Benutzeranleitung / Produktwartung CA-EX70 des Produzenten JVC
Zur Seite of 51
1 CA-EX70 For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear , bottom or side of the cabinet. Retain this information for future reference.
2 CA-EX70 EN01-22.CA-EX70[J]/1-5/21 98.6.8, 9:31 AM 2.
3 CA-EX70 W elcome ! We would like to thank you for purchasing one of our JVC products. Before connecting this unit to the wall outlet, please read the instructions carefully to ensure that you obtain the best possible performance. If you have any questions, please consult your JVC dealer .
4 CA-EX70 T able of Contents Welcome ! .......................................................... 3 Important cautions .............................................. 3 For safe use, observe the following ................... 3 Parts Index .............
5 CA-EX70 Front Panels Amplifier/tuner CD player Parts Index BAND VOLUME UP KEY MODE DOWN INPUT PHONES RX-EX70 INTEGRATED AMPLIFIER / TUNER STANDBY DIRECT S. A. BASS POWER 3 4 5 2 1 9 8 7 6 11 10 PLAY MODE REPEAT STANDBY XL-EX70 COMPACT DISC PLAYER CD 3 CD 2 CD 1 /CANCEL 19 16 17 18 15 14 13 PLAY & EXCHANGE 12 POWER 20 EN01-22.
6 CA-EX70 Amplifier/tuner front panel 1 POWER button Press to switch the power between ON and ST ANDBY . ST ANDBY indicator Lights up when the power is in ST ANDBY mode. T urns off when power is ON. 2 Display 3 Remote sensor 4 KEY MODE button Press to switch the operation mode of the < and > (cursor) buttons.
7 CA-EX70 Displays Amplifier/tuner CD player PRESET VOLUME DAILY SLEEP REC MD CD TAPE TUNER AUX 1 2 3 4 5 6 7 PROGRAM RANDOM REPEAT ALL 1 CD 12 34 5 67 89 1 0 11 12 13 14 15 DISC 8 8 8 10 9 11 12 13 EN01-22.
8 CA-EX70 CD player display 8 Play indicators ‹ : Lights up during CD playback. * : Lights up during pause. 9 Disc indicator Shows the CD disc number being played or selected. p Character display Shows the track number , play time, program sequence, etc.
9 CA-EX70 Rear Panels Amplifier/tuner CD player AM EXT AM LOOP FM FM (75 ) GNDGND ANTENNA LEFT LEFT RIGHT OUT(REC) IN (PLAY) OUT(REC) IN (PLAY) RIGHT 1 2 3 4 SPEAKERS COMPU LINK-3 ( SYNCHRO ) CD MD TAPE AUX SUB- WOOFER OUT 5 6 7 8 9 COMPU LINK-3 ( SYNCHRO ) ANALOG OUT DIGITAL OUT AC POWER CORD OPTICAL RIGHT LEFT 12 13 10 11 EN01-22.
10 CA-EX70 Amplifier/tuner rear panel 1 CD input jacks Connect to the ANALOG OUT jacks of the CD player . 2 MD input/output jacks Connect to the output/input jacks of the MD recorder . OUT (REC): Connect to the IN (REC) jacks of the MD recorder . IN (PLA Y): Connect to the OUT (PLA Y) jacks of the MD recorder .
11 CA-EX70 Remote control Remote control 1 POWER Press to switch the power between ON and ST ANDBY . 2 Number buttons • Use to select preset channels when listening to the tuner . • Use to select tracks after pressing CD, CD1, CD2, CD3 or PLA Y MODE.
12 CA-EX70 9 T APE DIRECTION Press to change the tape direction when using the cassette deck. p 4 1 (skip back) / < • Press to skip or search backward on the CD player after pressing CD, CD1, CD2, CD3, or PLA Y MODE. • Press to rewind on the cassette deck after pressing T APE or T APE CONTROL.
13 CA-EX70 Supplied Accesories Before setting up your system make sure you received all of the following supplied accesories. Setting up the System RX-EX70 (Amplifier/tuner) XL-EX70 (CD player) AC pow.
14 CA-EX70 AM EXT AM LOOP FM FM (75 ) GNDGND ANTENNA Connections Before Making Any Connections • Be sure to confirm the locations of the left and right, + and –, and IN and OUT terminals on each component and make connections correctly and firmly .
15 CA-EX70 AM EXT AM LOOP FM FM (75 ) GNDGND ANTENNA LEFT LEFT RIGHT OUT(REC) IN (PLAY) OUT(REC) IN (PLAY) RIGHT SPEAKERS COMPU LINK-3 ( SYNCHRO ) CD MD TAPE AUX SUB- WOOFER OUT COMPU LINK-3 ( SYNCHRO.
16 CA-EX70 Connecting the Speakers Connect the left speaker to the LEFT speaker terminals and connect the right speaker to the RIGHT speaker terminals.
17 CA-EX70 Remote control batteries Load the supplied batteries (2) into the remote control. 1 Open the battery case. Push down and pull the lid in the direction of the arrow . 2 Load the batteries. Insert two R6P(SUM-3)/AA(15F) batteries. Match the polarity (+ and –) of the batteries with the + and – marks inside the battery compartment.
18 CA-EX70 Setting the Clock This unit incorporates a clock with a 12-hour display . Be sure to set the clock before operating the unit. The clock can be set either in ON or ST ANDBY mode of power . Use the remote control unit to set the clock. 1 Press CLOCK/TIMER.
19 CA-EX70 T urning on the Power Press POWER. The ST ANDBY indicator goes out and “HELLO” appears in the display . • Pressing POWER of RX-EX70 turns on the source component previously selected. • Pressing POWER of the other components also turns on the amplifier/tuner .
20 CA-EX70 Adjusting the Sound Emphasizing the bass Press S.A.BASS. “S.A.BASS” and “ON” appear in the display and the S.A.BASS indicator lights up. T o cancel the bass emphasis Press S.A.BASS again. “S.A.BASS” and “OFF” appear in the display and the S.
21 CA-EX70 Adjusting the Balance Use the remote control for these operations. 1 Press BALANCE. 2 Press –/L or +/R to adjust the balance level. Press –/L to shift the sound to the left speaker . Press +/R to shift the sound toward the right speaker .
22 CA-EX70 Selecting a Source Select the input source to be played. From the front panel Press INPUT repeatedly . The name of the selected source appears in the display . Each press of INPUT switches the input source as shown below . • When the TUNER source is selected, the display shows the frequency of the last received radio station.
23 CA-EX70 Manual and Automatic T uning This section shows you how to tune in an FM or AM broadcast. From the front panel 1 Press BAND to select the band you desire (FM or AM).
24 CA-EX70 From the remote control 1 Press TUNER to select the band you desire (FM or AM). In addition to selecting the FM band, this operation also sets the remote control to tuner operation mode.
25 CA-EX70 Presetting Stations Once stations are preset, they can be called up quickly with preset tuning. Y ou can preset a total of 40 stations, either FM or AM. 1 T une in the station you want to preset. Use the buttons on the remote control to tune in the station; otherwise, following operation will not be possible.
26 CA-EX70 Listening to Preset Stations This section explains how to tune in preset stations. From the front panel 1 Press KEY MODE so that “PRESET” appears in the display . 2 Press > (for higher numbers) or < (for lower numbers) repeatedly to select the preset you desire.
27 CA-EX70 Loading CDs The CD player’ s unique 3 disc changer mechanism houses 3 individual disc trays inside the main tray . 1 Press 0 (open) for the disc tray (CD 1to 3) you want to load. The main tray opens to the selected disc tray . The disc tray number and “OPEN” appear in the display .
28 CA-EX70 Basic Operations The following operations play all 3 CDs once, one after another . 1 Load CDs. See “Loading CDs” on page 27. 2 Press CD 1, CD 2 or CD 3 for the disc you want to play . The amplifier/tuner automatically switches to the CD input and the CD starts to play .
29 CA-EX70 T o exchange CDs during playback of another Press 0 corresponding to a disc number not shown in the display to open that disc tray and exchange the CD. When CDs are exchanged during playback, playback stops after playing the last exchanged CD.
30 CA-EX70 PROGRAM RANDOM Program Play Mode This play mode lets you play tracks from up to 3 CDs in the order you desire. 1 Load CDs. See “Loading CDs” on page 27. 2 Press PLA Y MODE repeatedly to select PROGRAM. “PROGRAM” appears in the display and the PROGRAM indicator lights up.
31 CA-EX70 4 Press ‹ / 8 to start program playback. Program playback stops automatically after playing all the programmed tracks. T o check the programmed tracks Press 4 or ¢ on the remote control during stop mode. Pressing ¢ shows programmed track numbers in the programmed order .
32 CA-EX70 Random Play Mode This play mode lets you play tracks from up to 3 CDs at random. Y ou can enjoy listening to the tracks in a different order each time. 1 Load CDs. See “Loading CDs” on page 27. 2 Press PLA Y MODE repeatedly to select RANDOM.
33 CA-EX70 REPEAT 1 CD REPEAT ALL REPEAT 1 Repeat Play Mode This play mode lets you repeat the current track, the current CD, or all the tracks on all the CDs. 1 Press REPEA T repeatedly to select the repeat mode. Each time you press REPEA T , the repeat modes switch as follows: REPEA T ALL Repeats all the tracks on all CDs.
34 CA-EX70 Introduction This unit incorporates three different timers. Use the remote control for timer settings. The timer can also be used to operate other optional components are connected to this unit.
35 CA-EX70 Daily T imer Use the remote control to set this timer . It can be set during either power ON or ST ANDBY . Be sure to set the clock before attempting this operation. 1 Press CLOCK/TIMER to display “DAIL Y”. 2 Press CLOCK/TIMER again. “ON” appears in the display .
36 CA-EX70 When CD is selected: 1 Press +/R or –/L repeatedly to select desired disc number , then press SET . 2 Press +/R or –/L repeatedly to select desired track number , then press SET .
37 CA-EX70 Recording T imer Use the remote control to set this timer . It can be set during either power ON or ST ANDBY . Be sure to set the clock before attempting this operation. 1 Press CLOCK/TIMER 3 times to display “REC”. 2 Press CLOCK/TIMER again.
38 CA-EX70 6 Select the recording component (MD or T APE). Press +/R or –/L so that the desired component is blinking, then press SET . • The blinking component is selected. After SET is pressed, the display shows the start time, the end time, the source, and the volume settings.
39 CA-EX70 10 20 30 60 90 120 Sleep T imer Use the remote control to set this timer . 1 Start playing a source. 2 Press SLEEP repeatedly to set the timer . Each time you press SLEEP the timer changes as follows. Setting is complete when the SLEEP indicator stops blinking and lights steadily .
40 CA-EX70 STANDBY XM-EX90 MINIDISC RECORDER DISC LOADING MECHANISM INPUT CD REC REC LEVEL REC PAUSE /CANCEL SAMPLING RATE CONVERTER STANDBY TD-EX90 CASSETTE DECK CD REC REVERSE MODE DOLBY NR REC DOLB.
41 CA-EX70 Shortcut Playback (From the RX-EX70 Amplifier/tuner) By simply pressing INPUT of the amplifier/tuner (RX-EX70) to select an input source, the selected source component can automatically be turned on and its playback started. Playing CDs Press INPUT to select “CD”.
42 CA-EX70 Shortcut Playback (From a Source Component) By starting playback of a source component, the amplifier/tuner’ s input source is automatically switched to that source and playback can be monitored through it. If playback is started while the amplifier/tuner’ s power is in the ST ANDBY mode, it is also switched ON automatically .
43 CA-EX70 Remote Control of the Other Optional Components The remote control provided with the units can be used to control other optional components such as the CD player (XL-EX70) and cassette deck. Operate the remote control by pointing it to the remote sensor of the amplifier/tuner .
44 CA-EX70 Program playback of CD 1 While the CD player is in stop mode, press PLA Y MODE of the CD player to “PROGRAM”. 2 Specify the disc number . Press one of CD1, CD 2 and CD 3. 3 Specify a track number using the number buttons. Specify while the display is blinking (for 4 sec.
45 CA-EX70 Synchronized Recording When recording CD audio onto an MD, CD audio onto a cassette tape or MD audio on a cassette tape, the recording operation can be synchronized with the playback operation. Recording CD audio onto an MD (1: Recording the digital input from the CD player) 1 Prepare the MD recorder .
46 CA-EX70 Recording CD audio onto a cassette tape (1) 1 Prepare the cassette deck. Load a tape for use in recording in the cassette deck. 2 Prepare the CD player . Load the CD to be recorded in the CD player . Program tracks as required. 3 Press CD REC of the cassette deck.
47 CA-EX70 ACTION • Connect the power . • Refer to “Connections” and make sure all equipment is connected correctly . • Connect the speaker cords. • Disconnect the headphones. • T urn VOLUME to the right. • Make sure both speakers are connected with the correct polarity .
48 CA-EX70 SYMPTOM CD player Playback is not possible. Sound is intermittent. No sound. Disc tray does not open. CD player does not respond. ACTION • Load a disc (see page 27). • Load the disc so that the label side faces up in the disc tray . • Load the disc so that it lies flat in the disc tray (see page 27).
49 CA-EX70 Amplifier/tuner (RX-EX70) CD Player (XL-EX70) Specifications Output Po w er 20 watts per channel, min. RMS, both channels driven, into 6 ohms fr om 70 Hz to 20 kHz, with no more than 0.9% total harmonic distortion. T otal Harmonic Distortion (6 ohms, 1 kHz) 0.
50 CA-EX70 Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineering and production of the wide array of JVC products, service is the key to maintaining the high level of performance for which JVC is world famous.
51 CA-EX70 LIMITED W ARRANTY A UDIO-1 JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIAL AND WORKMANSHIP from the date of original retail purchase for the period as shown below.
Ein wichtiger Punkt beim Kauf des Geräts JVC CA-EX70 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC CA-EX70 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC CA-EX70 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC CA-EX70 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC CA-EX70 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC CA-EX70 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC CA-EX70 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC CA-EX70. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC CA-EX70 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
