Benutzeranleitung / Produktwartung SP-MXJ300 des Produzenten JVC
Zur Seite of 32
For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear , bottom or side of the cabinet. Retain this information for future reference.
– G-1 – W arnings, Cautions and Others Mises en garde, précautions et indications diverses CAUTION T o reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture.
– G-2 – For Canada/pour le Canada CA UTION: TO PREVENT ELECTRIC SHOCK, MA TCH WIDE BLADE OF PLUG TO WIDE SLOT , FULL Y INSERT . A TTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQUAU FOND.
– 1 – English Introduction About This Manual This manual is organized as follows: • The manual mainly explains operations using the b uttons and controls on the unit. Y ou can also use the b uttons on the remote control if they ha ve the same or similar names (or marks) as those on the unit.
– 2 – English Contents Location of the Buttons and Controls ....................... 3 CA-MXJ300 Front Panel ........................................... 4 CA-MXJ206/CA-MXJ200 Front Panel ..................... 6 Remote Control ......................
– 3 – English 1 2 4 3 5 6 7 8 p 9 q w e r t u y CD 3 CD 2 CD 1 STANDBY VOLUME CD 1 CD 2 CD 3 PLA Y & EXCHANGER FM /AM CD PLA Y REC/PLA Y A UTO REVERSE EJECT COMPACT DIGITAL AUDIO T APE COMPU P.
– 4 – English See pages in the parentheses for details. CA-MXJ300 Front Panel 1 Disc trays 2 POWER button and ST ANDBY lamp (12) 3 Display window 4 Remote sensor 5 P ANEL OPEN/CLOSE button (1 1) Pr essing this button also turns on the unit. 6 PHONES jack (12) 7 T APE 2 3 button and lamp (19) Pr essing this button also turns on the unit.
– 5 – English o ; a c x 1 2 4 3 u y POWER s d / 6 9 q w r i f 7 5 REC STAR T/STOP CLOCK/TIMER DISPLAY SET CANCEL DEMO DUBBING CD REC STAR T PROGRAM RANDOM REPEAT – PRESET + – TUNING + REVERSE MODE TAPE A/B SOUND MODE ACTIVE BASS EX.
– 6 – English See pages in the parentheses for details. CA-MXJ206/CA-MXJ200 Front Panel 1 Disc trays 2 POWER button and ST ANDBY lamp (12) 3 Display window 4 Remote sensor 5 SET button (11, 22) 6 .
– 7 – English When using the remote control, point it at the remote sensor on the front panel. Remote Control a 3 t y u o ; s d f l h 4 5 6 7 w e r i 1 2 g 8 9 p q j k 1 /CLEAR C D TAPE CLOCK TIME.
– 8 – English ANTENNA FM AM LOOP FM 75 GND GND AM EXT 2 3 1 23 1 Getting Started Unpacking After unpacking, check to be sure that you have all the following items.
– 9 – English CAUTION: SPEAKER IMPEDANCE 6 ~ 16 OHMS SPEAKERS RIGHT LEFT 23 1 1 Connect the AM loop antenna to the AM LOOP terminals as illustrated.
– 10 – English AUX IN RIGHT LEFT SPEAKERS RIGHT LEFT ANTENNA FM AM LOOP FM 75 GND GND AM EXT CAUTION: SPEAKER IMPEDANCE 6 ~ 16 OHMS Connecting Other Equipment Y ou can connect an audio equipment — used only as a playback device. When you connect and use this equipment, refer also to its manual.
– 11 – English Common Operations Setting the Clock Before operating the unit any further , first set the clock built in this unit. For MX-J300 only Pr ess P ANEL OPEN/CLOSE. The unit is turned on and the Powered Rolling Panel opens automatically .
– 12 – English Adjusting the V olume Y ou can adjust the volume level only while the unit is turned on. T urn VOLUME clockwise to increase the volume or counterclockwise to decrease it. When using the remote control, press VOLUME + to increase the volume or press VOLUME – to decrease it.
– 13 – English Reinforcing the Bass Sound The richness and fullness of the bass sound is maintained regardless of how low you set the volume. Y ou can use this effect only for playback. T o get the effect, press ACTIVE BASS EX. The BASS indicator also lights up on the display .
– 14 – English Listening to FM and AM Broadcasts T uning in a Station On the unit ONL Y : 1 Press FM/AM. The unit automatically turns on and tunes in the previously tuned station (either FM or AM). (For MX-J300 only , the Powered Rolling Panel automatically opens.
– 15 – English Playing Back CDs Loading CDs 1 Pr ess 0 for the disc tray (CD 1 to 3) y ou want to load a CD onto. The unit automatically turns on and the disc tray comes out. (For MX-J300 only , the Powered Rolling Panel also opens automatically .
– 16 – English T o locate a particular point in a track During play , press and hold 4 or ¢ . • 4 : Fast reverses the disc. • ¢ : Fast forwards the disc. T o go to another track Press 4 or ¢ repeatedly before or during playback. • 4 : Goes back to the beginning of the current or previous tracks.
– 17 – English T o stop during play , press 7 on the unit (or CD 7 /CLEAR on the remote control). T o exit from program play mode On the unit: Press PROGRAM again before or after play so that the unit enters Continuous play mode. On the remote contr ol: Press PLA Y MODE repeatedly until all the CD play mode indicator go off from the display .
– 18 – English REPEA T REPEAT ALL REPEAT 1CD REPEAT 1 Canceled (Continuous play) Repeating T racks or CDs — Repeat Play Y ou can have all the CDs, the program or the individual track currently playing repeat as many times as you like. T o repeat play , press REPEA T during or before playing.
– 19 – English 0 EJECT 0 EJECT This unit provides two types of cassette deck: Deck A for one-way playing only and deck B for Reverse Mode playing as well as one-way playing. Y ou can play back only type I tapes. Playing Back a T ape 1 Pr ess EJECT ( 0 ) for the deck y ou want to use.
– 20 – English Recording Recording T apes on Deck B 1 Press EJECT 0 f or the deck B. 2 Put in a recordab le cassette, with the exposed part of the tape down. 3 Close the cassette holder gently . 4 Check the tape direction of deck B. • If the tape direction is not correct, press T APE 2 3 twice then 7 to change the tape direction.
– 21 – English CD Direct Recording Everything on the CD goes onto the tape in the order it is on the CD, or according to the order you have made for Program play . 1 Put a recorda ble cassette into deck B. 2 Place a disc correctl y on the circle of the disc tray , with its label side up.
– 22 – English Using the T imers – PRESET + – PRESET + – PRESET + SET SET DAILY Canceled ON TIME ON TIME Clock setting (See page 11.) REC CLOCK/TIMER CLOCK/TIMER – CD – – – TUNER FM TUNER AM TAPE AUX There are three timers available — Recording T imer , Daily T imer , and Sleep T imer .
– 23 – English ST ANDBY POWER CLOCK/TIMER CANCEL DEMO SET SET 6 When selecting “– CD – – –” 1) Press 4 or ¢ to select the disc number , then press SET . 2) Press 4 or ¢ to set the track number , then press SET . The unit enters volume setting mode.
– 24 – English 6 Pr ess SELECT – or SELECT + to select the sour ce to play , then press SET . • Each time you press SELECT – or SELECT +, the source changes as follows: TUNER FM : tunes into a specified preset FM station. = go to step 7. TUNER AM : tunes into a specified preset AM station.
– 25 – English ST ANDBY POWER – PRESET + SET CLOCK/TIMER CANCEL DEMO SET 4 Set the on-time y ou want the unit to turn on. 1) Press 4 or ¢ to set the hour , then press SET . 2) Press 4 or ¢ to set the minute, then press SET . “OFF TIME” appears for 2 seconds, then the unit enters of f-time setting mode.
– 26 – English 7 Select the pr eset station. 1) Press SELECT – or SELECT + to select the band (“TUNER FM” or “TUNER AM”), then press SET . 2) Press SELECT – or SELECT + to select a preset channel number , then press SET . The REC indicator stops flashing and remains lit.
– 27 – English Maintenance T o get the best performance of the unit, keep your discs, tapes, and mechanism clean. Handling cassette tapes • If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating.
– 28 – English If you are having a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer , for service.
VICTOR COMP ANY OF JAP AN , LIMITED 0200KSMMDWHIT EN, FR J V C MX-J300/206/200[C] COVER 00.4.10, 2:34 PM 2.
Ein wichtiger Punkt beim Kauf des Geräts JVC SP-MXJ300 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC SP-MXJ300 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC SP-MXJ300 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC SP-MXJ300 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC SP-MXJ300 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC SP-MXJ300 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC SP-MXJ300 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC SP-MXJ300. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC SP-MXJ300 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
