Benutzeranleitung / Produktwartung JP760 des Produzenten Janome
Zur Seite of 46
INSTRUCTION BOOK Model JP760.
IMPORT ANT SAFETY INSTRUCTIONS When using an electrical appliance, basic safety precautions should always be followed, including the followings: Read all instructions before using this appliance. DANGER — To reduce the risk of electric shock: 1. An appliance should never be left unattended when plugged in.
1 KNOW YOUR MACHINE Name of Parts ........................................................... 2 Setting the Spool Pin ................................................. 2 Standard Accessories ............................................... 3 Extention T able .
2 KNOW YOUR MACHINE Name of Parts q Direct pattern selection buttons w Indicator window e Bobbin winder stopper r Bobbin winder spindle t Spool pin (included in accessory bag) y Bobbin winding thread .
3 q Needles w Bobbin e Screwdriver r Seam ripper t Spool holder y Spool pin u Additional spool pin i Felt o Satin stitch foot !0 Automatic buttonhole foot !1 Instruction book !2 Power supply cord !3 Foot control Extention T able The extension table provides an extended sewing area and can be easily removed for free arm sewing.
4 W ARNING: While in operation, always keep your eyes on the sewing area, and do not touch any moving parts such as the thread take-up lever , handwheel or needle. Always turn off the power switch and unplug from the power supply: - when leaving the machine unattended.
5 Controlling Sewing Speed Speed control slider Y ou can limit the maximum sewing speed with the speed control slider according to your sewing needs. To increase sewing speed, slide it to the right. To decrease sewing speed, slide it to the left. Foot control Pressing on the foot control can vary sewing speed.
6 e Auto-lock button When stitch pattern #01, #05 or #10 has been selected, the machine will immediately sew locking stitches and automatically stop when the auto-lock button is pressed. When sewing any other stitches, the machine will sew locking stitches at the end of the pattern being sewn and automatically stop.
7 t Stitch width adjusting button When pressing this button,the stitch width of the selected pattern will be indicated and the green light on the top left will light up. To alter the stitch width, press on the "+" or "–" sign. The stitch width can be altered while stitching .
8 Changing the Presser Foot CAUTION: T urn OFF the power switch before changing the foot. Always use the proper foot for the selected pattern. The wrong foot can cause the needle to break. Do not push the lever down to prevent it from being broken. To snap off: Raise the needle and presser foot.
9 Balancing Thread T ension The thread tension should be adjusted depending on the sewing materials, layers of fabric and sewing method. To adjust the thread tension, turn the tension dial. q T ension regulating dial w Setting mark Balanced tension: The ideal straight stitch has threads locked between two layers of fabric.
10 Changing Needles W ARNING: Always make sure to turn the power switch off and disconnect the machine from power supply before changing the needle. Raise the needle by turning the handwheel and lower the presser foot. T urn off the power switch. z Loosen the needle clamp screw by turning it counterclockwise.
11 W inding the Bobbin Removing the bobbin Push the hook cover plate release button to the right and remove the cover plate. q Hook cover plate release button w Hook cover plate Lift out the bobbin. e Bobbin Setting the spool Place a spool of thread on the spool pin with the thread coming off the spool as illustrated.
12 Threading for bobbin winding Set the speed control lever at . z Hold the thread with both hands and pass the thread under the thread guide. q Thread guide x Draw the thread toward you and guide the thread around the bobbin winding thread guide.
13 Inserting the bobbin z Place the bobbin in the bobbin holder with the thread running off counterclockwise. q Thread w Bobbin holder x Guide the thread into the notch on the front of the bobbin holder . e Notch on the front c Draw the thread to the left, sliding it between thetension spring blades.
14 Raise the presser foot. Press the Up/Down needle button to raise the thread take-up lever to its highest position. z Draw the thread from the spool and pass it under the thread guide. q Thread guide x Draw the thread down along the right channel and pull it up around the bottom of the thread guide plate.
15 Needle Threader z Raise the needle to its highest position. Pull down the needle threader knob as far as it will go. q Threader knob x Turn the knob in the direction of the arrow in the illustration, then insert hook into the needle eye. Lead the thread around guide and under hook.
16 Drawing Up the Bobbin Thread z Raise the presser foot lifter . T urn the power switch on. Hold the needle thread with your finger q Presser foot lifter w Needle thread x Press the up/down needle button twice to pick up the bobbin thread. Draw up the needle thread to bring up a loop of the bobbin thread.
17 BASIC STITCHES Straight Stitch To sew Raise the presser foot and position the fabric next to a seam guide line on the needle plate. Lower the needle into the fabric where you wish to start. Pull the needle and bobbin threads to the back. Lower the presser foot.
18 Altering the needle drop position The needle drop position of the following stitches can be altered: Press the stitch width adjusting button to change the needle drop position. The top green light will light up and the preset value "2.5" (center needle position) will be indicated.
19 Sewing from the edge of thick fabric The black button on the zigzag foot locks the foot in the horizontal position. This is helpful when starting sewing from the extreme edge of thick fabrics or sewing across a hem. Lower the needle into the fabric at the point where you wish to start sewing.
20 #01 Straight stitch Presser foot: Zigzag foot A Thread tension: 2 – 6 Use this stitch for seaming and for zipper sewing. #03 Lock-a-matic stitch Presser foot: Zigzag foot A Thread tension: 2 – 6 Use this stitch to secure the beginning and the end of a seam with backstitching.
21 Altering the stitch length The stitch length can be altered between 0.0 and 4.0. Press the stitch length adjusting button to alter the stitch length. The bottom green light will light up and the preset value "2.0" will be indicated. Press on the "+" sign to increase the stitch length.
22 Multiple Zigzag Stitch (T ricot Stitch) This stitch is used to finish a raw edge of synthetics and other stretch fabrics that tend to pucker . Sew along the fabric edge leaving an adequate seam allowance. After sewing, trim the seam allowance close to the stitches.
23 Buttonholes V ariety of buttonholes #16 Square buttonhole This square buttonhole is widely used on medium to heavy weight fabrics. The buttonhole size is automatically determined by placing a button in the rear of the foot.
24 To sew z Press the up/down needle button to raise the needle. Attach the automatic buttonhole foot R snapping the pin into the groove of the foot holder . q Groove w Pin x Pull the button holder to the back, and place the button in it. Push it together tightly to the button.
25 b Start the machine to sew the buttonhole. The buttonhole will be automatically sewn. Step 1 : The machine will sew the front bartack and the left row first. Then it goes back to the starting point with straight stitch. Step 2 : The machine will sew the right row .
26 Altering the buttonhole width Press the stitch width adjusting button to change the buttonhole width. Press the on the "+" sign to increase the buttonhole width. Press the on the "–" sign to decrease the buttonhole width. q Narrower buttonhole w Wider buttonhole * The width can be altered between 2.
27 Round-end buttonhole Press the stitch width adjusting button to change the buttonhole width. Press on the "+" button to increase the buttonhole width. Press on the "–" button to decrease the buttonhole width. q Narrower buttonhole w Wider buttonhole * The width can be altered between 2.
28 Knit buttonhole The knit buttonhole will be sewn in the following sequence: Step 1 : The machine will sew straight stitches to the back end of the buttonhole, then left row . Step 2 : The front bartack Step 3 : The straight stitching to the back end of the buttonhole, then back bartack and the right row .
29 b Remove the fabric from the machine and cut the sewing threads. n Pull the left end of the filler cord to tighten it. Thread the end of the cord through a darning needle and draw it to the wrong side of the fabric and cut. Corded buttonhole To sew a corded buttonhole, follow the same procedure as for a square buttonhole.
30 z Pull the Button Holder all the way out. Insert the fabric under the foot. Press the up/ down needle button twice. Remove the fabric to the left to draw the needle thread through the hole of the foot. x Insert the garment under the foot, and lower the needle at the starting point.
31 Button Sewing Unthread the needle thread. Place a button on the fabric and lower the needle by turning the handwheel, so that the needle enters into the left hole in the button. Align the holes in the button with the slot on the foot and lower it to hold the button in place.
32 Zipper Sewing Attaching the zipper foot (optional item) (A) Attach zipper foot E with the pin on the right- hand side to the groove to sew the left side of the zipper . (B) Attach zipper foot E with the pin on the left- hand side to the groove to sew the right side of the zipper .
33 m x c v b n !0 i o x Place zipper teeth next to margin edge and baste the zipper tape to the lower fabric layer . Align zipper foot with margin edge. Return thread tension and stitch length to original settings. Sew a seam the entire length of zipper tape.
34 Blind Hemming Machine setting q Stitch pattern: #15 or #14 w Presser foot: Zigzag foot A e Thread tension: 3 – 6 z On heavy weight fabrics that ravel, the raw edge should be overcast first. Fold the hem under the fabric as illustrated for fine or medium fabrics.
35 Eyelet Machine setting q Stitch pattern: #21 w Presser foot: Satin stitch foot F e Thread tension: 1 – 4 The Eyelet is used for belt holes etc. The machine will sew an eyelet and will stop automatically when completed. Open the eyelet with an awl, puncher or pointed scissors.
36 Patchwork Machine setting q Stitch pattern: #28, #51 or #53 w Presser foot: Satin stitch foot F e Thread tension: 1 – 4 Applique Machine setting q Stitch pattern: #22 – #25 or #45 w Presser foot: Satin stitch foot F e Thread tension: 1 – 4 Place the applique on the fabric and baste it in place.
37 Smocking Machine setting q Stitch pattern: #29 w Presser foot: Satin stitch foot F e Thread tension: 3 – 6 Smocking is a delicate, decorative treatment on children’s clothes or women’s blouses. Choose a soft, lightweight fabric such as batiste, gingham or challis.
38 Decorative Satin Stitches Machine setting q Stitch pattern: #30 – #39 w Presser foot: Satin stitch foot F e Thread tension: 1 – 4 Determine the appropriate stitch density by test sewing. For a delicate appearance on fabric such as chiffon, use a single layer with a tear-away backing, if necessary .
39 Cross Stitch Machine setting q Stitch pattern: #47 – #50 w Presser foot: Satin stitch F e Thread tension: 3 – 6 Fagoting Machine setting q Stitch pattern: #44 w Presser foot: Zigzag foot A e Thread tension: 3 – 6 Use this stitch to join two pieces of fabric to create an open work appearance, and add design interest.
40 Pattern Combination To combine 2 units of pattern #32 and one unit of pattern #39: z Sew pattern #32 and press the auto-lock button while sewing the second unit. The machine will stop automatically when the second unit is completed. q Auto-lock button x Select pattern #39.
41 CARE AND MAINTENANCE W ARNING: T urn the power switch off and unplug the machine before cleaning. NOTE: Do not dismantle the machine in any way other than what is explained in this section. Clean the outside of the machine with a soft cloth and mild soap.
42 The start/stop button is pressed with the foot control being connected. The foot control is connected or disconnected while sewing. Disconnect the foot control.
43 Condition Cause Reference The needle breaks. Skipped stitches Seam puckering The cloth is not fed smoothly . The needle thread breaks. The bobbin thread breaks. 1. The needle thread is not threaded properly . 2. The needle thread tension is too tight.
806-800-000 (E) Printed in Taiwan.
Ein wichtiger Punkt beim Kauf des Geräts Janome JP760 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Janome JP760 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Janome JP760 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Janome JP760 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Janome JP760 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Janome JP760 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Janome JP760 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Janome JP760. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Janome JP760 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
