Benutzeranleitung / Produktwartung KD-SH707 des Produzenten JVC
Zur Seite of 53
ENGLISH L VT0830-001A [J] ESP AÑOL FRANÇAIS CD RECEIVER KD-SH909/KD-SH707 INSTR UCTIONS MANU AL DE INSTR UCCIONES MANUEL D’INSTR UCTIONS RECEPT OR CON CD KD-SH909/KD-SH707 RECEPTEUR CD KD-SH909/KD-SH707 For customer Use: Enter below the Model No. and Serial No.
2 ENGLISH BEFORE USE * For safety .... • Do not raise the volume le vel too much, as this will block outside sounds, making driving dang erous. • Stop the car befor e performing any complicated operations.
3 ENGLISH CONTENTS Thank you f or purchasing a JVC product. Please read all instructions carefully before oper ation, to ensure your complete understanding and to obtain the best possib le performance from the unit. How to reset your unit ............
4 ENGLISH CAUTION on Volume Setting CDs pr oduce very little noise compar ed with other sour ces. If the volume level is adjusted for the tuner , for example , the speakers may be damag ed by the sudden increase in the output le vel. Ther efor e, lower the volume befor e playing a disc and adjust it as r equired during playbac k.
5 ENGLISH ATT MOSFET E-BASS DISP BAND MODE EB D B M 1 2 3 y t e 4 5 6 7 8 9 q p w DIRECTORY ST A TION TRACK FILE DISC LOCA L RPT ST RND MO i g hj kl o / ; a sd f u 200W MP3 INPUT r KD-SH909 KD-SH707 C.
ENGLISH 6 5 • Searches for stations while listening to the radio . • F ast-f orw ards or re verses the tr ac k/file if pressed and held while listening to any disc.
ENGLISH 7 Preparing the remote controller 2. Place the battery . Slide the batter y into the holder with the + side facing upw ards so that the battery is fixed in the holder . Lithium coin battery (product number: CR2025) 3. Return the battery holder .
8 ENGLISH 2 Adjust the volume. Note: After adjusting the volume, you can push in the contr ol dial to avoid unintended operations. T o use it again, push the contr ol dial again to make it come out. 3 Adjust the sound as you want. (See pages 27 – 29.
9 ENGLISH 2 1 Setting the clock 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the displa y . (See page 31.) 2 Set the hour . 1 Select “CLOCK H (hour)” if not sho wn on the displa y . 2 Adjust the hour .
10 ENGLISH RADIO BASIC OPERA TIONS EB E-BASS DISP BAND MODE MP3 INPUT T o stop searching before a station is received, press the same button y ou hav e pressed for searching. T o tune in to FM stations only with strong signals 1 Press MODE (M) to enter the functions mode while listening to an FM broadcast.
11 ENGLISH Searching a station manually: Manual search 1 Select FM or AM . 1 Press SOURCE repeatedly to select FM or AM as the source. 2 If necessar y , press BAND (B) repeatedly to select the FM band number . Each time you press the b utton, the FM band changes as follo ws: Note: This r eceiver has three FM bands (FM1, FM2, FM3).
12 ENGLISH Storing stations in memory Y ou can use one of the f ollowing two methods to store broadcasting stations in memory . • Automatic preset of FM stations: SSM (Strong- station Sequential Mem.
13 ENGLISH 2 T une in to a station (in this example, of 88.3 MHz). 3 Press and hold the number button (in this example, 1) f or more than 2 seconds. 4 Repeat the above procedure to store other stations into other preset numbers. Notes: • A pre viously preset sta tion is erased when a new station is stor ed in the same preset n umber .
14 ENGLISH CD OPERA TIONS When playing an MP3 disc , refer also to “MP3 OPERA TIONS” on pages 20 to 26. Playing a CD 1 Open the control panel. The control panel mov es down, and the loading slot appears. Note: When an external component is connected to the MP3 INPUT jack, be car eful of handling a disc.
15 ENGLISH T o return the control panel to its previous position, press 0 again. • If you k eep the loading slot open for one minute (or 30 seconds when you ha ve ejected a disc with the ignition ke y turned to “OFF”), a beep sounds and the control panel returns to its pre vious position.
16 ENGLISH Selecting CD playback modes T o play back tracks at random (Random Play) Y ou can play bac k all trac ks on the disc at random. 1 Press MODE (M) while pla ying a disc. This unit enters the functions mode. 2 Press RND (random) while still in the functions mode, so that “RANDOM” flashes on the displa y .
17 ENGLISH Prohibiting disc ejection Y ou can prohibit disc ejection and can lock a disc in the loading slot. While pressing SEL (select), press and hold 0 for more than 2 seconds. “NO EJECT” flashes on the displa y for about 5 seconds, and the disc is lock ed and cannot be ejected.
18 ENGLISH MP3 INTRODUCTION How are MP3 files recorded and played back? MP3 “ files (tracks) ” can be recorded in “ directories (folder s) ”—in PC ter minology . During recording, the files and directories can be arranged in a wa y similar to arranging files and directories/folders of computer data.
19 ENGLISH MP3 directory/ file configuration MP3 playback/search order (page 22) • The numbers in circles below the MP3 files ( ) indicate the playbac k order and search order of the MP3 files. Nor mally this unit plays back MP3 files in the recorded order .
20 ENGLISH MP3 OPERA TIONS EB E-BASS DISP BAND MODE MP3 INPUT Refer also to “CD OPERA TIONS” on pages 14 to 17. Playing an MP3 disc 1 Open the control panel. The control panel mov es down, and the loading slot appears. 2 Insert an MP3 disc into the loading slot.
21 ENGLISH • When “T A G DISP” is set to “OFF” * When the sour ce symbol animation display is not selected. Notes: • All the files on the disc will be played r epeatedly until you stop playback—All F ile Repeat Pla y . • MP3 discs r equir e a longer readout time *** .
22 ENGLISH Press 4 br iefly , while playing, to skip bac k to the beginning of the current file. Each time you press the button consecutiv ely , the beginning of the previous files is located and play ed back. (See “MP3 pla yback/ search order” on page 19.
23 ENGLISH T o go to a particular director y directly IMPORT ANT: T o directly select the directories using the number b utton(s), it is required that directories are assigned 2 digit numbers at the beginning of their director y names. (This can only be done during the recording of CD-Rs or CD-RWs .
24 ENGLISH T o skip to the previous director y—either on the same hierarchy level or on a different hierarchy level On the control panel: 1 Press MODE (M) while pla ying an MP3 disc. The unit enters the functions mode. 2 Press 4 briefly while still in the functions mode.
25 ENGLISH T o skip to the previous director y on the same hierarchy level (only within the same parent director y) On the remote controller: Each time you press the b utton consecutively , the previous directory on the same hierarchy lev el is located (and the first file in the director y starts playing, if recorded).
26 ENGLISH T o play back only intros (Intro scan) Y ou can play bac k the first 15 seconds of each file sequentially . 1 Press MODE (M) while playing an MP3 disc. The unit enters the functions mode. 2 Press INT (intro scan) while still in the functions mode, so that “INTRO1” or “INTR O2” flashes on the display .
27 ENGLISH SOUND ADJUSTMENTS 1 Select the item you want to adjust. Each time you press the b utton, the adjustable items change as f ollows: Indication T o do: Range F ADER* Adjust the front R06 (Rear only) and rear speaker | balance. F06 (F ront only) BAL Adjust the left L06 (Left only) and right speaker | balance.
28 ENGLISH Selecting preset sound modes (EQ) Y ou can select a preset sound mode suitable to the music genre. 1 Press EQ to activate the sound mode (EQ).
29 ENGLISH Storing your own sound adjustments Y ou can adjust the sound modes to your pref erence and store your o wn adjustments in memory (USER 1, USER 2 and USER 3). • There is a time limit in doing the follo wing procedure. If the setting is canceled bef ore y ou finish, star t from step 1 again.
30 ENGLISH OTHER MAIN FUNCTIONS Changing the general settings (PSM) Y ou can change the items listed on the next page by using the PSM (Pref erred Setting Mode) control. Basic Procedure 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the displa y .
31 ENGLISH Preferred Setting Mode (PSM) items 1 3 1:00 9 Back Adv ance OFF ON ON 9 Back Advance OFF OFF 28 ON AU TO ON OFF AU TO 3 2 2 OFF ON ON 32 OFF ON ON 32 05 32 01 — 10 ONCE A UT O OFF 32 ONCE.
32 ENGLISH T o turn the key-touch tone on or off – BEEP SW Y ou can deactivate the k ey-touch tone if you do not want it to beep each time you press a b utton. When shipped from the f actor y , the key-touch tone is activated. • ON: Activates the k ey-touch tone .
33 ENGLISH T o select the external component to use – EXT IN (For KD-SH707 only) Y ou can connect the external component to the CD changer jack on the rear using the Line Input Adaptor KS-U57 (not supplied).
34 ENGLISH T o turn the auxiliar y input switch on or off – AUX IN Y ou can switch the auxiliary input off when no external component is connected to the MP3 INPUT jack. When shipped from the f actor y , the auxiliar y input s witch is set to “ON.
35 ENGLISH Assigning names to the sources Y ou can assign names to stations, CDs, and the external components. After assigning a name, it will appear on the displa y when you select the source.
36 ENGLISH Changing the control panel angle Y ou can change the angle of the control panel to four positions . Adjust the angle to the position you want. Each time y ou press the button, the panel angle changes as f ollows: When using the remote controller Press ANGLE ∞ repeatedly .
37 ENGLISH Detaching the control panel Y ou can detach the control panel when leaving the car . When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder .
ENGLISH 38 EXTERNAL COMPONENT OPERA TIONS Playing external components For KD-SH909: Y ou can connect two e xternal components to this unit. Connect one to the MP3 INPUT jac k on the control panel, and the other to the LINE IN plugs on the rear .
ENGLISH 39 When connecting a DVD player: : T urns on and off the power . 3 : Starts playback. ¡ : • F ast-f orw ards the chapter when pressed and held. • Skips to the beginning of the ne xt chapter when pressed briefly . 1 : • Re verses the chapter when pressed and held.
40 ENGLISH CD CHANGER OPERA TIONS EB E-BASS DISP BAND MODE MP3 INPUT W e recommend that you use one of the CH-X series with your unit. If you ha ve another CD automatic changer , consult your JVC car audio dealer f or connections.
41 ENGLISH T o go to a particular disc directly Press the number b utton corresponding to the disc number to start its playback (while the CD changer is playing). • T o select a disc number from 1 – 6: Press 1 (7) – 6 (12) briefly . • T o select a disc number from 7 – 12: Press and hold 1 (7) – 6 (12) for more than 1 second.
42 ENGLISH T o play back tracks repeatedly (Repeat Play) Y ou can play bac k the current trac k or all tracks on the current disc or specified disc in the CD changer .
43 ENGLISH ADDITIONAL INFORMA TION Sound modes (preset frequency level settings) The list below sho ws the preset frequency lev el settings for each sound mode . • Y ou can adjust the preset sound modes (e xcept USER 1/2/3) temporarily . Howe v er , your temporary adjustments will be reset when you select another sound mode.
44 ENGLISH TROUBLESHOOTING What appears to be trouble is not alw ays serious. Check the follo wing points before calling a service center . Remedies Change the disc. Stop playbac k while driving on rough roads. Change the disc. Check the cords and connections.
45 ENGLISH MP3 Playback Symptoms • “NO DISC” appears on the displa y . • “RESET 8” appears on the displa y . • “RESET 1” – “RESET 7” appears on the display . • Disc cannot be pla yed back. • Files skip , or 00’00” appears and playbac k stops.
46 ENGLISH When playing a CD-R or CD-RW Y ou can play bac k your original CD-Rs or CD-R Ws recorded in audio CD format or in MP3 f or mat. (Howe ver , the y ma y not be play ed back depending on their characteristics or recording conditions.
47 ENGLISH AUDIO AMPLIFIER SECTION Maximum P ow er Output: F ront: 50 W per channel Rear : 50 W per channel Continuous P o wer Output (RMS): F ront: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8 % total harmonic distor tion. Rear : 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.
EN, SP , FR 0102MNMMDTJEIN J V C VICTOR COMPANY OF JAPAN, LIMITED Having TROUBLE with operation? Please reset your unit Refer to page of How to Reset Still having trouble?? USA ONL Y Call 1-800-252-5722 http://www .jvc.com W e can help y ou! http://www .
KD-SH909 KD-SH707 Installation/Connection Manual Manual de instalación/conexión Manuel d’installation/raccordement ESP AÑOL • Esta unidad está diseñada para funcionar con 12 V de CC, con sistemas eléctricos de masa NEGA TIV A.
2 • When installing the unit without using the sleeve • Instalación de la unidad sin utilizar la cubierta • Lors de l’installation de l’appareil sans utiliser de manchon In a T o yota f or example , first remov e the car radio and install the unit in its place .
3 L R + - + - + - + - A T ypical Connections / Conexiones típicas / Raccordements typiques Before connecting: Chec k the wir ing in the vehicle carefully not to f ail in connecting this unit. Incorrect connection ma y cause a serious damage to this unit.
4 R L L L RR Usted podrá conectar un subwoofer a través de un amplificador para reforzar los graves. • Con respecto a sus conexiones, r efiérase a las instrucciones suministradas con sus subwoofer . V ous pouvez connecter un caisson de gra v e par un amplificateur pour renforcer les g ra ves.
12 3 4 ENGLISH When shipped from the f actor y , display demonstration has been activ ated, and star ts automatically when no operations are done and no sound comes in f or about 3 minutes. T o cancel the display demonstration, f ollow the procedure below .
Ein wichtiger Punkt beim Kauf des Geräts JVC KD-SH707 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC KD-SH707 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC KD-SH707 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC KD-SH707 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC KD-SH707 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC KD-SH707 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC KD-SH707 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC KD-SH707. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC KD-SH707 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
