Benutzeranleitung / Produktwartung KD-S580 des Produzenten JVC
Zur Seite of 23
KD-S6250/S580 [EN] GET0064-001A [J] GET0064-001A [J] For customer Use: Enter below the Model No. and Serial No. which are located on the top or bottom of the cabinet. Retain this information for future reference. Model No. Serial No. For installation and connections, refer to the separate manual.
2 ENGLISH KD-S6250/S580 [EN] GET0064-001A [J] INFORMA TION (For USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
3 ENGLISH KD-S6250/S580 [EN] GET0064-001A [J] CONTENTS Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. How to reset your unit .
ENGLISH 4 KD-S6250/S580 [EN] GET0064-001A [J] MO RPT RND MODE SCM CD AM FM SSM DIRECT TRACK A CCESS 1 2 3 4 9 8 7 6 y e q ; a s d f g h j l k p 5 w r t o i u LOCA TION OF THE BUTTONS 1 (Standby/On/Att.
ENGLISH 5 KD-S6250/S580 [EN] GET0064-001A [J] 1 2 3 4 6 7 5 RM-RK31 Remote controller (only for KD-S6250) This section is only for KD-S6250. 1 • T urns on the unit if pressed when the unit is turned off. • T urns off the unit if pressed and held until “ SEE YOU ” appears on the display .
ENGLISH 6 KD-S6250/S580 [EN] GET0064-001A [J] Remote sensor (back side) W ARNING: • Stor e the batteries in a place which childr en cannot r each. If a child accidentally swallows the battery , consult a doctor immediately . • Do not r echarg e, short, disassemble or heat the batteries or dispose it in a fir e.
7 ENGLISH KD-S6250/S580 [EN] GET0064-001A [J] 4 Adjust the sound as you want (see pages 14 – 16). T o drop the volume in a moment Press briefly while listening to any source. “A TT” starts flashing on the display , and the volume level will drop in a moment.
8 ENGLISH KD-S6250/S580 [EN] GET0064-001A [J] RADIO BASIC OPERA TIONS Listening to the radio Y ou can use either automatic searching or manual searching to tune into a particular station. Searching a station automatically: Auto search 1 Select the band (FM 1 – 3, AM).
9 ENGLISH KD-S6250/S580 [EN] GET0064-001A [J] SSM 3 T une into a station you want while “ M ” is flashing. • If you release your finger from the button, the manual mode will automatically turn off after 5 seconds. • If you hold down the button, the frequency keeps changing until you release the button.
10 ENGLISH KD-S6250/S580 [EN] GET0064-001A [J] MO RPT RND 7 8 9 10 11 12 SSM Manual preset Y ou can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually . Ex: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band. 1 Select the band (FM1 – 3, AM) you want to store FM stations into (in this example, FM1).
11 ENGLISH Playing a CD 1 Insert a disc into the loading slot. The unit turns on, draws a CD and starts playback automatically . Note: When a CD is inserted upside down, the CD automatically ejects. Note on One-T ouch Operation: When a CD is alr eady in the loading slot, pressing CD turns on the unit and starts playback automatically .
12 ENGLISH SSM Locating a track or a particular portion on a CD T o fast-forward or reverse the track T o go to the next tracks or the previous tracks T o go to a particular track directly Press the number button corresponding to the track number to start its playback.
13 ENGLISH Prohibiting CD ejection Y ou can prohibit the CD ejection and can lock a CD in the loading slot. Press and hold CD and 0 for more than 2 seconds. “ EJECT ” flashes on the display for about 5 seconds, and the CD is locked and cannot be ejected.
14 ENGLISH SOUND ADJUSTMENTS Adjusting the sound Y ou can adjust the sound characteristics to your preference. 1 Select the item you want to adjust. Each time you press the button, the adjustable items change as follows: Indication T o do: Range BAS Adjust the bass.
15 ENGLISH Recalling the sound modes When “SCM LINK” is set to “LINK ON, ” select the source. Each time you change the playback source, the SCM indicator flashes on the display . The sound mode stored in memory for the selected source is recalled.
16 ENGLISH Storing your own sound adjustment Y ou can adjust the sound modes (BEA T , SOFT , POP: see page 15) to your preference and store your own adjustments in memory . • There is a time limit in doing the following procedure. If the setting is cancelled before you finish, start from step 1 again.
17 ENGLISH KD-S6250/S580 [EN] GET0064-001A [J] OTHER MAIN FUNCTIONS Setting the clock 1 Press and hold SEL (Select) for more than 2 seconds. “CLOCK H”, “CLOCK M”, “SCM LINK” or “LEVEL” appears on the display . 2 Set the hour . 1 Select “CLOCK H” if not shown on the display .
18 ENGLISH KD-S6250/S580 [EN] GET0064-001A [J] 3 Select the desired mode — “ VOL 1 ” , “ VOL 2 ” or “ OFF ” . 4 Press SEL (select) to finish the setting. Selecting the level display Y ou can select the level display according to your preference.
19 ENGLISH KD-S6250/S580 [EN] GET0064-001A [J] Note on cleaning the connectors: If you fr equently detach the contr ol panel, the connectors will deteriorate. T o minimize this possibility , periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being car eful not to damage the connectors.
20 ENGLISH KD-S6250/S580 [EN] GET0064-001A [J] MAINTENANCE Handling CDs This unit has been designed only to reproduce the CDs bearing the mark. • Other discs cannot be played back. How to handle CDs When removing a CD from its case, press down the center holder of the case and lift the CD out, holding it by the edges.
21 ENGLISH KD-S6250/S580 [EN] GET0064-001A [J] TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a service center . Symptoms • CD cannot be played back. • CD sound is sometimes interrupted.
22 ENGLISH KD-S6250/S580 [EN] GET0064-001A [J] SPECIFICA TIONS AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 45 watts per channel Rear: 45 watts per channel Continuous Power Output (RMS): Front: 17 watts per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.
KD-S6250/S580 [EN] GET0064-001A [J] 1001KKSFLEJEIN EN, SP , FR J V C VICTOR COMPANY OF JAPAN, LIMITED Having TROUBLE with operation? Please reset your unit Refer to page of How to Reset Still having trouble?? USA ONL Y Call 1-800-252-5722 http://www .
Ein wichtiger Punkt beim Kauf des Geräts JVC KD-S580 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC KD-S580 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC KD-S580 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC KD-S580 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC KD-S580 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC KD-S580 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC KD-S580 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC KD-S580. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC KD-S580 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.