Benutzeranleitung / Produktwartung MX-J270V des Produzenten JVC
Zur Seite of 36
COMP A CT COMPONENT SYSTEM MX-J270V Consists of CA-MXJ270V and SP-MXJ270V For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear , bottom or side of the cabinet. Retain this information for future reference. Model No.
Caution –– switch! Disconnect the mains plug to shut the power off com- pletely. The switch in any position does not discon- nect the mains line. The power can be remote controlled. Precaución –– Interruptor ! Desconectar el cable de alimentación para desactivar la alimentación totalmente.
CAUTION T o reduce the risk of electrical shocks, fire, etc.: 1. Do not remov e screws, co vers or cabinet. 2. Do not expose this appliance to r ain or moisture. PRECAUCIÓN P ara reducir riesgos de choques eléctricos, incendio , etc.: 1. No extr aiga los tor nillos, los cubier tas ni la caja.
Caution: Proper V entilation T o a void risk of electric shock and fire, and to pre vent damage , locate the apparatus as f ollows: 1 Front: No obstructions and open spacing. 2 Sides/ T op/ Back: No obstructions should be placed in the areas shown by the dimensions belo w .
IMPORTANT FOR LASER PRODUCTS / IMPORTANTE PARA PRODUCTOS LÁSER / IMPOTANTE PARA PRODUTOS LASER / / REPRODUCTION OF LABELS / REPRODUCCIÓN DE ETIQUETAS / REPRODUÇÃO DE ETIQUETAS / 1 CLASSIFICATION L.
– 1 – English Introduction About This Manual This manual is org anized as follows: • The manual mainly explains operations using the b uttons and controls on the unit. Y ou can also use the b uttons on the remote control if they ha ve the same or similar names (or marks) as those on the unit.
– 2 – English Contents Location of the Buttons and Contr ols ....................... 3 Front Panel ................................................................. 4 Remote Control .......................................................... 5 Getting Started .
– 3 – English s d f 1 2 4 3 y u g h c 6 9 q w r i j 7 5 t e p 8 o CD CD CD ST ANDBY VOLUME CD CD CD FM /AM CD PLA Y REC/PLA Y A UTO REVERSE T APE MIC LEVEL 1 BIT DUAL D/A CONVER TER AUX PHONES.
– 4 – English See pages in the parentheses for details. Front Panel 1 Disc trays 2 (standby/on) button and ST ANDBY lamp (9) 3 Display windo w 4 Remote sensor 5 KEY CONTR OL I button (24) 6 MPX/V .
– 5 – English When using the remote control, point it at the remote sensor on the front panel. Remote Control CD CD CD STANDBY VOLUME CD CD CD FM /AM CD PLAY REC/PLAY AUT O REVERSE TAPE MIC LEVEL .
– 6 – English ANTENNA FM AM LOOP FM 75 GND GND AM EXT 2 1 3 Getting Started Unpacking After unpacking, check to be sure that you ha ve all the follo wing items.
– 7 – English RIGHT LEFT CAUTION: SPEAKER IMPEDANCE 6 ~ 16 OHMS SPEAKERS 34 2 1 3 2 ANTENNA FM AM LOOP FM 75 GND GND AM EXT 1 AM antenna Connecting Speakers Y ou can connect a pair of the front speakers.
– 8 – English Connecting Other Equipment Y ou can connect ordinary audio equipment as well as audio- visual equipment. When connecting VCR, you can record V ideo CDs program easily . When you connect and use this equipment, refer also to its manual.
– 9 – English Common Operations Setting the Clock Before operating the unit any further , first set the clock b uilt in this unit. • As you plug in the A C power cord, the clock starts counting from “0:00. ” On the r emote control ONL Y : 1 Pr ess and hold SHIFT during the setting pr ocedure.
– 10 – English Adjusting the V olume Y ou can adjust the v olume level only while the unit is tur ned on. T urn V OLUME clockwise to increase the v olume or counterclockwise to decrease it. When using the remote control, press VOLUME + to increase the v olume or press V OLUME – to decrease it.
– 11 – English Listening to FM and AM Broadcasts T uning in a Station 1 Press FM/AM. The unit automatically turns on and tunes in the previously tuned station (either FM or AM). • Each time you press the button, the band alternates between FM and AM.
– 12 – English Playing Back CDs Loading CDs 1 Pr ess 0 for the disc tray (CD 1 to CD 3) y ou want to load a CD onto. The unit automatically turns on and the disc tray comes out. 2 Place a disc correctl y on the circle of the disc tray , with its label side up.
– 13 – English T o locate a particular point in a track During play , press and hold 4 or ¢ . • 4 : Fast re verses the disc. • ¢ : Fast forw ards the disc. T o go to another track Press 4 or ¢ repeatedly before or during playback. • 4 : Goes back to the beginning of the current or previous tracks.
– 14 – English T o stop during play , press 7 on the unit (or CD 7 on the remote control). T o exit from pro gram play mode Press PLA Y MODE on the remote control repeatedly until all the CD play mode indicator goes of f from the display . • The program you ha ve made is stored in memory until you erase the program.
– 15 – English REPEA T Repeating T racks or CDs — Repeat Play Y ou can hav e all the CDs, the program or the indi vidual track currently playing repeat as many times as you like. T o repeat play , press REPEA T during or before playing. T o use Repeat play for Program play and Random play , press the button after starting playback.
– 16 – English Special Plays for Video CDs Y ou can use the follo wing special plays for video CDs both with and without PBC function. T o play Still- and Frame-by-Frame pictures Press 8 STILL on the remote control during playback. When you press the b utton, playback pauses and a still picture is shown on the TV screen.
– 17 – English CD 6 6 6 6 6 SELECT When “SELECT XX” appears on the TV screen, pressing this button jumps to the selected picture or program. (retur n) Press the button once, r eturn to the previous menu or screen. 7 7 7 7 7 (stop) Press and hold the button for a fe w seconds, quit the operation of the video CDs.
– 18 – English T o play Video CDs without Using Menu Screen Y ou can cancel the PBC function and play the disc without using menu screen. 1 T urn on the TV and select the video input so that y ou can view the pictures fr om the Unit. Refer also to the manual supplied for your TV .
– 19 – English Y ou can play back type I, type II and type IV tapes without changing any settings. Playing Back a T ape 1 Pr ess EJECT ( 0 ) for the deck y ou want to use. 2 Put a cassette in, with the exposed part of the tape down. 3 Close the cassette holder gently .
– 20 – English T o find the beginning of the next song During play , press 4 / ¢ ( 1 or ¡ on the remote control) in the same direction as the tape play . The tape direction indicator of the same direction as the tape play starts flashing slo wly and quickly alternately .
– 21 – English Recording Recording T apes on Deck B 1 Press EJECT 0 f or the deck B. 2 Put in a recordab le cassette, with the exposed part of the tape down.
– 22 – English T o record on both sides — Reverse Mode Press REVERSE MODE so that the Re verse Mode indicator lights up as — . T o cancel Reverse Mode, press the button ag ain so that the Rev erse Mode indicator lights up as — .
– 23 – English Using the Microphone Y ou can enjoy singing along (Karaoke) and micr ophone mixing. IMPORT ANT : • Always set MIC LEVEL to MIN when connecting or disconnecting the microphone. • When you do not use the microphone, keep the microphones unconnected.
– 24 – English Microphone Mixing When you sing along with multiplex tapes or CDs, f ollow the procedure below: On the unit ONL Y : 1 Rotate MIC LEVEL to MIN. 2 Connect the microphone (not supplied) b y plugging it into the MIC jack. 3 Start playing the source — CD, tape or other connected component.
– 25 – English Using the T imers There are three timers a vailable — Daily Timer , Recording T imer , and Sleep T imer . Before using the timers, you need to set the clock built in the unit. (See page 9.) Using the Daily and Recording Timer Y ou can set the timer whether the unit is turned on or turned of f.
– 26 – English 7 Pr ess SELECT – or SELECT + to select the sour ce to play . • Each time you press SELECT – or SELECT +, the source changes as follo ws: TUNER : tunes into the last station you were listening to. TUNER REC *: records the last station you were listening to.
– 27 – English Recording Timer 7:00 6:30 Sleep Timer 7:30 does not work. Recording Timer 7:30 7:00 6:30 Daily Timer 6:00 T imer Priority Since each timer can be set separately , you may wonder what happens if the setting for these timers ov erlaps.
– 28 – English Maintenance T o get the best performance of the unit, keep your discs, tapes, and mechanism clean. Handling cassette tapes • If the tape is loose in its cassette, tak e up the slack by inserting a pencil in one of the reels and rotating.
– 29 – English If you are ha ving a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints gi ven here, or the unit has been physicall y damaged, call a qualified person, such as your dealer , for service.
– 30 – English Specifications Design and specifica tions are subject to chang e without notice. Amplifier — CA-MXJ270V Output Po wer: 40 W per channel, min. RMS, both channels dri ven into 6 Ω at 1 kHz with no more than 10 % total harmonic distortion Audio input sensiti vity/Impedance (at 1 kHz) A UX: 300 mV/50 k Ω MIC : 2.
AUX IN RIGHT LEFT RIGHT LEFT ANTENNA FM AM LOOP FM 75 GND GND AM EXT CAUTION: SPEAKER IMPEDANCE 6 ~ 16 OHMS LINE VOLTS 110V 127V 220V 230V -240V VIDEO OUT SPEAKERS AUX OUT LINE VOLTS 110V 127V 220V 230V -240V Mains (AC) Line Instruction (not applicable for Europe, U.
Ein wichtiger Punkt beim Kauf des Geräts JVC MX-J270V (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC MX-J270V noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC MX-J270V - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC MX-J270V reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC MX-J270V erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC MX-J270V besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC MX-J270V verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC MX-J270V. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC MX-J270V gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
