Benutzeranleitung / Produktwartung HX-Z30 des Produzenten JVC
Zur Seite of 70
GVT0100-001B [J] INSTRUCTIONS HX-Z30 — Consists of CA-HXZ30 and SP-HXZ30 HX-Z10 — Consists of CA-HXZ10 and SP-HXZ10 COMP A CT COMPONENT SYSTEM SP-HXZ30 SP-HXZ30 CA-HXZ30 SP-HXZ10 SP-HXZ10 CA-HXZ10 For Customer Use: Enter below the Model No . and Serial No.
– G-1 – W arnings, Cautions and Others Mises en gar de , précautions et indications diverses CA UTION T o reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture.
– G-2 – For Canada/pour le Canada CA UTION: TO PREVENT ELECTRIC SHOCK, MA TCH WIDE BLADE OF PLUG TO WIDE SLOT , FULL Y INSERT . A TTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQUAU FOND.
1 Introduction About This Manual This manual is org anized as follows: • The manual mainly explains operations using the b uttons and controls on the unit. Y ou can also use the b uttons on the remote control if they ha ve the same or similar names (or marks) as those on the unit.
2 Contents Location of the Buttons and Controls ....................... 3 Front Panel ................................................................. 3 Remote Control .......................................................... 5 Getting Started .....
3 Location of the Buttons and Controls Become familiar with the buttons and controls on your unit. Front Panel Front Panel COMPACT DIGITAL AUDIO CD1 COMPACT COMPONENT SYSTEM STANDBY CD2 CD3 CD4 CD5 EX.
4 Continued Display Window See pages in parentheses for details. Front Panel 1 (standby/on) button and ST ANDBY lamp (9, 24, 25) 2 Disc trays (CD1 – CD5) 3 Remote sensor 4 Display windo w 5 Indicati.
5 When using the remote control, point it at the remote sensor on the front panel. Remote Control Remote Control 1 Number buttons (12, 16, 17) 2 ¢ ( ¡ ) (forw ard skip/forward search) button (12, 16.
6 Getting Started Supplied Accessories Make sure that y ou have all the follo wing items. The number in parentheses indicates the quantity of each piece supplied. • AM loop antenna (1) • FM antenna (1) • Remote control (1) • Batteries (2) If anything is missing, consult your dealer immediately .
7 1 If the cords are co vered with insula tion, r emove a short section of insulation at the end of each cord by twisting and pulling it off. 2 Pr ess and hold the clamp of the AM LOOP terminals on the r ear of the unit. 3 Insert the AM loop antenna to the AM LOOP terminals as illustrated.
8 Connecting Other Equipment Y ou can connect an e xternal audio component used only as a playback de vice. • DO NOT connect any equipment while the power is on.
9 Common Operations T urning On or Off the Power T o turn on the unit, press (or ST ANDBY/ON on the remote control) so that the ST ANDBY lamp goes of f. T o turn off the unit (standby), press (or ST ANDBY/ON on the remote control) again so that the ST ANDBY lamp lights up.
10 T o enjoy heavy sound Y ou can enjoy hea vy sound by using Sound T urbo. This function boosts the low and high fr equency sound. • Acti vating Sound T urbo cancels the sound mode and/or subwoofer adjustment. Press SOUND TURBO. The SOUND TURBO indicator lights up on the display and the SOUND TURBO lamp also flashes.
11 3 Adjust the SEA pattern. 1) Tu r n ¢ / 4 to select the frequency range (B ASS, MID or TRE). 2) Press ¡ or 1 to adjust the lev el (–3 to +3) of the selected frequency range. 3) Repeat steps 1) and 2) to adjust the le vel of the other frequency ranges.
12 Listening to FM and AM Broadcasts T uning in to a Station 1 Pr ess FM/AM. The unit automatically turns on and tunes in to the previousl y received station (either FM or AM). • Each time you press the button, the band alternates between FM and AM.
13 This unit has been designed to play back the following discs: • CD (Audio CD)/CD-R (CD-Recordable)/CD-R W (CD- ReWritable) • MP3 disc (MP3 f iles recorded on a CD-R or CD-R W)* When playing a CD-R or CD-RW User-edited CD-Rs (CD-Recor dable) and CD-R Ws (CD-ReWritable) can be played back only if they ha ve been “finalized .
14 How are MP3 files recorded and played back? MP3 “tracks (f iles)” can be recorded in “group”—folders in PC terminology . During recording, the tracks and groups can be arranged similarly to the tracks and folders of computer data. “Root” is similar to the root of a tree.
15 T rack number Elapsed playing time T racks of the currently playing CD (Track numbers exceeding 16 are not displayed.) CORRECT INCORRECT Group title of the 1st group * Group number flashes CD1 CD2 CD3 CD4 CD5 CD1 CD2 CD3 CD4 CD5 Loading Discs On the unit ONL Y : 1 Pr ess 0 for the disc tray (CD1 – CD5) y ou want to load a disc onto.
16 Continued T rack title ** T rack number Group number Elapsed playing time P R E S E T T U N I N G CD CD P R E S E T T U N I N G T U N I N G /BEEP 4 Select a gr oup and track to start playing. 1) Tu r n ¢ / 4 (or press ¢ ( ¡ ) / 4 ( 1 ) on the remote control) to select a group you want, then press CD 3¥8 .
17 T rack number Disc number Program step number CD PROGRAM Total track number and total playing time (Continuous Play) CD RANDOM CD PLAY MODE DOM PROGRAM PROGRAM CANCEL T APE REC ST ART/STOP 5 SET / .
18 CD PROGRAM Total track number and total playing time (Continuous Play) CD RANDOM Continued CD1 CD2 CD3 CD4 CD5 T U N I N G /BEEP CD PLAY MODE RANDOM PRO REPEA T SOUND TURBO SOUND MODE R ST AR CD 4 .
19 REPEAT REPEAT ALL REPEAT 1DISC REPEAT 1 Canceled CD1 CD2 CD3 CD4 CD5 T U N I N G /BEEP Repeating T racks or Discs—Repeat Play Y ou can hav e all the discs, the program or the indi vidual track currently playing repeat as many times as you lik e. Press REPEA T during or bef ore play .
20 TAPE REVERSE MODE T U N I N G /BEEP T U N I N G /BEEP Playing Back T apes Y ou can play back type I tapes. Playing Back a T ape 1 Pr ess 0 EJECT for the cassette deck. 2 Insert a cassette with the exposed part of the tape down. 3 Close the cassette holder gently .
21 Recording Heads Capstans Pinch rollers REVERSE MODE IMPOR T ANT : • It should be noted that it may be unlawful to re-r ecord pre-r ecorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording , broadcast or cable program and in any literary , dramatic, musical, or artistic embodied therein.
22 Synchronized Recording By using Synchronized Recording, you can start and stop both disc play and tape recording at the same time. Everything on the disc goes onto the tape in the order it is on the disc, or according to the order you ha ve made for Program Play .
23 DAILY Canceled TIMER (Daily Timer setting) TIMER (Recording Timer setting) REC Clock setting (The hour digits start flashing.) CLOCK /TIMER SET / DISPLAY P R E S E T T U N I N G Using the T imers There are three timers a vailable—D AIL Y (Dail y T imer), REC (Recording T imer), and SLEEP (Sleep T imer).
24 1 CD -- 1 TAPE AUX IN TUNER FM TUNER AM SET / DISPLAY CLOCK /TIMER SET / DISPLAY CANCEL / DEMO P R E S E T T U N I N G 5 Tu r n ¢ / 4 to select the source to play , then press SET/DISPLA Y . “SET” appears for about 1 second. • As you turn ¢ / 4 , the source changes as follows: TUNER FM : tunes in to a specified preset FM station.
25 DAILY Canceled TIMER (Daily Timer setting) TIMER (Recording Timer setting) REC Clock setting (The hour digits start flashing.) CLOCK /TIMER SET / DISPLAY P R E S E T T U N I N G Using Recording T imer W ith Recording Timer , you can mak e a tape of a radio broadcast automatically .
26 SLEEP 10 SLEEP 60 SLEEP 30 SLEEP 20 Canceled SLEEP 120 SLEEP 90 Recording T imer Sleep T imer Recording T imer Daily T imer AM 6:00 6:30 7:00 7:30 does not work. CANCEL / DEMO SET / DISPLAY CLOCK /TIMER AUX SLEEP AM 6:00 6:30 7:00 7:30 does not work.
27 Maintenance T o get the best performance from the unit, keep your discs, tapes, and mechanism clean. Handling cassette tapes • If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating. • If the tape is loose, it may get stretched, cut, or caught in the cassette.
28 If you are ha ving a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints gi ven here, or the unit has been physically damag ed, call a qualified person, su ch as your dealer , for service.
29 Specifications Amplifier section—CA-HXZ30 Output Power SUBWOOFERS: 190 W per channel, min. RMS, driven into 6 Ω at 63 Hz with no more than 10% total harmonic distortion. MAIN SPEAKERS: 80 W per channel, min. RMS, dr iven into 6 Ω at 1 kHz with no more than 10% total harmonic distortion.
30 Amplifier section—CA-HXZ10 Output Power SUBWOOFERS: 165 W per channel, min. RMS, driv en into 6 Ω at 63 Hz with no more than 10% total harmonic distortion. MAIN SPEAKERS: 75 W per channel, min. RMS, driven into 6 Ω at 1 kHz with no more than 10% total harmonic distortion.
THIS LIMITED W ARRANTY IS V ALID ONL Y IN THE FIFTY (50) UNITED ST A TES, THE DISTRICT OF COLUMBIA AND IN COMMONWEAL TH OF PUERTO RICO. WHA T WE WILL DO: If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner .
BT -51001-5 (0301) QUALITY SER VICE HOW TO LOCA TE YOUR JVC SERVICE CENTER Dear Customer , In order to receive the most satisfaction from your purchase, please read the instruction booklet before operating the unit.
0203MWMMDWJEM EN VICT OR COMP ANY OF JAP AN, LIMITED 2003 VICTOR COMPANY OF JAPAN, LIMITED cover.HX-Z10&30[J]f 03.2.3, 4:45 PM 2.
GVT0100-002A [C] INSTR UCTIONS MANUEL D’INSTR UCTIONS HX-Z30 — Consists of CA-HXZ30 and SP-HXZ30 HX-Z10 — Consists of CA-HXZ10 and SP-HXZ10 COMP A CT COMPONENT SYSTEM SYSTEME DE COMPOSANTS COMPACT SP-HXZ30 SP-HXZ30 CA-HXZ30 SP-HXZ10 SP-HXZ10 CA-HXZ10 For Customer Use: Enter below the Model No .
– G-1 – W arnings, Cautions and Others Mises en gar de , précautions et indications diverses CA UTION T o reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture.
– G-2 – For Canada/pour le Canada CA UTION: T O PREVENT ELECTRIC SHOCK, MA TCH WIDE BLADE OF PLUG T O WIDE SLO T , FULL Y INSER T . A TTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE D ANS LA BORNE CORRESPOND ANTE DE LA PRISE ET POUSSER JUSQU A U FOND .
1 English Introduction About This Manual This manual is org anized as follows: • The manual mainly explains operations using the b uttons and controls on the unit. Y ou can also use the b uttons on the remote control if they ha ve the same or similar names (or marks) as those on the unit.
2 English Contents Location of the Buttons and Controls ....................... 3 Front Panel ................................................................. 3 Remote Control .......................................................... 5 Getting Started .
3 English Location of the Buttons and Controls Become familiar with the buttons and controls on your unit. Front Panel Front Panel COMPACT DIGITAL AUDIO CD1 COMPACT COMPONENT SYSTEM STANDBY CD2 CD3 CD.
4 English Continued Display Window See pages in parentheses for details. Front Panel 1 (standby/on) button and ST ANDBY lamp (9, 24, 25) 2 Disc trays (CD1 – CD5) 3 Remote sensor 4 Display windo w 5 .
5 English When using the remote control, point it at the remote sensor on the front panel. Remote Control Remote Control 1 Number buttons (12, 16, 17) 2 ¢ ( ¡ ) (forw ard skip/forward search) button.
6 English Getting Started Supplied Accessories Make sure that y ou have all the follo wing items. The number in parentheses indicates the quantity of each piece supplied. • AM loop antenna (1) • FM antenna (1) • Remote control (1) • Batteries (2) If anything is missing, consult your dealer immediately .
7 English 1 If the cor ds are co ver ed with insula tion, r emo ve a short section of insulation at the end of each cord by twisting and pulling it off. 2 Press and hold the c lamp of the AM LOOP ter minals on the rear of the unit. 3 Inser t the AM loop antenna to the AM LOOP terminals as illustrated.
8 English Connecting Other Equipment Y ou can connect an e xternal audio component used only as a playback de vice. • DO NOT connect any equipment while the power is on.
9 English Common Operations T urning On or Off the Power T o turn on the unit, press (or ST ANDBY/ON on the r emote control) so that the ST ANDBY lamp goes of f. T o turn off the unit (standby), press (or ST ANDBY/ON on the remote control) again so that the ST ANDBY lamp lights up.
10 English T o enjoy heavy sound Y ou can enjoy hea vy sound by using Sound T urbo. This function boosts the low and high fr equency sound. • Acti vating Sound T urbo cancels the sound mode and/or subwoofer adjustment. Press SOUND TURBO. The SOUND TURBO indicator lights up on the display and the SOUND TURBO lamp also flashes.
11 English 3 Adjust the SEA pattern. 1) Tu r n ¢ / 4 to select the frequency range (B ASS, MID or TRE). 2) Press ¡ or 1 to adjust the lev el (–3 to +3) of the selected frequency range. 3) Repeat steps 1) and 2) to adjust the le vel of the other frequency ranges.
12 English Listening to FM and AM Broadcasts T uning in to a Station 1 Pr ess FM/AM. The unit automatically turns on and tunes in to the previousl y received station (either FM or AM). • Each time you press the button, the band alternates between FM and AM.
13 English This unit has been designed to play back the following discs: • CD (Audio CD)/CD-R (CD-Recordable)/CD-R W (CD- ReWritable) • MP3 disc (MP3 f iles recorded on a CD-R or CD-R W)* When playing a CD-R or CD-RW User-edited CD-Rs (CD-Recor dable) and CD-R Ws (CD-ReWritable) can be played back only if they ha ve been “finalized .
14 English How are MP3 files recorded and played back? MP3 “tracks (f iles)” can be recorded in “group”—folders in PC terminology . During recording, the tracks and groups can be arranged similarly to the tracks and folders of computer data.
15 English T rack number Elapsed playing time T racks of the currently playing CD (Track numbers exceeding 16 are not displayed.) CORRECT INCORRECT Group title of the 1st group * Group number flashes CD1 CD2 CD3 CD4 CD5 CD1 CD2 CD3 CD4 CD5 Loading Discs On the unit ONL Y : 1 Pr ess 0 for the disc tray (CD1 – CD5) y ou want to load a disc onto.
16 English Continued T rack title ** T rack number Group number Elapsed playing time P R E S E T T U N I N G CD CD P R E S E T T U N I N G T U N I N G /BEEP 4 Select a gr oup and track to start playing. 1) Tu r n ¢ / 4 (or press ¢ ( ¡ ) / 4 ( 1 ) on the remote control) to select a group you want, then press CD 3¥8 .
17 English T rack number Disc number Program step number CD PROGRAM Total track number and total playing time (Continuous Play) CD RANDOM CD PLAY MODE DOM PROGRAM PROGRAM CANCEL T APE REC ST ART/STOP .
18 English CD PROGRAM Total track number and total playing time (Continuous Play) CD RANDOM Continued CD1 CD2 CD3 CD4 CD5 T U N I N G /BEEP CD PLAY MODE RANDOM PRO REPEA T SOUND TURBO SOUND MODE R ST .
19 English REPEAT REPEAT ALL REPEAT 1DISC REPEAT 1 Canceled CD1 CD2 CD3 CD4 CD5 T U N I N G /BEEP Repeating T racks or Discs—Repeat Play Y ou can hav e all the discs, the program or the indi vidual track currently playing repeat as many times as you lik e.
20 English TAPE REVERSE MODE T U N I N G /BEEP T U N I N G /BEEP Playing Back T apes Y ou can play back type I tapes. Playing Back a T ape 1 Pr ess 0 EJECT for the cassette deck. 2 Insert a cassette with the exposed part of the tape down. 3 Close the cassette holder gently .
21 English Recording Heads Capstans Pinch rollers REVERSE MODE IMPOR T ANT : • It may be unlawful to record or pla yback copyrighted material without the consent of the copyright owner .
22 English Synchronized Recording By using Synchronized Recording, you can start and stop both disc play and tape recording at the same time. Everything on the disc goes onto the tape in the order it is on the disc, or according to the order you ha ve made for Program Play .
23 English DAILY Canceled TIMER (Daily Timer setting) TIMER (Recording Timer setting) REC Clock setting (The hour digits start flashing.) CLOCK /TIMER SET / DISPLAY P R E S E T T U N I N G Using the T imers There are three timers a vailable—D AIL Y (Dail y T imer), REC (Recording T imer), and SLEEP (Sleep T imer).
24 English 1 CD -- 1 TAPE AUX IN TUNER FM TUNER AM SET / DISPLAY CLOCK /TIMER SET / DISPLAY CANCEL / DEMO P R E S E T T U N I N G 5 Tu r n ¢ / 4 to select the source to play , then press SET/DISPLA Y . “SET” appears for about 1 second. • As you turn ¢ / 4 , the source changes as follows: TUNER FM : tunes in to a specified preset FM station.
25 English DAILY Canceled TIMER (Daily Timer setting) TIMER (Recording Timer setting) REC Clock setting (The hour digits start flashing.) CLOCK /TIMER SET / DISPLAY P R E S E T T U N I N G Using Recording T imer W ith Recording Timer , you can mak e a tape of a radio broadcast automatically .
26 English SLEEP 10 SLEEP 60 SLEEP 30 SLEEP 20 Canceled SLEEP 120 SLEEP 90 Recording T imer Sleep T imer Recording T imer Daily T imer AM 6:00 6:30 7:00 7:30 does not work. CANCEL / DEMO SET / DISPLAY CLOCK /TIMER AUX SLEEP AM 6:00 6:30 7:00 7:30 does not work.
27 English Maintenance T o get the best performance from the unit, keep your discs, tapes, and mechanism clean. Handling cassette tapes • If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating.
28 English If you are ha ving a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints gi ven here, or the unit has been physically damag ed, call a qualified person, su ch as your dealer , for service.
29 English Specifications Amplifier section—CA-HXZ30 Output Power SUBWOOFERS: 190 W per channel, min. RMS, driven into 6 Ω at 63 Hz with no more than 10% total harmonic distortion. MAIN SPEAKERS: 80 W per channel, min. RMS, dr iven into 6 Ω at 1 kHz with no more than 10% total harmonic distortion.
30 English Amplifier section—CA-HXZ10 Output Power SUBWOOFERS: 165 W per channel, min. RMS, driv en into 6 Ω at 63 Hz with no more than 10% total harmonic distortion. MAIN SPEAKERS: 75 W per channel, min. RMS, driven into 6 Ω at 1 kHz with no more than 10% total harmonic distortion.
0203MWMMDWJEM EN, FR VICT OR COMP ANY OF JAP AN, LIMITED 2003 VICTOR COMPANY OF JAPAN, LIMITED cover.HX-Z10&30[C]f 03.2.18, 6:38 PM 2.
Ein wichtiger Punkt beim Kauf des Geräts JVC HX-Z30 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC HX-Z30 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC HX-Z30 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC HX-Z30 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC HX-Z30 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC HX-Z30 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC HX-Z30 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC HX-Z30. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC HX-Z30 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
