4.1 E-1 Appendix E Appendix E Sample BLF Softkey Settings About this appendix Introduction This appendix provides sample BLF softkey settings for both the Asterisk server and the BroadSoft Broad W ork s server .
Sample BLF Softkey Settings E-2 41-001129-00 Rev 09, Release 1.4.1 IP Phone Administra tor Guide Appendix E Sample BLF Softkey Settings Asterisk BLF The following are sample softkey and prog rammable key configura tions to enable Asterisk BLF support on Aastra IP phones.
Sample BLF Softkey Settings 41-001129-00 Rev 09, Release 1.4.1 E-3 Sample BLF Softkey Settings Appendix E BroadSoft BroadWorks BLF The following are sample softkey and prog rammable key configura tions to enable Broadsoft BroadW orks Bus y Lamp Field support on Aastra IP phon es.
.
41-001129-00 Rev 09 , Release 1.4.1 F-1 Appendix F Appendix F Sample Multiple Proxy Server Configuration About this appendix Introduction This appendix provides a sample multiple proxy server configuration.
Multiple Proxy Serv er Configuration F-2 41-001129-00 Rev 09, Re lease 1.4.1 IP Phone Administra tor Guide Appendix F Multiple Proxy Serv er Configuration Multiple proxy servers can be configured in the aastra.
Multiple Proxy Serv er Configuration 41-001129-00 Rev 09, Release 1.4.1 F-3 Sample Multiple Proxy Se rver Configuration Appendix F Continued..... #line 2 sip line2 auth name: sip line2 password: sip l.
.
41-001129-00 Rev 09 , Release 1.4.1 G-1 Appendix G Appendix G Creating an XML Application About this appendix Introduction This appendix provides info rmation required to create an XML application for use on the IP phones.
How to Create an XML Application G-2 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix G How to Create an XML Application This Appendix describes how to create an XML application for your IP ph ones.
How to Create an XML Application 41-001129-00 Rev 09, Release 1.4.1 G-3 Creating an XML Application Appendix G Creating Custom Softkeys Developers can link arbitrary URIs to softkeys in the XML screens and can invoke softkey behavior to each XML scr een type (T ext Menu, T ext Screen , User Input, Directory).
How to Create an XML Application G-4 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix G T ext Menu Object (Menu Screens) The T ext Menu object allow s application developers to create a numerical list of menu items on the I P phones.
How to Create an XML Application 41-001129-00 Rev 09, Release 1.4.1 G-5 Creating an XML Application Appendix G XML example : <AastraIPPhoneTextMenu> <Title>Phone Services</Title > <MenuItem base = "http://10. 50.10.53/"> <Prompt>Traffic Reports</Pro mpt> <URI> rss_to_xml.
How to Create an XML Application G-6 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix G T ext Screen Obj ect (Message Screens) The screen object can be used to display text. The screen word w raps appropriately and can scroll to dis p lay a message longer then four lines.
How to Create an XML Application 41-001129-00 Rev 09, Release 1.4.1 G-7 Creating an XML Application Appendix G XML Screen Example : UserInput Object (User Input Screens) The UserInput object allows application deve lopers to be able to input text on the phone screen where applicable .
How to Create an XML Application G-8 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix G XML Description : <AastraIPPhoneInputScreen ty pe = "IP/string/number" pa.
How to Create an XML Application 41-001129-00 Rev 09, Release 1.4.1 G-9 Creating an XML Application Appendix G XML Example : <AastraIPPhoneInputScreen ty pe = "IP"> <Title>Proxy Server</Title> <Prompt>Server IP:</Prompt> <URL>http://10.
How to Create an XML Application G-10 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix G UserInput Object Implement ation (Number) The following is ho w you would implement the UserInput object using Numbers.
How to Create an XML Application 41-001129-00 Rev 09, Rel ease 1.4.1 G-11 Creating an XML Application Appendix G UserInput Object Implement ation (S tring) The following is how yo u would implement t he UserInput object using S trings in XML.
How to Create an XML Application G-12 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix G Directory Object (Dir ectory List Screen) (480i only) The Director y object allows you to browse an online d irectory in real time. It displays an automatically nu mbered list of contacts.
How to Create an XML Application 41-001129-00 Rev 09, Rel ease 1.4.1 G-13 Creating an XML Application Appendix G XML Example : <AastraIPPhoneDirectory next ="more.xml" previous="back.xml"> <Title>My Directory</Title> <MenuItem> <Prompt>480i - John Doe 1</P rompt> <URI> 10.
How to Create an XML Application G-14 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix G S t atus Message Obj ect (Idle Screen) The IP phones support an XML AastraIPPhoneS tatus object for displaying status messages on a single designated line on the phone’ s idle screen.
How to Create an XML Application 41-001129-00 Rev 09, Rel ease 1.4.1 G-15 Creating an XML Application Appendix G Examples Example 1 : The following is an example of using the AastraIPPhoneS tatus obje.
How to Create an XML Application G-16 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix G Beep Option Y ou can enable or disable a BEEP option using the S tatus Message object (AastraIPPhoneStatus), the configura tion files, or the Aastra W eb UI.
How to Create an XML Application 41-001129-00 Rev 09, Rel ease 1.4.1 G-17 Creating an XML Application Appendix G Execute Commands Object (for executing XML commands) An AastraIPPhoneExecute object on the IP ph ones allows the phone to execute commands using XML.
How to Create an XML Application G-18 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix G The following example shows an Aast raIPPhoneExecute object using the Reset command: .
How to Create an XML Application 41-001129-00 Rev 09, Rel ease 1.4.1 G-19 Creating an XML Application Appendix G HTTP Post In addition to initiating a request to an XML applicati on from the Services menu, an HTTP server can push an XML object to the phone via HTTP Post.
How to Create an XML Application G-20 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix G Example 2 : Below is a sample php source code whic h sends an XML object to an Aastra phone. <?php # function push2phone($server, $phone,$data) { # url-encode the xml object $xml = "xml=".
How to Create an XML Application 41-001129-00 Rev 09, Rel ease 1.4.1 G-21 Creating an XML Application Appendix G HTTP Refresh Header An HTTP refresh header feature can be used with the XML screen objects on the IP phones.
How to Create an XML Application G-22 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix G XML Schema File After creating an XML applicatio n for your IP phone, you can v alidate the XML objects using the Schema file provided in this section.
How to Create an XML Application 41-001129-00 Rev 09, Rel ease 1.4.1 G-23 Creating an XML Application Appendix G <xs:element name="Prom pt" type="xs:string" /> <xs:element.
How to Create an XML Application G-24 41-001129-00 Rev 09 , Release 1.4.1 IP Phone Administra tor Guide Appendix G </xs:attribute> <xs:attribute name="destro yOnExit" default=".
41-001129-00 Rev 09 , Release 1.4.1 Limited W arranty Aastra T elecom warrants this product agai nst defects and malfunctions during a one (1) year period from the date of orig inal purchase.
Limited Warranty 41-001129-00 Rev 09, Release 1.4.1 IP Phone Administra tor Guide W arranty Rep air Services Should the set fai l during the warranty period: In North America, please call 1-800-5 74-161 1 for further information. Outside North America , contact your sales repre senta tive for return instructions.
41-001129-00 Rev 09 , Release 1.4.1 Release 1.4.1 Index-1 Index A Aastra W eb UI advanced settin gs description 8 . basic settings description 7 . enabling and disabling 9 . operation description 7 . status description 6 . Administration Guide, for IP phone xi v .
Index-2 41-001129-00 Rev 09, Release 1.4.1 Index configuration server settings 21 . configuring network 4 . cordless keys configuring 20 . D DHCP 4 . configuring 5 . not using 3 . using 3 . dial plan configuring 11 0 . dial plan terminator overview 109 .
41-001129-00 Rev 09, Release 1.4.1 Index-3 Index M missed calls indica tor accessing and clearing 75 . enabling/disabling 74 . overview 74 . N NA T configuring 17 . configuring NA T address and port 19 . Nortel Networks 17 . overview 15 . router configuration 16 .
Index-4 41-001129-00 Rev 09, Release 1.4.1 Index parameters, sett ing in configuration files 4 . park key 13 . park/pickup about parked/pickup calls 45 . configuring a stat ic c onfiguration 47 . configuring programmable configuration using config files 50 .
41-001129-00 Rev 09, Release 1.4.1 Index-5 Index screen name 15 . SIP settings, network outbound proxy port 16 . outbound proxy server 16 . proxy port 16 . proxy server 16 . registrar 16 . registrar port 16 . registration period 16 . sofkeys overview 12 .
.
.
SIP IP Phone Administrator Guide Models 480i, 480i CT , 91 12i, 9133i © 2006 Aastra T elecom Inc. If you’ve read this owner ’s manual and consulted the Troubleshooting section and still have problems, please vi sit our website at www .aastra.com or call 1-800-574- 161 1 for technical assistance.
Ein wichtiger Punkt beim Kauf des Geräts Aastra SIP 480I (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Aastra SIP 480I noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Aastra SIP 480I - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Aastra SIP 480I reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Aastra SIP 480I erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Aastra SIP 480I besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Aastra SIP 480I verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Aastra SIP 480I. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Aastra SIP 480I gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
