Benutzeranleitung / Produktwartung AV-28WT2EK des Produzenten JVC
Zur Seite of 28
INSTRUCTIONS VICTOR COMPANY OF JAPAN, LIMITED CQ40350-001-E 0497-Ki-AB-JMUK A V-24WT2EK/A V -28WT2EK 1997 VICT OR COMP ANY OF JAP AN, LIMITED COLOUR TELEVISION CONTENTS A V -24W T2EK A V -28W T2EK SAFETY PRECAUTIONS ......... 2 Locations of remote control buttons .
2 Thank you for purchasing this JVC colour television. T o ensure your complete understanding, please read this manual thoroughly before operation. SAFETY PRECAUTIONS W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE T O RAIN OR MOISTURE.
3 Some Do’ s And Don’ts On The Safe Use Of Equipment This equipment has been designed and manufactured to meet international safety standards but, like any electrical apparatus, care must be taken if you are to obtain the best results and safety is to be assured.
4 Locations of remote control buttons 123 456 789 0 P AV TV OK MENU P ZOOM = - 0 1 2 6 7 5 8 3 4 9 ~ P TV OK MENU P VCR TEXT HOLD SUBPAGE MODE REVEAL SIZE STORE CANCEL INDEX ! @ Inserting batteries into your remote control Use two AAA/R03 dry cell batteries.
5 Locations of TV buttons and parts FRONT P ANEL 1 Remote control sensor 2 ECO sensor 3 Headphone jack (mini jack) p.7 4 EXT-3 terminals p.6, 19 5 Volume button p.10 (Press this button to display the volume level indicator . Press the 6 Up/down buttons to change volume while the volume level indicator is displayed.
6 Conditions: • This TV set has external device connectors, EXT -1 to EXT -3 to which you can connect a VCR. However , there are some differences in functions among them. Consult the following table before making connections. • Use headphones with a stereo mini jack (dia.
7 3. Connecting the power cord Insert the power plug into an AC outlet (AC 220 – 240 V , 50 Hz). Devices which can be connected to the terminals on the rear panel Devices which can be connected to t.
8 4. T urning the power and TV on 1. Press the Main power button on the TV to turn the power on. The Power lamp lights red (power on), then green (TV on). If the power lamp stays red and does not change to green: Y our TV is in the standby mode. Press the Standby button on the remote control to turn your TV on.
9 4. Press OK button. Broadcast stations are automatically allocated to the PR channels. The EDIT menu is displayed after the allocation is completed. • If you want to edit PR channels or allocate a station to PR0 (A V) channel, see page 21 “EDIT/MANUAL” for procedural description.
10 T urning the TV and power off 1. Press the Standby button to turn the TV off. The Power lamp changes from green to red. The TV enters standby mode. 2.
11 V iewing images from external devices 1. Repeatedly press the 0 button to select the EXT terminal. The current selection appears, and disappears after several seconds.
12 MUL TI SOUND Y ou can select the multi sound mode for stereo broadcast programmes and bilingual programmes. Note: • The MUL TI SOUND function has no effect on programmes other than A2 or NICAM broadcast programmes. 1. Press OK. The MENU appears. 2.
13 COLOUR SYSTEM The colour system is automatically selected, but if the picture is not clear or no colour appears, select the colour system manually . 1. Press OK. The MENU appears. 2. Press / to select PICTURE SETTING, then press OK. The PICTURE SETTING menu appears.
14 OTHER FEA TURES INFORMA TION Y ou can display the PR LIST or the current time. 1. Press (Information) repeatedly . The display changes cyclically in the following order . About PR LIST : • T en positions including the currently selected PR channel will be displayed as a list.
15 7. Press OK. This completes the setting. Notes: • Y ou cannot select a locked PR channel using the PR channel / buttons. • Even if you can select a locked channel and display it, you can not view the programme of the locked channel. T o view a locked PR channel 1.
16 , : Default position , : The picture is moved from default position. Note: • If you change the ZOOM mode, the picture returns to its default position. Automatic ZOOM selection (AUTO mode) Y ou can set your TV to automatically select the optimum ZOOM mode to suit the picture format.
17 2. Press (TV/text). 3. Select a page number . Browse: Press the PR channel / button on the remote control. Direct selection: Press the number buttons to enter a three-digit page number . Colour button selection: Press a colour button to select the corresponding page number on the bottom line of the screen.
18 LIST MODE If you store the numbers of teletext pages you view often, you can quickly call up a desired teletext page whenever you like. Note: • Y ou can store up to 64 pages in memory . Y ou can store four pages in each channel from 1 to 15 (60 pages), and four pages that are the same for all channels above channel 15 (4 pages).
19 T o give an EXT ID to an EXT input terminal 1. Press OK. The MENU appears. 2. Press / to select EXT SOURCE, then press OK. The EXT SOURCE menu appears. 3. Press / to select EXT SETTING, then press OK. The EXT SETTING menu appears. 4. Press / to select an EXT input terminal.
20 LANGUAGE Y ou can select one of ten languages for the on-screen display . 1. Press OK. The MENU appears. 2. Press / to select INST ALL, then press OK. The INST ALL menu appears. 3. Press / to select LANGUAGE, then press OK. The LANGUAGE menu appears.
21 T o delete a station from a PR channel 1. Press / to select the station you want to delete. 2. Press yellow button. Note: • Stations allocated to PR channels following the deleted PR channel number are shifted back by one to the preceding PR channel number .
22 6. Press OK. Returns to the EDIT menu. Programming a station’s ID manually: Follow the operations below in place of steps 3 thru 5. (1) Press the / button repeatedly to select a character . (2) Press the button to move cursor to input position. • Pressing the button moves the cursor backward.
23 T o manually allocate a station to PR channel (Manual allocation) 1. Press blue button. Y our TV enters the Manual allocation mode. 2. Press / to select a PR channel number . Note: • PR channel number “A V” appears on the screen as PR 0 channel.
24 Action Insert the plug in an AC socket. Press the Main power button (see page 8). Check aerial connections (see page 6). Press the number 0 button to select the correct mode (see page 1 1). Select the correct colour system manually (see page 13). Press the Standby button to turn the power on again (see page 8).
25 Channel table CH -- Channel CH 21 E21 CH 22 E22 CH 23 E23 CH 24 E24 CH 25 E25 CH 26 E26 CH 27 E27 CH 28 E28 CH 29 E29 CH 30 E30 CH 31 E31 CH 32 E32 CH 33 E33 CH -- Channel CH 47 E47 CH 48 E48 CH 49.
26 Model Item AV-24WT2EK AV-28WT2EK TV RF systems CCIR I Colour systems PAL (NTSC 3.58 / 4.43 MHz only in EXT modes) Channels and frequencies E21-E69 Sound-multiplex systems NICAM system Teletext syst.
27.
INSTRUCTIONS VICTOR COMPANY OF JAPAN, LIMITED CQ40350-001-E 0497-Ki-AB-JMUK A V-24WT2EK/A V -28WT2EK 1997 VICT OR COMP ANY OF JAP AN, LIMITED COLOUR TELEVISION CONTENTS A V -24W T2EK A V -28W T2EK SAFETY PRECAUTIONS ......... 2 Locations of remote control buttons .
Ein wichtiger Punkt beim Kauf des Geräts JVC AV-28WT2EK (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC AV-28WT2EK noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC AV-28WT2EK - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC AV-28WT2EK reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC AV-28WT2EK erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC AV-28WT2EK besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC AV-28WT2EK verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC AV-28WT2EK. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC AV-28WT2EK gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
