Benutzeranleitung / Produktwartung XV-THS7 des Produzenten JVC
Zur Seite of 48
L VT1149-010A [A, US, UB , UW , UG, UX] English D VD DIGIT AL CINEMA SYSTEM INSTR UCTIONS Consists of XV -THS9, SP-PWS9, SP-THS9F, SP-THS9C and SP-THS9S Consists of XV -THS7, SP-PWS7, SP-THS7F, SP-THS9C and SP-THS7S TH-S9S7[A]-01Cov1.
G-1 W arnings, Cautions and Others CAUTION T o reduce the risk of electrical shocks, fire, etc.: 1. Do not remov e scre ws, covers or cabinet. 2. Do not expo se this appliance to rain or moisture. CAUTION — F button! (XV-THS9/XV-THS7) Disconnect the mains plug to shut the po wer off completely (the ST ANDBY lamp goes off).
Warnings, Cautions and Others G-2 Caution: Proper Ventilation T o av oid risk of electric shock and f ire and to protect from damage, place the apparatus on a le vel surface.
1 T able of contents Introduction ..................................... 2 Notes on handling ............. ............ .............. .............. ........... .2 Supplied accessories ............................................................2 About discs and memory cards .
2 Introduction 7 Important cautions Installation of the system • Select a place which is le vel, dry and neither too hot nor too cold; between 5°C and 35°C. • Leave suff icient distance between the system and the TV . • Do not use the system in a place subject to vibration.
3 About discs and memor y cards This system has been designed to play back the following discs: D VD VIDEO, DVD A UDIO, V ideo CD (VCD), Super V ideo CD (SVCD), Audio CD (CD), CD-R and CD-R W . • This syste m accommodates the NTSC and P AL s ystem. When you play an NTSC disc with the scan mode set to “P AL” ( A pg.
About discs and memory cards 4 • The system recognizes up to 150 tracks (f iles) per group, 99 groups per disc, and the total number of the tracks (f iles) that the system can play is 1000.
5 Description of parts and controls The illustrations of the center unit and the subw oofer used in this manual are of TH-S9 unless oth erwise noted. Front panel (center unit) Rear panel (center unit) VOLUME SD/MMC ST ANDBY PHONES Display window pg. 25 pg.
Description of parts and controls 6 Powered subwoofer SP-PWS9/SP-PWS7 NOTE • For s afety reasons, always ensure that there is sufficient space behind the powered subwoofer. Front Rear PO WER ON lamp: pg. 16 pg. 10 pg. 12 Do not block the ventilation openings.
Description of parts and controls 7 Remote control Putting batteries in the remote control If the range or effecti veness of the remote control decreases, replace both batteries. CAUTION • Do not expose batteries to heat or flame. Operating the system from the remote control Aim the remote control directly to the front panel of the center unit.
8 Connections 7 AM loop antenna Setting up sup plied AM loop antenn a Connecting AM l oop antenna • T urn the loop antenna until you hav e the best reception during AM broadcast program reception. NOTE • Make sure the antenna conductors do not touch any other terminals, connecting cords and power cords.
Connections 9 The following procedur e explains the front speaker assemb ly . The assembly of both the front and surround speakers ar e done in the same manner . NOTE • The stands and the base plates are commonly used fo r both front and surround speakers assembly.
Connections 10 CAUTION • W hen you connect spea kers other than the supplied ones, use speakers of the same speaker impedance (SPEAKER IMPED ANCE) indicated near the speaker terminals on the rear of the po wered subwoofer . • DO NOT connect more than one speaker to one speaker terminal.
Connections 11 CAUTION • When you connect speak ers other than the supplied ones, use speakers of the same speaker impedance (SPEAKER IMPED ANCE) indicated near the speaker terminals on the rear of the po wered subwoofer . • DO NOT connect more than one speaker to one speaker terminal.
Connections 12 NOTE • Although the satellite speakers and the powered subwoofer are magnetically shielded, the TV screen may appear mottled. In this case, keep enough distanc e between the speakers and the TV. • The speakers are magnetically shielded to avoid color distortions on TVs.
Connections 13 Y ou can enjoy the sound of an analog component. NOTE • T he signals input to the VIDEO VCR IN jack will be output only from the VIDEO OUT jack, not from the S-VIDEO OUT jack.
14 Operating external components with the remote control NOTE • M anufacturers’ codes are subject to change without notice. • S et the codes again after replacing the batteries of the remote control. 7 To set the manufact urer’s code Y ou can operate a JVC TV without setting the manufacturer’ s code.
Operating external components with the remote control 15 5 Press number buttons (1-9, 0) to enter the manufacturer’s code (2 digits). Examples: For a GI Jerrold product: Press 0 , the n 1 . For a Son y product: Press 2 , the n 0 . 6 Release F VCR/DBS.
16 Basic operations IMPORTANT Before using the remote control for the following operation; • Set the remote control mode sele ctor to A UDIO . On the remote control: Press F AUDIO. On the center unit: Press F . When D VD is selected as the source ( A pg.
Basic operations 17 On the remote contro l: Press one of the source selecting buttons (DVD, CARD, FM/AM, VCR or DBS). DV D : T o play back a disc (DVD VIDEO, VCD etc.). ( A pg. 20) CARD : T o play back a memory card. ( A pg. 20) FM/AM : T o tune in an FM or AM station.
Basic operations 18 The system turns of f automatically when the specified period of time has passed. Press SLEEP. Each time you press the button, the shut-of f time changes. Example: To check the remaining time Press SLEEP once. To change the remaining time Press SLEEP r epeatedly .
Basic operations 19 NOTE • When you change the positioning of the speakers or listener, or replace the supplied speakers with other ones, perform Smart Surround Setup again. 7 While DVD is selected as the source and stopped 1 Take your position where you listen to the sound.
20 Playback • The icon such as shows the types of discs/memory cards the operation is av ailable for . IMPORTANT Before using the remote control for the followi ng operation; 1 Set the remote control mode se lector to A UDIO . 2P r e s s DV D or CARD depending on which media you w ant to play .
Playback 21 7 On-screen guide icons During D VD VIDEO playback, the following guide icons may appear for a while on the TV screen; • : appears at the beginn ing of a scene containing multi- subtitle languages. • : appears at the beginn ing of a scene containing multi-audio languages.
Playback 22 JPEG MPEG4 NOTE • You can change the time information mode (except for MP3/WMA/ JPEG/MPEG4). ( A pg. 26) • You can also check the playback info rmation on the TV screen. ( A pg. 25) 7 Screen saver A TV screen may burn out if a static picture is displayed for a long time.
Playback 23 7 Using number buttons on the rem ote control 7 For DVD VIDEO (title, chapter): While stopped, the title number is selected. During playback, the chapter number is selected.
24 Advanced operations • The icon such as sho ws the types of di scs/memory cards the operation is av ailable for . IMPORTANT Before using the remote control for the followi ng operation; 1 Set the remote control mode se lector to A UDIO . 2P r e s s DV D or CARD depending on which media you w ant to play .
Advanced operations 25 7 All Channel Stereo (DSP) All Channel Stereo (ALL CH ST .) mode can reproduce a larger stereo sound fi eld using all the connected (and activ ated) speakers. All Channel Stereo can be used while reproducing 2 channel stereo source.
Advanced operations 26 Example: During DVD VIDEO playback • The currently selected it em shows green. 7 Contents of the on-scree n bar during playback DVD VIDEO DVD AUDIO VCD SVCD CD MPEG4 * 1 *1 7 – N are not available. *2 When CARD is selected as the source, “ CARD ” appears.
Advanced operations 27 Y ou can start playing a title, chapter or track you specify . Y ou can also play a disc from specif ied time. Locating a desired scene from the DVD menu D VD VIDEOs generally ha ve their own menus which show disc contents and you can display them on the TV screen.
Advanced operations 28 5 Press ENTER. 6 Press ON SCREEN. The on-screen bar disappears. NOTE • You can select up to the 99th chapter/track. Locating a desired position by specifying the time 7 For DV.
Advanced operations 29 7 For MP3/WMA: During playback or while stopped For JPEG/MP EG4: While stopped 1 Press Cursor 3 / 2 / Y / 5 to select the desired group/track/file. • For MP3/WMA, playback starts from the select ed track. 2 Press 3 (play button) or ENTER.
Advanced operations 30 When using the on-screen bar: 1 Press ON SCREEN twice. The on-screen bar appears on the TV screen. 2 Press Cursor 3 / 2 to highlight . 3 Press ENTER. 4 Press Cursor Y / 5 repeatedly to select the desired subtitle. 5 Press ENTER.
Advanced operations 31 Selecting browsable still picture recorded on DVD AUDIO Most D VD A UDIOs include bro wsable still pictures (B.S.P .), which usually ap pear b y turns automaticall y during playback according to the playback sequence.
Advanced operations 32 4 Press ENTER. Example: 5 Press Cursor Y / 5 to change the setting. 6 Press ENTER. The current VFP settings appe ar again. 7 Repeat steps 3 to 6 to adjust other parameters. 8 Press VFP. NOTE • Although the setting display disappears in th e middle of the procedure, the setting at that time will be stored.
Advanced operations 33 Y ou can play titles or tracks on a disc in random order . 7 While stopped 1 Press PLAY MODE repeatedly until appears on the TV screen. 2 Press 3 (play button). To quit Random mo de While stopped, press PLA Y MODE repeatedly until both program window and d isappear from the TV screen.
Advanced operations 34 Repeating a desired part [A-B Repeat] Y ou can repeat playback of a desired part by specifying the beginning (point A) and ending (point B). 7 During playback When using the A-B RPT button: 1 Press A-B RPT at the beginning of the part you want to repeat (point A).
Advanced operations 35 IMPORTANT Before using the remote control for the following operation; • Set the remote control mode sele ctor to A UDIO . NOTE Before you start operation; • T here is a time limit when doing the following steps. If the setting is cancelled before you finish, start from step 1 again.
36 Setting DVD preferences • Y ou can change the language used in the setup menus. See “ Menu description ” belo w . Basic operation on the setup menus IMPORTANT Before using the remote control for the followi ng operation; 1 Set the remote control mode se lector to A UDIO .
Setting DVD preferences 37 : Picture menu (PICTURE) 7 MONIT OR TYPE Y ou can select the monitor type to match your TV when you play D VDs recorded in the p icture’ s height/width ratio of 16:9. • 16:9/16:9 MUL TI (Wide televisi on con version) Select this when the aspect ratio of your TV is 1 6:9 (wide TV).
Setting DVD preferences 38 : Other setting menu (OTHERS) 7 RESUME Y ou can activ ate or deactiv ate Resume Play back function. ( A pg. 29) 7 ON SCREEN GUIDE Y ou can activ ate or deactiv ate the on-screen guide icons.
39 T uner operations IMPORTANT Before using the remote control for the followi ng operation; 1 Set the remote control mode se lector to A UDIO . 2P r e s s FM /AM .
T uner operations 40 Once a station is assigned to a channel number , the station can be quickly tuned in. Y ou can preset 30 FM and 15 AM stations. 7 To preset the stations 1 Tune in the station you want to preset. • If you want to store the FM reception mode for an FM station, select the reception mode you want.
41 A V COMPU LINK remote control system The A V COMPU LINK remote control system allo ws you to operate JVC TVs and VCRs through the center unit. This system is equipped with the A V COMPU LINK-III, which adds a function to operate JVC ’ s video components via the video components terminals.
42 References 7 Handling Discs • Remove the disc from its case by holding it at the edge while pressing the center hole lightly . • Do not touch the shin y surface of the disc or bend the disc. • Put the disc back in its case after use to prev ent warping.
References 43 7 Center unit (XV-THS9/XV-THS7) Audio section T otal Harmonic Distortion 0.02 % NOTE: This value is measured at System cord CONNECTOR for reference.
References 44 7 Satellite Speakers Front speakers (SP-THS7F) Speaker s: W oofer: 8.0 cm T weeter: 1.5 cm Bass-reflex, Magne tically Shielded Power Handling Capacity: 120 W Impedance: 4 C Frequency Range: 90 Hz to 20 kHz Dimensions (W M H M D): 104.5 mm M 139 mm M 101 mm Mass: 0.
EN 0404SKMIDEJEM © 2004 VICT OR COMP ANY OF JAP AN, LIMITED TH-S9/TH-S7 D VD DIGIT AL CINEMA SYSTEM Mains (AC) Line Instruction (not applicable for Hong Kong and Australia) SP-PWS9 SP-PWS7 CAUTION fo.
Ein wichtiger Punkt beim Kauf des Geräts JVC XV-THS7 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC XV-THS7 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC XV-THS7 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC XV-THS7 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC XV-THS7 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC XV-THS7 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC XV-THS7 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC XV-THS7. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC XV-THS7 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
