Benutzeranleitung / Produktwartung UX-J66V des Produzenten JVC
Zur Seite of 36
GVT01 16-003B [US, UN] For Customer Use: Enter below the Model No . and Serial No. which are located either on the rear , bot- tom or side of the cabinet.
– G-1 – W arnings, Cautions and Others CAUTION • Do not block the ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.) • Do not place any naked flame sources, such as lighted candles, on the apparatus.
– G-2 – IMPORTANT FOR LASER PRODUCTS Caution: Proper V entilation T o avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1 Front: No obstructions and open spacing. 2 Sides/ T op/ Back: No obstructions should be placed in the areas shown by the dimensions below .
1 English Introduction About This Manual This manual is organized as follo ws: • The manual mainly explains operations using the buttons on the r emote control. Y ou can use the b uttons both on the remote contr ol and on the main unit f or the same operations if they hav e the same or similar names (or marks), unless mentioned otherwise.
2 English Contents Location of the Buttons and Contr ols ....................... 3 Front Panel and T op V ie w .......................................... 3 Remote Control .......................................................... 5 Getting Started ...
3 English Front Panel FOR UX-J55V : FOR UX-J55V : Location of the Buttons and Control Become familiar with the b uttons and control on your unit. Front Panel and T op View UX-J66V 1 2 3 4 8 9 p q e r y u i t w 5 6 7 MICRO COMPONENT SYSTEM VIDEO CD VERSION 2.
4 English Front Panel 1 Disc tray 2 Display window 3 RETURN button (20 – 21) 4 A UX button (10) Pr essing this button also turns on the unit. 5 ST ANDBY/ON button and ST ANDBY/ON lamp (10, 29) 6 REC.
5 English 1 Number buttons 2 B ASS button (10) 3 Multi operation buttons • 3 UP , 4 PREV (re verse skip), 7 (stop), ¢ NEXT (forward skip) and 4 DO WN 4 SET button (12, 17) 5 Source buttons • 3 / 8 CD/SELECT , 2 3 T APE, FM/AM and A UX Pr essing one of these buttons also turns on the unit.
6 English Getting Started Supplied Accessories Make sure that you ha ve all the follo wing items. The number in parentheses indicates the quantity of each piece supplied.
7 English INPUT INPUT INPUT INPUT RIGHT LEFT MAIN SPEAKERS CAUTION: SPEAKER IMPEDANCE 6 -16 SUBWOOFERS RIGHT LEFT 1 If the cords are co ver ed with insulation, remo ve a short section of insulation at the end of each cord by twisting and pulling it off.
8 English RL AUX L R L R Speaker grille T o remov e the speaker grille, insert your fingers at the top of the speaker grille, pull to wards you. Then pull the bottom tow ards you. T o attach the speaker grille, put the projections of the speaker grille into the holes of the speaker .
9 English Common Operations T o change the clock 1 Make sur e the (timer) indicator is not lit on the display . • If it is lit, press and hold CLOCK/TIMER until it goes of f. 2 Press CLOCK/TIMER r epeatedly until the unit enters the clock setting mode (the hour digits start flashing on the display).
10 English T urning On the Power T o turn on the unit, press ST ANDBY/ON . The ST ANDBY/ON lamp lights green and “HELLO” appears on the display . • When you press the source button—CD 3 / 8 , T APE 2 3 , FM/AM, and A UX, the unit automatically turns on and starts playback if the source is ready .
11 English Selecting the Display Color (ONL Y FOR UX-J66V) Y ou can select the display color (COLOR 1 – COLOR 5 and A UTO mode). • A UTO mode changes the color (COLOR 1 to COLOR 5) gradually .
12 English Listening to FM and AM Broadcasts T uning in to a Station 1 Press FM/AM to select the band. The unit automatically turns on and tunes in to the previously recei ved station—either FM or AM. • Each time you press the button, the band alternates between FM and AM.
13 English T uning in to a Preset Station On the remote contr ol ONL Y : 1 Press FM/AM to select the band. The unit automatically turns on and tunes in to the previously recei ved station—either FM or AM. • Each time you press the button, the band alternates between FM and AM.
14 English Disc Introduction This unit has been designed to playback the following CDs: • CD (Audio CD) • CD-R (CD-Recordable) • CD-R W (CD-Rewritable) • MP3 disc (MP3 files recorded on a CD-R or CD-R W) What is MP3? MP3 is an abbre viation of Motion Picture Experts Group 1 (or MPEG-1) Audio Layer 3.
15 English Playing Back Discs (CD/CD-R/CD-RW/MP3) When playing a CD-R or CD-RW User-edited CD-Rs (CD-Recordable) and CD-R Ws (CD-ReWritable) can be played only if they are already “finalized. ” • Usually you can play back your original CD-Rs or CD- R Ws recorded in music CD format.
16 English ■ For MP3 discs 1 Load a disc. The unit searches for the disc (it may take some time), and the follo wing information appears on the display (the group title will scrolls on the display). 2 Press ¢ NEXT or PREV 4 (or ¢ NEXT/PREV 4 on the r emote control) to select a group y ou want, then press CD 3 / 8 .
17 English Programming the Playing Order of the T racks — Program Play Y ou can arrange the order in which tracks play befor e you start playing. Y ou can pr ogram up to 50 tracks. On the remote contr ol ONL Y : 1 Load a disc. • If the current playing source is not the CD player , press CD 3 / 8 , then 7 before going to the next step.
18 English Prohibiting Disc Ejection — T ray Lock Y ou can lock the disc tray and prohibit ejecting the disc whether the unit is on or of f. On the unit ONL Y : T o prohibit disc ejection, press CD ‹ / 8 while holding 7 . • If the disc tray is opened, close it first.
19 English Using the Video CD Player (Video CDs) Y ou can play video CDs (with or without the Playback Control (PBC) function) to watch the picture on your TV while listening to the sound through your JVC Micro Component System. Befor e playing video CDs Make sure that the connection between the System and your TV is correct.
20 English Playing Video CDs with the PBC Function Using the Menu Screen (Menu-Driven Play) Before playing, make sure that Repeat indicator “ ” or “ ALL ” is not lit. If lit, press the REPEA T b utton on the Remote Control until the repeat indicator goes of f.
21 English 1 2 3 1 2 3 1 2 2 1 3 1 2 31 2 Menu Screen Moving Picture Still Picture T o next screen press RETURN press RETURN press RETURN T o previous screen A selection menu is displayed when you start playing a video CD with PBC. The selection menu sho ws a list of numbers for selection.
22 English Display of Operating Status Y ou can vie w the current operating status on the TV screen. Press the ON SCREEN button. Pressing the abov e button alternates between on-screen display ON and OFF . • Once you hav e turned on the on-screen display , the track number and playing time are always displayed on the TV screen.
23 English Playing Back T apes Y ou can play back type I tapes. Playing Back a T ape 1 Press PUSH OPEN 0 on the unit. 2 Put a cassette in with the exposed part of the tape down. 3 Press PUSH OPEN 0 again to close the cassette holder . 4 Press T APE 2 3 .
24 English Recording Recording on a T ape On the unit ONL Y : 1 Put a recordable cassette in with the exposed part of the tape down. 2 Close the cassette holder gently and check the recording dir ection f or the tape. • If the tape direction is not correct, press T APE 2 3 twice then 7 to change the tape direction.
25 English Disc Direct Recording Everything on the disc goes onto the tape in the order it is on the disc, or according to the order you hav e set in Program Play . On the unit ONL Y : 1 Put a recordable cassette in with the exposed part of the tape down.
26 English Using the Microphone and Multiplex CDs By plugging in the microphone, you can use the System for Karaoke or microphone mixing. Y ou can also add an echo to the microphone’ s sound. Karaoke and microphone mixing ar e only av ailable when y ou select the CD source with a playable disc inside.
27 English Microphone mixing is not av ailable for other sources such as T ape, T uner or Aux. 4 Adjust the main volume and the MIC V OLUME control as y ou sing into the microphone. • T o apply echo, pr ess the DIGIT AL ECHO button on the Remote Control until “ECHO ON” appears on the display .
28 English Using the T imers There are three timers av ailable—Daily T imer, Recording T imer , and Sleep T imer . Before using the timers, you need to set the unit’ s clock (see page 9). Using Daily Timer and Recor ding Timer Y ou can set the timer whether the unit is on or of f.
29 English 5 Press UP or DO WN to set the volume level, then press CLOCK/TIMER. • Y ou can select the volume le vel (“V OLUME – –” and “V OLUME 0” to “V OLUME 40”). If you select “V OLUME – –, ” the volume is set to the previous le vel when the unit was turned of f.
30 English Maintenance Handling cassette tapes • If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating. • If the tape is loose, it may get stretched, cut, or caught in the cassette. • Be careful not to touch the tape surface.
31 English T roubleshooting If you are having a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints gi ven here, or the unit has been ph ysically damaged, call a qualified person, such as your dealer , for service.
32 English Specifications UX-J66V (CA-UXJ66V and SP-UXJ66V) Amplifier Output Power: SUBWOOFERS: 90 W (45 W + 45 W) at 6 Ω (10% THD) MAIN SPEAKERS: 30 W (15 W + 15 W) at 6 Ω (10% THD) Audio input sensiti vity/Impedance (at 1 kHz) A UX: 400 mV/48 k Ω Speakers/Impedance: 6 Ω – 16 Ω T uner FM tuning range: 87.
RL OPTICAL DIGIT AL OUT AM EXT FM COAXIAL AM LOOP 75 ANTENNA AUX VOL T AGE SELECTOR 110V 127V 220V 230V -240V VOL T AGE SELECTOR 110V 127V 220V 230V -240V VICT OR COMP ANY OF JAP AN, LIMITED EN, CH, TH 0403AOKFLEJEM Mains (AC) Line Instruction (not applicable for Europe, U.
Ein wichtiger Punkt beim Kauf des Geräts JVC UX-J66V (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC UX-J66V noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC UX-J66V - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC UX-J66V reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC UX-J66V erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC UX-J66V besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC UX-J66V verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC UX-J66V. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC UX-J66V gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
