Benutzeranleitung / Produktwartung Device Family des Produzenten AMX
Zur Seite of 34
Operation/Reference Guide Control System Accessories Mio Modero ® Device Family Last Revised: 09/05/200 8.
AMX Limited Warranty and Disclaimer AMX warrants its products to be free of defects in material and workmanship under n ormal use for three (3) years from the date of purchase fr om AMX, with the foll.
Software License and Warranty Agreement LICENSE GR ANT . AMX grants to Licens ee the non-exc lusive right to use the AMX Software in the manner de scribed in th is License. The AMX Softwar e is licensed, not sold. This lic ense does no t grant Licensee th e right to create derivative works of t he AMX Software.
.
Table of Contents i Mio Modero Device Family Table of Contents Overview ...................... ...................................................................... ................ 1 Specifications ........................ ......................... .
ii Mio Modero Device Family Table of Contents.
Overview 1 Mio Modero Device Family Overview The Mio Modero device family pro vides a wide range of control capabilities in the form of keypads that are as adept as they are ele gant. Each de vice is av ailable as single style (8 button max) or double style (16 button max) with an optional LCD capped button.
Overview 2 Mio Modero Device Family Specifications The Mio Modero device family ke ypad specifications are as follows: Specifications Power: 12 vDC, 70 - 230 mA (range depending on device type and num.
Overview 3 Mio Modero Device Family Available Color Schemes The Mio Modero device family is av ailable in a range of colors, and the Elite supports a variety of Lutron color schemes. Mio Modero LCD Feature The Mio Modero Elite is av ailable with an optional LCD screen.
Overview 4 Mio Modero Device Family.
Installation 5 Mio Modero Device Family Installation The basic front and rear components of the Mio Modero are as follo ws: Before touching the devi ce, discharge the st atic electricity from your body by touching a grounded metal object. FIG. 2 Mio Modero Front an d Rear Componen ts AxLink 3.
Installation 6 Mio Modero Device Family Changing Buttons The Mio Modero Classic and Elite are shipped with "i nstallation" b uttons; they are intended to be place holders until your engra ved buttons, designed with K eypadBuilder , arriv e. To switch out "install ation" buttons: 1.
Installation 7 Mio Modero Device Family To change custom buttons: 1. If connected, disconnect the power supply . 2. If connected to mounting frame, place a flathead scre wdri ver in the notch at the bottom right of the Mio Modero, and pry the faceplate from the mounting frame.
Installation 8 Mio Modero Device Family Setting The AxLink Device Number 1. If connected, disconnect the power supply . 2. Locate the 8-position Device DIP switch on the rear panel.(FIG. 5). 3. Set the DIP switch according to the switch values sho wn below .
Installation 9 Mio Modero Device Family Wiring guid elines The Mio Modero requires 12 VDC po wer to operate pr operly . The necessary power is supplied via the AxLink cable. The maximum AxLink wiring distanc e is determined by power consumption, supplied voltage, and the wire gauge used for the cable.
Installation 10 Mio Modero Device Family Using AxLink for data with an auxiliary power supply Connect the controller’ s AxLink connector to the AxLink connector on the re ar panel of the Mio Modero device, as shown in FIG.
Installation 11 Mio Modero Device Family Mounting Procedures FIG. 8 shows the wallbox mounting dimensions for the single and double style Mio Modero. AMX recommends mounting the Mio Modero in a standa.
Installation 12 Mio Modero Device Family Wallbox Mounting 1. Use the cutout dimension for the wallbox to cutout the install surface for the Mio Modero. 2. Confirm that the terminal end of the AxLink cable is disconnected, and not receiving po wer . 3.
Installation 13 Mio Modero Device Family Podium Mounting 1. Use the cutout dimension shown in either FIG. 8 or FIG. 9 to cutout the mounting frame in stall surface for the Mio Modero. 2. Confirm that the terminal end of the AxLink cable is disconnected, and not receiving po wer .
Installation 14 Mio Modero Device Family Accent Frame While the Mio Modero de vice family does fit into many International wallboxes, it may be necessary to utilize the optional accent frame to completely cov er the wallbox. T o install the Mio Modero with the optional accent frame: 1.
Mio Modero IR 15 Mio Modero Device Family Mio Modero IR The Mio Modero IR (FIG. 11) is a re mo te IR recei ver for use with NetLinx ® Central Controllers and operates via the AxLink bu s to remotely control devices .
Mio Modero IR 16 Mio Modero Device Family Wiring and Inst allation Set the receiv e AxLink device number before installing the Mio Modero IR. FIG. 12 illustrates the location of key components on the Mio Modero IR circuit boa rd. Setting the AxLink De vice Number 1.
Mio Modero IR 17 Mio Modero Device Family Wiring Guidelin es The Mio Modero IR requires 12 VDC power to operate properly . The power is supplied by the AMX system's AxLink cable.
Mio Modero IR 18 Mio Modero Device Family Mounting Procedure FIG. 15 shows the wallbox mounting dimensions for the Mio Modero IR. AMX recommends mounting the Mio Modero IR in a standard one-gang w allbox, a conduit box per NEC specs section 370, with a minimum internal clearance of 2-5/8" x 1-3/4" x 1-5/8" (HWD).
Mio Modero IR 19 Mio Modero Device Family FIG. 16 Attaching the facepl ate to the mounting fram e.
Mio Modero IR 20 Mio Modero Device Family.
Programming The Mio Modero 21 Mio Modero Device Family Programming The Mio Modero KeypadBuilder Most functionality of the Mio Modero is handled using the application, Ke ypadBuilder . Go to www .amx.com for the Ke y padBuilder Instruction Manual . There are a select number of SEND_COMMANDs the Mio Modero recognizes.
Programming The Mio Modero 22 Mio Modero Device Family SEND_COMMANDs (Cont.) ^CFG Combine/Uncombine adjacent buttons Syntax: "'^CFG- <command value>'" V ariables: command value = (1= combine, 0= uncombine).
Programming The Mio Modero 23 Mio Modero Device Family SEND_COMMANDs (Cont.) ^FML D L # Sets a line of the display to a dynamic li ne with a level, and sets the level style Syntax: "'^FML-&l.
Programming The Mio Modero 24 Mio Modero Device Family SEND_COMMANDs (Cont.) ^SHO Show or hide text with a set variable text range. Syntax: "'^SHO-<variable text address range>,<command value>'" V ariables: variable text address range = 1 - 4; the addr ess range corresponds to the dynamic line number .
Programming The Mio Modero 25 Mio Modero Device Family SEND_COMMANDs (Cont.) ^TXT - (LCD equipped only) Assign a text string to those LCD buttons with a defined address range.
Programming The Mio Modero 26 Mio Modero Device Family Sending Firmware to The Mio Modero Keypads Y ou need NetLinx studio to update firmware located on the Mio Modero Keypads. T o send firmware to the keypads: 1. Open NetLinx Studio. 2. Go to T ools > Firmware T ransfers > Send to Axcess Device.
Programming The Mio Modero 27 Mio Modero Device Family.
9/08 © 2007 AMX. All rights reserved. AMX and the AMX logo are regist ered trademarks of AMX. AMX rese rves the right to alter specific ations wi thout notice at any tim e. It’s Your World - Take Con trol™ 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 USA • 800.
Ein wichtiger Punkt beim Kauf des Geräts AMX Device Family (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie AMX Device Family noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für AMX Device Family - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von AMX Device Family reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über AMX Device Family erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon AMX Device Family besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von AMX Device Family verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit AMX Device Family. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei AMX Device Family gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
