Benutzeranleitung / Produktwartung KD-LX100 des Produzenten JVC
Zur Seite of 36
ENGLISH PIM163600 [J] ESP AÑOL FRANÇAIS CD RECEIVER KD-LX100 RECEPT OR CON CD KD-LX100 RECEPTEUR CD KD-LX100 For customer Use: Enter below the Model No. and Serial No. which are located on the top or bottom of the cabinet. Retain this information for future reference.
2 ENGLISH INFORMA TION (For U.S.A.) This equipment has been tested and f ound to comply with the limits for a Class B digital de vice, pursuant to P art 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
3 ENGLISH Thank you f or purchasing a JVC product. Please read all instr uctions carefully bef ore operation, to ensure your complete understanding and to obtain the best possib le performance from the unit. CONTENTS LOCA TION OF THE BUTTONS .........
4 ENGLISH LOCA TION OF THE BUTTONS Control panel * The contr ol panel slides out when you press ON/CLOSE. * When you pr ess OFF/ 0 button, the display panel moves down and the CD loading slot appears.
5 ENGLISH Remote controller 3 • Functions as the PRESET button while listening to the radio . Each time you press the button, the preset station number increases, and the selected station is tuned in. • Functions as the DISC – button while listening to the CD changer .
6 ENGLISH Preparing the remote controller Remote sensor 1) 2) (back side) WARNING: • Stor e the batter ies in a place whic h children cannot r each. If a child accidentally swallo ws the batteries, immediately consult a doctor . • Do not r echar ge, short, disassemble or heat the batteries or dispose of in a fir e.
7 ENGLISH BASIC OPERA TIONS 1 T urn on the power . The display illuminates and the control panel and control dial come out. 2 Select the source. Each time you press the button, the source changes as f.
8 ENGLISH T o stop searching before a station is received, press the same button you have pressed for searching. T o tune in FM stations only with strong signals 1 Press MODE. “MODE” appears on the display , and the number buttons can w ork as different function buttons .
9 ENGLISH Storing stations in memor y Y ou can use one of the f ollowing two methods to store broadcasting stations in memory . • Automatic preset of FM stations: SSM (Strong- station Sequential Mem.
10 ENGLISH Manual preset Y ou can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually . Ex: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band 1 Select the band (FM1). 1 Press SOURCE to select the tuner as the source.
11 ENGLISH Playing a CD 1 Open the loading slot. The display panel moves down, and the loading slot appears. 2 Insert a disc into the loading slot. The unit draws in a CD, the display panel moves up, and CD play star ts automatically . Notes: • When a CD is in the loading slot, selecting “CD” as the sour ce by pressing SOURCE starts CD play .
12 ENGLISH Press and hold ¢ , while playing a CD, to fast-forward the track. Press ¢ briefly , while playing a CD , to go ahead to the beginning of the ne xt track. Each time you press the b utton consecutively , the beginning of the ne xt tracks is located and play ed back.
13 ENGLISH Playing a CD T ext In a CD T ext, some inf or mation about the disc (its disc title, perf or mer and trac k title) is recorded. Y ou can show these disc inf or mation on the displa y .
14 ENGLISH SOUND ADJUSTMENTS Adjusting the sound Y ou can adjust the sound characteristics to your preference . 1 Select the item you want to adjust. Each time y ou press the button, the adjustab le items change as f ollows: Indication T o do: Range BASS Adjust the bass.
15 ENGLISH Using the sound control memory Y ou can select and store a preset sound adjustment suitable f or each playbac k source. (Advanced SCM) Selecting and storing the sound modes Once you select a sound mode , it is stored in memory . It will be recalled e ver y time you select the same source and will be shown on the displa y .
16 ENGLISH Indication For: Preset values Bass T r eble BBE II SCM BEA T Rock or disco +02 00 2 music SCM SOFT Quiet +01 –03 OFF background music SCM POP Light music +04 +01 OFF SCM OFF (Flat sound) 00 00 2 2 1 Recalling the sound modes When “SCM LINK” is set to “LINK ON,” select the source.
17 ENGLISH OTHER MAIN FUNCTIONS 2 1 Changing the general settings (PSM) Y ou can change the items listed on the next page by using the PSM (Pref erred Setting Mode) control. Basic Procedure 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display .
18 ENGLISH 1 3 F actor y-preset settings See page 2 1:00 17 CR UISE OFF BEEP ON 19 BEEP OFF BEEP ON CLOCK ON CLOCK OFF 19 LINK ON LINK OFF 4 types (see page 19) NORMAL 1 9 CR UISE OFF CR UISE 2 CR UISE 1 LINK ON Select. 20 19 AREA US 19 AREA US AREA EU ONCE 19 FLA T OFF Preferred Setting Mode (PSM) items Set.
19 ENGLISH T o cancel Advanced SCM — SCM LINK Y ou can cancel the Advanced SCM (Sound Control Memory), and unlink the sound modes and the playback sources. When shipped from the factory , a different sound mode can be stored in memory for each source so that you can change the sound modes simply by changing the sources.
20 ENGLISH T o select the external component to use — EXT INPUT Y ou can connect the external component to the CD changer jack on the rear using the Line Input Adaptor KS-U57 (not supplied). T o use the external component as the playback source through this unit, you need to select which component — CD changer or external component — to use.
21 ENGLISH 4 Press SEL (select) to finish the setting. When this function is turned on (the CRUISE indicator lights up on the display), the proper volume level is automatically selected among the 3 possible levels according to the driving speed, and the selected lev el is shown on the display .
22 ENGLISH Assigning names to the sources Y ou can assign names to station frequencies and CDs. After assigning a name, it will appear on the display when you select the source.
23 ENGLISH CD CHANGER OPERA TIONS T o fast-for ward or r everse the track T o go to the next track or the previous tracks Playing CDs Select the CD automatic changer . Each time you press the b utton, the source changes as described on page 7. Pla yback starts from the first track of the first disc.
24 ENGLISH T o go to a particular disc directly Press the number b utton corresponding to the disc number to start its playback (while the CD changer is playing). • T o select a disc number from 1 – 6: Press 1 (7) – 6 (12) briefly . • T o select a disc number from 7 – 12: Press and hold 1 (7) – 6 (12) for more than 1 second.
25 ENGLISH T o play back tracks repeatedly (Repeat Play) 1 Press MODE while playing a CD . “MODE” appears on the display . 2 Press RPT (repeat), while “MODE” is still on the displa y , so that the RPT indicator lights up on the displa y .
26 ENGLISH EXTERNAL COMPONENT OPERA TIONS SOURCE KD-LX100 SSM BAND OFF BBE MODE DISP SEL 10 78 9 11 12 INT RPT RND LOCAL MONO SCM 1 Select the external component. Each time you press the button, the source changes as described on page 7. 2 Operate the external component.
27 ENGLISH What appears to be trouble is not alw ays serious . Check the f ollowing points bef ore calling a ser vice centre. Remedies Insert the CD correctly . Stop CD pla y while driving on rough roads. Change the CD . Check the cords and connections.
28 ENGLISH MAINTENANCE COMPACT DIGITAL AUDIO CAUTIONS: • Do not insert 8cm (3 3/16") CDs (single CDs) into the loading slot. (Such CDs cannot be ejected.) • Do not insert any CD of unusual shape – like a heart or flower; otherwise, it will cause a malfunction.
29 ENGLISH SPECIFICA TIONS AUDIO AMPLIFIER SECTION Maximum P ower Output: Front: 45 W per channel Rear: 45 W per channel Continuous P ower Output (RMS): F ront: 17 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distor tion.
EN, SP , FR 1200MNMMDWTKR J V C VICTOR COMPANY OF JAPAN, LIMITED Having TROUBLE with operation? Please reset your unit Refer to page of How to Reset Still having trouble?? USA ONL Y Call 1-800-252-5722 http://www .jvcservice.com W e can help you! http://www .
Om dit apparaat te installeren, dient u eerst de sierplaat op het apparaat te bevestigen, daarna het apparaat in de behuizing te plaatsen en de vier hoeken van de sierplaat aan te drukken. Druk NIET op het paneel (gearceerd in de illustratie aangegeven), anders loopt u het risico dat het paneel niet meer kan worden geopend of gesloten.
IMPOR T ANT Notice the f ollowing inf or mation will help y ou solve the problems . K eep this IMPORT ANT sheet together with the INSTR UCTIONS book. • After installing the unit = F ollow the procedure Å described below . • If the unit does not operate = F ollow the procedure Å described below .
KD-LX300 KD-LX100 Installation/Connection Manual Manual de instalación/conexión Manuel d’installation/raccordement 1200MNMMDWTKR EN, SP , FR J V C FRANÇAIS • Cet appareil est conçu pour f onctionner sur des sources de courant continu de 12 V à masse NEGA TIVE.
Slee ve Cubierta Manchon T r im plate Placa de guarnición Plaque d’assemblage Remote controller Control r emoto Télécommande Rubber cushion Cojín de goma Amor tisseur en caoutchouc Mounting bolt.
ENGLISH FRANÇAIS ESP AÑOL Connecting the leads / Conexión de los conductores / Raccordement des fils T wist the core wires when connecting. Retuerce los alambres de alma para conectarlos.
Usted podrá conectar un amplificador y otros equipos para mejorar el sistema estéreo de su automóvil. Para las conexiones, refiérase a las instrucciones suministradas con cada componente. • Conecte el conductor remoto (azul con rayas blancas) al conductor remoto del otr o equipo para poderlo controlar a través de esta unidad.
Ein wichtiger Punkt beim Kauf des Geräts JVC KD-LX100 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC KD-LX100 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC KD-LX100 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC KD-LX100 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC KD-LX100 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC KD-LX100 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC KD-LX100 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC KD-LX100. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC KD-LX100 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
