Benutzeranleitung / Produktwartung AV-32230 des Produzenten JVC
Zur Seite of 52
COLOR TELEVISION USER'S GUIDE For models: A V -36260 A V -36230 A V -32260 A V -32230 A V -27260 Illustration of A V -32260 and RM-C305 IMPORT ANT NO TE T O THE CUSTOMER In the space below , enter the serial number of your television (located at the rear of the television cabinet).
IMPOR T ANT SAFETY PRECA UTIONS W ARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS TV SET TO RAIN OR MOISTURE. CA UTION: TO INSURE PERSONAL SAFETY , OBSER VE THE FOLLOWING RULES REGARDING THE USE OF THIS UNIT . 1 . Operate only from the power sour ce specified on the unit.
IMPOR T ANT SAFEGU ARDS CA UTION: Please read and retain for y our safety . Electrical energy can perfor m many useful functions. This TV set has been engineered and manufactured to assur e your personal safety . But improper use can result in poten- tial electrical shock or fire hazar ds.
7 An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or wher e it can fall into such power lines or circuits.
13 For added protection of the TV set during a lightning storm or when the TV set is to be left unattended for an extended period of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to pr oduct due to lightning stor ms or power line surges.
VIDEO L MONO AUDIO R INPUT 2 POWER DISPLAY SLEEP TIMER CHANNEL VIDEO STATUS SOURCE FREEZE PIP SWAP ON/MOVE INPUT 1 7 4 100+ 3 9 6 RETURN+ MUTING MENU V CHIP PIP OFF EXIT 2 8 0 5 + CH VOL VOL + CH REC .
7 Slide the cover on the back of the remote down towards the bottom of the remote control. Insert two batteries carefully noting the “+” and “–” markings, placing the “–” end in the unit first.
S VIDEO VIDEO INPUT 1 R L MONO INPUT 4 AUDIO OVER R L 75 Ω (VHF / UHF) COMPONENT VIDEO IN AV COMPULINK EX AUDIO OUT W ALL CABLE or ANTENNA OUT Cable/RF connector 8 S VIDEO VIDEO INPUT 1 R L MONO INP.
9 Press the ❷ buttons to move to AUTO TUNER SETUP Press the ➛❿ buttons to begin AUTO TUNER SETUP ➛❿ T o choose CABLE (if you are connected to a cable system) or AIR (if you use an antenn.
T able of Contents Quick Setup Guide ....7 CONNECTIONS Cable and VCR Connections .......1 1 Connecting to a DVD Player .......1 4 Connecting to an External Amplifier . . . 15 Connecting to a Camcorder .......1 5 Connecting to JVC A V Compu Link . . . 16 GETTING ST ARTED Remote Control Remote Control Basics .
1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the two-way splitter . 2) Connect an RF cable from the one of the RF Outputs on the splitter , in to the RF Input on the back of the VCR. 3) Connect an RF cable from the other the RF Output on the splitter, in to the RF Input on the back of the TV .
Connections 12 S VIDEO VIDEO INPUT 1 R L MONO INPUT 4 AUDIO OVER R L 75 Ω (VHF / UHF) COMPONENT VIDEO IN AV COMPULINK EX AUDIO OUT VCR IN OR OR W ALL CABLE or ANTENNA OUT 1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the cable box.
Connections 13 The connection diagrams are intended to show some basic general connections. Some cable companies may require special connections to pr operly use your tele vision or 2-tuner PIP function.
Connections 14 S VIDEO VIDEO INPUT 1 R L MONO INPUT 4 AUDIO OVER R L Y 75 Ω (VHF / UHF) COMPONENT VIDEO IN AV COMPULINK EX AUDIO OUT D VD Player Y P B P R AUDIO OUT R L Green Blue Red Connecting to a D VD pla yer 1) Connect Green cable out from DVD player “Y” Component Output, in to TV “Y” Component Input.
Connections 15 1) Connect the yellow video cable out from the Camcorder ’s Video Output, in to the TV’s Video Input jack. 2) Connect the white audio cable out from the Camcorder ’s Left Audio Output, in to the TV’s Left Audio Input jack.
Connections 16 S VIDEO VIDEO INPUT 1 R L MONO INPUT 4 AUDIO OVER R L 75 Ω (VHF / UHF) COMPONENT VIDEO IN AV COMPULINK EX AUDIO OUT VCR or D VD player AV Compu Link EX Swap T o Connect: Plug one end of the A V Compu Link cable into the A V Compu Link EX input on your VCR, DVD, or other Compu Link device.
Before you can operate the remote control, you must first install the batteries (included). See “Changing the Batteries” at the bottom of this page for instructions. (For an illustration, please see page 7.) Press the P OWER button to turn the television on or off.
Remote Programming 18 Setting the CA TV , VCR and D VD Codes Y ou can program your remote to operate your cable box, satellite receiver , VCR or DVD player by using the instructions and codes listed below .
Remote Programming Admiral Aiwa Akai Audio Dynamic Bell & Howell Broksonic Canon CCE Citizen Craig Curtis Mathes Daewoo DBX Dimensia Emerson Fisher Funai G.
Remote Programming 20 The remote control is programmed with DVD codes for power on, power off, play , stop, fast-forward, rewind, previous chapter , next chapter, tray open/close, and still/pause operation. 1) Find the DVD player brand from the list of codes shown below .
Onscreen Menus 21 Using the Guide The Onscreen Menus Certain symbols are used throughout this guide to help you learn about the features of your new television. The ones you will see most frequently are: ❷ Up and Down arrows mean press the C H + or C H - buttons.
Plug In Menu 22 The Plug In Menu comes up automatically when you first turn on the TV after plugging it in. The Plug In Menu helps you to get your TV ready to use by letting you set your preferences f.
Plug In Menu 23 A uto Clock Set Before you use any of your TV’s timer functions, you must first set the clock. Y ou may precisely set your clock using the XDS time signal broadcast by most Public Broadcasting stations.
Plug In Menu 24 T o set your clock manually (without using the XDS signal), choose MANUAL from the Set Clock menu and follow the steps below . ❷ T o SET CLOCK ➛❿ T o operate ➛❿ T o MANUA.
Channel Summary Channel Summary Channel Summary allows you to customize the line-up of channels received by your TV . Y ou can add or delete channels from the line-up or prevent any unauthorized viewers from watching any or all 181 channels.
V -Chip 26 Y our TV is equipped with V -Chip technology which enables TV Parental Guidelines (for United States and Canada) and Movie (MP AA) Guideline controls. V-Chip technology allows you to pro- gram your TV to receive, or not to receive, programs based on content according to the guidelines.
V -Chip 27 • V/FV is for VIOLENCE/F ANT ASY VIOLENCE • S stands for SEXUAL CONTENT • L stands for strong LANGUAGE • D stands for suggestive DIALOG Viewing Guidelines US V -Chip Ratings U.S. P ARENT AL RA TING SYSTEMS Programs with the following ratings ar e appropriate for childr en.
V -Chip 28 Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV , S, etc.) and press the or ❷ to move the cursor to the correct location. Press ➛ or ❿ to turn the locking feature on or off. An item is locked if the icon appears instead of a “—” .
V -Chip 29 Setting ratings with the V -Chip button Example 2: If you want to set your V -Chip settings to block all programming above a current setting such as TV PG-V (with violence): Press Z ERO when TV -PG - V is displayed All Programming above TV PG - V (with Violence) will be blocked.
V -Chip 30 ❒ NR - Not Rated. This is a film which has no rating. In many cases these films were imported from countries which do not use the MP AA ratings system. Other NR films may be from amateur producers who didn’t intend to have their film widely released.
V -Chip 31 ❒ E - Exempt. Exempt programming includes: news, sports, documentaries and other information programming, talk shows, music videos, and variety programming. ❒ C – Programming Intended for Children. Violence Guidelines: There will be no realistic scenes of violence.
V -Chip 32 Unrated Programs Notes About Unrated Programs: Unrated programming refers to any programming which does not contain a rating signal. Programming on television stations which do not broadcast rating signals will be placed in the “Unrated Programming" category .
V -Chip 33 Set Lock Code Channel Guard and V -Chip settings are protected by a four-digit Lock Code. Y our TV comes pre-set with a Lock Code of "0000". Y ou may change the code to any four-digit number you wish. T o change the Lock Code, follow the steps below .
Picture Settings 34 Tint Color Picture Bright Detail T int allows you to adjust the levels of red and green in your TV picture. Press the M ENU button ❷ T o TINT ❿ T o increase the levels of g.
Picture Settings 35 Noise Muting Set Video Status This feature inserts a blank blue screen over channels which are not broadcasting or are too weak to be received clearly .
Sound Settings 36 Y ou can increase or decrease the level of low-frequency sound in the TV’s audio with the Bass adjustment. Press the M ENU button ❷ T o BASS ❿ T o increase the bass ➛ T o decrease the bass ❷ T o move to the next setting Use Treble to adjust the level of high-frequency sound in your TV’s audio.
General Items 37 The On/Off timer lets you program your television to turn itself on or off. Y ou can use it as an alarm to wake up, to help you remember important programs, or as a decoy when you're not home.
General Items 38 If your TV is connected to a stereo system, you can turn off the TV speakers and listen to the audio through your stereo. Press the M ENU button ❷ T o TV SPEAKER ➛❿ T o turn.
General Items 39 Many broadcasts now include an onscreen display of dialog called Closed Captions. Some broad- casts may also include displays of additional information in text form. Y our television can access and display this information using the Closed Caption feature.
Button Functions 40 The Display screen shows the current status of timers and inputs. Press the D ISPLAY button The screen above shows the following information: • The current channel or A V input (.
Button Functions 41 Video Status Sleep Timer Hyper Surround Muting The V IDEO S TA TUS button gives you a choice of three TV picture display settings, including a display of your own preferences. Standard - Resets the picture display to the factory settings.
Button Functions 42 The R ETURN + button has two functions: Return - Returns to the channel viewed just before the channel currently onscreen. Return+ - Lets you program a specific channel to return to while scanning through the channels using the CH+ and CH- buttons.
Button Functions 43 D VD Buttons VCR Buttons TV/CA TV Switch VCR/D VD Switch Y ou can also use this remote control to operate the basic functions of your DVD player . These functions include: play , rewind, fast-forward, stop, still/pause, previous/next, tray open/close, power on, and power off.
Button Functions - PIP 44 PIP displays two separate pictures on screen. Y our television has 2-Tuner PIP , meaning you can view pictures from two different channels simultaneously . A special set of PIP control buttons are located on the upper part of the remote control.
45 Button Functions - PIP Freeze Swap Channel +/- for PIP Source Use the F REEZE button to lock a single, still image onto the PIP window . • If PIP is off when F REEZE is pressed, a snapshot of the main screen is taken and placed in the PIP window .
T roubleshooting There is no power There is no picture or sound Y ou cannot select a cer tain channel The power turns off by itself The clock is wrong The color quality is poor The On Timer is blinkin.
47 JVC COMP ANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONL Y TO THE ORIGINAL PURCHASER A T RET AIL to be FREE FROM DEFECTIVE MA TERIALS AND WORKMANSHIP from the date of original retail purchase for the period shown below (the “W arranty Period”) (PICTURE TUBE is covered for T wo (2) years.
48 7) Accessories; 8) Batteries (except that Rec hargeable Batteries are co vered for 90 da ys from date of pur- chase.) There are no express warranties except as listed abo ve . THE DURA TION OF ANY IMPLIED W ARRANTIES, INCLUDING THE IMPLIED W ARRANTY OF MERCHANT ABIL TY , IS LIMITED TO THE DURA TION OF THE EXPRESS W ARRANTY HEREIN.
Authorized Service Centers QUALITY SERVICE T OLL FREE: 1 (800) 537-5722 http://www .jvc.com HO W T O LOCA TE Y OUR JVC SER VICE CENTER Dear Customer , In order to receive the most satisfaction from your purchase, please read the instruction booklet before operating the unit.
Search Codes Cable/Satellite Sear ch Codes Function: 1) Slide the first 2-Way Mode Selector switch to CA TV . 2) Press the TV P OWER and R ETURN + buttons. Hold for at least three seconds and release. 3) Press TV P OWER , see if the CA TV or Satellite box responds.
MODEL A V -27260 A V -32230 A V -32260 A V -36260 A V -36230 Reception Format Reception Range Power Consumption Screen Size Audio Output Speakers Antenna T erminal External Input Jacks Audio Output Ja.
JVC COMP ANY OF AMERICA Division of JVC Americas Corp. 1700 V alley Road W ayne, New Jersey , 07470 JVC CANADA, INC. 21 Finchdene Square Scarborough, Ontario Canada, M1X 1A7 AC/Core line mini-IB 2/8/0.
Ein wichtiger Punkt beim Kauf des Geräts JVC AV-32230 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC AV-32230 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC AV-32230 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC AV-32230 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC AV-32230 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC AV-32230 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC AV-32230 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC AV-32230. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC AV-32230 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
