Benutzeranleitung / Produktwartung TH-D5 Series des Produzenten JVC
Zur Seite of 40
INSTRUCTIONS LVT1704-011B [US,UW ,UG,UX, UA] TH-D7 Consists of XV -THD7, SP-THD7W , SP-THD7F , SP-THD7C and SP-THD7S TH-D5 Consists of XV -THD5, SP-THD5W , SP-THD5F , SP-THD5C and SP-THD5S DVD DIGITAL CINEMA SYSTEM Cover1_TH-D7D5[U].
G-1 IMPORT ANT FOR LASER PR ODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover or cabinet. There are no user serviceable parts inside the unit; leave all servicing to qualifie d service personnel. 3. CAUTION: V isible and/o r invisible cla ss 1M laser radiation when open.
G-2 Caution: Pr oper V entilation T o avoid risk of electric shock and fire and to protect from damage, place the apparatus on a level surface. The minimal clearances are shown below: 15 cm Wall or ob.
1 How to read this manual • Illustrations and bu tton names of the TH-D7 are mainly used for explanation. • The following icons and illustr ations are used to make the explanations simple and easy-to-understand.
2 Notes on installing the System • Select a locati on which is leve l, dry and neither too hot nor too cold between 5°C and 35°C. • Do not install the System in a locat ion subject to vibrations.
3 This System accommo dates the PAL and NTSC system. It is possible to play back finalized +R/+RW (DVD Video format only) discs. “DVD” ligh ts on the display when a +R/+RW disc is loaded. DVD-R/-RW: This System does n ot support “multi- border” discs.
4 USB mass storage class device A USB flash memory device, ha rd disk drive , multimedia card reader, digita l camera, etc. ca n be used with this S ystem through a USB connection. This System is compatible with USB 2.0 Full Speed. This System cannot recognize a USB mass storage class device whose rating exceeds 5 V/500 mA.
5 If anything is missing, cont act your dealer immediately. • Remote control (x 1) • Batteries (x 2) • FM antenna (x 1) • AM loop antenna (x 1) • Composite video cord (x 1) • AC plug adapt.
6 If you connect speakers other than those sup plied for the System, use speakers of the same speaker impedance (SPEAKER IMPEDANCE) indicated on the rear of the center unit. DO NOT connect more than one speaker to one speaker terminal. TH-D7 only : – You can install the front spea kers on the wall.
7 You can enjoy surround sound by placing the speakers as illustrated (Speaker layout A or B). Speaker layout A Select “S.SPK R” as the speaker position mode for this layout. ( 13 ) To obtain the best possible surround sou nd from this System, place all the speak ers except the subwoofer at the same distance from th e listening position.
8 Make sure the antenna c onductors do not touch any other terminals, connectin g cords or power cords. Connect the TV to the appropri ate video out jacks to view the playback picture.
9 Connection using the component video jacks Do not connect the TVs via both the COMPONENT jacks and HDMI MONITOR OUT terminal at the same time. For the BNC connection, us e a p lug adapter (not supplied).
10 Audio connection Connecting a di gital component The initial setting for the audio input setting is “OPT .” When using COAXIAL jack, change the setting to “COAX” before playing back. ( 14) Connecting an analog component Select “2CH” as the audio input setting before playing back.
11 How to use the number buttons To sele ct 3: Press 3 . To select 10: Press 10 . To select 14: Press h 10 , 1 , then 4 . To select 24: Press h 10 , 2 , then 4 . To select 40: Press h 10 , 4 , then 0 . To select 114: Press h 10 , h 10 , 1 , 1 , then 4 .
12 Turning the power on or off To turn off the System by using the sleep tim er To check the remaining time, press the button once. Selecting the source To select the source from the center unit * Make sure that the appropriat e audio input setting have been made for the source (VIDEO1/VIDEO2 or VIDEO).
13 Selecting the speaker position mode Select the speaker position mode according to your speaker layout ( 7). 1 Turn off the System. ( 1 2) 2 3 Select the appropriate speaker position mode according to your speaker layout ( 7 ).
14 Using the surround mode Select one of the available surround modes. • During 2-channel playback with “S.SPK R” speaker position mode: • During multi-channel pl ayback with “S.SPK R” speaker posit ion mode: • During playback with “S.
15 4 Select an appropriate au dio input a ccording to the audio connection. ( 9 ) You can select the following setti ngs for each source (underlined items are the in itial settings fo r each source): – “VIDEO1”: 5.
16 Starting playback Be sure to reduce the volume on the System to the minimum level befo re connecting an i Pod. Adjust the volume after playback has started. 1 Connect an iPod while th e System is turned off. • Connect the plug with the arr ow-mark side facing up.
17 Playing back a disc 1 Select “DVD” as the source. ( 12) 2 3 Place a disc on the tray. 4 Start playba ck. • JPEG: Slide-show starts. • MP3/WMA/WAV: T he file control display appears on the TV. ( 24) Playing back a file on a USB mass storage class device 1 Connect a USB mass storage class device while the System is turned off.
18 DO NOT connect or disconnect the device when the System is turned on. You cannot connect a compute r to the USB MEMORY terminal of the System. DO NOT connect the device through a USB hub . iPod does not play through the USB MEMORY terminal. When iPod is connected to the USB MEMORY terminal, “RESTRICT” appears on the display.
19 For DVD Video/DVD Audio 1 2 Select the desired it em, then confirm the selection. For some discs, you can also select items by us ing the number buttons. For VCD/SVCD with PBC The Play Back Control function (PBC) allows you to operate the VCD/SVCD using menus.
20 Programing the playin g order—program play 1 2 Select the desired chapters/ tracks. • For DVD Video, DVD Audio, MP3 and WMA: Enter a title/group number, then a chapter/trac k number.
21 Changing the language/sound/scene angle For DVD Audio, the functions take effect for the moving picture part only. * 1 For DVD VR and SVCD discs, the subtitle indication appears and can be c hanged by performing the above procedure even if no subtitles are recorded.
22 Adjusting the picture quality (VFP) You can adjust the picture mode. 1 2 Select the desired preset, then finish the setting. To adjust the picture tone 1 Select “USER1” or “USER2” (see above). 2 Select a parameter, then confirm the selection.
23 Using the on-screen bar You can use various functions from the on- screen bar. Basic operatio n procedure 1 2 Select the desired item (see the right column), then confirm the selection.
24 Using the file control display The file control displa y appears in the following cases. – Audio files: Always ap pears. – Movie and picture files: When TOP MENU(/PG) or MENU(/PL) is pressed or playback is stopped. File control display To play back the desired track/file Select a desired group/track/file, then start playback.
25 You can change the settings of the System according to your preferences and playing environment. 1 2 Select the menu. 3 Select the item, then confirm. Repeat this procedure until all the options have been confirmed. To close the se tup screen Set the remote control mode before operation.
26 Picture menu (PICTURE) MONITOR TYPE Select 16:9 wide-screen pla yback to fit on your monitor. PICTURE SOURCE Select the source type of the disc/file conten ts when selecting the progressive scanning mode ( 15).
27 SPK.SETTING menu is avai lable only when the speaker position mode is set to “S.SPK R” ( 13). Speaker setting me nu (SPK.SETTING) LEVEL Adjust the output level of each spea ker while monitoring the test tone. FRONT LEFT/RIGHT SPEAKER, CENT ER SPEAKER, SURROUND RIGHT/LEFT SPEAKER: Select the speaker, then adjust the outp ut level.
28 Some countries spac e AM stations 9 kHz apart, and some countries use 10 kHz spacing. You can only change the AM t uner inte rval spacing while selecting “A M” as the band. • This operation is available when the System is turned off. Tuning in to a station You can also tune in to a station automatical ly.
29 1 Connect the microph one(s) to the MIC 1 or/and MIC 2 jack on the center unit. 2 Select “DVD” as the source. 3 Activate the Karaoke function. 4 Start playing a disc. • You can select the audio chann el for a disc. See “Selecting the audio channel” ( 30).
30 The audio channel can be selectable with most of the Karaoke discs. Each time you press AUDIO , the audio channel changes as follows: • Example for a VCD: – ST: To listen to L (left) and R (right) audio channels. – L: To listen to L (left) audio channel.
31 Before operating external co mponents from the remote control, set the ma nufacturer’s code. 1 Set the remote control mode (see above). 2 Press and hold for the target component until the setting is finished. 3 4 Enter the manufacturer’s code. See “Manufacturer’s code list” for the manufacturer’s code.
32 TV DBS tuner or CATV converter VCR * Initial se tting Manufacturers’ codes are subject to change without notice. Manufacturer’s code list JVC 01 * Samsung 12 Hitachi 10 Sanyo 13, 14 Magnavox 02 Sharp 06 Mitsubishi 03 Sony 07 Panasonic 04, 11 Toshiba 08 Philips 15 Zenith 09 RCA 05 Echostar 21 G.
33 You can change the setting so that the on-screen guide icons do not appear on the TV. ( 27) Power does not come on. Z The power plug is not insert ed se curely. Plug it in securely. Unable to operate the System from the remote control. Z The path between the remote control and the remote sensor on the center unit is blocked.
34 Video and audi o are distorted. Z The disc is scratched or dirty. Z Audio/video files have not be en properly copied on to the USB mass storage class device. Z A VCR is connected between the center unit and the TV. Connect the center unit and TV directly.
35 Center unit (XV-THD7/XV-THD5) Output power Front: 140 W per channel, RMS at 4 Ω at 1 kHz, with 10 % total harmonic distortion. Center: 130 W , RMS at 4 Ω at 1 kHz, with 10 % total harmonic distortion. Surround: 130 W per channel, RMS at 4 Ω at 1 kHz, with 10 % total harmonic distortion.
36 Satellite speakers (For TH-D7) Front speakers (SP-T HD7F) T ype: 2-W ay 3-Speaker Bass-Refl ex T ype (Magnetically Shielded T ype) Speaker: 8 cm cone × 2 3 cm dome × 1 Power Handling Capacity: 14.
DVD DIGITAL CI NEMA SYSTEM 0607RYMMDWJMM EN © 2007 Victor Company of Japan, Limited TH-D7/TH-D5 Mains (AC) Line Instruction CAUTION for mains (AC) line BEFORE PLUGGING IN, do check that your mains (A.
Ein wichtiger Punkt beim Kauf des Geräts JVC TH-D5 Series (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC TH-D5 Series noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC TH-D5 Series - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC TH-D5 Series reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC TH-D5 Series erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC TH-D5 Series besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC TH-D5 Series verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC TH-D5 Series. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC TH-D5 Series gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
