Benutzeranleitung / Produktwartung KD-R406 des Produzenten JVC
Zur Seite of 38
ENGLISH CD RECEIVER KD-R406/KD-R405 KD-R406/KD-R405 For canceling the display demonstration, see page 7. For installation and connections, refer to the separate manual.
ENGLISH 2 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
ENGLISH 3 How to reset your unit • Your preset adjustments will also be erased (except the registered Bluetooth device, see page 10). How to forcibly eject a disc • Be careful not to drop the disc when it ejects. • If this does not work, reset your unit.
ENGLISH 4 Basic operations Using the control panel 8 Eject disc. 9 Select the sound mode. p Detach the panel. q Change the display information. w • FM/AM : Search for station. • CD/CD-CH : Select track. • IPOD : Select track. • BT-PHONE/BT-AUDIO : Select setting item/ registered device.
ENGLISH 5 OPERATIONS Before using the remote controller: • Aim the remote controller directly at the remote sensor on the unit. • DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting). Installing the lithium coin battery (CR2025) Caution: • Danger of explosion if battery is incorrectly replaced.
ENGLISH 6 1 • Turns the power on if pressed briefly or attenuates the sound when the power is on. • Turns the power off if pressed and held. 2 • Changes the preset stations. • Changes the folder of the MP3/WMA. • While playing an MP3 disc on an MP3-compatible CD changer: – Changes the disc if pressed briefly.
ENGLISH 7 OPERATIONS Preparation Cancel the display demonstration and set the clock • See also page 20. 1 Turn on the power. 2 [Turn] = [Press] Cancel the display demonstrations Select “ DEMO ,” then “ DEMO OFF .” Set the clock Select “ CLOCK ” = “ CLOCK SET .
ENGLISH 8 Listening to the radio 1 Select “FM” or “AM.” 2 Search for a station to listen—Auto Search. Manual Search: Hold either one of the buttons until “M” flashes on the display, then press it repeatedly. • When receiving an FM stereo broadcast with sufficient signal strength, “ST” lights up on the display.
ENGLISH 9 OPERATIONS Manual presetting (FM/AM) You can preset up to 18 stations for FM and 6 stations for AM. Ex.: Storing FM station of 92.50 MHz into preset number “04.” 1 2 Select preset number “04.” or [Turn] = [Press] 3 Selecting preset station Disc operations 1 Turn on the power.
ENGLISH 10 OPERATIONS & EXTERNAL DEVICES Pressing (or holding) the following buttons allows you to... MP3/WMA: Select folder [Press] Select track [Hold] Reverse/fast-forward track Selecting the playback modes You can use only one of the following playback modes at a time.
ENGLISH 11 EXTERNAL DEVICES Registering using “OPEN” Preparation: Operate the device to turn on its Bluetooth function. 1 Select “BT-PHONE” or “BT-AUDIO.” 2 Select “NEW DEVICE.” 3 Select “OPEN.” 4 Enter a PIN (Personal Identification Number) code to the unit.
ENGLISH 12 Connecting/disconnecting/deleting a registered device 1 Select “BT-PHONE” or “BT-AUDIO.” 2 Select a registered device you want to connect/disconnect/delete.
ENGLISH 13 EXTERNAL DEVICES 2 Select a calling method. Call history: 1 Select a call history (REDIAL*, RECEIVED*, MISSED*). 2 Then select a name (if it is acquired) or phone number. Phone book: 1 Select “PHONE BOOK*”. The list of phone number appears.
ENGLISH 14 Listening to the CD changer It is recommended to use a JVC MP3-compatible CD changer (separately purchased) with your unit. You can connect a CD changer to the CD changer jack on the rear of the unit. • You can only play conventional CDs (including CD Text) and MP3 discs.
ENGLISH 15 EXTERNAL DEVICES Listening to the iPod Selecting a track from the menu 1 Enter the main menu. This mode will be canceled if no operations are done for about 5 seconds. 2 Select the desired menu. PLAYLISTS Ô ARTISTS Ô ALBUMS Ô SONGS Ô GENRES Ô COMPOSERS Ô (back to the beginning) 3 Confirm the selection.
ENGLISH 16 EXTERNAL DEVICES Listening to the other external components You can connect an external component to: • CD changer jack on the rear of this unit using the following adapters: – Line Inp.
ENGLISH 17 SETTINGS Selecting a preset sound mode You can select a preset sound mode suitable to the music genre. • See also page 20 (“ EQ ”). Preset value setting for each sound mode Sound mode Preset value BASS MIDDLE TREBLE LOUD (loudness) Freq.
ENGLISH 18 3 Select a tone. 4 Adjust the sound elements of the selected tone. 1 Adjust the frequency. 2 Adjust the level. 3 Adjust the Q-slope. Sound elements Range/selectable items BASS MIDDLE TREBLE Frequency 60 Hz 80 Hz 100 Hz 120 Hz 500 Hz 1.0 kHz 1.
ENGLISH 19 SETTINGS Setting menu ( : Initial) AUTO CNNCT (connect) When the unit is turned on, the connection is established automatically with... OFF : No Bluetooth device. LAST : The last connected Bluetooth device. ORDER : The available registered Bluetooth device found at first.
ENGLISH 20 Initial: Underlined Menu operations Category Menu items Selectable settings, [reference page] DEMO DEMO Display demonstration • DEMO ON • DEMO OFF : Display demonstration will be activated automatically if no operation is done for about 20 seconds, [7].
ENGLISH 21 SETTINGS Continued on the next page Category Menu items Selectable settings, [reference page] TUNER MONO * 3 Monaural mode • MONO ON • MONO OFF : Activate monaural mode to improve FM reception, but stereo effect will be lost, [8]. : Restore the stereo effect.
ENGLISH 22 Category Menu items Selectable settings, [reference page] AUDIO L/O MODE Line output mode • SUB.W • REAR : Select if the REAR LINE OUT terminals are used for connecting a subwoofer (through an external amplifier). : Select if the REAR LINE OUT terminals are used for connecting the speakers (through an external amplifier).
ENGLISH 23 SETTINGS Creating your own color —USER Color You can create your own colors—“DAY COLOR” or “NIGHT COLOR.” DAY COLOR: Used when “ DIMMER ” is set to “ DIMMER OFF .” NIGHT COLOR: Used when “ DIMMER ” is set to “ DIMMER ON .
ENGLISH 24 Basic operations Turning on the power • By pressing SRC button on the unit, you can also turn on the power. If the source is ready, playback also starts. Turning off the power • If you turn off the power while listening to a track, playback will start from where it had been stopped previously next time you turn on the power.
ENGLISH 25 REFERENCES Continued on the next page Files recorded in VBR have a discrepancy in the elapsed time display, and do not show the actual elapsed time. In particular, this difference becomes noticeable after performing the search function. • This unit cannot play back the following files: – MP3 files encoded in MP3i and MP3 PRO format.
ENGLISH 26 • ERROR Try the operation again. If “ERROR” appears again, check if the device supports the function you have tried. • UNFOUND No available Bluetooth device is detected by “SEARCH.” • LOADING The unit is updating the phone book *.
ENGLISH 27 REFERENCES Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level.
ENGLISH 28 Symptoms Remedies/Causes MP3/WMA playback • Disc cannot be played back. • Use a disc with MP3/WMA tracks recorded in a format compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet. • Add the extension code <.mp3> or <.wma> to the file names.
ENGLISH 29 REFERENCES Continued on the next page Symptoms Remedies/Causes Bluetooth • The unit does not make pairing with the Bluetooth device. • Enter the same PIN code for both the unit and target device. • Select the device name from “SPECIAL,” then try to connect again.
ENGLISH 30 Symptoms Remedies/Causes iPod • The iPod does not turn on or does not work. • Check the connecting cable and its connection. • Update the firmware version. • Charge the battery. • The sound is distorted. Deactivate the equalizer either on this unit or the iPod.
ENGLISH 31 REFERENCES How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
ENGLISH 32 AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range: Bass: ±12 dB (60 Hz, 80 Hz, 100 Hz, 120 Hz) Q0.
ENGLISH 33 REFERENCES CD PLAYER SECTION Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: .
© 2008 Victor Company of Japan, Limited EN, CT 0808DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Rear_KD-R406_005A_f.
1 KD-R406/KD-R405 Installation/Connection Manual 安裝/連接手冊 GET0571-010A [UT] J Handles 板條型把手 F Washer (ø5) 墊圈（ ø5 ） G Lock nut (M5) 鎖定螺母（ M5 ） H Mounting bolt (M4 × 5 mm; M5 × 12.5 mm) 緊固螺栓（ M4 × 5 mm; M5 × 12.
2 When using the optional stay / 若選用支撐架 Note : When installing the unit on the mounting bracket, make sure to use the 8 mm-long screws. If longer screws are used, they could damage the unit.
3 A Typical connections / 典型的接線方法 Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in color.
4 Connecting the external amplifier or subwoofer/ 連接至外接功率放大器或重低音揚聲器 You can connect an amplifier to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit.
Ein wichtiger Punkt beim Kauf des Geräts JVC KD-R406 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC KD-R406 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC KD-R406 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC KD-R406 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC KD-R406 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC KD-R406 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC KD-R406 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC KD-R406. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC KD-R406 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
