Benutzeranleitung / Produktwartung SP-FSH100 des Produzenten JVC
Zur Seite of 28
LVT1109-001B [J] INSTR UCTIONS COMP A CT COMPONENT SYSTEM FS-H100 –Consists of CA-FSH100 and SP-FSH100 For Customer Use: Enter below the Model No . and Serial No. which are located either on the rear , bot- tom or side of the cabinet. Retain this inf or mation f or future reference .
G-1 W arnings, Cautions and Other s CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
1 Contents Introduction ....................................................................... 2 Location of the Buttons and Controls ............................. 3 Main Unit ..........................................................................
2 Power sources • When unplugging the unit from the wall outlet, al ways pull on the plug, not the AC po wer cord. DO NO T handle the A C power cord with wet hands. Moisture condensation Moisture may condense on the lenses inside the unit in the follo wing cases: • After starting to heat the room.
3 Location of the Buttons and Controls Become familiar with the b uttons and controls on your unit. Main Unit OPEN COMPACT DIGITAL AUDIO 1 2 COMPACT DIGITAL AUDIO ST ANDBY CD PHONES DOWN 4 # / 8 7¢ T.
4 Display window Display window 1 SLEEP indicator 2 (timer) indicator 3 T imer number indicator 4 MP3 indicator 5 Repeat indicators • , ALL 6 PRGM (program) indicator 7 RANDOM indicator 8 FM mode indicators • MONO , ST (stereo) 9 REC indicator p SOUND indicator q Main display See pages in parentheses for details.
5 Remote Control See pages in parentheses for details. COMPACT DIGITAL AUDIO ST ANDBY CD PHONES DOWN 4 # / 8 7¢ TIMER UP AUX T APE FM/AM AUX VOLUME + – When using the remote control, point it at the remote sensor on the front panel.
6 Getting Started Unpacking After unpacking, check to be sure that you ha ve all the follo wing items. The number in parentheses indicates the quantity of each piece supplied. • AM loop antenna (1) • Remote control (1) • Batteries (2) If any item is missing, consult your dealer immediately .
7 T o connect AM and FM antennas 1 Connect the supplied AM loop antenna to the AM LOOP terminal. Place the antenna aw ay from the unit and adjust its position for the best reception.
8 Basic and Common Operations Setting the Clock Before operating the unit any further , f irst set the unit ’ s c lock. When you plug in the po wer cord, “ AM12:00 ” starts flashing on the display . Y ou can set the clock when the unit is either turned on or in standby mode.
9 Selecting the Source T o select the source, press CD 6 , T APE, FM/AM, or A UX. • When you select CD as the source, playback starts automatically . T o operate the tuner (FM or AM), see pages 10 and 11. T o operate the CD player , see pages 12 to 14.
10 On the r emote control ONL Y : 1 T une in to the station y ou want to preset. • See “ T uning in to a Station ” on the left column. 2 Press PLA Y MODE. The preset number starts flashing on the display . • The PRGM (program) indicator lights up on the display .
11 T uning in to a Preset Station On the r emote control ONL Y : 1 Pr ess FM/AM to select either “ FM ” or “ AM. ” The unit automatically turns on and tunes in to the previously recei v ed station — either FM or AM. • Each time you press the button, the band alternates between FM and AM.
12 2 Place a disc corr ectly with its label side up, then press do wn on the portions ar ound the disc ’ s center hole until you hear a c lick. 3 Close the disc cov er gently . 4 Press CD 6 . The unit automatically turns on and the source changes to the CD player .
13 Basic Disc Operations While playing a disc, you can do the follo wing operations. T o stop playing for a moment During play , press CD 3 / 8 . While pausing, the elapsed playing time flashes on the display . T o resume playing, press CD 3 / 8 ag ain.
14 Playing at Random — Random Play Y ou can play the tracks at random. On the r emote control ONL Y : Press PLA Y MODE during playing. The RANDOM indicator lights up on the display . T o exit from Random Play , press PLA Y MODE again. The RANDOM indicator goes of f.
15 4 Press T APE. The unit automatically turns on and the source changes to the tape deck. • Y ou can select to the tape by pressing T APE on the remote control. 5 Press # (play). The tape starts playing. • When the end of the tape is reached, playing stops.
16 Listening to the External Equipment Y ou can listen to the e xternal equipment such as MD recorder , cassette deck, or other auxiliary . • First, make sure that the e xternal equipment is properly connected to the unit. (See page 7.) 1 Set the volume le vel to the minimum position.
17 IMPORT ANT : • It should be noted that it may be unlawful to re-r ecord pr e-recorded tapes, r ecords, or discs without the consent of the owner of copyright in the sound or video recording , broadcast or cable pr ogram and in any literary , dramatic, musical, or artistic embodied therein.
18 Y ou cannot press ‡ (r ecording) in the following cases: • If no cassette is inserted. • If a protected cassette is inserted. T o stop recording f or a moment, press * . The recording is paused, but the CD pla yback does not stop. T o r esume recording, press * again.
19 3 Press SET to set the on-time y ou want the unit to tur n on. The hour indication starts flashing on the display . (1) Press ¢ or 4 to set the hour , then press SET . (2) Press ¢ or 4 to set the minute, then press SET . If you want to change the time setting, press CANCEL.
20 T o deactivate the timer temporarily , (1) Press CLOCK/TIMER repeatedly to select the T imer Number indicator to cancel. The on-time appears and the T imer Number indicator begins to b link. (2) Press CANCEL. The Timer Number indicator disappears and the display returns to the normal indication.
21 Maintenance T o get the best perfor mance of the unit, keep your discs, tapes and mechanism clean. General Notes In general, you will hav e the best performance by keeping your discs, tapes and the mechanism clean. • Store discs and tapes in their cases, and keep them in cabinets or on shelves.
22 If you are ha ving a problem with your unit, check this list for a possible solution before calling for ser vice. If you cannot solve the problem from the hints gi ven here, or the unit has been ph ysically damaged, call a qualified person, such as your dealer , for service.
23 Amplifier Section — CA-FSH100 Output P ower: 12.5 W per channel, min. RMS, driv en into 6 Ω at 1 kHz with no mor e than 10% total harmonic distortion.
THIS LIMITED W ARRANTY IS V ALID ONL Y IN THE FIFTY (50) UNITED ST A TES, THE DISTRICT OF COLUMBIA AND IN COMMONWEAL TH OF PUERTO RICO. WHA T WE WILL DO: If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner .
BT -51001-5 (0301) QUALITY SER VICE HOW TO LOCA TE YOUR JVC SER VICE CENTER Dear Customer , In order to receive the most satisfaction from your purchase,please read the instruction booklet before operating the unit.
VICTOR COMP ANY OF JAP AN , LIMITED EN 0204AIMMDWBET © 2004 VICTOR COMPANY OF JAPAN, LIMITED FS-H100 COMPACT COMPONENT SYSTEM FS-H100[J]cover2.p65 04.
Ein wichtiger Punkt beim Kauf des Geräts JVC SP-FSH100 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC SP-FSH100 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC SP-FSH100 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC SP-FSH100 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC SP-FSH100 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC SP-FSH100 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC SP-FSH100 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC SP-FSH100. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC SP-FSH100 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
