Benutzeranleitung / Produktwartung 0397MKV*UN*VP des Produzenten JVC
Zur Seite of 68
GV-DS1 JLIP VIDEO CAPTURE DOCKING STATION LYT0002-0J9A GV-DS1 COPYRIGHT© 1997 VICTOR COMPANY OF JAPAN, LTD. EK/EA Printed in Japan 0397MKV * UN * VP VICTOR COMP ANY OF JAPAN, LIMITED INSTRUCTI.
2 Dear Customer , Thank you for purchasing this VIDEO CAPTURE DOCKING ST A TION. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of this product. Using This Instruction Manual • All major sections and subsections are listed in the T able Of Contents ( Z pgs.
3 SAFETY PRECAUTIONS W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTIONS: n T o prevent shock, do not open the cabinet.
4 CAUTIONS DO NOT attempt to insert foreign objects into the connectors, as this can lead to electric shock or fire. If an object is accidentally inserted, unplug it and contact your JVC dealer . Be especially careful with children. If during use you notice that the VIDEO CAPTURE DOCKING ST A TION is damaged, unplug it and contact your JVC dealer .
5 How to handle a CD-ROM ● T ake care not to soil or scratch the mirror surface (opposite to the printed surface). Do not write anything or put a sticker on either the front or back surface. If the CD-ROM gets dirty , gently wipe it with a soft cloth outward from the center hole using a cir cular motion.
6 CONTENTS MAJOR FEA TURES 8 CONTROLS AND CONNECTORS 10 CONNECTIONS (When Using JLIP V ideo Capture Software) 1 2 INTRODUCTION 14 INST ALLA TION (JLIP V ideo Capture Software) 15 HOW TO OPEN THE PROGRAM 16 Preparation .................................
7 JLIP PLA YER SOFTW ARE 34 Using JLIP player software data ........................................... 34 How to store JLIP player software data .....
8 MAJOR FEA TURES Business presentations Images captured from video can be incorpo- rated into business documents to spice up your presentations. Internet homepage Images captured from video can be incorpo- rated in your Internet homepage using image editing software.
9 T wo software programs are provided with the GV -DS1 JLIP package. JLIP Video Capture Software ( Z pg. 12 – 39) JLIP Video Capture Software This is the software described in this manual. Video Capture Facility Video images from video sour ce units such as camcorders or VCRs can be captured as 768 x 552 still images with 16.
10 The controls and connectors marked * can be used only when the GR-DVM1 Digital Camcorder is attached. For details of its operation, read the camcorder instruction manual. CONTROLS AND CONNECTORS * Unlock button * Lock lever * Digital jack Z p. 13 • Connect to the computer ’ s RS-232C terminal (COM port).
11 * DC output jack • For dealer use. * S2 (Video) output jack • Outputs the S-VIDEO signal. (Also compatible with S1 and S2 connectors.) DC input jack Z p. 13 * Remote control sensor • Receives the remote control signals for the attached Camcorder .
12 CONNECTIONS (When Using JLIP V ideo Capture Software) n T o assure safety , make sure all units are turned off before making any connections. n The video images will be displayed on the LCD screen of the attached GR-DVM1. Y ou cannot view the images on the computer screen.
13 JLIP V ideo Capture Docking Station Digital Camcorder AC Adapter/Charger Core filter T o CAPTURE INPUT (EXT .)/ PRINTER connector Other units with video output jack DC cable (provided) Core filter (red) (white) (yellow) AUDIO/VIDEO cable (provided) Core filter T o JLIP jack T o DC output jack 3.
14 INTRODUCTION What is video capture software ? Video capture software is a type of application program that allows you to capture video images from camcorders and VCRs and store them in personal computers running under the Windows T operating system.
15 INST ALLA TION (JLIP V ideo Capture Software) WINDOWS T 95 Refer to the Windows T 95 manual or your computer ’ s manual for details on basic Windows T 95 operating procedures. Installation Procedure This software offers you the choise of viewing on-screen messages in English or French.
16 HOW TO OPEN THE PROGRAM The V ideo Capture software can be started up in the same way as any other program running under Windows. The procedure differs slightly depending on whether you’re using W indows T 3.1 or Windows T 95. Preparation • T urn on your computer .
17 INITIALIZA TION INITIALIZING JLIP The first time you start the Video Capture software, JLIP initialization is required. This sets which of the computer ’ s COM ports (connector into which the RS-232C cable is plugged) is connected to the GV-DS1 JLIP V ideo Capture Docking Station.
18 SELECT UNITS 6 . Call up the " Device Selection " window . 7 . Click the name of the unit required. • The word "VCRCAMERA" appears in the VCR box to indicate the V ideo sour ce unit is now in use. • The word " MODULE " appears in the Video Capture box to indicate the V ideo Capture Docking Station is now in use.
19 HOW TO CLOSE THE PROGRAM Double-click the control menu button in Windows T 3.1 or click " Exit " in the " File (F) " menu. In Windows T 95, simply click the Close button. If you try to close the programme with no image data saved, the message " The album has not been saved.
20 HOW THE DESKTOP WORKS 1 Menu bar Displays function menus. See the next page for detailed information. 2 Control buttons • CAPTURE button ( Z pages 25) Press to CAPTURE a desired image from an image source. When pressed, an index image appears under this button.
21 3 Image display area Each time you press the Capture button an index image is captured into the image area. Up to 99 images can be captured, with up to five images in one horizontal frame. Index images are provided to allow you to confirm that you have captured the images you want.
22 File New Album Open Album Save Album Open JLIP (jlp) File Save As JLIP (jlp) File Save Image As… Exit Ctrl+S Ctrl+A HOW THE DESKTOP WORKS (cont.
23 Window Arrange Index VCR NOTE : Counter reset If you use a DV -format digital camcorder , counter information is represented by the time code written on the tape. Counter reset is not possible. Deletes space when an index image has been deleted ( Z p.
24 VIDEO CAPTURE CAPTURING VIDEO IMAGES There are three capture modes available: Step by Step , Program and Interval. The latter two modes are available only when connected to a JLIP compatible video source unit. Step by Step Capture mode must be used to capture images from a video source unit with no JLIP connector .
25 STEP BY STEP CAPTURE Use the Step by Step Capture mode when you want to: • Capture images from a video source unit with no JLIP connector • Capture images from video units with video output connectors • Capture a smaller number of images • Confirm the images being captured.
26 VIDEO CAPTURE (cont.) AUTOMA TIC CAPTURE Automatic video capture is available only when a JLIP-compatible video source unit is con- nected. There are two types of automatic capture: Program mode and Interval mode.
27 4 Click " Window " — " VCR " to call up the VCR Operation window . 5 Operate the video source unit via the VCR Operation window . 6 Click the " Capture " button on the desired video image, and index image data (80 x 60 pixels) is transferred to the computer .
28 INTERV AL CAPTURE The Interval Capture mode is best suited for capturing images at set intervals from a video source unit with a JLIP connector . VIDEO CAPTURE (cont.) Preparation •Make sure all units are properly connected ( Z p. 12). •Insert a tape into the video sour ce unit.
29 SA VE PICTURE SA VING Select when storing the contents displayed in the image display area (page 21). 1 Open the menu bar and click " File " — " Save Album " . •The " Save Album " window appears. 2 T ype the folder name and title.
30 SELECTING A PICTURE FORMA T Under " Image Format ", you can specify the full image data format and the capture mode. PICTURE FORMA T SETTING 3 Select capture mode. •There are two different settings avail- able: " Frame Picture " and " Field Picture ".
31 DELETE INDEX IMAGE AND FULL IMAGE Y ou can delete any captured picture. Both index image (80 x 60 pixels) and full image (768 x 552 pixels) are deleted. 1 Click the image display box you want to delete. •The box is bordered in green. 2 Open the menu bar and click " Edit " — " Delete ".
32 COUNTER VALUE CHANGE If you want to replace a captured image with a different one, you can capture the new one by changing the counter value. ADDITIONAL OPERA TIONS 1 Click the image display box of the index number you want to change. •The box is bordered in green.
33 OPEN INDEX 1 Open the menu bar and click " File " — " Open Album ". •The " Open Album " window appears. 2 Select the name of the folder (directory).
34 JLIP PLA YER SOFTW ARE USING JLIP PLA YER SOFTW ARE DA T A The GV -DS1 V ideo Capture Docking Station can capture JLIP Player software data at an edit-in point corresponding to a preset counter number . Preparation •Make sure all units are properly connected ( Z p.
35 HOW TO STORE JLIP PLA YER SOFTW ARE DA T A Data from this unit can be converted to JLIP Player software files. If index image data is saved as a JLIP Player software file, the file can be printed with the optional GV-PT2 V ideo Printer . Refer to the instruction manual for details.
36 TROUBLESHOOTING NOTE : External noise or disturbance may interfere with the microprocessors built into the GV -DS1 JLIP V ideo Capture Docking Station. If this happens, turn the power off and then turn it on again. Problem — — 23 10 – 13 18 17 — 23 — — Page No effect when clicking the Input Select/Memory buttons.
37 Problem 25 – 28 32 26 — 17 30 Page Cannot capture video data with the desired counter number . Counter cannot be reset. Program capture suddenly stops. After finishing video capture, the video file remains in the JCPT folder (where the program run file is contained).
38 LIST OF ERROR MESSAGES v Appears when: m Action: Message COM port is not available. Connected device not found. Error — T ransfer halted. v Not connected to COM port set by JLIP Initialize. m Check the COM port number and connector and retry JLIP initialization.
39 v Appears when: m Action: Message Execute after playing back the VCR. Not enough disk space is available. Communication error . Check the capture device. v V ideo unit is not in Play mode during Interval Capture. m Click "OK", set the video unit to Play and click " T ransfer " again.
40 MEMO.
41 JLIP PLA YER SOFTW ARE SECTION q The Readme.TXT file provides additional information for setup and information that is not included in the instruction manual. Please read the file before installing the provided software program. q Y ou can find the latest information (in English) on the provided software program at our www server .
42 CONNECTIONS (When Using JLIP Player Software) WHEN CONNECTING TO A VIDEO SOURCE UNIT WITH JLIP CONNECTOR OR TO A VIDEO PRINTER n Be sure to turn off the power of all connected units before making any connections. n When connecting the provided cable, be sure to connect the plug with the Core Filter to the Video Capture Docking Station.
43 JLIP Core Filter Digital camcorder T o JLIP jack AC Power Adapter/Charger DC cord Core Filter JLIP V ideo Capture Docking station T o edit jack To S output jack Core Filter T o video/ audio output .
44 GETTING ST ARTED What is JLIP ? JLIP* stands for Joint Level Interface Protocol, a new communication protocol which allows A V units equipped with a JLIP terminal to be controlled by a personal computer . * is a registered trademark of JVC. Operating Environment ● Personal computer with Microsoft T Windows T 3.
45 INST ALLING (JLIP Player Software) WINDOWS T 95 Refer to the Windows T 95 manual or your computer ’ s manual for details on basic Windows T 95 operating procedures. Installation Procedure This software offers you the choise of viewing on-screen messages in English or French.
46 ST ARTING JLIP PLA YER SOFTW ARE MOVIE PLAYER Serial Port Selection Select a Serial Port. OK CANCEL COM 1 COM 2 COM 3 COM 4 Initializing JLIP Now checking devices' ID ... ID:10 Starting JLIP Player Software 1 PREP ARE DEVICE(S) T urn the device(s) on and set the camcorder's Power Dial to "PLA Y".
47 •An error message " No devices detected to connect. Power ON all devices in system. " appears . . . ... when a wrong port number is selected. ... when the connection is wrong. ... when the device's ID number is already in use. ... when the device's power is not turned on.
48 MOVIE PLA YER FILE POWER PROGRAM PLAYBACK COUNTER Non Drop MEMO ID SCENE CUT IN CUT OUT START SCENE ELAPSED TIME 00:00:00:00F IN/OUT OFF ON MODE STILL PLAY SEARCH SLOW FF REW 00:00:00:00F 06 File Video Printer Help Edit MOVIE PLA YER WINDOW BUTTONS AND DISPLA YS 5.
49 1. COUNTER system 2. T ape counter display • Displays actual tape position. ex. 00: 01: 45: 10F (Hours : Minutes : Seconds : Frames) 3. ID number • Displays the selected device's ID number . 4. FILE name • Displays file name after saving the program under a new name.
50 BASIC OPERA TIONS Setting in/out points 1 PLA YBACK ON TV MONITOR Click © . Playback picture appears on the TV monitor . 2 SET CUT IN/OUT POINTS Select "Set Function" from "Edit" in the Movie Player window and select "Edit T ape".
51 Playing back all programmed scenes 1 ST ART PLA YBACK Click "ST AR T". •The camcorder plays back scenes in numerical order and stops immediately after the last scene's CUT OUT point. •Only the camcorder moves. NOTES: ● During playback of programmed scenes, do no operation other than pressing "STOP".
52 BASIC OPERA TIONS (cont.) Dubbing Y ou can record all programmed scenes onto the tape in the recording deck. Dubbing is possible only when the GR- DVM1 is connected. (as of March, 1997) 1 PREP ARE NEW T APE Make sure the erase protection tab on the tape is present.
53 Saving the program list on hard disk It is possible to save all programmed scene information as a file in the computer . 1 ST ART SA VING Select " Save As " from "File" on the MOVIE PLA YER window . •The " Save a program list " dialog box appears.
54 BASIC OPERA TIONS (cont.) Opening a file saved on floppy disk 1 INSERT FLOPPY DISK INTO DRIVE 2 SELECT DRIVE NUMBER Click Ä in "DRIVE". 3 LOOK FOR FILE NAMES Open "tape" in the directry . 4 SELECT FILE NAME Follow steps 2 and 3 in "Opening a saved file" on the left.
55 T ransferring the programmed scene to an other position 1 DESIGNA TE SCENE TO BE TRANSFERRED Click on the scene you want to transfer and choose "Cut" from "Edit". •The message " Scene No. will be deleted. " appears. T o cut, click on "OK".
56 VIDEO PRINTER WINDOW BUTTONS AND DISPLA YS Video Printer POWER SELECT PIX STABILIZER OFF ON POSITION ID 20 STORE PRINT SOURCE MEMORY CLOSE STROBE SPEED HIGH LOW 16 4 OFF STROBE SELECTED SAME MULTI-PIX CONTENT Aperture Off ! ! OFF ON Title bar 9. STORE button 10.
57 1. POWER button • T urns the device on and off. 2. POSITION button • Selects the position to store a scene in memory for Multi-Print. 3. ID number • Displays the selected device's ID number . 4. Message display • Displays the operating mode of the selected device.
58 VIDEO PRINTER OPERA TION (GV -PT2) Printing Before printing, perform the procedure listed below . ● Connect to image and sound source ( Z pg. 42, 43). ● Set VCR to external input. ● Set TV to VIDEO mode so that images from video printer appear .
59 Quitting the MOVIE PLA YER window 1 CHOOSE "EXIT" FROM "FILE" •The MOVIE PLA YER window closes. Quitting the "Video Printer" window 1 CLICK "CLOSE" •The "V ideo Printer" window closes.
60 VIDEO PRINTER OPERA TION (GV -PT2) (cont.) Auto Capture 1 Select " V ideo Printer " — " Set-up " in the MOVIE PLA YER window . •V ideo Printer window appears. 2 Select the number of scenes (OFF/4/16) and select " SAME " or " SELECTED " for the content.
61 3 Click T itle in the MOVIE PLA YER window and activate the window . 4 Select " Edit " — " Set Function " — " Auto Capture ". 5 Click " ST ART " •The captured video data set first is sear ched and stored in the video printer .
62 ADV ANCED OPERA TIONS Changing ID number The device's ID number is preset at factory as follows: ex. Camcorder: 06 or 07 Video printer: 20 When connecting more than two same type devices, the same ID numbers will exist and a malfunction can occur .
63 Changing the name of the device 1 ACCESS "NAME CHANGE" DIALOG BOX Choose "Name Change" from "File" on the MOVIE PLA YER window . •The "Name Change" dialog box appears. 2 SELECT DEVICE Click on the name of the device and "CHANGE".
64 ADV ANCED OPERA TIONS (cont.) Adjusting the gap between the stored edit-start point in the computer and the dubbed one in the recording deck During dubbing, the beginning of the scene stored in the computer can be missed or the scene prior to the transition you chose for the edit-start point can be dubbed into the recording deck.
65 TROUBLESHOOTING Error – – This application will close. Check devices – – Confirm that power is ON. No devices detected to connect. Power ON all devices in system. Communication error (&H (number)) Check cable connection. Select the device to control.
66 MAJOR SPECIFICA TIONS JLIP VIDEO CAPTURE DOCKING ST A TION Connectors S-V ideo : Output Y : 1.0 Vp-p, 75 ohms (S2 output) C : 0.3 Vp-p, 75 ohms V ideo : Input 1.
67 INDEX A Arrange Index ................................. Z pg. 31 Automatic Capture (AUTO) ....... Z pg. 26, 28 B Bitmap ...................................... Z pg. 24, 30 C Capture Mode ................................. Z pg. 30 Change ID ........
GV-DS1 JLIP VIDEO CAPTURE DOCKING STATION LYT0002-0J9A GV-DS1 COPYRIGHT© 1997 VICTOR COMPANY OF JAPAN, LTD. EK/EA Printed in Japan 0397MKV * UN * VP VICTOR COMP ANY OF JAPAN, LIMITED INSTRUCTI.
Ein wichtiger Punkt beim Kauf des Geräts JVC 0397MKV*UN*VP (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC 0397MKV*UN*VP noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC 0397MKV*UN*VP - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC 0397MKV*UN*VP reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC 0397MKV*UN*VP erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC 0397MKV*UN*VP besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC 0397MKV*UN*VP verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC 0397MKV*UN*VP. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC 0397MKV*UN*VP gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
