Benutzeranleitung / Produktwartung AV-29SX76 des Produzenten JVC
Zur Seite of 70
INSTRUCTIONS GGT01 16-001A-H A V -29BS26 A V -21BS26 A V -29BX16 A V -21BX16 A V -29MS26 A V -21BX16B A V -29MX16 A V -21MS26 A V -29MX56 A V -21MX16 A V -29MX76 A V -21MX56 A V -29SS26 A V -21MX76 A .
2 15 cm 10 cm 10 cm 15 cm W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: T O ENSURE PERSONAL SAFETY , OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV . 1 Operate only from the power source indicated on the rear of the TV .
3 Knowing your TV’ s features 4 1 2 3 EXIT 5 Con fi rm your TV’s functions Some functions written in this instruction manual may not be available for your TV . Please see the chart below and check the functions that are equipped for your TV’ s model number .
4 Remote control buttons and basic functions 1 6 3 7 9 5 8 2 ! 4 EXIT " No. Press T o 1 POWER T urn on or off the TV from standby mode. 2 MENU/OK Display menu and con fi rm selected function. 3 5 / ∞ / 2 / 3 Select and adjust menu function. 4 CHANNEL -/+ Select the desired channel number .
5 Remote control buttons and basic functions (continued) The following chart shows locations of functions in menus. In this manual, location of a function is described as follows: Note: Some functions have the 4th menus as the sub-menus. How to operate menus and menus locations T o Operation Note Display the MENU Press the MENU/OK button 2 .
6 TV buttons and functions The illustrations shown below is for A V -21BS26 and A V -29SS26 only , which are used for explanation purpose. Y our TV may not look exactly the same as illustrated.
7 2 Connecting the main plug to the AC outlet. Setting up your TV CAUTION • T urn off the equipment including the TV before connecting. VHF/UHF outdoor aerial 75-ohm coaxial cable (not supplied) 1 Connecting the aerial cable. 3 Inserting batteries into the remote control.
8 5 Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by following the steps below: • Press 5 / ∞ button to select your desired language*. • Press 5 / ∞ button to select your desired T eletext language group*.
9 COLOUR SYSTEM Y ou can select the appropriate colour system when the picture is not clear or no colour appears. Press the COLOUR SYSTEM button to select a setting. T o operate this function with a menu: For the colour system in each country or region, see the table below: PICTURE MODE Y ou can choose the desired picture setting with one-touch.
10 PICTURE SETTING Y ou can adjust the desired picture setting when selecting USER in PICTURE MODE. 1 Select USER in PICTURE MODE under PICTURE menu. 2 Select PICTURE SETTING in PICTURE menu, then adjust the setting.
11 AI ECO SENSOR (ECO)/ECO MODE Y ou can adjust TV screen contrast according to the brightness of your room. Press the ECO button to select the desired mode. OFF Cancel the function. MODE-1/ECO-1 Mild contrast (recommended.) MODE-2/ECO-2 Even contrast.
12 PIP Display the sub picture. T o cancel, press the PIP button again. Notes: • Y ou can hear the sound from the main picture only . • When main picture and sub picture are the same TV channel. Press SUB-P -/+ Main picture will be changed TV channel follow as sub picture.
13 Original features for picture (continued) TEXT LANGUAGE Y ou can set the T eletext language group that corresponds to the programmes. Select TEXT LANGUAGE in the INST ALL menu, then choose the desired language group.
14 SOUND SYSTEM Y ou can select an appropriate sound system when abnormal sound occurs even when the picture appears normally . Press the SOUND SYSTEM button to select a setting.
15 CINEMA SURROUND Y ou can enjoy an enhanced sound for wider audience. Press the CINEMA SURROUND button to select a setting. OFF Cancel the function. ON Listen to sound with wider audience effect. This function is not available when SOUND MODE is set to SOUND TURBO.
16 DVD Menu AUTO SIGNAL DETECT When the DVD input signal is detected, the input mode will be changed to VIDEO-2 automatically . And when the DVD input signal is not detected, the input mode will be changed to RF previous input mode. Select AUTO SIGNAL DETECT in DVD MENU under FEA TURES menu then choose ON or OFF (Factory setting is ON).
17 Customized setting VNR Y ou can reduce the picture noise. Select VNR in PICTURE menu, then choose a setting of VNR function. OFF VNR is turned off. AUTO Effect of VNR is automatically controlled. MIN Effect of VNR becomes minimum level. MAX Effect of VNR becomes maximum level.
18 Customized setting (continued) DISPLAY Y ou can display the programme number , video terminal number and PR list on the screen. Press the DISPLA Y button to select the desired mode: Choose a TV channel or a VIDEO terminal. 1 Press the DISPLA Y button to display the PR LIST .
19 To register the TV channels automatically (AUTO PROGRAM) Y ou can register the TV channels into the TV’s channel list automatically . 1 Display the INST ALL menu. 2 Choose AUTO PROGRAM, then press the MENU/OK button. AUT O PROGRAM function starts, and the channels received are registered in the channel list (PR LIST) automatically .
20 To add in the new channel (INSERT in the EDIT menu) Y ou can add in new channels in the TV channel list as you like. You need to fi nd the “CH/CC” number for the TV channel. Find the “CH/CC” number corresponding to the channel number of the TV channel from “CH/CC number list” on page 21.
21 TV channel presetting (continued) CH/CC number When you want to use the INSERT function on page 20, find the CH/CC number corresponding to the channel number of the TV channel from this table. Channel No. Country US United States, Philippines, etc.
22 V L R R L / MONO Y C B C R / V V S OVER L R / MONO OUTPUT VIDEO-1 COMPONENT (VIDEO-2) INPUT INPUT The illustrations shown in this section are for A V -21BS26 and A V - 29SS26 only , which are used for explanation purpose. Y our TV may not look exactly the same as illustrated.
23 T roubleshooting If a problem occurs when you are using the TV , check the below troubleshooting guide before calling for repair . • Colour patches appear at the corner of the screen • This may due to the magnetized device such as a speaker near to your TV .
© 2006 Victor Company of Japan, Limited 0406-FLE-JMT Speci fi cations TV RF systems B, G, I, D, K, M Colour systems P AL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band.
INSTRUCTIONS GGT01 18-001A-H A V -29MS16 A V -29SS16 A V -25MS16 A V -21MS16 COLOUR TELEVISION EQUALIZER • CINEMA SURROUND • COMPONENT INPUT Contents Knowing your TV’ s features ....................................................... 3 Remote control buttons and basic functions .
2 15 cm 10 cm 10 cm 15 cm W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: T O ENSURE PERSONAL SAFETY , OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV . 1 Operate only from the power source indicated on the rear of the TV .
3 Knowing your TV’ s features EXIT RM-C1286 Con fi rm your TV’s functions Some functions written in this instruction manual may not be available for your TV . Please see the chart below and check the functions that are equipped for your TV’ s model number .
4 Remote control buttons and basic functions EXIT RM-C1286 1 6 3 7 9 5 8 2 ! 4 " No. Press T o 1 POWER T urn on or off the TV from standby mode. 2 MENU/OK Display menu and con fi rm selected function. 3 5 / ∞ / 2 / 3 Select and adjust menu function.
5 Remote control buttons and basic functions (continued) The following chart shows locations of functions in menus. In this manual, location of a function is described as follows: Note: Some functions have the 4th menus as the sub-menus. How to operate menus and menus locations T o Operation Note Display the MENU Press the MENU/OK button 2 .
6 TV buttons and functions The illustrations shown below is for A V -21MS16 and A V -29SS16 only , which are used for explanation purpose. Y our TV may not look exactly the same as illustrated. POWER TV/VIDEO MENU/OK CHANNEL VOLUME RV L/MONO IN(VIDEO-3) Front of the TV A V -29SS16 Rear of the TV A V -29SS16 6 , 2 2 , -/.
7 2 Connecting the main plug to the AC outlet. Setting up your TV CAUTION • T urn off the equipment including the TV before connecting. VHF/UHF outdoor aerial 75-ohm coaxial cable (not supplied) 1 Connecting the aerial cable. 3 Inserting batteries into the remote control.
8 5 Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by following the steps below: • Press 5 / ∞ button to select your desired language. • TV will start searching for the channels.
9 COLOUR SYSTEM Y ou can select the appropriate colour system when the picture is not clear or no colour appears. Press the COLOUR SYSTEM button to select a setting. T o operate this function with a menu: For the colour system in each country or region, see the table below: PICTURE MODE Y ou can choose the desired picture setting with one-touch.
10 PICTURE SETTING Y ou can adjust the desired picture setting when selecting USER in PICTURE MODE. 1 Select USER in PICTURE MODE under PICTURE menu. 2 Select PICTURE SETTING in PICTURE menu, then adjust the setting.
11 AI ECO SENSOR (ECO) Y ou can adjust TV screen contrast according to the brightness of your room. Press the ECO button to select the desired mode. OFF Cancel the function. MODE-1 Mild contrast (recommended.) MODE-2 Even contrast. DISPLA Y Display the graphic of the function.
12 SOUND SYSTEM Y ou can select an appropriate sound system when abnormal sound occurs even when the picture appears normally . Press the SOUND SYSTEM button to select a setting.
13 CINEMA SURROUND Y ou can enjoy an enhanced sound for wider audience. Press the CINEMA SURROUND button to select a setting. OFF Cancel the function. ON Listen to sound with wider audience effect. This function is not available when SOUND MODE is set to SOUND TURBO.
14 DVD Menu AUTO SIGNAL DETECT When the DVD input signal is detected, the input mode will be changed to VIDEO-2 automatically . And when the DVD input signal is not detected, the input mode will be changed to RF previous input mode. Select AUTO SIGNAL DETECT in DVD MENU under FEA TURES menu then choose ON or OFF (Factory setting is ON).
15 Customized setting VNR Y ou can reduce the picture noise. Select VNR in PICTURE menu, then choose a setting of VNR function. OFF VNR is turned off. AUTO Effect of VNR is automatically controlled. MIN Effect of VNR becomes minimum level. MAX Effect of VNR becomes maximum level.
16 Customized setting (continued) DISPLAY Y ou can display the programme number , video terminal number and PR list on the screen. Press the DISPLA Y button to select the desired mode: Choose a TV channel or a VIDEO terminal. 1 Press the DISPLA Y button to display the PR LIST .
17 To register the TV channels automatically (AUTO PROGRAM) Y ou can register the TV channels into the TV’s channel list automatically . 1 Display the INST ALL menu. 2 Choose AUTO PROGRAM, then press the MENU/OK button. AUT O PROGRAM function starts, and the channels received are registered in the channel list (PR LIST) automatically .
18 To add in the new channel (INSERT in the EDIT menu) Y ou can add in new channels in the TV channel list as you like. You need to fi nd the “CH/CC” number for the TV channel. Find the “CH/CC” number corresponding to the channel number of the TV channel from “CH/CC number list” on page 19.
19 TV channel presetting (continued) CH/CC number When you want to use the INSERT function on page 18, find the CH/CC number corresponding to the channel number of the TV channel from this table. Channel No. Country US United States, Philippines, etc.
20 V L R R L / MONO Y C B C R / V V S OVER L R / MONO OUTPUT VIDEO-1 COMPONENT (VIDEO-2) INPUT INPUT The illustrations shown in this section are for A V -21MS16 and A V - 29SS16 only , which are used for explanation purpose. Y our TV may not look exactly the same as illustrated.
21 T roubleshooting If a problem occurs when you are using the TV , check the below troubleshooting guide before calling for repair . • Colour patches appear at the corner of the screen • This may due to the magnetized device such as a speaker near to your TV .
© 2006 Victor Company of Japan, Limited 0606-FLE-JMT Speci fi cations TV RF systems B, G, I, D, K, M Colour systems P AL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band.
INSTRUCTIONS GGT0120-001A-H A V -2988SE A V -2986ME A V -2986SE A V -2956BE A V -2956ME A V -2586ME A V -2186ME A V -2156BE A V -2156ME COLOUR TELEVISION EQUALIZER • CINEMA SURROUND • COMPONENT INPUT Contents Knowing your TV’ s features ........
2 15 cm 10 cm 10 cm 15 cm W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: T O ENSURE PERSONAL SAFETY , OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV . 1 Operate only from the power source indicated on the rear of the TV .
3 Knowing your TV’ s features 1 2 3 EXI T Con fi rm your TV’s functions Some functions written in this instruction manual may not be available for your TV . Please see the chart below and check the functions that are equipped for your TV’ s model number .
4 Remote control buttons and basic functions 1 6 3 7 9 5 8 2 ! 4 EXIT " No. Press T o 1 POWER T urn on or off the TV from standby mode. 2 MENU/OK Display menu and con fi rm selected function. 3 5 / ∞ / 2 / 3 Select and adjust menu function. 4 CHANNEL -/+ Select the desired channel number .
5 Remote control buttons and basic functions (continued) The following chart shows locations of functions in menus. In this manual, location of a function is described as follows: Note: Some functions have the 4th menus as the sub-menus. How to operate menus and menus locations T o Operation Note Display the MENU Press the MENU/OK button 2 .
6 TV buttons and functions The illustrations shown below is for A V -2156BE and A V -2988SE only , which are used for explanation purpose. Y our TV may not look exactly the same as illustrated.
7 2 Connecting the main plug to the AC outlet. Setting up your TV CAUTION • T urn off the equipment including the TV before connecting. VHF/UHF outdoor aerial 75-ohm coaxial cable (not supplied) 1 Connecting the aerial cable. 3 Inserting batteries into the remote control.
8 5 Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by following the steps below: • Press 5 / ∞ button to select your desired language. • Press 5 / ∞ button to select your desired T eletext language group.
9 COLOUR SYSTEM Y ou can select the appropriate colour system when the picture is not clear or no colour appears. Press the COLOUR SYSTEM button to select a setting. T o operate this function with a menu: For the colour system in each country or region, see the table below: PICTURE MODE Y ou can choose the desired picture setting with one-touch.
10 PICTURE SETTING Y ou can adjust the desired picture setting when selecting USER in PICTURE MODE. 1 Select USER in PICTURE MODE under PICTURE menu. 2 Select PICTURE SETTING in PICTURE menu, then adjust the setting.
11 AI ECO SENSOR (ECO)/ECO MODE Y ou can adjust TV screen contrast according to the brightness of your room. Press the ECO button to select the desired mode. OFF Cancel the function. MODE-1/ECO-1 Mild contrast (recommended.) MODE-2/ECO-2 Even contrast.
12 PIP Display the sub picture. T o cancel, press the PIP button again. Notes: • Y ou can hear the sound from the main picture only . • When main picture and sub picture are the same TV channel. Press SUB-P -/+ Main picture will be changed TV channel follow as sub picture.
13 Original features for picture (continued) TEXT LANGUAGE Y ou can set the T eletext language group that corresponds to the programmes. Select TEXT LANGUAGE in the INST ALL menu, then choose the desired language group.
14 SOUND SYSTEM Y ou can select an appropriate sound system when abnormal sound occurs even when the picture appears normally . Press the SOUND SYSTEM button to select a setting.
15 CINEMA SURROUND Y ou can enjoy an enhanced sound for wider audience. Press the CINEMA SURROUND button to select a setting. OFF Cancel the function. ON Listen to sound with wider audience effect. This function is not available when SOUND MODE is set to SOUND TURBO.
16 DVD Menu AUTO SIGNAL DETECT When the DVD input signal is detected, the input mode will be changed to VIDEO-2 automatically . And when the DVD input signal is not detected, the input mode will be changed to RF previous input mode. Select AUTO SIGNAL DETECT in DVD MENU under FEA TURES menu then choose ON or OFF (Factory setting is ON).
17 Customized setting VNR Y ou can reduce the picture noise. Select VNR in PICTURE menu, then choose a setting of VNR function. OFF VNR is turned off. AUTO Effect of VNR is automatically controlled. MIN Effect of VNR becomes minimum level. MAX Effect of VNR becomes maximum level.
18 Customized setting (continued) DISPLAY Y ou can display the programme number , video terminal number and PR list on the screen. Press the DISPLA Y button to select the desired mode: Choose a TV channel or a VIDEO terminal. 1 Press the DISPLA Y button to display the PR LIST .
19 To register the TV channels automatically (AUTO PROGRAM) Y ou can register the TV channels into the TV’s channel list automatically . 1 Display the INST ALL menu. 2 Choose AUTO PROGRAM, then press the MENU/OK button. AUT O PROGRAM function starts, and the channels received are registered in the channel list (PR LIST) automatically .
20 To add in the new channel (INSERT in the EDIT menu) Y ou can add in new channels in the TV channel list as you like. You need to fi nd the “CH/CC” number for the TV channel. Find the “CH/CC” number corresponding to the channel number of the TV channel from “CH/CC number list” on page 21.
21 TV channel presetting (continued) CH/CC number When you want to use the INSERT function on page 20, find the CH/CC number corresponding to the channel number of the TV channel from this table. Channel No. Country US United States, Philippines, etc.
22 V L R R L / MONO Y C B C R / V V S OVER L R / MONO OUTPUT VIDEO-1 COMPONENT (VIDEO-2) INPUT INPUT The illustrations shown in this section are for A V -2156BE and A V - 2988SE, which are used for explanation purpose. Y our TV may not look exactly the same as illustrated.
23 T roubleshooting If a problem occurs when you are using the TV , check the below troubleshooting guide before calling for repair . • Colour patches appear at the corner of the screen • This may due to the magnetized device such as a speaker near to your TV .
© 2006 Victor Company of Japan, Limited 0506-FLE-JMT Speci fi cations TV RF systems B, G, I, D, K, M Colour systems P AL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band.
Ein wichtiger Punkt beim Kauf des Geräts JVC AV-29SX76 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC AV-29SX76 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC AV-29SX76 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC AV-29SX76 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC AV-29SX76 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC AV-29SX76 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC AV-29SX76 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC AV-29SX76. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC AV-29SX76 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
