Benutzeranleitung / Produktwartung LVT0282-002A des Produzenten JVC
Zur Seite of 24
RC - BX25BK RC - BX15BK / BU CD PORTABLE SYSTEM SISTEMA PORTATIL CON CD SISTEMA PORTATILE A CD RC-BX25BK/RC-BX15BK/BU CD PORTABLE SYSTEM MANUAL DE INSTRUCCIONES MANUALE DI ISTRUZIONI INSTRUCTIONS RC-B.
2 ENGLISH Thank you for purchasing this JVC product. Please read these instructions carefully before starting operation to be sure to obtain optimum performance and a longer service life from the unit. CONTENTS Features ...............................
3 IMPORT ANT FOR LASER PRODUCTS PRECAUTIONS 1. CLASS 1 LASER PRODUCT 2. DANGER: Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 3. CAUTION: Do not open the rear cover . There are no user serviceable parts inside the unit; leave all servicing to qualified serv- ice personnel.
4 FEA TURES 1. Portable system incorporating CD player • 16-key remote control unit operates the usual CD functions. (RC-BX25 only) • CD player with repeat play function us- ing the remote control unit.
5 HANDLING PRECAUTIONS Do not use this unit in direct sunlight or leave the unit in closed automobiles (or yachts, etc.) where it would be exposed to high tempera- tures above 40°C. 1. A void installing in the following places. • Where it could be subject to vibrations.
6 8. Cleaning the cabinet If the cabinet gets dirty , wipe it with a soft, dry cloth. Never use benzine or thinner as these could damage the surface finish. 9. When listening with headphones • Do not listen at high volumes as it could damage your hearing.
7 Checking batteries When the tape speed or output sound de- creases, or CD playback is intermittent, replace all batteries with fresh ones. When making an important recording, use new batteries (preferably alkaline batteries with a longer service life) to avoid any possible failure.
NAMES OF P ARTS AND THEIR FUNCTIONS • Front and T op panels 1 BASS BOOST switch _ ON: Set to this position to listen to Bass boost sound. — OFF: Set to this position when Bass boost sound is not required.
y Cassette holder u Cassette operation buttons 8 P AUSE: Press to stop the tape temporarily during playback and recording. § STOP/EJECT : Press to stop the tape. Pressing this button after the tape stops opens the cassette holder . 1 FF: Press to wind the tape forward rapidly .
10 REMOTE CONTROL UNIT (RC-BX25 only) Preparation before use • Installing batteries in the remote control unit 1. Remove the battery cover from the back of the remote control unit. 2. Insert two ‘‘R6/AA (15F)’’ size batteries. • Insert the batteries with the ª and · terminals matching the indication inside the battery compartment.
11 The following operations can be performed using the remote control unit. • Check the functions of the operation buttons carefully and operate them correctly .
12 ACCENSIONE (ON)/MODO DI A TTESA (ST ANDBY) Accensione (ON)/modo di attesa (ST ANDBY) • Accensione (ON): • Commutazione a ST ANDBY : COMPU PLA Y (solo quando viene utilizzata l’alimentazione c.
13 CONCERNING COMP ACT DISCS Since dirty , damaged and warped discs may damage the unit, care should be taken of the following: 1. Usable compact discs Use compact discs with the mark shown. 2. Notes on handling discs • Do not touch the reflective recorded surface.
14 PLA YING COMP ACT DISCS Playing an entire disc ... The following example assumes a compact disc with 10 tunes and a total playing time of 50 minutes 45 seconds. Operate in the order shown 1 Press to open the Disc holder . 2 Load a disc with the label side facing up and close the Disc holder .
15 Search playback (to locate the required position on the disc) • The required position can be located using fast-forward or reverse search while play- ing a disc. • Hold down the button; search play starts slowly and then gradually increases in speed.
16 Direct access playback (using the re- mote control) (RC-BX25 only) • Pressing any of the track number buttons will start play from the beginning of the des- ignated tune, without your having to press the 6 button. 1 Press the 7 (clear) button to set to the CD mode.
17 CASSETTE T APE Cassette tape 1. Loose tape may cause trouble. With a pen- cil, gently tighten the tape as shown. 2. T o prevent recordings from being erased accidentally , remove the tab(s) with a screw- driver . Reseal the slots with adhesive tape to erase and re-record after the tabs have been broken off.
18 RADIO RECEPTION Operate in the order shown 1 Press to set to TUNER mode. 2 Select the band (See page 8). 3 Tune to the required station. 4 Adjust. Using the antennas Note: The built-in ferrite core antenna can pick up in- terference from television receivers in the neighborhood and thereby disturb AM reception.
19 RECORDING • In recording, the ALC circuit automatically optimizes the recording level; adjustment of the recording level is unnecessary . Operate in order shown 1 Select the recording source. • When recording from the radio —Set the TUNER mode • When recording from the CD player —Set the CD mode 2 Load a cassette.
20 Synchronized recording with the CD player • In this system, the CD player starts play- back when deck enters the recording mode. Operate in the order shown 1 Set the (ST ANDBY/ON) button to ON. 2 Load a cassette. 3 Load a disc. 4 Set to CD. 5 Press the ¶ REC button with the T APE (Play) button, synchronized recording will start.
21 BEA T CUT switch When recording an AM broadcast, beats may be produced which are not heard when listen- ing to the broadcast. In such a case, set this switch so that the beats are eliminated.
22 Cleaning the lens If the lens in the CD pickup is dirty , this could degrade sound. Open the disc holder and clean the lens as shown. • Use a blower (available from a camera store) to blow dust off the lens. • If there are fingerprints, etc. on the lens, gently wipe clean with a cotton swab.
23 Note: When the deck is moved from a cold place of around 0°C to a warm place, it may not operate normally , because moisture has formed inside the deck.
VICTOR COMPANY OF JAPAN, LIMITED RC-BX25BK/RC-BX15BK/BU CD PORTABLE SYSTEM Printed in China 0299IMMIDEHIT EN, EP, IT A4-3C 98.12.24.
Ein wichtiger Punkt beim Kauf des Geräts JVC LVT0282-002A (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC LVT0282-002A noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC LVT0282-002A - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC LVT0282-002A reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC LVT0282-002A erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC LVT0282-002A besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC LVT0282-002A verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC LVT0282-002A. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC LVT0282-002A gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
