Benutzeranleitung / Produktwartung KD-SX980 des Produzenten JVC
Zur Seite of 38
ENGLISH GET0091-001A [J] ESP AÑOL FRANÇAIS INSTR UCTIONS MANU AL DE INSTR UCCIONES MANUEL D’INSTR UCTIONS RECEPT OR CON CD KD-SX980 RECEPTEUR CD KD-SX980 For customer Use: Enter below the Model No. and Serial No. which are located on the top or bottom of the cabinet.
2 ENGLISH BEFORE USE * For safety .... • Do not raise the volume le vel too much, as this will block outside sounds, making driving danger ous. • Stop the car befor e performing any complicated operations.
3 ENGLISH CONTENTS Thank you f or purchasing a JVC product. Please read all instructions carefully bef ore oper ation, to ensure y our complete understanding and to obtain the best possib le performance from the unit. How to reset your unit ..........
4 ENGLISH Control panel LOCA TION OF THE BUTTONS 1 4 / ¢ buttons 2 5 (up) button 3 ∞ (down) button 4 Remote sensor 5 Display windo w 6 0 (eject) button 7 FM AM button 8 CD CD-CH/MP3 INPUT button 9 .
ENGLISH 5 Preparing the remote controller 2. Place the battery . Slide the batter y into the holder with the + side facing upw ards so that the batter y is fixed in the holder . Lithium coin battery (product number: CR2025) 3. Return the battery holder .
ENGLISH 6 3 • Selects the preset stations while listening to the radio . Each time you press the b utton, the preset station number increases, and the selected station is tuned into . • Skips to the previous disc while listening to the CD changer .
7 ENGLISH BASIC OPERA TIONS 3 Adjust the volume. 4 Adjust the sound as you want. (See pages 21 – 23.) T o drop the volume in a moment Press briefly while listening to any source. “A TT” star ts flashing on the display , and the volume le vel will drop in a moment.
8 ENGLISH RADIO BASIC OPERA TIONS 200 Listening to the radio Y ou can use either automatic searching or manual searching to tune in to a par ticular station. Searching a station automatically: Auto search 1 Select the band (FM1 – 3, AM). * When “CLOCK” is set to “ON” (see page 26), the band indication will soon change to the clock time .
9 ENGLISH Storing stations in memor y Y ou can use one of the follo wing two methods to store broadcasting stations in memor y . • Automatic preset of FM stations: SSM (Strong- station Sequential Me.
10 ENGLISH Manual preset Y ou can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually . Ex.: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band 1 Select the band (FM1 – 3, AM) you want to store stations into (in this example, FM1).
11 ENGLISH 200 CD OPERA TIONS Playing a CD 1 Open the control panel. Note: When an external component is connected to the MP3 INPUT jack on the contr ol panel, be careful of handling a CD. 2 Insert a disc into the loading slot. The unit turns on, draws the disc and star ts pla yback automatically .
12 ENGLISH Locating a track or particular portion on a disc T o fast-forward or reverse the track T o go to the next track or the previous tracks T o go to a particular track directly Press the number button corresponding to the tr ack number to star t its pla yback.
13 ENGLISH T o play back only intros (Intr o Scan) Y ou can pla y back the first 15 seconds of each trac k sequentially . 1 Press MODE to enter the functions mode while pla ying a disc. “MODE” appears on the lo wer part of the displa y , and the number b uttons work as different function b uttons.
14 ENGLISH MP3 INTRODUCTION How are MP3 files recorded and played back? MP3 “ files (tracks) ” can be recorded in “ directories (folder s) ”—in PC ter minology . During recording, the files and directories can be arranged in a wa y similar to arranging files and directories/folders of computer data.
15 ENGLISH MP3 directory/ file configuration : Root : Directories : MP3 files 13 12 18 19 17 23 22 24 11 10 21 20 1 2 5 6 3 4 02 04 ROOT 15 16 14 06 07 05 09 01 08 7 8 9 03 Level 1 Level 2 Level 3 Lev.
16 ENGLISH MP3 OPERA TIONS 200 Refer also to “CD OPERA TIONS” on pages 11 to 13. Playing an MP3 disc 1 Open the control panel. 2 Insert an MP3 disc into the loading slot. The unit draws the disc. Pla yback star ts automatically from the first file of the first directory once disc check is completed.
17 ENGLISH T o change the display information While playing bac k an MP3 file, you can change the file information shown on the display . Each time you press DISP (displa y), the display changes to sh.
18 ENGLISH Ex.1: While playing an MP3 file in Directory 01 (see the illustration on page 15) T o skip to the next directory Press 5 (up) briefly while playing an MP3 disc. Each time you press the b utton consecutively , the ne xt directory is located (and the first file in the directory star ts playing, if recorded).
19 ENGLISH Ex.2: While playing an MP3 file in Directory 05 (see the illustration on page 15) T o skip to the previous directory Press ∞ (down) briefly while playing an MP3 disc. Each time you press the b utton consecutively , the pre vious director y is located (and the first file in the director y starts playing, if recorded).
20 ENGLISH T o play back files repeatedly (Repeat Play) Y ou can pla y bac k the current file or all the files in the current director y repeatedly . 1 Press MODE to enter the functions mode while playing an MP3 disc. “MODE” flashes on the lower par t of the display , and the number buttons work as different function buttons.
21 ENGLISH SOUND ADJUSTMENTS Adjusting the sound Y ou can adjust the sound characteristics to your preference . 1 Select the item you want to adjust. Each time you press the button, the adjustab le items change as follo ws: Indication T o do: Range BAS Adjust the bass .
22 ENGLISH Indication For: Preset values BAS TRE LOUD USER (Flat sound) 00 00 OFF ROCK Rock or +03 +01 ON disco music CLASSIC Classical +01 –02 OFF music POPS Light music +04 +01 OFF HIP HOP Funk or Rap +02 00 ON music JAZZ Jazz music +02 +03 OFF JAZZ POPS USER ROCK CLASSIC HIP HOP Ex.
23 ENGLISH • When “CEQ LINK” is set to “LINK ON,” The selected sound mode can be stored in memor y f or the current source. Each time you change to the same source, the same sound mode is also recalled and shown on the display . The C-EQ indicator also flashes.
24 ENGLISH OTHER MAIN FUNCTIONS Setting the clock 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the displa y . (See page 25.) 2 Set the hour . 1 Select “CLOCK H (hour)” if not sho wn on the display .
25 ENGLISH 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary . Preferred Setting Mode (PSM) items 1 2 Select. Hold. 3 Advance Back Back Adv ance 1:00 24 LINK ON 22, 26 LINK OFF ON 26 ON 26 26 Counter- clockwise F actor y-preset settings Set.
26 ENGLISH T o set Custom Equalizer Link – CEQ LINK A different sound mode (C-EQ) can be stored in memor y f or each source so that you can change the sound modes simply by changing the sources. When shipped from the factory , this mode is deactivated.
27 ENGLISH Note: F or connecting the Line Input Adaptor KS-U57 and the external component, r efer to the Installation/Connection Manual (separate volume). T o adjust the auxiliary input level – AUX ADJ Adjust the auxiliar y input le vel properly when an e xter nal component is connected to the MP3 INPUT jack.
28 ENGLISH 3 Select a character . • See ne xt column for av ailable characters . 4 Move the cursor to the next (or previous) character position. 5 Repeat steps 3 and 4 until you finish inputting the name. 6 Finish the procedure while the last selected character is flashing.
29 ENGLISH Attaching the control panel 1 Insert the right side of the control panel into the groo ve on the panel holder . 2 Press the left side of the control panel to fix it to the panel holder . Note on cleaning the connectors: If you frequently detac h the contr ol panel, the connectors will deteriorate .
30 ENGLISH CD CHANGER OPERA TIONS W e recommend that you use one of the CH-X series with your unit. If you ha ve another CD automatic changer , consult your JVC car audio dealer f or connections. • F or e xample, if your CD automatic chang er is one of the KD-MK series, you need a cor d (KS-U15K) for connecting it to this unit.
31 ENGLISH T o go to a particular disc directly Press the number b utton corresponding to the disc number to start its playback (while the CD changer is pla ying). • T o select a disc number from 1 – 6: Press 1 (7) – 6 (12) briefly . • T o select a disc number from 7 – 12: Press and hold 1 (7) – 6 (12) for more than 1 second.
32 ENGLISH Mode Plays at random RND Indicator RND1 RND2 Canceled Selecting CD playback modes T o play back tracks at random (Random Play) 1 Press MODE to enter the functions mode while playing a disc. “MODE” appears on the low er part of the display , and the number buttons work as different function buttons.
ENGLISH 33 EXTERNAL COMPONENT OPERA TIONS 200 P or table MP3 pla yer , etc. MP3 INPUT* * Not compatible with digital signals. 2 T urn on the connected component and start playing the source. 3 Adjust the volume. 4 Adjust the sound characteristics you want.
34 ENGLISH TROUBLESHOOTING What appears to be trouble is not alw ays serious. Check the f ollowing points before calling a service center . Remedies Inser t the disc correctly . Stop playbac k while dr iving on rough roads. Change the disc. Check the cords and connections.
35 ENGLISH MP3 Playback Causes No disc in the magazine. This unit is not connected to a CD changer correctly . No MP3 files are recorded on the disc. MP3 files do not hav e the extension code—mp3 in their file names. MP3 files are not recorded in the f or mat compliant with ISO 9660 Lev el 1 or 2.
36 ENGLISH Handling discs This unit has been designed to reproduce CDs and CD-Rs. • Y ou can also play bac k CD T e xt. • Y ou can also play bac k your original CD-Rs (Recordable) and CD-R Ws (Rewritable) either in audio CD f or mat or in MP3 f or mat.
37 ENGLISH CD PLA YER SECTION T ype: Compact disc play er Signal Detection System: Non-contact optical pic kup (semiconductor laser) Number of channels: 2 channels (stereo) F requency Response: 5 Hz t.
EN, SP , FR 0102KKSMDTJEIN J V C VICTOR COMPANY OF JAPAN, LIMITED Having TROUBLE with operation? Please reset your unit Refer to page of How to Reset Still having trouble?? USA ONL Y Call 1-800-252-5722 http://www .jvc.com W e can help y ou! http://www .
Ein wichtiger Punkt beim Kauf des Geräts JVC KD-SX980 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC KD-SX980 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC KD-SX980 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC KD-SX980 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC KD-SX980 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC KD-SX980 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC KD-SX980 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC KD-SX980. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC KD-SX980 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
