Benutzeranleitung / Produktwartung JLTDC11 des Produzenten John Lewis
Zur Seite of 32
JLTDC11 Condenser dryer with heat pump Instruction manual.
Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, o.
• If you have washed your laundry with stain remover you must execute an extra rinse cycle before loa ding your tumble dryer. • Please make sure tha t no gas lighters or matches have a ccidentally.
• Fabric softene rs, or similar products should be used as specified by the fabric softene r instructions. • Caution - hot surface : Do not touch the door light cover surface when the light is switched on.
product is disposed of corre ctly, you will help prevent potential negative consequen ces for the environment and h uman health, which could otherwise be caused by inappropriate waste handling of this product.
Contents For the user Important safety information 2 Description of the appliance 7 Control panel 8 Before first use 8 Programme chart 9 Sorting and preparing laundry 1 0 Daily use 11 Switching machin.
Description of the appliance 1 4 6 8 11 12 2 3 5 7 9 10 1 Control panel 2 Water reservoir 3 Drum light 4 Fine fluff filter 5 Fluff filter 6 Loading door (re versible) 7 Rating plate 8 Course fluff fil.
Control panel 1 234 5 6 7 8 9 1 0 1 Programme selector and Off switch 2 Extra delicate button 3 Intensive button 4 Anti-crease button 5 Alarm button 6 Time button 7 Display ( Dry time ) 8 Start/Pause .
Programme chart Programmes max. load (weight when dry) Additional functions/options Application/properties Extra delicate Intensive Anti-crease Alarm Time Delay sta rt Cottons Extra dry 7 kg - • • • - • Thorough drying of t hick or multi- layered fabrics, e.
Programmes max. lo ad (weight when dry) Additional functions/options Application/properties Extra delicate Intensive Anti-crease Alarm Time Delay start Wool care 1 kg - - - • - • For briefly treating woollens with warm air, after they have been dried naturally, wo rn or stored for long periods.
Daily use Switching machine on Turn the programme selector to any programme. The machine switches on. When the loading door is open, the internal lamp illuminates the drum. Door opening and laundry loading 1. Open loading door: Push against the loading door (push point) 2.
To deselect the function press the Extra delicate button again. LED above is off. Intensive If the laundry i s still damp after a standard drying programme, you can increase the drying result by using the Inten sive function. 1. Choose the drying programme.
1. Turn the programme selector to the Time programme. The flashing 10' above the Time button is on. 2. Press the Time button repeatedly un til the desired progr amme duration is sho wn in the display, e.g. 20 for a programme of 20 minutes. If the programme duration is no t selected, the duration is automatica lly set to 10 mins.
Starting the programme Press the Start/Pause button. The programme starts. The programme progress is shown by elapsing Dry time on LCD. Changing programme To change a programme which has been selected by mistake once the programme has started, first turn the programme selecto r to Off and then reset the programme.
The drying cycles are automatically followed by an anti-crease phase which lasts around 30 minutes. The drum rotates at intervals during this phase. This keeps the laundry loose and free of cr eases. The laundr y can be removed at any time during the anti- crease phase.
4. Push down the unlock button on the large mesh filter. The large mesh filte r pops up. 5. Take out fin e filter. 6. Remove the f luff from fine filter.
If the fine filter is n ot fitted, the large mesh filter will not snap into place a nd the loading door cannot be closed. Cleaning the door seal Wipe the door s eal with a damp cloth immediately after the drying cycle has finished. Emptying the water reservoir Empty the water reservoir after every drying cycle.
Cleaning heat exchanger filters If the warning lamp Con denser lights, the heat exchanger fluff filters in the base of the appliance must be cleaned, i.e. after each 5 drying cycles. Both filters are located in the appliance base. Water can collect in the f ilter housing therefore it is normal for the heat exchanger fluff filte rs to become wet.
4. Use a damp han d to remove the fluff from the filter in the base . If necessary pull out and clean the filter with warm water using a wiper or brush. Clean the i nside of the door, the fluff fil ter chamber and the rubber seals of fluff. Insert the fluff filter to the base.
Clean operating screen and housing Caution! Do not use furniture cleaners or aggressive cleaning agents to clean the mach ine. Use a damp cloth to wipe down the operating screen and h ousing. What to do if ... Problem 1) Possible cause Remedy Dryer does not work.
Drying cycle to short Small laundry volume./Too dry laundry for selected programme. Select time programme or higher drying level (e.g. Extra dry). Drying cycle to long 5) Fluff filters clogged. Clean fluff filters. To high loading volume. Respect max.
Adjusting the level of conductivity Water contains, a variable quantity of limestone and mineral sa lts of wh ich quantities vary according to geographical locations thus varying its conductivity values.
Technical specifications This appliance conforms with the following EU Directives: – 2006/95/EC dated 12.12.2006 Low Vo ltage Directive – 89/336/EEC dated 03.05.1989 EMC Dir ective inclusive of Amending Directive 92/31/EEC – 93/68/EEC dated 22.07.
Installation Transporting the appliance Important! Only tip the appliance on its left side to transport (see illu stration), if it cannot be transported in an upright position. Appliance positioning • It is recommended that, for your convenience, the machine is positioned close to your washing machine.
Important! • The appliance should not be installed in an environment such as a unhe ated garage or outbuilding. The combination of h igh humidity and low ambien t temperatures could affect the performance or the appliance and therefore invalidate your guarantee.
Warning! THIS APPLIANCE MUST BE EARTHED. Should the appliance power supply cable n eed to be replaced, this must be carri ed out by a Service Force agent (see chapter: Repairs - after sales service). The manufacturer declines any liability should this safety measure not be observed.
Warning! The manufacturer declines any responsibility for damage or injury throu gh failure to comply with the above safet y precautions . Should the applian ce power supply cable need to be replace d, this must be carried out by ou r Service Centre. Warning! The power supply cable must be accessible after installing the machin e.
even if the appliance is un der guarantee. Spare parts Always insist o n genuine spare parts. An authorised service engin eer should service this product, and only genuine spare parts should be used. Unde r no circumstances should you attempt to repair the appliance yourself.
29.
30.
31.
John Lewis Partne rship 171 Victoria Street London SW1E 5NN www. johnlewis.com 136909381-00-102009.
Ein wichtiger Punkt beim Kauf des Geräts John Lewis JLTDC11 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie John Lewis JLTDC11 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für John Lewis JLTDC11 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von John Lewis JLTDC11 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über John Lewis JLTDC11 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon John Lewis JLTDC11 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von John Lewis JLTDC11 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit John Lewis JLTDC11. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei John Lewis JLTDC11 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
