Benutzeranleitung / Produktwartung KD-R316 des Produzenten JVC
Zur Seite of 26
ENGLISH GET0623-001A [U/UH] EN, TH 1009DTSMDTJEIN © 2009 Victor Company of Japan, Limited For canceling the display demonstration, see page 4. / CD RECEIVER / KD-R416 / KD-R415 / KD-R316 / KD-R315 INSTRUCTIONS For installation and connections, refer to the separate manual.
2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
3 ENGLISH How to attach/detach the control panel How to reset your unit Your preset adjustments will also be erased. How to forcibly eject a disc • You can forcibly eject the loaded disc even if the disc is locked. To lock/unlock the disc, 8. • Be careful not to drop the disc when it ejects.
4 ENGLISH 1 Turn on the power. 2 3 Setting the clock 1 Turn on the power. 2 3 Select <CLOCK>. 4 Select <CLOCK SET>. 5 Adjust the hour. 6 Adjust the minute.
5 ENGLISH Warning (to prevent accidents and damage): • Do not install any battery other than CR2025 or its equivalent. • Do not leave the remote controller in a place (such as dashboards) exposed to direct sunlight for a long time. • Store the battery in a place where children cannot reach.
6 ENGLISH Basic operations Control dial Ejects the disc Loading slot Remote sensor • DO NOT expose to bright sunlight. Display window Auxiliary input jack Detaches the panel When you press or hold the following button(s)... Main unit Remote controller General operation Turns on.
7 ENGLISH Manual search “M” flashes, then press the button repeatedly. When an FM stereo broadcast is hard to receive 1 2 ] <TUNER> ] <MONO> ] <MONO ON> Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure to select <MONO OFF>.
8 ENGLISH Manual presetting (FM/AM) You can preset up to 18 stations for FM and 6 stations for AM. Ex.: Storing FM station of 92.50 MHz into preset number “04.” 1 ] “92.50MHz” 2 “PRESET MODE” flashes. 3 ] Selects preset number “04.” “P04” flashes and “MEMORY” appears.
9 ENGLISH Selects folder of the MP3/WMA Selects track Fast-forwards or reverses the track Selecting a track/folder 1 2 For MP3/WMA discs, select the desired folder, then the desired track by repeating step 2 . • To return to the previous menu, press BACK .
10 ENGLISH Listening to a USB device (For KD-R416/KD-R415) This unit can play MP3/WMA tracks stored in a USB device. ~ ] Turn on the power. Ÿ All tracks will be played repeatedly until you change the source or detach the USB device. If a USB device has been attached.
11 ENGLISH Listening to the other external components You can connect an external component to the AUX (auxiliary) input jack on the control panel. Preparation: Make sure <AUX ON> is selected for the <SRC SELECT> = <AUX IN> setting.
12 ENGLISH Selecting a preset sound mode You can select a preset sound mode suitable for the music genre. FLAT = NATURAL = DYNAMIC = VOCAL BOOST = BASS BOOST = USER = (back to the beginning) While listening, you can adjust the tone level of the selected sound mode.
13 ENGLISH Menu operations 1 2 3 Repeat step 2 if necessary. • To return to the previous menu, press BACK . • To exit from the menu, press DISP or MENU .
14 ENGLISH Category Menu item Selectable setting, [ Initial: Underlined ] AUDIO FADER * 3 R06 – F06 [ 00 ] : Adjust the front and rear speaker output balance.
15 ENGLISH Category Menu item Selectable setting, [ Initial: Underlined ] AUDIO BEEP • BEEP ON • BEEP OFF : Activates the keypress tone. : Deactivates the keypress tone.
16 ENGLISH To keep discs clean A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvents (for example, conventional record cleaner, spray, thinner, benzine, etc.
17 ENGLISH More about this unit Basic operations General • If you turn off the power while listening to a track, playback will start from where it had been stopped previously next time you turn on the power. • If no operation is done for about 60 seconds after pressing MENU button, the operation will be canceled.
18 ENGLISH • Do not use the following CD-Rs or CD-RWs: – Discs with stickers, labels, or a protective seal stuck to the surface. – Discs on which labels can be directly printed by an ink jet printer. Using these discs under high temperature or high humidity may cause malfunctions or damage to the unit.
19 ENGLISH – Bit rate of MP3/WMA: 32 kbps — 320 kbps – Sampling frequency of MP3: 32 kHz, 44.1 kHz, 48 kHz (for MPEG-1) 16 kHz, 22.05 kHz, 24 kHz (for MPEG-2) – Sampling frequency of WMA: 22.05 kHz, 32 kHz, 44.1 kHz, 48 kHz • This unit can play back MP3 files recorded in VBR (variable bit rate).
20 ENGLISH Symptom Remedy/Cause Disc playback Disc cannot be played back. Insert the disc correctly. • CD-R/CD-RW cannot be played back. • Tracks on the CD-R/CD-RW cannot be skipped. • Insert a finalized CD-R/CD-RW. • Finalize the CD-R/CD-RW with the component which you used for recording.
21 ENGLISH Symptom Remedy/Cause USB device playback (for KD-R416/KD-R415) Noise is generated. The track played back is not an MP3/WMA track. Skip to another file. (Do not add the extension code <.mp3> or <.wma> to non-MP3 or WMA tracks.) “READING” keeps flashing on the display.
22 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/ Rear: 50 W per channel Continuous Power Output (RMS): Front/ Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
23 ENGLISH CD PLAYER SECTION Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: 5 Hz to 20 000 Hz Dynamic Range: 93 dB Signal-to-Noise Ratio: 98 dB Wow and Flutter: Less than measurable limit MP3 Decoding Format: (MPEG1/2 Audio Layer 3) Max.
ENGLISH GET0623-001A [U/UH] EN, TH 1009DTSMDTJEIN © 2009 Victor Company of Japan, Limited For canceling the display demonstration, see page 4. / CD RECEIVER / KD-R416 / KD-R415 / KD-R316 / KD-R315 INSTRUCTIONS For installation and connections, refer to the separate manual.
1 KD-R416/KD-R415/ KD-R316/KD-R315 Installation/Connection Manual / ENGLISH / 1009DTSMDTJEIN EN, TH © .
2 • The fuse blows. ] Are the red and black leads connected correctly? • Power cannot be turned on. ] Is the yellow lead connected? • No sound from the speakers. ] Is the speaker output lead short-circuited? • “PROTECT” appears on the display and no operation can be done.
Ein wichtiger Punkt beim Kauf des Geräts JVC KD-R316 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC KD-R316 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC KD-R316 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC KD-R316 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC KD-R316 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC KD-R316 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC KD-R316 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC KD-R316. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC KD-R316 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
