Benutzeranleitung / Produktwartung KD-LH1000 des Produzenten JVC
Zur Seite of 39
L VT0855-001A [J] KD-LH1000 1000 D SOUND VOL VOL SOURCE R F U D 200W ENGLISH ESP AÑOL FRANÇAIS CD RECEIVER KD-LH1000 INSTR UCTIONS MANU AL DE INSTR UCCIONES MANUEL D’INSTRUCTIONS RECEPTOR CON CD KD-LH1000 RECEPTEUR CD KD-LH1000 For customer Use: Enter below the Model No .
Errata / Errata / Errata English Page 24 Incorrect Correct Notes: • When you try to assign a name to the 41st disc, “Name Full” a ppear s on the displa y .
2 ENGLISH INFORMA TION (For U.S.A.) This equipment has been tested and f ound to comply with the limits for a Class B digital de vice, pursuant to P ar t 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
3 ENGLISH CONTENTS Thank you f or purchasing a JVC product. Please read all instructions carefully before oper ation, to ensure your complete understanding and to obtain the best possib le performance from the unit. How to reset your unit ............
4 ENGLISH 1 2 3 4 6 9 p 8 5 7 E EQ u y t r e w q i o 200W 1000 D- ; 1 (standby/on/atten uator) button 2 SEL (select) button 3 Control dial 4 Displa y window 5 Number buttons 6 4 / ¢ buttons 7 5 (up) .
5 ENGLISH 1 • T urns on the unit if pressed when the unit is tur ned off . • T urns off the unit if pressed and held f or a fe w seconds. • Drops the volume le vel in a moment if pressed briefly . Press again to resume the volume . 2 • Selects the band while listening to the radio .
6 ENGLISH Preparing the remote controller Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. • Do not expose the remote sensor to strong light (direct sunlight or artificial lighting).
7 ENGLISH T urning on the power 1 T urn on the power . Note on One-T ouch Operation: When you select a sour ce in step 2 below , the power automatically comes on. Y ou do not have to pr ess this button to turn on the power . 2 Select the source. T o operate the tuner (FM or AM), see pages 9 – 13.
8 ENGLISH Changing the display pattern Y ou can change the displa y patter n. The number of the selectable displa y patterns varies according to the pla yback sources .
9 ENGLISH RADIO OPERA TIONS 200W 1000 D- FM1 FM2 FM3 AM Listening to the radio Y ou can use either automatic searching or manual searching to tune in to a par ticular station. Searching a station automatically: Auto search 1 Select the band (FM1 – 3, AM).
10 ENGLISH If the sound quality decreases and the stereo effect is lost while listening to an FM station In some areas, adjacent stations ma y interf ere with each other . If this interf erence occurs, this unit can automatically reduce this interf erence noise (the initial setting when shipped from the f actor y).
11 ENGLISH Manual preset Y ou can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually . Ex.: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band. 1 Select the band (FM1 – 3, AM) y ou want to store stations into (in this example, FM1).
12 ENGLISH T uning in to a preset station Y ou can easily tune in to a preset station. Remember that you must store stations first. If you hav e not stored them yet, see “ Storing stations in memory ” on page 11. Selecting a preset station directly 1 Select the band (FM1 – 3, AM).
13 ENGLISH Changing the display information By pressing DISP (D), you can change the information shown on the displa y . Each time you press the b utton, the display patterns change as f ollows: • W.
14 ENGLISH CD OPERA TIONS 200W 1000 D- Playing a CD 1 Open the control panel. 2 Insert a disc into the loading slot. The unit turns on, dra ws a disc and star ts playbac k automatically . 3 Close the control panel by hand. The opening displa y then source name displa y appears first.
15 ENGLISH Locating a track or a particular portion on a CD T o fast-for ward or reverse the track T o go to the next or previous tracks Press 4 briefly , while pla ying a disc, to go back to the beginning of the current track. Each time you press the button consecutiv ely , the beginning of the previous tracks is located and play ed back.
16 ENGLISH T o play back tracks repeatedly (Repeat Play) Y ou can play bac k the current trac k repeatedly . 1 Press MODE (M) to enter the functions mode while pla ying a disc. “Mode” appears on the display . 2 Press RPT (repeat), while “Mode” is still on the display , so that the RPT indicator is highlighted on the displa y .
17 ENGLISH Notes: • When the disc title/performer is shown, the DISC indicator lights up. When the trac k title is shown, the TR indicator lights up. • If the information cannot be shown at a time, it will scr oll on the display . Some char acters or symbols will not be shown (will be blanked or substituted) on the display .
18 ENGLISH 2 Adjust the level. While adjusting fader and balance —Fad, Bal: Y ou can make these two adjustments at the same time, b y referring to the indication on the displa y . • Press 5 or ∞ to adjust the f ader . • Press ¢ or 4 to adjust the balance.
19 ENGLISH Selecting preset sound modes (iEQ: i-equalizer) Y ou can select a preset sound mode suitable to the music genre . • There is a time limit in doing the follo wing procedure. If the setting is canceled bef ore y ou finish, star t from step 1 again.
20 ENGLISH 4 Make adjustments as y ou like, referring to the table “ Sound adjustment items. ” 1) Press ¢ or 4 to select the frequency band — Lo w , Mid, or High. 2) T urn the control dial to select the center frequency f or the selected band. 3) Press 5 or ∞ to adjust the level of the selected band.
21 ENGLISH Activating the level meter Y ou can show the le vel meters on the displa y while pla ying any source. This unit is equipped with three le vel meter patterns. • There is a time limit in doing the follo wing procedure. If the setting is canceled bef ore y ou finish, star t from step 1 again.
22 ENGLISH OTHER MAIN FUNCTIONS 4 Adjust the PSM item selected. 5 Repeat steps 2 to 4 to adjust the other PSM items if necessary . 6 Finish the setting. T o set clock— Clock Hr , Clock Min Y ou can set the clock using the PSM control. 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the displa y .
23 ENGLISH Preferred Setting Mode (PSM) items The PSM items are grouped into fiv e categories —“ Disp (display), ” “ Cloc k, ” “ T uner , ” “ Color , ” and “ A udio . ” T o select a desired item, first select the categor y where the desired item is listed.
24 ENGLISH T o select the scroll mode — Scroll Y ou can scroll the disc inf or mation if it cannot be displa yed at a time. • Once: Scrolls only once.
25 ENGLISH Changing the display color Y ou can set the display color using the PSM control. By selecting “ Source ” for “ Mode, ” you can select your f av orite color for each source (or f or all sources). Note: When selecting “ User , ” you can cr eate your own color as you like.
26 ENGLISH Selecting or creating your own color — User Y ou can create and store your o wn colors —“ Day ” and “ Night, ” and select one of them as the displa y color for an y desired source. • Day: Can be used as your user color during the day time (while the headlights are tur ned off).
27 ENGLISH 7 Adjust the selected user color . 1) Press ¢ or 4 to select one of three primary colors— “Red” “Green,” and “Blue.” 2) T urn the control dial to adjust the selected primary color . Y ou can adjust within the range of 0 to +11.
28 ENGLISH 4 Select a character . • About the av ailable characters, see page 37. 5 Move the cursor to the next (or previous) character position. 6 Repeat steps 3 to 5 until you finish entering the name. 7 Finish the procedure while the last selected character is flashing.
29 ENGLISH Attaching the control panel 1 Insert the right side of the control panel into the groo ve on the panel holder . 2 Press the left side of the control panel to fix it to the panel holder . Note on cleaning the connectors: If you frequently detac h the contr ol panel, the connectors will deteriorate .
30 ENGLISH CD CHANGER OPERA TIONS W e recommend that you use one of the CH-X series with your unit. If you ha ve another CD automatic changer , consult your JVC car audio dealer f or connections. • F or example, if your CD automatic chang er is one of the KD-MK series, you need a cor d (KS-U15K) for connecting it to this unit.
31 ENGLISH Selecting a disc T o go to a particular disc directly Press the number button corresponding to the disc number to start its playback (while the CD changer is playing). • T o select a disc number from 1 – 6: Press 1 (7) – 6 (12) briefly .
32 ENGLISH T o select a disc using the disc lists If you f orget what discs are loaded in the CD changer , you can sho w the disc title list and select a disc on the list shown on the displa y . • The display can sho w only six disc names at a time.
33 ENGLISH T o play back only intros (Intro Scan) Y ou can play bac k the first 15 seconds of each trac k sequentially . 1 Press MODE (M) to enter the functions mode while playing a disc. “ Mode ” appears on the display . 2 Press INT (intro), while “ Mode ” is still on the display , so that the INT indicator is highlighted on the display .
34 ENGLISH EXTERNAL COMPONENT OPERA TIONS Aux input Playing an external component Y ou can connect the external component to the CD changer jack on the rear using the Line Input Adaptor KS-U57 (not supplied).
35 ENGLISH What appears to be trouble is not alw ays serious. Check the follo wing points bef ore calling a ser vice center . TROUBLESHOOTING Remedies Stop playbac k while driving on rough roads. Change the disc. Check the cords and connections. Adjust it to the optimum le vel.
36 ENGLISH MAINTENANCE Handling CDs This unit has been designed to reproduce CDs, CD-Rs, CD-R Ws and CD T ext. • This unit is not compatible with MP3 discs. How to handle discs When removing a disc from its case, press do wn the center holder of the case and lift the disc out, holding it b y the edges.
37 ENGLISH SPECIFICA TIONS GENERAL Power Requirement: Operating V oltage: DC 14.4 V (11 V to 16 V allow ance) Grounding System: Negative ground Allow able Operating T emperature: 0 ° C to +40 ° C (3.
0202MNMMD W JEIN J V C EN, SP , FR VICTOR COMPANY OF JAPAN, LIMITED Having TROUBLE with operation? Please reset your unit Refer to page of How to Reset Still having trouble?? USA ONL Y Call 1-800-252-5722 http://www .jvc.com W e can help you! http://www .
Ein wichtiger Punkt beim Kauf des Geräts JVC KD-LH1000 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC KD-LH1000 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC KD-LH1000 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC KD-LH1000 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC KD-LH1000 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC KD-LH1000 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC KD-LH1000 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC KD-LH1000. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC KD-LH1000 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
