Benutzeranleitung / Produktwartung DR-MV7SU des Produzenten JVC
Zur Seite of 60
RCJ106M_NA1UJJ_ENG DR-MV7SU DVD RECORDER / VIDEO CASSETTE RECORDER INSTRUCTIONS LPT1 133-001A For Customer Use : Enter below the Model No. and Serial No. which are located on the rear of cabinet. Retain this information for future reference. Model No.
2 This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulat- ed dangerous voltage within the product’s enclosure that may be of sufficient magni- tude to constitute a risk of electric shock to persons.
3 FCC W ARNING: This equipment may generate or use radio frequency energy . Changes or modifica- tions to this equipment may cause harmful interfer- ence unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
4 1. Read these instructions. - All these safety and operating instructions should be read before the product is operated. 2. Keep these instructions. - The safety , operating and use instructions should be retained for future reference. 3. Heed all warnings.
5 INTRODUCTION About the Symbol Display . . . . . . . . . . . . .6 Symbol Used in this Manual . . . . . . . . . . . . . .6 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .6 Moisture Condensation . . . . . . . . . . . . . . . . . .6 Recordable and Playable Discs .
6 To ensure proper use of this product, please read this owner ’s manual carefully and retain for future reference. About the Symbol Display “ ” may appear on your TV display during operation and indicates that the function is not permitted by this unit or specific media.
7 Recordable and Playable Discs DVD-RW (DVD - ReW ritable) DVD-RW discs can be formatted for VR mode recording or V ideo mode recording. These Discs can be recorded on repeatedly . Recordings can be erased, then you can record again on the same Disc.
8 Playable Discs DVD (8 cm / 12 cm disc) Discs such as movies that can be purchased or rented V ideo CD (VCD) (8 cm / 12 cm disc) VIDEO CDs or CD-Rs/CD-RWs in VIDEO CD/Super VIDEO CD format Audio CD (.
9 Restrictions on video recording •Y ou cannot record copy-protected video using this recorder . Copy-protected video includes DVD-Video discs and some satellite broadcasts. If copy-protected material is encountered during a recording, recording will pause or stop automatically and an error message will be displayed on-screen.
10 a ST ANDBY/ON ( 1/` ) Switches the Recorder ON and OFF . b Disc T ray (DVD deck) Insert a disc here. c Z OPEN/CLOSE Opens or closes the disc tray . d Cassette Compartment (VCR deck) Insert a video cassette here. e Z EJECT Ejects the tape in the VCR deck.
11 INTRODUCTION a ST ANDBY/ON ( 1/` ) T urns Recorder ON and OFF . DVD Select the Recorder ’s function mode to DVD. VCR Select the Recorder ’s function mode to VCR. EJECT , OPEN/CLOSE ( Z ) - Opens and closes the disc tray .
12 a ANT . IN Connect the antenna to this terminal. b S-VIDEO OUT Connect to a S-Video Input on TV . c COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr) Connect to a TV with Y Pb Pr inputs. d AUDIO OUT (Left/Right) Connect to a TV or other equipment with audio inputs.
13 HOOKUP AND SETTINGS Depending on your TV and other equipment there are various ways you can connect the recorder . Please refer to the manuals of your TV , VCR, Stereo System or other devices as necessary for additional connection informa- tion.
14 Connections to your TV Connections to your TV Make one of the following connections, depending on the capabilities of your TV . RF coaxial connection Connect the RF OUT jack on the Recorder to the antenna in jack on the TV using the supplied 75-ohm Coaxial Cable (R).
15 HOOKUP AND SETTINGS HDMI connection If you have a HDMI TV or monitor , you can connect it to this recorder using a HDMI cable. 1. Connect the HDMI OUT jack on the recorder to the HDMI jack on a HDMI compatible TV or moni- tor (H). 2. Set the TV’ s source to HDMI (refer to TV’s Owner ’s manual).
16 Connection to an Connection to an Amplifier Amplifier Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II/Pro Logic Connect the Left and Right AUDIO OUT (or A V.
17 HOOKUP AND SETTINGS Accessory Accessory Audio/V Audio/V ideo (A/V) ideo (A/V) Connections to Connections to Recorder Recorder Connect the A V IN jacks on the Recorder to the audio/video out jacks on your accessory component, using the optional audio/video cables.
18 Initial Setup W Initial Setup W izard izard When ST ANDBY/ON is pressed for the first time to turn the unit on, the Initial Setup Wizard function sets the Language, Channels and Clock. 1. Use v / V to select a language for the Setup menu and information display and then press ENTER.
19 HOOKUP AND SETTINGS Using the Home Menu Using the Home Menu From the Home Menu screen you can access all the Media for playback and recording of the recorder . 1. Press HOME and the Home menu appears. 2. Use b / B to select the desired main option.
20 General Settings General Settings T uning Band Select 1. Select the [T uning Band] option then press B . 2. Use v / V to select the tuning band (TV or CA TV) option then press ENTER. TV : If you are using a standard antenna to receive channels. CA TV : If you are using basic cable to receive channels.
21 HOOKUP AND SETTINGS Manual If your local TV station does not send date and time information, or sends incorrect information, you can set the clock manually . 1. Select the [Clock Set] > [Manual] option. 2. Press ENTER. 3. Enter the necessary information for year , date and time.
22 Audio Settings Audio Settings Each DVD disc has a variety of audio output options. Set the Recorder ’s Audio Output according to the type of audio system you use.
23 HOOKUP AND SETTINGS Disc Settings Disc Settings Initialize If you load a completely blank disc, the recorder will initialize the disc. • DVD-R: The recorder initialize the disc to V ideo mode. The recording mode will always be Video mode. • DVD-RW/DVD+R W/DVD+R: The Initialize menu will appears.
24 PBC PBC stands for Playback Control and refers to special menus and navigation features that are available on some Video CDs. [ON]: V ideo CDs are played according to the PBC, if available.
25 HOOKUP AND SETTINGS General Explanation of General Explanation of On-Screen Display On-Screen Display Some DVDs require specific operation or allow only limited operation during playback. When this occurs, is displayed, action prohibited or not available.
26 Playing a T Playing a T ape ape 1. Press VCR to control the VCR deck. 2. Insert a pre-recorded video cassette. • If the unit is powered off, it will power on automatically when the tape is loaded. • If the T imer indicator lights on the front panel display window , press ST ANDBY/ON once.
27 PLA YBACK VCR Playback Features Buttons Operations EJECT ( Z ) Ejects the tape in the VCR deck. P AUSE ( X ) Pause playback. Press repeatedly to step forward one frame at a time. • After 5 minutes in STILL mode the Recorder stops to protect the tape and video heads.
28 DVD or Video CD Playback Features Buttons Operations OPEN / CLOSE ( Z ) Opens or closes the disc tray . P AUSE ( X ) Pause playback. Press repeatedly to play Frame-by-Frame. Y ou can also use b / B to step backward and forward while in Pause mode. • This function is forward only for Video CD.
29 PLA YBACK DVD or Video CD Playback Features (Continued) Buttons Operations PLA Y MODE Select a desired play mode while playback. [A-] : Repeats a sequence between A (Start point) and B (End point) during playback. Press ENTER at your chosen end point then the repeat sequence begins.
30 Special Playback Options Special Playback Options If a menu screen is displayed In some cases, the disc menu might appear instead. Use the bB v V buttons to select the title/chapter you want to view , then press ENTER to start. Press TITLE or DISC MENU/LIST to return to the menu screen.
31 PLA YBACK Playing a DivX Movie File Playing a DivX Movie File The Recorder can play Divx files. Before playing DivX files, read “About DivX movie files” on right. 1. Press HOME and the Home menu appears. 2. Select [Movie] > [DISC] and press ENTER.
32 Playing an Playing an Audio CD or Audio CD or MP3/WMA MP3/WMA files files The Recorder can play Audio CDs and MP3/WMA files. Before playing MP3/WMA files, read [MP3/WMA audio file requirement] on right. 1. Press HOME and the Home menu appears. 2. Select [Music] > [DISC] and press ENTER.
33 PLA YBACK V V iewing a JPEG files iewing a JPEG files This unit can play JPEG files. Before playing JPEG recordings, read “Photo file requirement” on page 34. 1. Press HOME and the Home menu appears. 2. Select [Photo] > [DISC] and press ENTER.
34 V iew Slide Shows 1. Select [Slide Show] option on the Photo menu. 2. Press ENTER. 3. Use b / B / v / V to set the options. [Object] option: • [Selected] Views slide show only selected files. • [All] Views slide show all files. [Speed] option: Sets the Slide Show speed to [Normal], [Slow], or [Fast].
35 RECORDING About DVD recording About DVD recording Notes: • This Recorder cannot record CD-R or CD-RW discs. • Fingerprints and small scratches on a disc can affect playback and/or recording performance.
36 Basic Recording from a TV Basic Recording from a TV Follow the instructions below to record a TV program. Recording starts immediately and continues until the disc or tape is full or you stop the recording. 1. Switch on the Recorder , select the device (VCR or DVD) for Recording and load a recordable disc or tape.
37 RECORDING T T imer Recording imer Recording The T imer Recording function allows you to record up to 16 programs within a period of one month. 1. Press HOME and the Home menu appears. 2. Select [TV] > [Timer Record] and press ENTER. 3. Select [NEW] and press ENTER.
38 T imer Recording T roubleshooting Even though the timer is set, the recorder will not record when: • The power has been unplugged or the power supply has been stopped. • There is no disc (or tape) loaded. •A non-recordable disc (or tape) is loaded.
39 RECORDING Dubbing from DVD to VCR Dubbing from DVD to VCR Y ou can copy the contents of a DVD to a VHS tape using the DUBBING button. 1. Insert a blank VHS videotape into the VCR deck. 2. Insert the disc you wish to copy in the DVD deck and close the disc tray .
40 Recording from External Recording from External Components Components Y ou can record from an external component, such as a camcorder or VCR, connected to any of the Recorder ’s external inputs. 1. Make sure that the component you want to record from is connected properly to the Recorder .
41 RECORDING Recording from DV Input Recording from DV Input Before DV dubbing Y ou can connect a DV -equipped camcorder to this recorder using a single DV cable for input and output of audio, video, data and control signals. This recorder is only compatible with DV -format (DVC-SD, DV25) camcorders.
42 T T itle List and Chapter List itle List and Chapter List Menu Overview Menu Overview Using the T itle List menu you can edit video content. The editing features available in the T itle List menu depend on whether you are editing video on DVD, and whether you’re editing Original content, or a Playlist.
43 EDITTING VR Mode: Original and VR Mode: Original and Playlist Editing Playlist Editing T itles, Chapters and Parts T itles in the disc’s original content contain one or more chapters. When you insert a disc’s title into the Playlist, all the chapters within that title also appear .
44 Making a New Playlist Making a New Playlist Use this function to add an Original title or chapter to the Playlist. When you do this, the whole title is put into the Playlist (you can delete bits you don’t need later - see [Deleting an Original or Playlist T itle/Chapter] on page 45).
45 EDITTING Deleting an Original or Deleting an Original or Playlist T Playlist T itle/Chapter itle/Chapter When you erase a title or chapter from the Playlist menu, you only remove it from the Playlist; the title/chapter remains in the Original menu.
46 Naming a T Naming a T itle itle Y ou can name Original and Playlist titles independ- ently . 1. Choose the title you want to name on the Title List menu, then press ENTER. The menu options appears on the left side of the menu. 2. Use v / V to select [Edit] > [T itle Name] option then press ENTER.
47 EDITTING Moving a Playlist Chapter Moving a Playlist Chapter Use this function to re-arrange the playing order of Playlist chapters on the Chapter List-Playlist menu. Note: This function is not available if there is only one chapter . 1. Select a chapter on the Chapter List-Playlist menu.
48 Divide One T Divide One T itle Into T itle Into T wo wo Use this command to split a title up into two new titles. 1. On the Title List menu, select a title you want to divide then press ENTER. The menu options appears on the left side of the screen.
49 EDITTING Overwriting Recording Overwriting Recording To overwrite a new video recording on a previously recorded title, follow these steps. This feature is not available for DVD+Rs, that always record at the end of the Disc. 1. Select input source you want to record (TV channel, A V1-2, DV).
50 Area Code Afghanistan AF Argentina AR Australia AU Austria A T Belgium BE Bhutan BT Bolivia BO Brazil BR Cambodia KH Canada CA Chile CL China CN Colombia CO Congo CG Costa Rica CR Croatia HR Czech .
51 REFERENCE T T roubleshooting roubleshooting Symptom No power . Abnormal or no picture. No sound. The playback picture is poor . Do not display the closed caption informa- tion. Picture from external input is distorted. Some channels are skipped over when using CH ( v / V ).
52 Symptom The Recorder does not start playback. V ideo tape cannot be inserted. The Remote Control does not work properly . Camcorder image is not shown. Camcorder image via A/V input or DV IN to Recorder is not shown on TV screen. T imer recording is not possible.
53 REFERENCE Symptom Picture or sound of broadcasting channel is weak or missing. Can’t play disc recorded on this Recorder on another DVD player . Cannot record or did not record successfully . Stereo Audio Record and/or Playback not present. Cause Antenna or cables are loose.
54 General Power requirements AC 120 V , 60 Hz Power consumption Power On : 27 W , Power Off : 0.7 W Dimensions (approx.) 430 X 78.5 X 310 mm (16.9 x 3.
55 DVD Specifications Laser system Semiconductor laser , wavelength 650 nm Frequency response DVD (PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 Hz to 20 kHz Signal-to-noise ratio More than 95dB Harmonic distortion Less than 0.008% Dynamic range More than 90 dB Inputs ANTENNA IN Antenna or CA TV input, 75 ohms VIDEO IN (A V1,2) 1.
56 W W ARRANTY ARRANTY (Only in U.S.A.) (Only in U.S.A.).
57 REFERENCE MEMO MEMO.
58 MEMO MEMO.
59 REFERENCE MEMO MEMO.
DR-MV7SU US Printed in Indonesia 0606MNH-LG-LG FOR SERVICING (Only in U.S.A.) P/N : 3834RV0052P.
Ein wichtiger Punkt beim Kauf des Geräts JVC DR-MV7SU (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC DR-MV7SU noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC DR-MV7SU - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC DR-MV7SU reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC DR-MV7SU erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC DR-MV7SU besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC DR-MV7SU verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC DR-MV7SU. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC DR-MV7SU gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
