Benutzeranleitung / Produktwartung MX-J100 des Produzenten JVC
Zur Seite of 28
For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear , bottom or side of the cabinet. Retain this information for future reference.
Caution –– switch! Disconnect the mains plug to shut the power off com- pletely. The switch in any position does not discon- nect the mains line. The power can be remote controlled. Precaución –– Interruptor ! Desconectar el cable de alimentación para desactivar la alimentación totalmente.
CAUTION T o reduce the risk of electr ical shocks , fire, etc.: 1. Do not remov e screws, co vers or cabinet. 2. Do not expose this appliance to r ain or moisture. PRECAUCIÓN P ara reducir riesgos de choques eléctricos, incendio , etc.: 1. No extr aiga los tor nillos, los cubier tas ni la caja.
Caution: Proper V entilation T o av oid risk of electr ic shock and fire, and to pre vent damage , locate the apparatus as f ollows: 1 Front: No obstructions and open spacing. 2 Sides/ T op/ Back: No obstructions should be placed in the areas shown by the dimensions belo w .
IMPORTANT FOR LASER PRODUCTS / IMPORTANTE PARA PRODUCTOS LÁSER / IMPOTANTE PARA PRODUTOS LASER / / REPRODUCTION OF LABELS / REPRODUCCIÓN DE ETIQUETAS / REPRODUÇÃO DE ETIQUETAS / 1 CLASSIFICATION L.
– 1 – English Introduction About This Manual This manual is org anized as follows: • The manual mainly explains operations using the b uttons and controls on the unit. Y ou can also use the b uttons on the remote control if they ha ve the same or similar names (or marks) as those on the unit.
– 2 – English Contents Location of the Buttons and Controls ....................... 3 Front Panel ................................................................. 4 Remote Control .......................................................... 5 Getting Started .
– 3 – English Location of the Buttons and Controls Become familiar with the b uttons and controls on your unit. OPEN / CLOSE ST ANDBY DISC CHANGE COMPACT DIGITAL AUDIO VOLUME PLA Y REC/PLA Y CD SYNCHRO RECORDING EJECT EJECT PROGRAM/SET COUNTER RESET ACTIVE BASS EX.
– 4 – English See pages in the parentheses for details. Front Panel 1 Carousel 2 (standby/on) button and ST ANDBY lamp (9) 3 Display windo w 4 CLOCK/TIMER button (9, 16) 5 COUNTER RESET button (15) DEMO button (8) 6 SOUND MODE button (10) 7 A CTIVE B ASS EX.
– 5 – English Remote Control Remote Control 1 (standby/on) button (9) 2 PR OGRAM/SET button (9) 3 REPEA T button (12) 4 V .MASKING button (16) 5 T APE A/ B button (14) 6 CD 38 button (12) Pr essing this button also turns on the unit. 7 T APE 3 button (14, 15) Pr essing this button also turns on the unit.
– 6 – English Getting Started Unpacking After unpacking, check to be sure that you ha ve all the follo wing items. The number in the parentheses indicates the quantity of the pieces supplied.
– 7 – English SPEAKERS IMPEDANCE 6-16 OHMS. + + – – R L 1 Connect the AM loop antenna to the AM ANT terminal as illustrated. 2 T urn the AM loop antenna until you ha ve the best r eception. For better r eception of both FM and AM • Make sure the antenna conductors do not touch any other terminals and connecting cords.
– 8 – English FM 75 COAXIAL AM ANT AUX SPEAKERS IMPEDANCE 6-16 OHMS R + L I N + – – R L 110V- 127V 220V- 240V Connecting Other Equipment Y ou can connect an audio equipment — used only as a playback de vice. When you connect and use this equipment, refer also to its manual.
– 9 – English Common Operations Setting the Clock Before operating the unit any further , first set the clock b uilt in this unit. • T here is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
– 10 – English Reinforcing the Bass Sound The richness and fullness of the bass sound is maintained regardless of ho w low you set the v olume. Y ou can use this eff ect only for playback. T o get the effect, press A CTIVE BASS EX. so that the B ASS indicator appears on the display .
– 11 – English Listening to FM and AM Broadcasts T uning in a Station 1 Pr ess FM/AM. The unit automatically turns on and tunes in the previously tuned sta tion (either FM or AM). • Each time you press the button, the band alternates between FM and AM.
– 12 – English Loading CDs 1 Pr ess OPEN/CLOSE 0 on the unit. The unit automatically turns on and the carousel comes out. 2 Place one or two discs corr ectly on the front slots of the car ousel, with its label side up. • When using a CD single (8 cm), place it on the inner circle of the disc tray .
– 13 – English Basic CD Operations While playing a CD, you can do the follo wing operations. T o exchange CDs during playback of another Press DISC CHANGE to eject and exchange the CD. T o locate a particular point in a track During play , press and hold 1 or ¡ .
– 14 – English Playing Back a T ape 1 Pr ess EJECT ( 0 ) for the deck y ou want to use. 2 Put a cassette in, with the exposed part of the tape down. • Y ou can play bac k only the type I tapes. 3 Close the cassette holder gently . If you put cassettes in both decks A and B, the deck which you hav e put a cassette into last is selected.
– 15 – English Recording Resetting the T ape Counter If you wish to take a note on the counter v alue at the beginning of each track, reset the counter before starting a recording. Press COUNTER RESET on the unit to reset the counter . The counter reading becomes “0000.
– 16 – English Using the Microphone Y ou can enjoy singing along and microphone mixing. • T he MIC LEVEL control adjustment is valid for microphone connected to the MIC jack. IMPORT ANT : • Always set MIC LEVEL to MIN when connecting or disconnecting the microphone.
– 17 – English Using the T imers There are three timers a vailable — Recording Timer , Daily T imer , and Sleep T imer . Before using the timers, you need to set the clock built in the unit. (See page 9.) Using Daily Timer W ith Daily T imer, you can wak e to your fav orite music or radio program.
– 18 – English 7 When selecting “FM” or “AM. ” Press 4 or ¢ to select the preset station number , then press PR OGRAM/SET . The unit enters recording timer setting mode. If you want to continue the Recording T imer setting, go to step 3 of the Recording T imer setting procedure.
– 19 – English Using Sleep T imer W ith Sleep T imer , you can fall asleep to music. Y ou can set Sleep T imer when the unit is operating. How Sleep Timer actually works The unit automatically turns of f after the specified time length passes by .
– 20 – English Handling cassette tapes • If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating. • If the tape is loose, it may get stretched, cut, or caught in the cassette. • Be careful not to touch the tape surface.
– 21 – English If you are ha ving a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints gi ven here, or the unit has been physicall y damaged, call a qualified person, such as your dealer , for service.
– 22 – English Specifications Design and specifications are subject to change without notice. Amplifier — CA-MXJ100 Output Po wer: 40 W per channel, min. RMS, both channels driven into 6 Ω at 1 kHz with no more than 10 % total harmonic distortion Audio input sensitivity/Impedance (a t 1 kHz) A UX: 400 mV/50 k Ω MIC : 2.
FM 75 COAXIAL AM ANT AUX SPEAKERS IMPEDANCE 6-16 OHMS R + L I N + – – R L 110V- 127V 220V- 240V 110V- 127V 220V- 240V Mains (AC) Line Instruction (not applicable for Europe, U.S.A., Canada, Australia, and U.K.) Instrucción sobre la línea de la red (CA) (no aplicable para Europa, EE.
Ein wichtiger Punkt beim Kauf des Geräts JVC MX-J100 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC MX-J100 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC MX-J100 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC MX-J100 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC MX-J100 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC MX-J100 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC MX-J100 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC MX-J100. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC MX-J100 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
