Benutzeranleitung / Produktwartung DLA-G150HTE des Produzenten JVC
Zur Seite of 40
DLA-G150HTE OPERATING INSTRUCTIONS PROJECTOR BEDIENUNGSANLEITUNG : PROJEKTOR MANUEL D’INSTRUCTIONS : PROJECTEUR MANUALE D’ISTRUZIONI : PROIETTORE MANUAL DE INSTRUCCIONES : PROYECTOR DLA-G150HTE INSTRUCTIONS QUICK ALIGN.
DLA-G150HTE 1-2 No.51847 3 ENGLISH FRANÇAIS POWER CONNECTION (United Kingdom only) WARNING Do not cut off the main plug from this equipment. If the plug fitted is not suitable for the power points in.
DLA-G150HTE 1-3 No.51847 5 ENGLISH DEUTSH FRANÇAIS ITALIANO ESPAÑOL Accessories The foll owing accessories ar e included with thi s project or. Check for them; i f any i tem is missi ng, please contact your dealer.
DLA-G150HTE 1-4 No.51847 6 Controls and Features Front Side / Top Surface / Right Side 1 Exhaust vents Vents for cooling fans through which warm air comes out. CA UTION • Do not block the exhaust vents, or heat will build up inside, possibly causing a fire.
DLA-G150HTE 1-5 No.51847 7 Controls and Features ENGLISH DEUTSH FRANÇAIS ITALIANO ESPAÑOL Left-hand Side / Rear Side p Connector panel For details, refer to “ Connector Panel ” on page 11. q Rear adjust able foot (for level ing t he proj ector) It is set at the shortest positi on whe n shipped from the factory.
DLA-G150HTE 1-6 No.51847 8 Controls and F eatures Bottom Surface r Air inle t (filter) Air is taken in through the filter to cool the light-source lamp. If the filter is blocked or if something that obstructs the flow of air is placed around the proje ctor, heat may build up inside and could cause a fire.
DLA-G150HTE 1-7 No.51847 9 Controls and Features ENGLISH DEUTSH FRANÇAIS ITALIANO ESPAÑOL Control Panel on the Projector 1 STAND BY In dica tor ON : When in stand-by mode. Blinking :When in cool-down mode. Memo About the cool-down mode: This projector has a function to cool down the heated lamp for a fixed period of time (approx.
DLA-G150HTE 1-8 No.51847 12 Controls and F eatures Remote Control Unit On the remote control, the same buttons as on the control panel of the projector are provided except for the following buttons. For the same buttons, operation is the same in principle.
DLA-G150HTE 1-9 No.51847 13 Controls and Features ENGLISH DEUTSH FRANÇAIS ITALIANO ESPAÑOL r DIG ITA L ZO O M T /W b utto ns A part of image can be magni fied up to four times on the screen. Each time the T or W button is pressed, the im ag e is enlarged or the enlarged image is reduced by a certain degree.
DLA-G150HTE 1-10 No.51847 16 Installing the Projector Adjusting the Inclination of the Projector The vertical angle and the leveling of the projector can be adjusted with the adjustable feet at the bottom of the projector. ■ Adjusting the vertical angle of the projector While pushing the levers on both sides upward, raise the projector.
DLA-G150HTE 1-11 No.51847 17 Installing the Projector ENGLISH DEUTSH FRANÇAIS ITALIANO ESPAÑOL Installing the Projector against the Screen The projector should be placed so that the center line of the lens is at a right angle to the screen as shown in the following figures.
DLA-G150HTE 1-12 No.51847 20 Installing the Projector Effective Range and Distance of the Remote Control Unit The remote control unit can be used as either a wireless remote control unit or a wired one. ■ Using as a wireless remote control unit Aim the remote control unit toward the remote sensor on the front or the rear of the projector.
DLA-G150HTE 1-13 No.51847 21 Installing the Projector ENGLISH DEUTSH FRANÇAIS ITALIANO ESPAÑOL Setting the Position Selecting Screw for Ceiling Mounting When using the projector in an upside-down, c.
DLA-G150HTE 1-14 No.51847 24 Connecting to V arious Devices Connecting to Video Devices Before connecti on, be sure to t urn off both the projector and video devi ce. • Read thoroughly the manual that comes with each video device. • Use the supplied video cable.
DLA-G150HTE 1-15 No.51847 25 Connecting to V arious Devices ENGLISH DEUTSH FRANÇAIS ITALIANO ESPAÑOL Connecting to Hi-Vision Devices/DVD Players Before connecti ng, be sure to t urn off both the projector and Hi-Vi sion devices/ DVD players. • Thoroughly read the manual that comes with each Hi-Vision device or DVD pla yer.
DLA-G150HTE 1-16 No.51847 28 Connecting to V arious Devices Connecting to Computer Devices Before connecti on, be sure to t urn off both the projector and computer devices. • Read thoroughly the manual that comes with each device. ■ Connection to an IBM PC or IBM-compatible computer • Use the supplied personal computer connection cable.
DLA-G150HTE 1-17 No.51847 29 Connecting to V arious Devices ENGLISH DEUTSH FRANÇAIS ITALIANO ESPAÑOL Connecting to Computer Devices (Cont.) Before connecti on, be sure to t urn off both the projector and computer devices. • Read thoroughly the manual that comes with each device.
DLA-G150HTE 1-18 No.51847 32 Basic Operations ■ Projector’s buttons ■ Remote control unit ■ Language display The display languages of the menus, direct buttons (DIGITAL ZOOM, KEYSTONE, etc) and messages is set to “ ENGLISH ” when the projector is bought.
DLA-G150HTE 1-19 No.51847 33 Basic Operations ENGLISH DEUTSH FRANÇAIS ITALIANO ESPAÑOL ■ Projector’s buttons ■ Remote control unit 3. Adjust the Screen Size (Zooming) Adjust the screen size with the remote control's ZOOM (T/W) buttons. To enlarge the screen size: Press the ZOOM (W) button.
DLA-G150HTE 1-20 No.51847 36 Basic Operations ■ Remote control unit FREEZE message FREEZE inhibit message DIGIT AL ZOOM inhibit message Displaying a Still Picture (FREEZE) While projecting an image, a still picture is obtained at any time by using the FREEZE button on the remote control.
DLA-G150HTE 1-21 No.51847 37 ENGLISH DEUTSH FRANÇAIS ITALIANO ESPAÑOL Menu Operations You can adjust picture quality, set functions, get information on the input video signal , etc. using the menus. From the following menu transition dia grams, you can see the overall menus and ba sic button operation in menu mode.
DLA-G150HTE 1-22 No.51847 40 Menu Operation s ■ Menu Transition Diagram in PC Menu Mode Menu Image adj. Setting Color temp. Options Language Information Brightness Contrast Sharpness All reset Menu Image adj. Setting Color temp. Options Language Information T racking Phase Position Resize Clamp Menu Image adj.
DLA-G150HTE 1-23 No.51847 41 Menu Operations ENGLISH DEUTSH FRANÇAIS ITALIANO ESPAÑOL ■ Quick Reference Guide for PC Menu Mode * : Factory set value. Main Menu in PC Menu Mode (While receiving computer-related signals) Image adj. → (Refer to page 48) Brightness: Brightness of the picture image being projected can be adjusted.
DLA-G150HTE 1-24 No.51847 44 Menu Operation s Changing the Color System (Video Menu Mode Only) This function is available only in Video menu mode. The menu is only displayed when there is a signal for the AV IN (Y/C and VIDEO) terminal, and not displayed when there is a signal for the PC2 terminal.
DLA-G150HTE 1-25 No.51847 45 Menu Operations ENGLISH DEUTSH FRANÇAIS ITALIANO ESPAÑOL Changing the Language Display The on-screen language is set to “ English ” when shipped from the fa ctory. When you want to change to another la nguage, set it as follows.
DLA-G150HTE 1-26 No.51847 48 Menu Operation s Adjusting Picture Quality In the “ Image adj. ” submenu, adjust brightness, contrast, sharpness, etc. to obtain the desired picture quali ty. Note that the adjustment items differ in Video menu mode and PC menu mode.
DLA-G150HTE 1-27 No.51847 49 Menu Operations ENGLISH DEUTSH FRANÇAIS ITALIANO ESPAÑOL . 5 Press the EXIT button to return to the previous menu or press the MENU button to exit the menu mode. Memo In some adjustments, the level bar changes according to the set value.
DLA-G150HTE 1-28 No.51847 52 Menu Operation s Changing the Image Size - Resize Function (PC Menu Mode Only) The picture image projected can be selecta ble with the Resize function which is available only in PC menu mode. You can choose the video image size projected from the following: (Factory setting is “ Aspect ” .
DLA-G150HTE 1-29 No.51847 53 Menu Operations ENGLISH DEUTSH FRANÇAIS ITALIANO ESPAÑOL Setting and Adjusting Other Functions (OPTIONS) Various functions are provided as shown in the “ Options 1 ” a nd “ Options 2 ” submenus. You can set or adjust each function, as required.
DLA-G150HTE 1-30 No.51847 56 Replacing the Fuse A fuse is used to protect the power source of the projector. If the fuse is blown, replace it. When the power switch is turned on but no power is supplied to the projector, check the fuse.
DLA-G150HTE 1-31 No.51847 57 ENGLISH DEUTSH FRANÇAIS ITALIANO ESPAÑOL Replacing the Light-Source Lamp The ligh t-sou rce la mp has a service life of app roxim ate ly 1000 hours. When the light-source la mp approaches the end of its service li fe, degradation progresse s rapidly.
DLA-G150HTE 1-32 No.51847 60 Replacing the Light-Source Lamp ■ Resetting the Lamp Use Time After replacing with a new light-source lamp, reset the lamp-time counter inside the projector to clear the accumulated lamp time to zero (0). After resetting, a new count will start for the new light-source lamp.
DLA-G150HTE 1-33 No.51847 61 ENGLISH DEUTSH FRANÇAIS ITALIANO ESPAÑOL Cleaning and Replacing the Filter Cover Clean the filter regularly. If the fi lter is heavily stained and does not cle an, or if it is damaged, replace the filter with a new filter.
DLA-G150HTE 1-34 No.51847 64 Warning Indication If something abnormal has occurred with the projector, the warning status will be indicated by the combi nation of lighting the indicators on the con trol panel as shown in the following table . Then, the projector automatically stops projection and runs th e cooling fan for about 120 seconds.
DLA-G150HTE 1-35 No.51847 65 ENGLISH DEUTSH FRANÇAIS ITALIANO ESPAÑOL Warning Messages The following shows the warning messages th at can be displayed on the screen. When a wa rning message is displayed, take the corrective action describe d here. Message Cause Corrective action Page • No device is connected to the input terminal.
DLA-G150HTE 1-36 No.51847 67 ENGLISH DEUTSH FRANÇAIS ITALIANO ESPAÑOL Specifications ■ Optical mechanism system ■ Electrical system ■ Input terminals ■ Output terminal • Projection method D-ILA ™ (Direct Drive Image Light Amplifi er) method (Reflective-type active-matrix method) • D-ILA ™ device 0.
DLA-G150HTE 1-37 No.51847 68 Specifications ■ General * Design and specifications are subject to change without notice. * D-ILA devices are manufactured with a very high-precision technology, allowing 99.99% of th e pixels to be effective. Only 0.01% or less of the pixels are missing or always on.
DLA-G150HTE 1-38 No.51847 70 Specifications Pin assignment (Specifications for terminals) ■ Y/C terminal ■ RS-232C terminal ■ PC1 terminal/PC OUT terminal 1 2 3 4 Pin number Signal name 1G N D (.
DLA-G150HTE 1-39 No.51847 71 ENGLISH DEUTSH FRANÇAIS ITALIANO ESPAÑOL RS-232C external control By connecting a computer to the RS-232C terminal, you can control th e projector.
DLA-G150HTE Printed in Japan LCT1043-001B 0801-Y-CR-VP © 2001 VICTOR COMPANY OF JAPAN, LIMITED VICTOR COMPANY OF JAPAN, LIMITED.
Ein wichtiger Punkt beim Kauf des Geräts JVC DLA-G150HTE (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC DLA-G150HTE noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC DLA-G150HTE - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC DLA-G150HTE reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC DLA-G150HTE erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC DLA-G150HTE besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC DLA-G150HTE verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC DLA-G150HTE. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC DLA-G150HTE gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
