Benutzeranleitung / Produktwartung GET0266-003A des Produzenten JVC
Zur Seite of 84
ENGLISH FRANÇAIS CD RECEIVER RECEPTEUR CD KD-G612/KD-G611/KD-G511 For installation and connections, refer to the separate manual. Pour l’installation et les raccordements, se référer au manuel séparé. INSTRUCTIONS MANUEL D’INSTRUCTIONS GET0266-003A [EX/EU] For canceling the display demonstration, see page 8.
2 ENGLISH How to forcibly eject a disc If a disc cannot be recognized by the receiver or cannot be ejected, ejects the disc as follows. “PLEASE” and “EJECT” appear alternately on the display. • If this does not work, try to reset your receiver.
3 ENGLISH How to reset your unit ........................... 2 How to forcibly eject a disc ................... 2 How to read this manual ........................ 4 How to use the M MODE button ........... 4 Control panel — KD-G612/KD-G611/KD-G511 .
4 ENGLISH How to read this manual The following methods are used to made the explanations simple and easy-to-understand: • Some related tips and notes are explained in “More about this receiver” (see pages 31 – 33). • Button operations are mainly explained with the illustrations as follows: Press briefly.
5 ENGLISH Control panel — KD-G612/KD-G611/KD-G511 1 5 (up) / ∞ (down) buttons 2 T/P TP/PTY (traffic programme/programme type) button 3 D DISP (display) button 4 S SEL (select) button 5 • Control.
6 ENGLISH Remote controller — RM-RK50 Main elements and features 1 (standby/on/attenuator) button • Turns on and off the power and also attenuates the sound. 2 5 U (up) / D (down) ∞ buttons • 5 U: Changes the FM/AM/DAB bands. • D ∞ : Changes the preset stations (or services).
7 ENGLISH ~ Ÿ You cannot select some sources if they are not ready. * Only for KD-G612/KD-G611. ! • For FM/AM tuner only • For DAB tuner only ⁄ Volume level appears. Volume level indicator @ Adjust the sound as you want. (See pages 20 and 21.) To drop the volume in a moment (ATT) To restore the sound, press it again.
8 ENGLISH Canceling the display demonstrations If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON]—see page 22. 1 2 3 4 Finish the procedure. To activate the display demonstration In step 3 above... Setting the clock 1 2 Set the hour, minute, and clock system.
9 ENGLISH To tune in to a station manually In step ! on the left... 1 2 Select the desired station frequencies. When an FM stereo broadcast is hard to receive 1 2 Lights up when monaural mode is activated. Reception improves, but stereo effect will be lost.
10 ENGLISH 2 3 4 Preset number flashes for a while. Listening to a preset station 1 2 3 Select the preset station (1 – 6) you want. To check the current clock time while listening to an FM (non-RDS) or AM station • For FM RDS stations, see page 13.
11 ENGLISH FM RDS operations Searching for your favorite FM RDS programme You can tune in to a station broadcasting your favorite programme by searching for a PTY code. ~ The last selected PTY code appears. Ÿ Select one of your favorite programme type.
12 ENGLISH What you can do with RDS RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals.
13 ENGLISH Tracking the same programme— Network-Tracking Reception When driving in an area where FM reception is not sufficient enough, this receiver automatically tunes in to another FM RDS station of the same network, possibly broadcasting the same programme with stronger signals (see the illustration below).
14 ENGLISH Disc operations Playing a disc in the receiver About MP3 and WMA discs MP3 and WMA (Windows Media ® Audio) “tracks” (words “file” and “track” are used interchangeably) are recorded in “folders.” • When inserting an MP3 or a WMA disc: * Either the MP3 or WMA indicator lights up depending on the detected file.
15 ENGLISH ~ * If you have changed “EXT IN” setting to “EXT IN” (see page 24), you cannot select the CD changer. Ÿ Select a disc. For disc number from 01 – 06: For disc number from 07 – 12: Playing discs in the CD changer About the CD changer It is recommended to use the JVC MP3- compatible CD changer with your receiver.
16 ENGLISH To fast-forward or reverse the track Fast-forwards. Reverses. To go to the next or previous tracks To the following tracks. To the beginning of the current track, then the previous tracks. To go to the next or previous folders (only for MP3 or WMA discs) For MP3 discs: For WMA discs: To next folders.
17 ENGLISH To locate a particular track (for CD) or folder (for MP3 or WMA discs) directly To select a number from 01 – 06: To select a number from 07 – 12: • To use folder search on MP3/WMA discs, it is required that folders are assigned with 2-digits number at the beginning of their folder names—01, 02, 03, and so on.
18 ENGLISH Changing the display information While playing an audio CD or a CD Text ( / ) * 1 For KD-G612/KD-G611: If no title is assigned to an audio CD, “NO NAME” appears. To assign a title to an audio CD, see page 25. For KD-G511: “NO NAME” appears.
19 ENGLISH Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. Repeat play Ex.: When “TRK RPT” is selected while playing an MP3 disc in the receiver Mode Plays repeatedly TRK RP T : The current track.
20 ENGLISH Sound adjustments Selecting preset sound modes (C-EQ: custom equalizer) You can select a preset sound mode suitable to the music genre. ~ Ÿ Ex.
21 ENGLISH Adjusting the sound You can adjust the sound characteristics to your preference. 1 Ex.: When “TRE” is selected 2 Indication pattern changes as you adjust the level. Indication To do: Range BAS* 1 (bass) Adjust the bass. –06 (min.) to +06 (max.
22 ENGLISH General settings — PSM Basic procedure You can change PSM (Preferred Setting Mode) items listed in the table that follows. 1 2 Select a PSM item. Ex.: When you select “DIMMER” 3 Adjust the PSM item selected. 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary.
23 ENGLISH To be continued... Indications Selectable settings, [reference page] AF- REG Alternative frequency/ regionalization reception When the received signals from the current station become weak... AF: [Initial]; Switches to another station (the programme may differ from the one currently received), [13].
24 ENGLISH Indications Selectable settings, [reference page] TEL Telephone muting MUTING 1 / MUTING 2 : Select either one which mutes the sounds while using the cellular phone. OFF : [Initial]; Cancels. SCROLL * 1 Scroll ONCE: [Initial]; Scrolls the disc information once.
25 ENGLISH Assigning titles to the sources This section is only for KD-G612/KD-G611. You can assign titles to CDs (both in this receiver and in the CD changer). Sources Maximum number of characters CDs/CD-CH Up to 32 characters (up to 30 discs) * You cannot assign a title to a CD Text or an MP3/WMA disc.
26 ENGLISH Detaching the control panel When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power.
27 ENGLISH External component operations Playing an external component Fo r K D- G612/KD-G611: You can connect an external component to the CD changer jack on the rear using the Line Input Adapter KS-U57 (not supplied), and another to the AUX (auxiliary) input jack on the control panel.
28 ENGLISH 2 Select the desired ensemble frequencies. What is DAB system? DAB can deliver CD quality sound without any annoying interference and signal distortion. Furthermore, it can carry text, pictures, and data. When transmitting, DAB combines several programmes (called “services”) to form one “ensemble.
29 ENGLISH Storing DAB services in memory You can preset six DAB services (primary) for each band. 1 Perform steps ~ to ⁄ on page 28, to select a service you want. 2 Select the preset number (1 – 6) you want to store into. Preset number flashes for a while.
30 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
31 ENGLISH More about this receiver Basic operations Turning on the power • By pressing SOURCE on the receiver, you can also turn on the power. Turning off the power • If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power.
32 ENGLISH Playing a CD-R or CD-RW • Use only “finalized” CD-Rs or CD-RWs. • This receiver can play back only the files of the same type which is first detected if a disc includes both audio CD (CD-DA) files and MP3/WMA files. • This receiver can play back multi-session discs; however, unclosed sessions will be skipped while playing.
33 ENGLISH • This receiver can recognize the total of 512 files, of 200 folders, and of 8 hierarchies. • This receiver can play back the files recorded in VBR (variable bit rate). The files recorded in VBR have a discrepancy in elapsed time display, and do not show the actual elapsed time.
34 ENGLISH Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes Remedies General • Sound cannot be heard from the speakers. The volume level is set to the minimum level.
35 ENGLISH Symptoms Causes Remedies MP3/WMA playback • Disc cannot be played back. No MP3/WMA tracks are recorded on the disc. Change the disc. MP3/WMA tracks do not have the extension code <.mp3> or <.wma> in their file names. Add the extension code <.
36 ENGLISH Symptoms Causes Remedies CD changer • “NO DISC” appears on the display. No disc is in the magazine. Insert disc into the magazine. Disc is inserted upside down. Insert disc correctly. • “NO MAG” appears on the display. No magazine is loaded in the CD changer.
37 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion.
© 2004 Victor Company of Japan, Limited EN, FR 1104DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Vous avez des PROBLÈMES de fonctionnement? Réinitialisez votre appareil Référez-vous à la page intitulée Comment réinitialiser votre appareil Rear_KD-G612[EX_EU]1.
KD-G612/KD-G611/KD-G511 Installation/Connection Manual Manuel d’installation/raccordement 1104DTSMDTJEIN EN, FR J Handles Poignées F Washer (ø5) Rondelle (ø5) G Lock nut (M5) Ecrou d’arrêt (M5.
When installing the receiver without using the sleeve / Lors de l’installation de l’appareil scans utiliser de manchon In a Toyota for example, first remove the car radio and install the receiver in its place. Par exemple dans une Toyota, retirer d’abord l’autoradio et installer l’appareil à la place.
3 A Typical Connections / Raccordements typiques Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this receiver. The leads of the power cord and those of the connector from the car body may be different in color.
4 External Component / Appareil extérieur * 6 Line Input Adapter KS-U57 (not supplied for this receiver) * 6 Adaptateur d’entrée de ligne KS-U57 (non fourni avec cet autoradio) KS - U 5 7 * 6 B Connecting the external amplifiers / Connexion d’amplificateurs extérieurs You can connect amplifiers to upgrade your car stereo system.
ENGLISH Р УCCKИЙ CD RECEIVER РЕСИВЕР С ПРОИГРЫВАТЕЛЕМ КОМПАКТ-ДИСКОВ KD-G617 For installation and connections, refer to the separate manual. Указания по установке и выполнению соединений приводятся в отдельной инст рукции.
2 ENGLISH How to forcibly eject a disc If a disc cannot be recognized by the receiver or cannot be ejected, ejects the disc as follows. “PLEASE” and “EJECT” appear alternately on the display. • If this does not work, reset your receiver. • Be careful not to drop the disc when it ejects.
3 ENGLISH How to reset your unit ........................... 2 How to forcibly eject a disc ................... 2 How to read this manual ........................ 4 How to use the M MODE button ........... 4 Control panel — KD-G617 ......... 5 Parts identification .
4 ENGLISH How to read this manual The following methods are used to make the explanations simple and easy-to-understand: • Some related tips and notes are explained in “More about this receiver” (see pages 31 – 33). • Button operations are mainly explained with the illustrations as follows: Press briefly.
5 ENGLISH Control panel — KD-G617 1 5 (up) / ∞ (down) buttons 2 T/P TP/PTY (traffic programme/programme type) button 3 D DISP (display) button 4 S SEL (select) button 5 • Control dial • (stand.
6 ENGLISH Remote controller — RM-RK50 Main elements and features 1 (standby/on/attenuator) button • Turns on and off the power and also attenuates the sound. 2 5 U (up) / D (down) ∞ buttons • 5 U: Changes the FM/AM/DAB bands. • D ∞ : Changes the preset stations (or services).
7 ENGLISH ~ Ÿ You cannot select some sources if they are not ready. ! • For FM/AM tuner only • For DAB tuner only ⁄ Volume level appears. Volume level indicator @ Adjust the sound as you want. (See pages 20 and 21.) To drop the volume in a moment (ATT) To restore the sound, press it again.
8 ENGLISH Canceling the display demonstrations If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON]—see page 22. 1 2 3 4 Finish the procedure. To activate the display demonstration In step 3 above... Setting the clock 1 2 Set the hour, minute, and clock system.
9 ENGLISH To tune in to a station manually In step ! on the left... 1 2 Select the desired station frequencies. When an FM stereo broadcast is hard to receive 1 2 Lights up when monaural mode is activated. Reception improves, but stereo effect will be lost.
10 ENGLISH 2 3 4 Preset number flashes for a while. Listening to a preset station 1 2 3 Select the preset station (1 – 6) you want. To check the current clock time while listening to an FM (non-RDS) or AM station • For FM RDS stations, see page 13.
11 ENGLISH FM RDS operations Searching for your favorite FM RDS programme You can tune in to a station broadcasting your favorite programme by searching for a PTY code. • To store your favorite programme, see page 12. ~ The last selected PTY code appears.
12 ENGLISH What you can do with RDS RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals. By receiving the RDS data, this receiver can do the following: • Programme Type (PTY) Search (see page 11) • Temporarily switches to Traffic Announcement—TA Standby Reception.
13 ENGLISH Tracking the same programme— Network-Tracking Reception When driving in an area where FM reception is not sufficient enough, this receiver automatically tunes in to another FM RDS station of the same network, possibly broadcasting the same programme with stronger signals (see the illustration below).
14 ENGLISH Disc operations Playing a disc in the receiver About MP3 and WMA discs MP3 and WMA (Windows Media ® Audio) “tracks” (words “file” and “track” are used interchangeably) are recorded in “folders.” • When inserting an MP3 or a WMA disc: * Either the MP3 or WMA indicator lights up depending on the detected file.
15 ENGLISH ~ * If you have changed “EXT IN” setting to “EXT IN” (see page 24), you cannot select the CD changer. Ÿ Select a disc. For disc number from 01 – 06: For disc number from 07 – 12: Playing discs in the CD changer About the CD changer It is recommended to use the JVC MP3- compatible CD changer with your receiver.
16 ENGLISH To fast-forward or reverse the track Fast-forwards. Reverses. To go to the next or previous tracks To the following tracks. To the beginning of the current track, then the previous tracks. To go to the next or previous folders (only for MP3 or WMA discs) For MP3 discs: For WMA discs: To next folders.
17 ENGLISH To locate a particular track (for CD) or folder (for MP3 or WMA discs) directly To select a number from 01 – 06: To select a number from 07 – 12: • To use folder search on MP3/WMA discs, it is required that folders are assigned with 2-digit numbers at the beginning of their folder names—01, 02, 03, and so on.
18 ENGLISH Changing the display information While playing an audio CD or a CD Text ( / ) * 1 If no title is assigned to an audio CD, “NO NAME” appears.
19 ENGLISH Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. Repeat play Ex.: When “TRK RPT” is selected while playing an MP3 disc in the receiver Mode Plays repeatedly TRK RP T : The current track.
20 ENGLISH Sound adjustments Selecting preset sound modes (C-EQ: custom equalizer) You can select a preset sound mode suitable to the music genre. ~ Ÿ Ex.
21 ENGLISH Adjusting the sound You can adjust the sound characteristics to your preference. 1 Ex.: When “TRE” is selected 2 Indication pattern changes as you adjust the level. Indication To do: Range BAS* 1 (bass) Adjust the bass. –06 (min.) to +06 (max.
22 ENGLISH General settings — PSM Basic procedure You can change PSM (Preferred Setting Mode) items listed in the table that follows. 1 2 Select a PSM item. Ex.: When you select “DIMMER” 3 Adjust the PSM item selected. 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary.
23 ENGLISH To be continued... Indications Selectable settings, [reference page] AF- REG Alternative frequency/ regionalization reception When the received signals from the current station become weak... AF : [Initial]; Switches to another station (the programme may differ from the one currently received), [13].
24 ENGLISH Indications Selectable settings, [reference page] TEL Telephone muting MUTING 1 / MUTING 2 : Select either one which mutes the sounds while using the cellular phone. OFF : [Initial]; Cancels. SCROLL * 1 Scroll ONCE : [Initial]; Scrolls the disc information once.
25 ENGLISH Assigning titles to the sources You can assign titles to CDs (both in this receiver and in the CD changer). Sources Maximum number of characters CDs/CD-CH Up to 32 characters (up to 30 discs) * You cannot assign a title to a CD Text or an MP3/WMA disc.
26 ENGLISH Detaching the control panel When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power.
27 ENGLISH External component operations Playing an external component P ortable MD player , etc. You can connect an external component to the CD changer jack on the rear using the Line Input Adapter KS-U57 (not supplied), and another to the AUX (auxiliary) input jack on the control panel.
28 ENGLISH 2 Select the desired ensemble frequencies. What is DAB system? DAB can deliver CD quality sound without any annoying interference and signal distortion. Furthermore, it can carry text, pictures, and data. When transmitting, DAB combines several programmes (called “services”) to form one “ensemble.
29 ENGLISH Storing DAB services in memory You can preset six DAB services (primary) for each band. 1 Perform steps ~ to ⁄ on page 28, to select a service you want. 2 Select the preset number (1 – 6) you want to store into. Preset number flashes for a while.
30 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
31 ENGLISH More about this receiver Basic operations Turning on the power • By pressing SOURCE on the receiver, you can also turn on the power. Selecting the sources • When no disc is loaded in the receiver, “CD” cannot be selected. • Without connecting to the CD changer or DAB tuner, “CD-CH” or “DAB” cannot be selected.
32 ENGLISH Playing a CD-R or CD-RW • Use only “finalized” CD-Rs or CD-RWs. • This receiver can play back only the files of the same type which is first detected if a disc includes both audio CD (CD-DA) files and MP3/WMA files. • This receiver can play back multi-session discs; however, unclosed sessions will be skipped while playing.
33 ENGLISH • This receiver can recognize the total of 512 files, of 200 folders, and of 8 hierarchies. • This receiver can play back the files recorded in VBR (variable bit rate). The files recorded in VBR have a discrepancy in elapsed time display, and do not show the actual elapsed time.
34 ENGLISH Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes Remedies General • Sound cannot be heard from the speakers. The volume level is set to the minimum level.
35 ENGLISH Symptoms Causes Remedies MP3/WMA playback • Disc cannot be played back. No MP3/WMA tracks are recorded on the disc. Change the disc. MP3/WMA tracks do not have the extension code <.mp3> or <.wma> in their file names. Add the extension code <.
36 ENGLISH Symptoms Causes Remedies CD changer • “NO DISC” appears on the display. No disc is in the magazine. Insert disc into the magazine. Disc is inserted upside down. Insert disc correctly. • “NO MAG” appears on the display. No magazine is loaded in the CD changer.
37 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion.
© 2005 Victor Company of Japan, Limited EN, RU 0105DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Затруднения при эксплу.
KD-G617 Installation/Connection Manual Ру к ов одс т во по у с тановк е / подк лючению 0105DTSMDTJEIN EN, RU J Handles Рычаги F Washer (ø5) Шайба (њ5) G L.
When installing the receiver without using the sleeve / При у стано вке устрой ства без использования му фты In a Toyota for example, first remove the car radio and install the receiver in its place.
3 A Typical Connections / Т ипичные подключе ния Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this receiver. The leads of the power cord and those of the connector from the car body may be different in color.
4 External Component / Внешнее устройство * 6 Line Input Adapter KS-U57 (not supplied for this receiver) * 6 Коммуникационный адаптер KS-U57 (не вх о ди.
Ein wichtiger Punkt beim Kauf des Geräts JVC GET0266-003A (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC GET0266-003A noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC GET0266-003A - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC GET0266-003A reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC GET0266-003A erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC GET0266-003A besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC GET0266-003A verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC GET0266-003A. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC GET0266-003A gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
