Benutzeranleitung / Produktwartung TH-A10R des Produzenten JVC
Zur Seite of 68
L VT0516-001A [ B ] For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear , bottom or side of the cabinet. Retain this information for future reference. Model No. Serial No. TH-A10R D VD DIGIT AL CINEMA SYSTEM INSTRUCTIONS Consists of XV -THA10R, SP-PW A10, SP-XCA10, and SP-XSA10.
G-1 W arnings, Cautions and Other s 1. CLASS 1 LASER PRODUCT 2. DANGER : Visible and invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 3. CAUTION : Do not open the top cover. There are no user service- able parts inside the Unit; leave all servicing to qualified service personnel.
DVD DIGIT AL CINEMA SYSTEM TH-A10R Simplified connection manual Please see INSTRUCTIONS from page 6 to page 10 as well. XV -THA10R (Center unit) SP-PWA10 (Powered sub-woofer) FM and AM antenna termina.
Installation Example TV Satellite speaker (front left stpeker) Satellite speaker (front right speaker) Center speaker Powered sub-woofer Satellite speaker (rear left speaker) Satellite speaker (rear right speaker) The rear speakers are placed behind the listening position.
1 T able of Contents Getting Started ........................................................................................... 2 Important cautions ........................................................................ 2 Safety precautions .......
2 Getting Star ted Important cautions Installation of the unit • Select a place which is le vel, dry and neither too hot nor too cold between 5°C and 35°C (41°F and 95°F). • Leav e sufficient distance between the unit and the TV . • Do not use the unit in a place subject to vibrations.
3 System outline This system consists of the center unit containing a D VD player , a radio, and a pre-amp, as well as the powered sub-woofer , the center speaker , and four satellite speaker units. It provides a fully functional D VD theater system by simply connecting to a TV set.
4 T o attach non-slip rubbers to the center speaker Attach the supplied non-slip rubbers at three points on the bottom of the center speaker . Installation Example —————————————————— CAUTIONS: • For safety reasons, always ensure that there is sufficient place behind the powered sub-woofer .
5 About discs Playable disc types Playable and non-playable disc types are as follo ws: Playable discs ——————————————— DVD VIDEO Video CD Audio CD The D VD Logo is a trademark.
6 Connections Connecting the FM and AM (MW) antennas FM antenna connections ——————————— A. Using the supplied FM antenna The FM antenna provided can be connected to the FM 75 Ω CO AXIAL terminal as temporary measure.
7 T o connect speakers Connect the satellite speakers and center speaker to the terminals on the po wered sub-woofer using the speaker cords supplied. Labels are attached to the speaker cords to indicate the speaker and terminal to which eac h is to be connected.
8 Connecting Audio/V ideo Components Y ou can connect the following audio/video components to this system. Refer also to the manuals supplied with your components.
9 TV audio or DBS tuner TV sound Note: • When connecting the DBS tuner to the TV SOUND/DBS jacks, chang e the sour ce name, which will be sho wn on the display when selected as the source, to “DBS”.
10 Connecting the power cord Before plugging the center unit and powered sub-woofer into an A C outlets, make sure that all connections ha ve been made. Plug the power cord into an AC outlet. The red ST ANDBY lamp on the center unit lights when the po wer cord is plugged in.
11 Par ts Identification Become familiar with the b uttons and controls on the unit before use. Refer to the pag es in parentheses for details. Center unit ——————————————.
12 Secondary remote control Primary remote control Parts Identification Remote controls —————————————————————————————————————.
13 Principles of operation The system may be operated via the remote control or the buttons on the center unit, or via the menu on the scr een. Operation with the remote control Select the appropriate mode for the remote control when using the primary or secondary remote control is used for operation.
14 Principles of operation T o operate via the on-screen menu When using the on-screen menu, first display it and then use the primary or secondary remote control unit cursor b uttons ( 2 / 3 / 5 / ∞ ), the number buttons, and the ENTER b utton.
15 On-screen menus —————————————— This system supports the follo wing on-screen men us. Opening screens On-screen menus for using and setting up the A V amp function On-scr.
16 The basic operations for this system are as follows. T o turn the system power supply ON and OFF (standby) From the remote controls: Press AUDIO to turn power ON. The ST ANDBY lamp goes of f, and the current source name (or station frequency) appears on the display windo w .
17 Muting the sound Primary remote control only: Press MUTING to mute the sound through all speakers connected. “MUTING” appears on the display window and v olume turns off. T o restore the sound, press MUTING again so that “OFF” appears on the display .
18 Selecting the analog or digital input mode When you hav e connected some components such as MD recorder , the DBS tuner and so on, using digital terminals (see page 9), you need to change the input mode for these components to the digital input. Y ou can choose digital sound from the following sources: “MD”, “DBS”, “ A UX”.
19 When a decode mode which differs from the type of disc being played is selected Insert a D VD disc in the center unit to display the type of audio being played in the Decode mode indicator in the display window . Audio cannot be played if a decode mode which differs from the displayed mode is selected.
20 The lamp display indicates the type of disc (D VD or CD) currently playing as follows. Example: With Dolby digital 5.1 ch, DTS digital 5.1 ch, or MPEG Multichannel 5.1 ch surround With Dolby digital (Lt/Rt*) With stereo sound (eg Audio CD) * Lt/Rt refers to the downmix output when connected to a de vice that uses Dolby Pro Logic.
21 DAP modes ————————————————— The sound heard in a concert hall or club consists of direct sound and indirect sound — early reflections and reflections from behind. Direct sounds reach the listener directly without any reflection.
22 and represent disc types. IMPORT ANT Check that the remote control mode selector is set to ON SCREEN MENU before using DVD. T o play a disc On the front panel: 1. Switch the TV and display video on from this system. Set the TV input to video 1 (or video 2 or video 3).
23 On-screen guide icons ———————————— During D VD playback, you may see icons displayed over the picture. These ha ve the following meanings. Displayed at the beginning of a scene recorded from multiple angles (see page 30). Displayed at the beginning of a scene recorded with multiple audio languages (see page 32).
24 On the front panel: Press ¢ or 4 . Press 4 to locate the beginning of the current chapter , title, or track, and press ¢ to locate the beginning of the ne xt chapter, title , or track.
25 Selecting the location to view from the video CD menu When playing back V ideo CDs recorded with PBC (playback control), a list of the recorded contents may appear on the TV screen as a menu. The loca tion to view ma y be conveniently called up fr om this menu screen.
26 T o play from the beginning of a title, chapter , or track The beginning of pre vious or later chapters or tracks may be skipped. 7 For D VD: During playback For Audio CD: Any time For V ideo CD: During playback without PBC function From the remote controls: 1.
27 1. Press DVD ON SCREEN. The on-screen display appears on the TV screen. 2. Use 5 / ∞ cursors to move the pointer to [TIME SEARCH], then press ENTER. The color of [TIME SEARCH] changes and “GO T O:” appears in the message area. (for DVD) (for Audio CD or Video CD) 3.
28 3. Press ENTER. The unit starts playback from the selected title, chapter or track. T o return to the regular display: Press DIGEST . Note: • W ith some discs, depending on the contents, it may take some time until all the scenes appear on the screen.
29 Zooming a scene [ZOOM] 7 During playback or while paused From primary remote control only: 1. Press ZOOM. “ZOOM” appears on the TV screen. The unit zooms in to the center part of the scene to produce a double-sided image. 2. Use 2 / 3 / 5 / ∞ cursors to move the zoomed-in scene.
30 Using the DVD player 2. Use 5 / ∞ cursors to move the pointer [SUBTITLE]. 3. Use 2 / 3 cursors to select the desired subtitle. Each time you press 2 / 3 cursors, the subtitle changes. Example: T o turn off the on-screen display Press D VD ON SCREEN.
31 Viewing from Multiple Angles [ANGLE] Y ou can enjoy a variety of scene angles if the D VD disc contains “multi-angle” parts, where multiple cameras were used to shoot the same scene from diff er ent angles. Y ou can select one of these viewing angles from the normal screen or on-screen display .
32 Using the DVD player Selecting the Picture Character [THEA TER POSITION] Y ou can select the quality of the image from among four options (OFF , 1, 2, and 3) according to the type of programming, picture tone or personal preferences. 7 During playback From the remote controls: 1.
33 T o quit repeat playback Move the pointer to [REPEA T] and press ENTER repeatedl y until the [REPEA T] display turns off. T u turn off the on-screen display Press D VD ON SCREEN. Notes: • Repeat play function cannot be used during Video CD playback with PBC function.
34 Using the DVD player (for Video CD) (for Audio CD) T ime display T ime display Programming the Playing Order of the T racks [PROGRAM] Y ou can play tracks on an Audio CD or V ideo CD in the desired order . 7 While stopped From primary remote control only: 1.
35 4. Press PLA Y to start program play . When all of the programmed tracks hav e finished playback, the unit stops but the pro gram remains. T o turn off the on-screen display Press D VD ON SCREEN. Quitting programmed playback Move the pointer to [PR OGRAM] and press ENTER.
36 Receiving radio br oadcasts Y ou can browse through all the stations or use the preset function to go immediately to a particular station. T uning in stations manually From the remote controls: 1. Press FM/AM to select the band. • Each time you press the button, the band alterna tes between FM and AM (MW).
37 T o tune in a preset station ——————————— From primary remote control: 1. Press FM/AM. • Eac h time you press the button, the band alternates between FM and AM (MW). 2. Press the number buttons (1~10, +10) to select a preset channel number .
38 Receiving radio broadcasts Using the RDS (Radio Data System) to receive FM stations RDS allows FM stations to send an additional signal along with their regular program signals. For e xample, the stations send their station names, as well as information about what type of program they broadcast, such as sports or music, etc.
39 Receiving radio broadcasts Switching to a broadcast program of your choice temporarily Another convenient RDS service is called “EON (Enhanced Other Network)”.
40 A V amplifier settings on-screen display The following menus are available from the on-screen A V Amp settings. MAIN MENU ———————————————— SOUND MENU —————.
41 Use the primary remote control to perform MAIN MENU settings. Buttons used ———————————————— MAIN ON SCREEN and the 2 / 3 / 5 / ∞ cursors. ON SCREEN LANGUAGE The on-screen language is the language used in the display for the MAIN MENU, SOUND MENU, SPEAKER MENU, and DVD MENU.
42 Changing the DECODE MODE (See page 18) This option is used to change the digital audio decode mode. The default setting of [AUTO/PCM] is recommended for regular use. When the playback source is DVD, you may select a DECODE MODE. 1. Open the MAIN MENU See page 41, “Opening the MAIN MENU”.
43 Use the primary remote control to perform SOUND MENU settings. Buttons used ———————————————— MAIN ON SCREEN and the 2 / 3 / 5 / ∞ cursors. Adjusting the balance Adjusting the front speaker balance. 1. Open the SOUND MENU.
44 Adjusting input signal (See page 19) When using the DSP mode effect during playback from an analog device, the sound will occasionally be distorted due to a overly- strong input signal. In these instances, it is possible to adjust the level of the input signal.
45 Use the primary remote control to perform speaker settings with the on-screen SPEAKER MENU. Buttons used ———————————————— MAIN ON SCREEN, the 2 / 3 / 5 / ∞ cursors, and ENTER. Opening the SPEAKER MENU 1. Stop DVD image playback on the TV screen.
46 SPEAKER MENU Settings Playing a test tone When you wish to play a test tone, make sure the sound mode is set to “SURROUND ON” or “THEA TER.” The test tone will not play in other modes. 1. Open the SPEAKER MENU. See page 45, “Opening the SPEAKER MENU”.
47 Setting speaker level 1. Open the SPEAKER MENU. See page 45, “Opening the SPEAKER MENU”. 2. Switch the speaker mode to EXPERT . 3. Move the pointer to the speaker selection box using the 5 / ∞ cursors. Use the 2 / 3 cursors to select SPEAKER LEVEL.
48 Use the primary or secondary remote control to perform DVD settings with the on-screen DVD MENU. Buttons used ———————————————— DVD ON SCREEN, and the 2 / 3 / 5 / ∞ cursors. DVD MENU Settings Opening the DVD MENU 1.
49 Choosing audio language Some DVD discs feature audio playback in multiple languages. W ith these discs, it is possible to set the default language for audio playback. 1. Open the DVD MENU. See page 48, “Opening the DVD MENU”. 2. Move the pointer to AUDIO LANGUAGE using the 5 / ∞ cursors.
50 DVD MENU Settings Select monitor type Most movie DVD discs are recorded for wide-screen TVs with a height/width ratio of 16:9. It is possible to optimize playback of these wide-screen TV images for viewing on a regular TV with a height/width ratio of 4:3.
51 Limiting playback by childr en 1 5 Country code This function restricts playback of DVD discs which contain violent (and other) scenes according to the level set by the user .
52 T o change the settings ———————————— 7 While a DVD disc is stopped or no disc is inserted 1. Press ENTER while holding down STOP . The Parental Lock on-screen display appears on the TV screen. 2. Enter your current 4-digit password using the number buttons (0 ~ 9) and press ENTER.
53 How to handle discs When handling a disc, do not touch the surface of the disc. Since discs are made of plastic, they are easily dama ged. If a disc gets dirty , dusty , scra tched or warped, the imagesand sound will not be picked up correctly , and such a discmay cause the player to malfunction.
54 The COMPU LINK remote control system allows you to operate JVC audio components through the remote sensor on the center unit. T o use this remote control system, you need to connect JVC audio components through the COMPU LINK-3 (SYNCHR O) jacks (see below) in addition to the connections using cables with RCA pin plugs (see pages 8 and 9).
55 Operating JVC’ s Audio/V ideo Components Y ou can operate JVC’ s audio and video components with this system’ s remote control, since control signals for JVC components ar e preset in the remote control.
56 Cassette deck ———————————————— After pressing T APE/MD or T APE/MD CONTR OL, you can perform the following operations on a cassette deck: PLA Y : Starts playing. 1 : Fast winds the tape from r ight to left. ¡ : Fast winds the tape from left to right.
57 This primary remote control can transmit control signals for other manufacturers’ VCRs and TVs. By changing the transmittable signals from preset ones to the other manufacturers’, you can operate the other manufacturer’ s components using this remote control.
58 T o change the transmittable signals for operating another manufacturer’ s VCR —————————— 1. Press and hold VCR. 2. Press VCR. 3. Enter manufacturer’ s code (two digits) using buttons 1 ~ 9, and 0. See the list on page 58 to find the code.
59 T r oubleshooting Use this chart to help you solvi daily operational problems. If there is anyproblem y ou cannot solve, conect your JVC service center . PROBLEM Power does not come on. Power is not supplied to the po wered sub-woofer The remote control does not work.
60 Specifications Center unit (XV-THA10R) Audio section Dynamic Range 97 dB T otal Harmonic Distortion 0.007% Output Lev el 2.0 V RMS Video section Horizontal Resolution 500 lines Signal-to-Noise Ratio 60 dB Output Lev el S-video-Y : 1.0 V(p-p)/75 Ω S-video-C: 0.
61 Appendix A: T able of languages and their abbreviations When you select the subtitle language or sound, the languages shown below are displayed as abbreviations. T o select the desired language, select the abbreviation corresponding the language you want to.
62 AD Andorra AE United Arab Emirates AF Afghanistan AG Antigua and Barbuda AI Anguilla AL Albania AM Armenia AN Netherlands Antilles AO Angola AQ Antarctica AR Argentina AS American Samoa AT Austria .
63 LI Liechtenstein LK Sri Lanka LR Liberia LS Lesotho LT Lithuania LU Luxembourg LV Latvia LY Libyan Arab Jamahiriya MA Morocco MC Monaco MD Moldova, Republic of MG Madagascar MH Marshall Islands ML .
VICTOR COMP ANY OF JAP AN , LIMITED EN J V C 0600TNMNATJSC SAFETY INSTRUCTIONS “SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT” This equipment has been disigned and manuf actured to meet inter national safety standards b ut, like any electrical equipment, care must be tak en if you are to obtain the best results and safety is to be assured.
Ein wichtiger Punkt beim Kauf des Geräts JVC TH-A10R (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC TH-A10R noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC TH-A10R - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC TH-A10R reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC TH-A10R erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC TH-A10R besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC TH-A10R verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC TH-A10R. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC TH-A10R gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
