Benutzeranleitung / Produktwartung KD-DV6101 des Produzenten JVC
Zur Seite of 62
ENGLISH FRANÇAIS DVD/CD RECEIVER RECEPTEUR DVD/CD For canceling the display demonstration, see page 11. Pour annuler la démonstration des affichages, référez-vous à la page 11. For installation and connections, refer to the separate manual. Pour l’installation et les raccordements, se référer au manuel séparé.
2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
3 ENGLISH This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision.
4 ENGLISH How to read this manual The following methods are used to made the explanations simple and easy-to-understand: • Some related tips and notes are explained in “More about this receiver” (see pages 53 – 57). • Button operations are mainly explained with the illustrations as follows: Press briefly.
5 ENGLISH DVD setup menu ............................ 29 Basic setting procedure .......................... 29 Other disc operations ..................... 32 Basic operations ..................................... 32 Changing the display information ..
6 ENGLISH Introduction — Playable discs Discs you can play You can play back the following discs (12 cm and 8 cm) on this receiver: • DVD V id e o : Recorded in PAL color system with Region Code “2” (see below). – DVD-R/DVD-RW recorded in the DVD- Video format can also be played (see page 54).
7 ENGLISH Control panel 1 5 (up) / ∞ (down) buttons • Function as Play / Stop buttons for DVD and VCDs. 2 T/P TP/PTY (traffic programme/programme type) button 3 D DISP (display) button 4 S SEL (se.
8 ENGLISH Remote controller — RM-RK230 Installing the lithium coin battery (CR2025) Before using the remote controller: • Aim the remote controller directly at the remote sensor on the receiver. Make sure there is no obstacle in between. • Do not expose the remote sensor to strong light (direct sunlight or artificial lighting).
9 ENGLISH 5 TOP M (menu) button* 2 • Display the DVD and VCD* 3 disc menu. 6 DUAL button • Activate and deactivate Dual Zone. 7 VOL + / – buttons • Adjusts the volume level. • Also function as 2nd VOL +/– buttons when pressed with SHIFT button.
10 ENGLISH ~ Ÿ You cannot select some sources if they are not ready. ! For FM/AM tuner only For DAB tuner only ⁄ Adjust the volume. Volume level appears. Volume level indicator @ Adjust the sound as you want. (See pages 36 – 38.) To drop the volume in a moment (ATT) To restore the sound, press it again.
11 ENGLISH Canceling the display demonstrations If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON]—see page 39. 1 2 3 4 Finish the procedure. To activate the display demonstration In step 3 above... Setting the clock 1 2 Set the hour and minute.
12 ENGLISH To tune in to a station manually In step ! on the left column... 1 2 Select the desired station frequencies. Radio operations Listening to the radio ~ Ÿ Selected band appears. Lights up when receiving an FM stereo broadcast with sufficient signal strength.
13 ENGLISH When an FM stereo broadcast is hard to receive 1 2 Lights up when monaural mode is activated. Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure. “MONO OFF” appears and the MO indicator goes off.
14 ENGLISH Manual presetting Ex.: Storing FM station of 92.5 MHz into the preset number 4 of the FM1 band. 1 2 3 4 Preset number flashes for a while. To check the current clock time while listening to an FM (non-RDS) or AM station • For FM RDS stations, see page 17.
15 ENGLISH FM RDS operations Searching for your favorite FM RDS programme You can tune in to a station broadcasting your favorite programme by searching for a PTY code. • To store your favorite programme, see page 16. ~ The last selected PTY code appears.
16 ENGLISH What you can do with RDS RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals. By receiving the RDS data, this receiver can do the following: • Programme Type (PTY) Search (see page 15) • Temporarily switches to Traffic Announcement—TA Standby Reception.
17 ENGLISH Tracking the same programme— Network-Tracking Reception When driving in an area where FM reception is not sufficient enough, this receiver automatically tunes in to another FM RDS station of the same network, possibly broadcasting the same programme with stronger signals (see the illustration below).
18 ENGLISH Before performing any operations, make sure the following.... • Turn on the monitor for playing a DVD or VCD. If you turn on the monitor, you can also control the audio CD, CD Text, and MP3/ WMA playback by referring to the monitor screen.
19 ENGLISH • When inserting a DVD disc: • When inserting an MP3/WMA disc: * 1 Either the MP3 or WMA indicator lights up depending on the detected file.
20 ENGLISH Basic operations Operations Display indication and/or next operation To stop play temporarily “PAUSE” illuminates on the display. A still picture appears. A Frame by frame playback B Slow motion playback • No sound comes out during Slow Motion Playback.
21 ENGLISH To locate a particular title/chapter/ track directly • For DVD: During play or pause—select a chapter. During stop—select a title. • For VCD: While PBC (see page 23) is not in use. • For MP3/WMA: Select a track within the same folder.
22 ENGLISH DVD/VCD special functions Selecting subtitles You can select the language of the subtitle to be shown on the monitor. • You can set the initial subtitle language using the setup menu (see page 30).
23 ENGLISH Canceling the PBC playback 1 2 Select a track to start normal playback using the number buttons (see page 9). To resume the PBC function Zoom in 1 2 Move the zoomed-in portion.
24 ENGLISH About the On-Screen Bar You can check the disc information and use some functions through the on-screen bar. • For audio CD, CD Text, and MP3/WMA disc you can also use the control screen and list screen (see pages 27 and 28).
25 ENGLISH To erase the on-screen bar • The selectable options for Repeat/Intro/ Randam plays: OFF Repeat play DVD: OFF CHAP TITLE REPEAT Repeat play VCD (while PBC is not in use): REPEAT (Canceled) MP3/WMA: REPEAT TRACK REPEAT FOLDER (Canceled) CD Text/audio CD: REPEAT TRACK (Canceled) To be continued.
26 ENGLISH INTRO Intro play VCD (while PBC is not in use): (Canceled) INTRO MP3/WMA: INTRO TRACK INTRO FOLDER (Canceled) CD Text/audio CD: INTRO TRACK (Canceled) RANDOM Random play VCD (while PBC is n.
27 ENGLISH To select a folder or track 1 Select “Folder” column or “Track” column on the control screen. 2 Select a folder or track. CD Text/audio CD control screen 1 Elapsed playing time of t.
28 ENGLISH For MP3/WMA: While stop... 1 Display the folder list. Each time you press the button, the list screen comes on and goes off. 2 Select a folder on the list. The track list of the selected folder appears. To go back to the folder list 3 Select a track on the list.
29 ENGLISH You can store the initial disc playback status. • While playing, no change can be made on the setup menu. Basic setting procedure While stop... 1 2 Ex.: When selecting the “AUDIO” menu 3 Select an item you want to set up. Ex.: When selecting “DOWN MIX” 4 5 Select an option.
30 ENGLISH LANGUAGE menu Item Contents MENU LANGUA GE Select the initial disc menu language. AU DIO LANGUAGE Select the initial audio language. SUBTITLE Select the initial subtitle language or erase the subtitle (OFF). ON SCR EEN LANGUA GE Select the language for the Setup menu and some indications shown on the monitor.
31 ENGLISH AUDIO menu Item Contents DIGIT AL A UDIO OUTPUT Select the signal format to be emitted through the DIGITAL OUT (Optical) terminal on the rear. For details, see page 57. • PCM ONLY : Select this when connecting an amplifier or a decoder incompatible with Dolby Digital, DTS, MPEG Audio, or connecting to a recording device.
32 ENGLISH In this section, you can learn how to use the buttons on the control panel in order to operate the DVD/CD player. Basic operations To stop playback To start playback again To eject a disc To fast-forward or reverse the chapter/track Fast-forwards.
33 ENGLISH To go to a chapter/track quickly • For DVD: During play or pause. • For VCD: While PBC (see page 23) is not in use. • For MP3/WMA: Select a track within the same folder. 1 2 First time you press 5 or ∞ button, the chapter/track skips to the nearest higher or lower chapter/track with a number of multiple ten (ex.
34 ENGLISH Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. Repeat play • For DVD: During play or pause.
35 ENGLISH Listening with headphones By connecting headphones to the 2nd AUDIO OUT plug on the rear, you can listen to the playback sound through the DVD/CD player while listening to another source through the speakers. You can activate Dual Zone while listening to any source.
36 ENGLISH Indication pattern for each sound mode: Sound adjustments Selecting preset sound modes You can select a preset sound mode suitable to the music genre. ~ Ÿ Ex.: When “ROCK” is selected HIP HOP POPS ROCK USER CLASSIC JAZZ EN32-39_KD-DV6101[E]3.
37 ENGLISH 4 Select a frequency to adjust. 5 Adjust the level (–05 to +05). 6 Repeat steps 4 and 5 to adjust the other frequency bands. 7 Store the adjustments in the respective mode. Storing your own sound adjustments You can adjust the sound modes and store your own adjustments in memory.
38 ENGLISH Adjusting the sound You can adjust the sound characteristics to your preference. 1 Ex.: When “FAD” is selected 2 Indication pattern changes as you adjust the level. Indication To do: Range FAD* 1 (fader) Adjust the front and rear speaker balance.
39 ENGLISH General settings — PSM Basic procedure You can change PSM (Preferred Setting Mode) items listed in the table that follows. 1 2 Select a PSM item. Ex.: When you select “DIMMER” 3 Adjust the PSM item selected. 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary.
40 ENGLISH Indications Selectable settings, [reference page] AF- REG Alternative frequency/ regionalization reception When the received signals from the current station become weak... AF : [Initial]; Switches to another station (the programme may differ from the one currently received), [17].
41 ENGLISH Indications Selectable settings, [reference page] TEL Telephone muting MUTING 1 / MUTING 2 : Select either one which mutes the sounds while using the cellular phone. OFF : [Initial]; Cancels. SCROLL * 3 Scroll ONCE : [Initial]; Scrolls the disc information once.
42 ENGLISH Assigning titles to the sources You can assign titles to CDs (both in this receiver and in the CD changer). Sources Maximum number of characters DISC/CD-CH Up to 8 characters (up to 30 discs) • You cannot assign a title to a DVD, VCD, CD Text, or an MP3/WMA disc.
43 ENGLISH Detaching the control panel When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power.
44 ENGLISH CD changer operations ~ Ÿ Select a disc. For disc number from 01 – 06: For disc number from 07 – 12: Playing discs in the CD changer About the CD changer It is recommended to use the JVC MP3- compatible CD changer with your receiver. • You can also connect other CH-X series CD changers (except CH-X99 and CH-X100).
45 ENGLISH To be continued... To fast-forward or reverse the track Fast-forwards. Reverses. To go to the next or previous tracks To the following tracks. To the beginning of the current track, then the previous tracks. To go to the next or previous folders (only for MP3 discs) To next folders.
46 ENGLISH 2 First time you press 5 or ∞ button, the track skips to the nearest higher or lower track with a track number of multiple ten (ex. 10th, 20th, 30th). Then each time you press the button, you can skip 10 tracks. • After the last track, the first track will be selected and vice versa.
47 ENGLISH Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. Repeat play Ex.: When “TRK RPT” is selected while playing an MP3 disc Mode Plays repeatedly TRK RP T : The current track.
48 ENGLISH External component operations Playing an external component You can connect an external component to the LINE IN plug on the rear and AUX (auxiliary) input jack on the control panel. • For connection, see Installation/Connection Manual (separate volume).
49 ENGLISH 2 Select the desired ensemble frequencies. What is DAB system? DAB can deliver CD quality sound without any annoying interference and signal distortion. Furthermore, it can carry text, pictures, and data. When transmitting, DAB combines several programmes (called “services”) to form one “ensemble.
50 ENGLISH Storing DAB services in memory You can preset six DAB services (primary) for each band. 1 Perform steps ~ to ⁄ on page 49, to select a service you want. 2 Select the preset number (1 – 6) you want to store into. Preset number flashes for a while.
51 ENGLISH To keep discs clean A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.
52 ENGLISH Language codes Code Language Code Language Code Language AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DZ EL EO ET EU FA FI FJ FO FY GA GD GL GN GU HA HI HR HU HY IA IE Afar A.
53 ENGLISH More about this receiver Basic operations Turning on the power • By pressing SOURCE on the receiver, you can also turn on the power. Selecting the sources • When no disc is loaded in the receiver, “DISC” cannot be selected. • Without connecting to the CD changer or DAB tuner, “CD-CH” or “DAB” cannot be selected.
54 ENGLISH Playing an MP3/WMA disc • This receiver can play back MP3/WMA files with the extension code <.mp3> or <.wma> (regardless of the letter case—upper/lower) recorded in either CD-R/CD-RW or in DVD-R/DVD-RW. • This receiver can show the names of albums, artists (performer), and ID3 Tag (Version 1.
55 ENGLISH To be continued.... • This receiver can recognize the total of 1100 files, 250 folders (maximum of 999 files per folder). • This receiver can play back the files recorded in VBR (variable bit rate). The files recorded in VBR have a discrepancy in elapsed time display, and do not show the actual elapsed time.
56 ENGLISH On-screen guide icons During play, the following guide icons may appear for a while on the monitor. : Appears at the beginning of a scene containing multi-subtitle languages (for DVD only). : Appears at the beginning of a scene containing multi-audio languages (for DVD only).
57 ENGLISH About sounds reproduced through the rear terminals • Through the analog terminals (Speaker out/LINE OUT/2nd AUDIO OUT): 2-channel signal is emitted. When playing a multi-channel encoded disc, multi-channel signals are downmixed. (AUDIO—DOWN MIX: see page 31.
58 ENGLISH Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes Remedies General • Sound cannot be heard from the speakers. The volume level is set to the minimum level.
59 ENGLISH Symptoms Causes Remedies Disc playback • Sound and picture are sometimes interrupted or distorted. You are driving on rough roads. Stop playback while driving on rough roads. Disc is scratched. Change the disc. Connections are incorrect. Check the cords and connections.
60 ENGLISH Symptoms Causes Remedies MP3/WMA playback • Noise is generated. The track played back is not an MP3/WMA file (although it has the extension code <.mp3> or <.wma>). Skip to another track or change the disc. (Do not add the extension code <.
61 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion.
© 2004 Victor Company of Japan, Limited EN, FR 1204DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Vous avez des PROBLÈMES de fonctionnement? Réinitialisez votre appareil Référez-vous à la page intitulée Comment réinitialiser votre appareil Rear003A_KD-DV6101[EU]1.
Ein wichtiger Punkt beim Kauf des Geräts JVC KD-DV6101 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC KD-DV6101 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC KD-DV6101 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC KD-DV6101 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC KD-DV6101 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC KD-DV6101 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC KD-DV6101 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC KD-DV6101. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC KD-DV6101 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
