Benutzeranleitung / Produktwartung FS-X3 des Produzenten JVC
Zur Seite of 66
SP-FSX1 CA-FSX1 SP-FSX1 SP-FSX3 CA-FSX3 SP-FSX3 COMP A CT COMPONENT SYSTEM For Customer Use: Enter below the Model No . and Serial No. which are located either on the rear , bot- tom or side of the cabinet. Retain this information for future r eference.
G-1 W arnings, Cautions and Others CA U TION T o reduce the risk of e lectrical shocks , fire, etc.: 1. Do not remove scre ws, cov ers or cabinet. 2. Do not expose this appliance to rain or moisture. Caution –– ST ANDBY/ON button! Disconnect the main plug to shu t the power off completely .
G-2 Caution: Proper V entilation T o avoid risk of electric shock and fire , and to prev ent damage, locate the apparatus as f ollows: 1 F r ont: No obstructions and open spacing. 2 Sides/ T op/ Back: No obstructions should be placed in the areas shown by the dimensions below .
1 English Introduction Thank you for purchasing the JVC Compact Component System. We hope it will be a valued addition to your home, giving you years of enjoyment. Be sure to read this instruction manual carefully befo re operating your new stereo system.
2 Table of Contents English Introduction .............................................. .......................................................... 1 Features ............. ................. ................ ................. ................. ........
Table of Contents 3 English Setting the Daily Timer ................. ................. ................. ................... ................. ................. .... 23 Setting the SLEEP Timer .............. ................. ................. ......
4 English Getting Started Accessories Make sure that you have all of the following items, which are supplied with the System. FM Wire Antenna (1) AM Loop Antenna (1) Remote Control (1) Batteries (2) Speaker Cords (2) AC plug adaptor (1) If any of these items are missing, contact your dealer immediately.
5 Getting Started English CAUTI ON: • Make all connecti ons before plugging the Syst em into an AC power outlet. Connecting the FM Antenna Rear Panel of the Center Unit (CA-FSX1/CA-FSX3) Using the Supplied Wire Antenna • Fasten it up in the position until you ha ve the best reception.
6 Getting Started English Connecting the AM Antenna Rear Panel of the Center Unit (CA- FSX1/CA-FSX3) • If the AM loop antenna wire is covered with vinyl, remove the vinyl by twisting it as shown in the diagram. • Make sure the antenna conductors do not t ouch any other terminals, connecting cords and power cord.
7 Getting Started English Connecting the Speakers (SP-FSX1/SP-FSX3) These speakers are exclusively for this system . Using with other devices will damage the speakers. Connect the speaker cords between the speaker terminals of the Unit and those of the Speakers.
8 Getting Started English Removing the Speaker Grills (SP-FSX1) The speaker grills can be removed. When removing: 1. Pull the bottom towards you with your fingers. 2. Also pull the to p towards you. When attaching the speaker grills: Attach the speaker grills as shown in the diagram .
9 Getting Started English Connecting an MD Recorder, etc (Optical Digital Output) Unplug the cap and connect an optical digital cord (not supplied) between the System ’ s OPTICAL DIGITAL OUT terminal and the input terminal of the MD recorder, etc. You can record the digital output signal from the System ’ s CD Player t o the MD recorder, etc.
10 English Basic Operations Turning the Power On and Off Turning the System On Press the STANDBY/ON button. The display comes on and “ HELLO ” is displayed once. The STANDBY/ON indicator lights in green . The System comes on ready to continue in the mode it was in when the power was last turned off.
11 Basic Operations English Adjusting the Bright ness (DIMMER - at Power On) You can adjust the brightness of the display. When the System is Turned On At power on, each time you press the DIMMER butt.
12 Basic Operations English Tone Control (BASS/TREBLE) You can control the tone by changing the bass (low frequen- cy) and treble (high frequency). On the Remote Control 1 Press the B ASS/TREBLE button. Each time you press the button, the Tone Control mode changes as follows.
13 English Using the Tuner You can listen to FM and AM stations. Stati ons can be tuned in manually, automatically, or from preset memo ry storage. ❑ Before listening to the radio: • Make sure that both the FM and AM antennas are cor- rectly connected.
14 Using the Tuner English ● Preset Tuning using the Remote Control (Possible only after presetting stations) Select the desired preset number using the 3 or 2 button on the Remote Control. The display will show the preset number ’ s band and frequency.
15 Using the Tune r English Beat Cut (AM Reception) Switching the Beat Cut mode may reduce beat noise. Each time you press the FM/PLAY MODE button while re- ceiving an AM broadcast, the Beat Cut mode changes as fol- lows. BEAT CUT 1 = BEAT CUT 2 = BEAT CUT 3 = BEAT CUT 4 = (back to the beginning) Set to the position where beat noise is small.
16 English Using the CD Player You can use Normal, Random, Program or Repeat Play. Re- peat Play can repeat all the tracks or just one of the tracks on the CD. Here are the basic things you need to know to play a CD and locate the different tracks on it.
17 Using the CD Player English ❑ You can insert a CD while listening to the other source. • Howe ver , while the CD door is operating (opening or closing), the other source will be muted. CAUTI ON: • DO NOT try to open or close the CD door by hands as it will be damaged.
18 Using the CD Player English 5 Press the Numeric Keys to enter the track n umber you want to pr ogram (See page 12). The program order number will be assigned from “ 1 ” , if nothing is programmed yet. Example: • T o dele te the last e ntry , press the C ANCEL butt on.
19 Using the CD Player English Repeating Tracks You can repeat all tracks or individual track, as many times as you like. During playback or in Stop mode, press the RE- PEAT button on the Remote Contro l. Each time you press the button, the Repeat mode and Re- peat indicator c hange as follows.
20 English Using External Equipments Listening to External Equipment You can listen to the external equipment such as M D re- corder, tape deck or other auxiliary. ❑ First make sure that the external equipment is properly connected to the System. (See page 8).
21 Using External Equipments English Recording the System ’ s Source to External Equipment You can record t he System ’ s source to external equipment which is connected to the LINE OUT or OPTICAL DIGI- TAL OUT termin al of the System, such as ta pe deck or MD recorder, etc.
22 English Using the Timers The timers let you control listening functions automatically. Two types of timers are available: DAILY Timer Use this timer to se t wake up everyday to music from any source, including melodies. SLEEP Timer Fall asleep and have your System turn off automatically after a certain length of time.
23 Using the Timers English 3 Press the SET button. The minute digits of the time in dication blink on the dis- play. • To return to the hour setting, press the CANCEL button. 4 Press the 3 or 2 button to set the minute. 5 Press the SET button. “ ADJUST OK! ” appears on the display.
24 Using the Timers English On the Remote Control 1 Press the CLOCK/TI MER button repeat- edly until “ ON (time) ” appears on the display. At this time, “ DAILY ” indicator blinks on the display. Each time you press the button, the display changes as follows.
25 Using the Timers English 5 Setting the volume level. Press the 3 or 2 button to select the vo lume level (VOLUME 1-50), then press the SET button. 6 Select the FADE function. Press the 3 or 2 button to select either “ FADE ” (fades in at power on) or “ NoFADE ” (does not fade in).
26 Using the Timers English Setting the SLEEP Timer Use the Sleep Time r to turn the System off after a certain number of minutes when i t is playing. By setting the Sleep Timer, you can fall asleep to music and know that your Sys- tem will turn off by itself rather than play all night.
27 English Troubleshooting • If you are having a problem with your System, check this list for a possible solution before calling for service. • If you cannot solve the problem from the hints giv .
28 English Care And Maintenance Handle your CDs carefully, and they will last a long time. Compact Discs CAUTI ON: • Do not use any sol vent (for example, con- ventional reco rd cleaner, spray thi nner, benzine, etc.) to cle an a CD. General Notes In general, you will have the best perfor mance by keeping your CDs and the mechanism clea n.
29 English Specifications CA-FSX1/CA-FSX3 Amplifier Output Power :60 W (30 W + 30 W) at 4 Ω (10% THD) Input Sensiti vity/ Impedance (1 kHz) LINE IN :210 mV/51 k Ω (LEVEL 1) 520 mV/51 k Ω (LEVEL 2) Output Sensiti vity/ Impedance (1 kHz) LINE OUT :600 mV/5.
VICT OR COMP ANY OF JAP AN, LIMITED EN, CS 0403MNMCREJEM © 2003 VICT OR COMP ANY OF JAP AN, LIMITED FS-X1-3(US)_E.book Page 30 Friday, April 1 8, 2003 7:27 PM.
SP-FSX1 CA-FSX1 SP-FSX1 SP-FSX3 CA-FSX3 SP-FSX3 COMP A CT COMPONENT SYSTEM SISTEMAS DE COMPONENTES COMP A CT OS SISTEMA DE COMPONENTES COMP A CT OS For Customer Use: Enter below the Model No . and Serial No. which are located either on the rear , bot- tom or side of the cabinet.
G-1 W arnings, Cautions and Others A visos, precauciones y otras notas Advert ê ncias, Cuidado e outras notas CA U TION T o reduce the risk of e lectrical shocks , fire, etc.: 1. Do not remove scre ws, cov ers or cabinet. 2. Do not expose this appliance to rain or moisture.
G-2 Caution: Proper V entilation T o avoid risk of electr ic shock and fire, and to pr ev ent damage, loca te the apparatus as follows: 1 F ront: No obstr uctions a nd open spacin g. 2 Sides/ T op/ Back: No ob structio ns should be pl aced in the areas shown by the dimensions below .
1 English Introduction Thank you for purchasing the JVC Compact Component System. We hope it will be a valued addition to your home, giving you years of enjoyment. Be sure to read this instruction manual carefully befo re operating your new stereo system.
2 Table of Contents English Introduction ................................... ................................................................ ..... 1 Features ............. ................. ................ ................. ................. .......
Table of Contents 3 English Setting the Daily Timer ................. ................. ................. ................... ................. ................. .... 23 Setting the SLEEP Timer .............. ................. ................. ......
4 English Getting Started Accessories Make sure that you have all of the following items, which are supplied with the System. FM Wire Antenna (1) AM Loop Antenna (1) Remote Control (1) Batteries (2) Speaker Cords (2) AC plug adaptor (1) If any of these items are missing, contact your dealer immediately.
5 Getting Started English CAUTI ON: • Make all connecti ons before plugging the Syst em into an AC power outlet. Connecting the FM Antenna Rear Panel of the Center Unit (CA-FSX1/CA-FSX3) Using the Supplied Wire Antenna • Fasten it up in the position until you ha ve the best reception.
6 Getting Started English Connecting the AM Antenna Rear Panel of the Center Unit (CA- FSX1/CA-FSX3) • If the AM loop antenna wire is covered with vinyl, remove the vinyl by twisting it as shown in the diagram. • Make sure the antenna conductors do not t ouch any other terminals, connecting cords and power cord.
7 Getting Started English Connecting the Speakers (SP-FSX1/SP-FSX3) These speakers are exclusively for this system . Using with other devices will damage the speakers. Connect the speaker cords between the speaker terminals of the Unit and those of the Speakers.
8 Getting Started English Removing the Speaker Grills (SP-FSX1) The speaker grills can be removed. When removing: 1. Pull the bottom towards you with your fingers. 2. Also pull the to p towards you. When attaching the speaker grills: Attach the speaker grills as shown in the diagram .
9 Getting Started English Connecting an MD Recorder, etc (Optical Digital Output) Unplug the cap and connect an optical digital cord (not supplied) between the System ’ s OPTICAL DIGITAL OUT terminal and the input terminal of the MD recorder, etc. You can record the digital output signal from the System ’ s CD Player t o the MD recorder, etc.
10 English Basic Operations Turning the Power On and Off Turning the System On Press the STANDBY/ON button. The display comes on and “ HELLO ” is displayed once. The STANDBY/ON indicator lights in green . The System comes on ready to continue in the mode it was in when the power was last turned off.
11 Basic Operations English Adjusting the Bright ness (DIMMER - at Power On) You can adjust the brightness of the display. When the System is Turned On At power on, each time you press the DIMMER butt.
12 Basic Operations English Tone Control (BASS/TREBLE) You can control the tone by changing the bass (low frequen- cy) and treble (high frequency). On the Remote Control 1 Press the B ASS/TREBLE button. Each time you press the button, the Tone Control mode changes as follows.
13 English Using the Tuner You can listen to FM and AM stations. Stati ons can be tuned in manually, automatically, or from preset memo ry storage. ❑ Before listening to the radio: • Make sure that both the FM and AM antennas are cor- rectly connected.
14 Using the Tuner English ● Preset Tuning using the Remote Control (Possible only after presetting stations) Select the desired preset number using the 3 or 2 button on the Remote Control. The display will show the preset number ’ s band and frequency.
15 Using the Tune r English Beat Cut (AM Reception) Switching the Beat Cut mode may reduce beat noise. Each time you press the FM/PLAY MODE button while re- ceiving an AM broadcast, the Beat Cut mode changes as fol- lows. BEAT CUT 1 = BEAT CUT 2 = BEAT CUT 3 = BEAT CUT 4 = (back to the beginning) Set to the position where beat noise is small.
16 English Using the CD Player You can use Normal, Random, Program or Repeat Play. Re- peat Play can repeat all the tracks or just one of the tracks on the CD. Here are the basic things you need to know to play a CD and locate the different tracks on it.
17 Using the CD Player English ❑ You can insert a CD while listening to the other source. • Howe ver , while the CD door is operating (opening or closing), the other source will be muted. CAUTI ON: • DO NOT try to open or close the CD door by hands as it will be damaged.
18 Using the CD Player English 5 Press the Numeric Keys to enter the track n umber you want to pr ogram (See page 12). The program order number will be assigned from “ 1 ” , if nothing is programmed yet. Example: • T o dele te the last e ntry , press the C ANCEL butt on.
19 Using the CD Player English Repeating Tracks You can repeat all tracks or individual track, as many times as you like. During playback or in Stop mode, press the RE- PEAT button on the Remote Contro l. Each time you press the button, the Repeat mode and Re- peat indicator c hange as follows.
20 English Using External Equipments Listening to External Equipment You can listen to the external equipment such as M D re- corder, tape deck or other auxiliary. ❑ First make sure that the external equipment is properly connected to the System. (See page 8).
21 Using External Equipments English Recording the System ’ s Source to External Equipment You can record t he System ’ s source to external equipment which is connected to the LINE OUT or OPTICAL DIGI- TAL OUT termin al of the System, such as ta pe deck or MD recorder, etc.
22 English Using the Timers The timers let you control listening functions automatically. Two types of timers are available: DAILY Timer Use this timer to se t wake up everyday to music from any source, including melodies. SLEEP Timer Fall asleep and have your System turn off automatically after a certain length of time.
23 Using the Timers English 3 Press the SET button. The minute digits of the time in dication blink on the dis- play. • To return to the hour setting, press the CANCEL button. 4 Press the 3 or 2 button to set the minute. 5 Press the SET button. “ ADJUST OK! ” appears on the display.
24 Using the Timers English On the Remote Control 1 Press the CLOCK/TI MER button repeat- edly until “ ON (time) ” appears on the display. At this time, “ DAILY ” indicator blinks on the display. Each time you press the button, the display changes as follows.
25 Using the Timers English 5 Setting the volume level. Press the 3 or 2 button to select the vo lume level (VOLUME 1-50), then press the SET button. 6 Select the FADE function. Press the 3 or 2 button to select either “ FADE ” (fades in at power on) or “ NoFADE ” (does not fade in).
26 Using the Timers English Setting the SLEEP Timer Use the Sleep Time r to turn the System off after a certain number of minutes when i t is playing. By setting the Sleep Timer, you can fall asleep to music and know that your Sys- tem will turn off by itself rather than play all night.
27 English Troubleshooting • If you are having a problem with your System, check this list for a possible solution before calling for service. • If you cannot solve the problem from the hints giv .
28 English Care And Maintenance Handle your CDs carefully, and they will last a long time. Compact Discs CAUTI ON: • Do not use any sol vent (for example, con- ventional reco rd cleaner, spray thi nner, benzine, etc.) to cle an a CD. General Notes In general, you will have the best perfor mance by keeping your CDs and the mechanism clea n.
29 English Specifications CA-FSX1/CA-FSX3 Amplifier Output Power :60 W (30 W + 30 W) at 4 Ω (10% THD) Input Sensiti vity/ Impedance (1 kHz) LINE IN :210 mV/51 k Ω (LEVEL 1) 520 mV/51 k Ω (LEVEL 2) Output Sensiti vity/ Impedance (1 kHz) LINE OUT :600 mV/5.
VICT OR COMP ANY OF JAP AN, LIMITED EN, SP , PR 0503MNMCREJEM © 2003 VICT OR COMP ANY OF JAP AN, LIMITED FS-X1-3(UW)_E.book Page 30 Thur sday, April 10, 2003 4:06 PM.
Ein wichtiger Punkt beim Kauf des Geräts JVC FS-X3 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC FS-X3 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC FS-X3 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC FS-X3 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC FS-X3 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC FS-X3 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC FS-X3 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC FS-X3. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC FS-X3 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
