Benutzeranleitung / Produktwartung WS-01 des Produzenten Ipevo
Zur Seite of 34
Wir eless St ation for USB Document C am WS-01 User Manual.
Package Contents Your package should contain the following: • Wireless Station and attached USB cord • 1.5m USB extension cable and AC power adapter • User Manual (this document) Congratulations on your purchase of the WS-01 Wireless Station for USB Document Cameras.
• Stream live images from Ziggi or P2V to iPad, PC or Mac via Wi-Fi • Upgrade your Ziggi or P2V to a Wi-Fi enabled wireless document camera • Take advantage of the free Whiteboard App to further enhance your doc cam's use on the iPad • Use the station as a USB drive or USB card reader with the built-in SD card slot.
3. Getting to know your WS-01 USB Charging Connector Power Button LED Indicators SD Card Slot Reset Button USB Port LAN Port 3.
LED Indicators: Lights indicate activity in four areas: Battery/Power, LAN, SD Card, and Wi-Fi. USB Port: Connect your Ziggi or P2V for live streaming, or connect a USB drive for file sharing. LAN Port: Plug in an Ethernet cable (not included) to connect to your existing internet network.
4. Understanding the LED indicators The color (red or blue) and frequency (solid or blinking) of the WS-01's LED indicators will tell you more about the device's status.
Charge WS-01’s built-in battery prior to powering up the device for the first time. This ensures the battery will have sufficient power. 5. Charging Your WS-01 1. Connect the built-in USB connector to the included power adapter, then connect the power adapter to an outlet.
Battery Tips: Important Caution! • Charging to full will take approximately 6 hours, or more if you are using the WS-01 while charging. • The WS-01's 3300mAh battery will power the device for about 4 hours before requiring a charge. • A blinking red battery/power LED means your battery is low.
WS-01 is compatible with iPad, PC and Mac, and can be installed following these steps: 6. Setting Up Your WS-01 SD CARD LAN /POWER Connect USB Cable 8 Turn on WIFI 1. Press the power button and hold for 2 seconds. The Wi-Fi indicator will flash from red to blue.
7. Installing your WS-01 IPEVO WS-01_3524 SSID: MAC Address: 0123456789ab 25123B01234 On iPad: 1. Go to the Apple App Store on your iPad. On App Store, search for and install the free “ IPEVO Whiteboard ” app. 9 3. Launch IPEVO Whiteboard and follow the onscreen guide to access WS-01’s features.
4. a) Tap the Wireless Station icon and b) Select WS-01 under available wireless stations. The menu bar next to Wireless Station should then expand once WS-01 is selected.
5. Use the icons on the extended menu to view Live View, access data and settings. Live View: View the live feed from your Document Camera Storage: Access files stored on WS-01 wirelessly Settings: Ac.
10.10.10.1 Enter IP address On Mac or PC: 1. Browse your available wireless networks and connect to WS-01's SSID (SSID can be found on the label located on the bottom of the device). IPEVO WS-01_3524 SSID: MAC Address: 0123456789ab 25123B01234 2.
3. Enter the login password at the prompt, which by default is " admin ". 4. Click on "Live View" on the Settings page to access the video stream and related options.
5. In the top right-hand corner of the video stream window is an icon with 4 arrows. Click this icon to enlarge the video screen. 14.
On iPad: Using the IPEVO Whiteboard App to access Data Sharing 1. Connect to WS-01 (follow the steps on Page 9) and launch the IPEVO Whiteboard App. 2. Select WS-01 under Wireless Stations (follow the steps on Page 10). 3. On the extended menu bar, tap the Disk icon to access files stored on WS-01.
On Mac or PC: Using your Browser to access Data Sharing 1. Click "Wireless Disk" on the Settings Page to access and manage the SD Card’s or USB Drive's data. (See Page 12 for accessing the Settings Page.) 2. Click on the SD Card or USB Drive image.
3. Use the four icons above the file list to manage the data: Home: Return to the root directory Up: Go up one level to the parent directory Delete: Checkmarked files will be deleted Download: Download checkmarked files.
Your computer/iPad will lose its connection to the internet once you connect to WS-01. However, WS-01 will act as a bridge from your computer/iPad to your interent-enabled network.
1. Please make sure your iPad, Mac or PC is connected to WS-01. To connect WS-01, please follow the steps starting on Page 8. 19 In IPEVO Whiteboard In your Browser 2.
3. Under “Wireless Connection,” select “On.” If a wired connection is preferred, please select “Off (Ethernet Cable)” and plug an Ethernet cable (not included) into the LAN port. 4. A list of available Wi-Fi networks will appear. Select your network.
5. Enter the password for your network and click OK. 6. A pop-up window will appear. Please click "Restart" to restart WS-01 and complete the process, or click "Later" to manually restart WS-01 later. WS-01 will connect to your network in 30 seconds.
To prevent unwanted access of your Live View and files, secure your WS-01 Wi-Fi network by adding a password using the Wireless Password function. 10. Securing your WS-01 Wireless Network 1. To set your Wireless Password, access the WS-01 Settings page (see Page 12).
Set a new password for accessing the Settings Page. An additional 8 guest users can be added. Guest users will have access to the SD Card data and Live View, but will not have access to Internet Connection, Admin Password, Wireless Password, or Advanced Settings.
You can use Apple TV Airplay to wirelessly project live action from the IPEVO Whiteboard onto the big screen. 12. Using Apple TV Airplay 24 Ziggi or P2V iPad Apple TV Projector WS-01 Follow these steps to project live action from your Document Cam using Apple TV Airplay: 1.
3. Turn on the Airplay mode in Apple TV. 4. Double tap the Home button on your iPad to bring up the Multitasking Bar. Swipe to move to the left of the Multitasking Bar, tap the Airplay button, and select Apple TV in the pop-up menu. Note: AirPlay is only available when both iPad and AppleTV are connected to WS-01.
13. FAQ 26 • I forgot my network name (SSID) or Admin password. Use a pin or paper clip to press the Reset button on WS-01 to reset the device. WS-01 will reboot after 3-5 seconds. It takes about 100 seconds for WS-01 to complete the booting process.
• I am looking for more networks settings on WS-01. Follow the steps on Page 12 to access WS-01 settings. Hit "Advanced Settings." You should find more options under Advanced Settings. Please consult your internet administrators for Advanced Settings regarding network connection.
• What is the battery life for different charge times? • Can I charge WS-01 via a computer's USB port? Yes, but charging via a computer's USB port is slower than charging via AC adapter. WS-01's Wi-Fi will be disabled when plugged into a USB port and will turn into an SD card reader.
14. Troubleshooting · Make sure your doc cam is connected to the USB port of WS-01. · Make sure your iPad is connected to WS-01 via Wi-Fi. Follow the steps on Page 9. · Shut down the device and restart. · Remove the doc cam and then reconnect its USB cable.
· Press and hold the power button for 3 seconds then release to force shutdown of WS-01. • I cannot turn off my WS-01. · Go to the Internet Connection page (See Page 18), and click the "Refresh Network List" button. See if your network name appears.
31 15. Federal Communication Commission Interference Statement . Reorient or relocate the receiving antenna. . Increase the separation between the equipment and receiver. . Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
32 FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices).
Customer Service (International) Email: service@ipevo.com Tel: +886-2-5550-8686 Customer Service (USA) Email: cs@ipevo.com Tel: +1-408-490-3085.
Ein wichtiger Punkt beim Kauf des Geräts Ipevo WS-01 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Ipevo WS-01 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Ipevo WS-01 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Ipevo WS-01 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Ipevo WS-01 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Ipevo WS-01 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Ipevo WS-01 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Ipevo WS-01. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Ipevo WS-01 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
