Benutzeranleitung / Produktwartung PCM-9387 des Produzenten Intel
Zur Seite of 110
PCM-9387 Celeron ® M 3.5" SBC with PC/104+/VGA/LCD/L VDS Ether- net/USB2.0 and SSD User ’ s Manual.
PCM-9387 User’s Manual ii Copyright This document is copyrighted, © 2003. Al l rights are reserved. The orig- inal manufacturer reserves the right to make improvements to the prod- ucts described in this manual at any time without notice.
iii Packing List Before you begin installing your card, please make su re that the following materials have been shipped: • 1 PCM-9387 SBC • 1 Startup manual • 1 Utility CD • 1 mini jumper pac.
PCM-9387 User’s Manual iv Additional Information and Assistance 1.V isit the Advantech web site at www .advantech.com where you can find the latest information about the prod uct. 2.Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need addi tional assistance.
v Caution! Achtung! This device complies with th e requirements in part 15 of the FCC rules: Operat ion is subject to the fol- lowing two conditions: 1.
PCM-9387 User’s Manual vi.
vii Contents Chapter 1 Introd uction ...................................................... 2 1.1 Introduction ............ ............................ ............ ........... ........ 2 1.2 Features ............. ................ ................. .
PCM-9387 User’s Manual viii 2.11.1 Main power connector, +5 V, +12 V (CN3) ................ 17 2.11.2 Fan power supply connector (C N15) ............. ......... ...... 17 2.12 Audio interfaces (CN2) ........ ............ ............................
ix 4.5 Integrated Peripherals .............. .................... ................. ... 33 4.5.1 IDE Ma ster/Slave PIO/UDMA Mode, ........... ........... .... 33 4.5.2 On-Chip Secondary PCI IDE ..... ........... .................. ...... 33 Figure 4.4:Integrated peripherals .
PCM-9387 User’s Manual x Chapter 5 PCI SVGA/LCD Setup .................................. 42 5.1 Introduction ......... ............................................................ 42 5.1.1 CMO S setting for panel type ........ ............ .........
xi B.7 Power & HDD LED Connector (CN10) ......................... 78 Table B.7:Power & HDD LED Connector (CN10) ...... 78 B.8 USB Connector (CN5) ............ ................. ................. ...... 78 Table B.8:USB Connector (CN5) .. .....
PCM-9387 User’s Manual xii.
CHAPTER 1 General Information This chapter gives b ackground infor- mation on the PCM-9387. Sections include: • Introduction • Features • Specifications • Board layout and dimensions.
PCM-9387 User’s Manual 2 Chapter 1 Introduction 1.1 Introduction The PCM-9387 is a 3.5” SBC (Singl e Board Computing) with a high per- formance and lower power based on Pentium M/ Celero n M processors. The PCM-9387, in conjun ction with Intel 852GM chipset and Intel CPU Celerom M 600MHz (with 0 L2 cache), supports three USB 2.
3 Chapter 1 1.3 Specifications 1.3.1 St andard 3.5" Biscuit SBC Functions • CPU: Embedded Intel Celeron M 600 MHz Processor • System Memory: 1x SODIMM socket, support Double Data Rate (DDR) 1.
PCM-9387 User’s Manual 4 1.3.3 Ethernet Interface • Chipset supports: 10/100Mbps - Intel 82551ER 10/100Mbps- Intel 8255 1QM (Optional) 10/100/1000Mbps - Intel 8254 1GI (Optional) • Interface: RJ45 connector • Standard IEEE 802.3 z/ab (1000BASE-T) or IEEE 802.
5 Chapter 1 1.4 Board layout: dimensions Figure 1.1: Board layout: Dimensi ons(Component Side).
PCM-9387 User’s Manual 6 Figure 1.2: Board layout: D imensions(Solder Side).
CHAPTER 2 Inst allation This chapter explains the setup proce- dures of the PCM-9387 hard ware, including instructio ns on setting jump- ers and connecti ng peripherals, switches and indicators. B e s u r e t o r e a d all safety precautions before you begin the installation procedure.
PCM-9387 User’s Manual 8 Chapter 2 Inst allation 2.1 Jumpers The PCM-9387 has a number of jumpers that allow you to configure your system to suit your application. The tabl e below lists the functions of the various jump ers. 2.1.1 Jumper Location T able 2.
9 Chapter 2 2.1.2 Jumper Settings 2.1.2.1 Audio Power S ource Select (J 1) 2.1.2.2 COM2 Auto Flow Settin g (J2) 2.1.2.3 LCD Power Setting (J6) 2.1.2.4 AT/ATX Power Setting T able 2.2: Audio Power Selector(J1 ) Description PIN HEADER 3*1P 180D (M) SQUARE 2.
PCM-9387 User’s Manual 10 2.1.2.5 PCI VIO (JP1) 2.1.2.6 Clear CMOS(S1) This jumper is used to erase CMOS data and reset system BIOS informa- tion. The procedure for clearing CMOS is: 1. T urn off the system. 2. Short pi n 2 and pin 3. 3. Return jump er to pins 1 an d 2.
11 Chapter 2 2.2 Connectors On-board connectors l ink the PCM-9387 to external dev ices such as hard disk drives, a keyboard, or floppy drives. The table below lists the func- tion of each of th e board’ s connectors.
PCM-9387 User’s Manual 12 2.3 Locating Connectors Figure 2.1: Jumpers and Connectors Drawing (component si de) J8 CN1 J6 JP1 S1 CN2 CN3 CN5 CN6 CN9 CN13 CN19 CN8 CN12 CN10 CN14 CN11 CN18 CN15 CN23 C.
13 Chapter 2 Figure 2.2: Connectors (solder side) DIMM1 CN21 S2.
PCM-9387 User’s Manual 14 2.4 Setting Jumpers Y ou may configu re your card to match the needs of your appl ication by setting jumper s. A jumper is a metal br idge used to close an electric cir- cuit. It consists of two metal pi ns and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them.
15 Chapter 2 2.5 Inst alling SO-DIMM The procedures for installing SODI MMs are described below . Please fol- low these steps carefully . Y ou can install SDRAM memory mo dules using 200-pin SODIMMs (S mall Outline Dual In -line Memory Modules). 1. Ensure that all power supplies to the system are switch ed off.
PCM-9387 User’s Manual 16 2.6.1 Connecting the hard drive Connecting drives is do ne in a daisy- chain fashion. This package includes One 44PIN IDE cable that can connect to 1.8" and 2.5" drives. 1. Connect one end of the cable to Hard Drive connector .
17 Chapter 2 2.9 Keyboard and PS/2 mouse connector (CN14) The board provides a keyboard connector that su pports both a keyboard and a PS/2 style mouse.
PCM-9387 User’s Manual 18 2.12 Audio interfaces (CN2) 2.12.1 Audio connector (CN2) The board provides all major audi o signals on a 10-pin cable connector, These audio signals includ e Microphone in (mono), Line in (stereo) and Line out (st ereo). 2.
19 Chapter 2 The board supports 2 channel 36-bi t (48-bit optional) L VDS LCD panel displays. Users can connect to either an 36-bit or 48 -bit L VDS LCD on it. 2.15 Ethernet configuration The board is equipped with a high perform ance 32-bit PCI-bus Ethernet interface which is fully compliant with IEEE 802.
PCM-9387 User’s Manual 20 2.18 GPIO (General Pu rpose Input Output) (CN7) The board supports 10-bit GPIO through GPIO connector . The 10 digit al in- and out-puts can be programmed to read or control devices, with in put or out- put defined. The default sett ing is 5 bits in put and 5 bits output.
21 Chapter 3 CHAPTER 3 Chip set Sof tware Inst allation Utility.
PCM-9387 User’s Manual 22 Chapter 3 Chip set Sof tware Inst allation Utility 3.1 Before you begin T o facilitate the installation of th e enhanced display device drivers and utility software, you shoul d read the instructions in this chapter carefully before you attempt installatio n.
23 Chapter 3 • Integrates superior video features. These include filtered sealing of 720 pixel DVD cont ent, and MPEG-2 motion co mpensation for soft- ware DVD W indows 98SE W indows 2000 W indows XP 3.3 Inst alling the CSI Utility 1. Insert the driver CD into your syst em’ s CD-ROM drive.
PCM-9387 User’s Manual 24 2. Click "Next" when you see the following message. 3. Click "Y es" when you see the following message.
25 Chapter 3 4. Click "Next" when you see the following message. 5. When the following message appear s, click "Finish" to comple te the installation an d restart W indows.
PCM-9387 User’s Manual 26.
27 Chapter 4 CHAPTER 4 A ward BIOS Setup.
PCM-9387 User’s Manual 28 Chapter 4 A ward BIOS Setup 4.1 Introduction A w ard’ s BIOS ROM has a built-in setup p rogram that allows u sers to modify the basic system configu ration. This type of inform ation is stored in battery-backed memory (CMOS RAM) so that it retains th e setup information when th e power is turned o ff.
29 Chapter 4 4.2 Entering Setup T urn on the computer and check for the “patch cod e”. If there is a number assigned to the patch code, it means that the BIO S supports your CPU. If there is no number assigned to the patch code, please contact Advan- tech’ s applications engineer to obt ain an up-to-date patch code file.
PCM-9387 User’s Manual 30 4.3 St andard CMOS Setup Choose the “Standard CMOS Features” option from the “Initial Setup Screen” menu, and the screen below will be displayed. This menu allows users to configure system components such as dat e, time, hard disk driv e, floppy drive, display , and memory .
31 Chapter 4 . 4.4.1 V irus W arning If enabled, a warning message and alarm beep activates if someone attempts to write here. The commands are “Enabled” or “Disabled.” 4.4.2 L1 & L2 Cache Enabling this feature speeds up memory access. The commands are “Enabled” or “Disabled.
PCM-9387 User’s Manual 32 4.4.6 Boot UP Floppy Seek Selection of the command “Disabled” wi ll speed the boot up. Selection of “Enabled” searches disk drives during boot up. 4.4.7 Boot Up NumLock St atus This feature selects the “power on” state for NumLock.
33 Chapter 4 This setting allows selecting an OS with greater than 64MB of RAM. Commands are “Non-OS2” or “OS2.” 4.4.14 MPS V ersion Control For OS This reports if an FDD is availabl e for W indows 95. The commands are “Y es” or “No.” 4.
PCM-9387 User’s Manual 34 4.5.3 USB Controller Select Enabled if your system contains a Universal Serial Bus (USB) con- troller and you have USB peripherals. The choices: Enabled, Disabled. 4.5.4 USB Keyboard/Mouse Support Select Enabled if user plan to use an USB keyboard.
35 Chapter 4 4.5.14 UR2 Duplex Mode This item allows you to sele ct th e IR half/full duplex funcion. The choices: Half, Full. 4.5.15 Onboard Parallel Port This field sets the address of the on-board parallel port connector . Y ou can select either 3BCH/IRQ7, 378 H/IRQ7, 278H/IRQ5 or Disabled.
PCM-9387 User’s Manual 36 4.6 Power Management Setup The power management setup controls the CPU card’ s “green” features to save power . The following screen shows the manufacturer ’ s defaults:: 4.6.1 Power-Supply T ype Choose A T or A TX power supp ly 4.
37 Chapter 4 . 4.6.4 V ideo Off In Suspend When system is in susp end, video will turn off. 4.6.5 Modem Use IRQ This determines the IRQ in which the MODE M can use.The choices: 3, 4, 5, 7, 9, 10, 1 1, NA. 4.6.6 HDD Power Down Y ou can ch oose to turn the HDD off afte r one of the time intervals listed, or when the system is in “suspend” mode.
PCM-9387 User’s Manual 38 When Enabled, your can set the date and time at which the R TC (real- time clock) alarm awakens the syst em from Suspend mode. The choices: Enabled, Disabled. 4.6.12 Primary IDE 0 (1) and Seconda ry IDE 0 (1) When Enabled, the system will resume from suspend mode if Primary IDE 0 (1) or Secondary IDE 0 (1 ) is active.
39 Chapter 4 4.7.2 Reset Configuration Dat a Default is Disable. Select Enable to reset Extended Syst em Configura- tion Data (ESCD) if you have installed a new add-on and system econfig- uration has caused such a conflict that OS cannot boot . 4.7.3 Resources controlled by: The commands here are “Auto” or “Manu al.
PCM-9387 User’s Manual 40 Remember , to enable the password setting featu re, you must first select either “Setup” or “System” from the “Advanced BIOS Features” menu. 4.9 Save & Exit Setup If you select this and press <Enter>, the values entered in the setup utili- ties will be recorded in the CMOS memory of the chipset.
CHAPTER 5 PCI SVGA/LCD Setup This chapter details the software con- figuration information . It shows you how to configure the card to match your application requirements.
PCM-9387 User’s Manual 42 Chapter 5 PCI SVGA/LCD Setup 5.1 Introduction The board has an onboard Intel 852GM chipset for its AGP/SVGA con- troller . It supports L VDS LCD displays and conventional analog CR T monitors with 64MB frame buffer sh ared with system memory .
43 Chapter 5 2. Select “1” for current display , or “2” for second display . 3. Enable “Extend my W indows desktop onto this m onitor”. 4. Click “OK”.
PCM-9387 User’s Manual 44 5.2 Connections to T wo St andard LCDs The following tables illustrate typical LC D connection pinouts for the PCM-9387. 5.2.1 LG LM 150x06 (1024x768 L VDS LCD) * LCD connect or type: HRS D F 19K-20P-1H o r compatible T able 5.
45 Chapter 5 5.2.2 AU M170EG01 (1280x1024 TFT LCD @ 48bit) T able 5.2: Connections to AU M170EG01 (CN1) AU M170EG01 PCM-9387 CN1 Pin Function Pin Func tion 1 RxOIN0- 7 L VDS_Y AM0 2 RxOIN0+ 9 L VDS_Y .
PCM-9387 User’s Manual 46 5.3 Inst allation of the SVGA Driver Complete the followin g steps to install the SVGA driver . Follow the pro- cedures in the flow char t that apply to the operating syst em that you are using within your PCM-9387. 5.3.1 Inst allation of Windows 98/2000 1.
47 Chapter 5 2. Or , find Win2000 VGA driver from CD at the directory of PCM-9387 CD-ROM, VG Awin2k_xp1332..
PCM-9387 User’s Manual 48 3. Double click "setup" and "next" into setup wizard..
49 Chapter 5 4.Restart computer when installation fin ished. 5.4 Further Information For further information about the AGP/VGA installation in yo ur PCM- 9387, includi ng driver updates, tro ubleshooti ng guides and F AQ lists, visit the following web resources: Intel websi te: www .
PCM-9387 User’s Manual 50.
CHAPTER 6 Audio Setup The PCM-9387 is equipped with an audio interface that records and plays back CD-quality a udio. This chap ter provides instructions for installin g the software drivers included on the audio driver diskettes.
PCM-9387 User’s Manual 52 Chapter 6 Audio Setup 6.1 Introduction The PCM-9387's on-board audio inte rface provides high -quality stereo sound and FM musi c synthesis (ESFM) by using the Int el ICH4 audio controller . The audio interface can reco rd, compress, and play back voice, sound, and music with built-i n mixer control.
53 Chapter 6 6.2.2 Windows 98 drivers 1. Find W in98/2000 Audio driver folder from CD at the directory of PCM-9387 CD, click "setup" to start the installatio n process.
PCM-9387 User’s Manual 54 2. Click "yes" to reboot your comput er ..
CHAPTER 7 Ethernet Interface This chapter provides i nformation on Ethernet configuratio n. Sections include: • Introduction • Installation of Ethern et drivers for W indows 98/200 0/NT • Furthe.
PCM-9387 User’s Manual 56 Chapter 7 Ethernet Interface 7.1 Introduction The PCM-9387 is equipped with a high performance 32-bit Ethernet chipset which is fully compliant wit h IEEE 802.3 100 Mbps CSMA/CD standards. It is supported by major network operating systems.
57 Chapter 7 b. Double click "Network". 2. a. Click "Add New Hardware" and prepare to install network func- tions..
PCM-9387 User’s Manual 58 3. a. Select the "Adapter" it em to add the Ethernet card. 4. a. Click "Have Disk" to install the driver .
59 Chapter 7 6. a. Choose the " Choose the "Intel(R ) GD82559ER PCI Adapter" item. b. Click "Next". 7. a. Make sure the configurations of relative items are set correctly .
PCM-9387 User’s Manual 60 7.2.2 Inst allation for Windows 2000 1. a. Select "S tart", "Settings". "Control Panel". b. Double click "Network".
61 Chapter 7 2. Click “Add new hardwa re wizard” and prepare to install network function.
PCM-9387 User’s Manual 62 3. Choose Hardware Device “Ethernet Controller”.
63 Chapter 7 4. Insert the CD into D: drive a. Fill in the Find the LAN chipset folder at the directory of PCM- 9387 win2000 folder from CD ROM dri ve b.
PCM-9387 User’s Manual 64 Click “Next” 6 a. Make sure the configurations of relative items are set correc tly.
65 Chapter 7 b. Click “OK” 7.3 Further information Intel websi te: www .intel.com Advantech websites: www .advantech.com www .advantech.com.tw.
PCM-9387 User’s Manual 66.
67 Appendix A Appendix A Programming the GPIO and W atchdog T imer The PCM-9387 is equipped with a watchdog timer that resets the CPU or generates an interrupt if processing comes to a standstill for any reason . This feature ensures sy stem reliability in industrial standalone or unman ned environments.
PCM-9387 User’s Manual 68 Appendix A Programming GPIO & W aterdog Ti mer A.1 Supported GPIO Register Bellow are detail ed description of the GPIO addresse s an d programming sample. A.1.1 GPIO Registers CRF0 (GP10-GP17 I/O selection register . Default 0xFF) When set to a '1', respective GPIO port is programmed as an input port.
69 Appendix A A.1.2 GPIO Example program-1 --------- ----------- -------- ----------- --------- Enter the extended function mode, in terruptible double-write --------- ----------- -------- -----------.
PCM-9387 User’s Manual 70 OUT DX,AL MOV DX,2FH MOV AL,??H ; Put the output value int o AL OUT DX,AL --------- ----------- -------- ----------- --- Exit extended funct ion mode | --------- ----------.
71 Appendix A A.2 W atchdog programming Bellow is a sample of program ming code for controlli ng the W atch dog T imer function. --------- ----------- -------- ----------- ---------- ----------- -----.
PCM-9387 User’s Manual 72 MOV DX,2EH MOV AL,F6H OUT DX,AL MOV DX,2FH MOV AL,05H ; Set 5 seconds OUT DX,AL ;-------- --------- ----------- ---------- ---- ; Exit extended function mode | ;-------- --.
Appendix B Pin Assignment s This appendix contains informatio n of a detailed or sp ecialized nature. It includes: • CPU Fan Power Connector • Ethernet 10 /100Base-T Conn ector • Audio Conn ecto.
PCM-9387 User’s Manual 74 Appendix B Pin Assignment s B.1 CPU Fan Powe r Connector (CN15) B.2 Audio Connector (CN2) T able B.1: IR connector (CN15) Description Wafer Box 2.0mm 3P180D w/Lock Pin Signal 1 F AN_DET 2V C C 3G N D T a ble B.2: Audio connector (CN2) Description BOX HEADER SMD 5*2 180D (M) 2.
75 Appendix B B.3 Main Power Connector (CN3) B.4 Keyboard and PS/2 Mouse Connector (CN14) T a ble B.3: Main Power Connector (CN3) Description Power CONN. 6*2 180D Pin Signal Pin Signal 1G N D 2 G N D 3 VCC 4 GND 5V C C 6 V C C S B 7 GND 8 PWR_PSON# 9V C C 1 0 G N D 1 1 VCC 1 2 +12V T a ble B.
PCM-9387 User’s Manual 76 B.5 IDE Hard Drive Connector (CN6) T able B.5: IDE HDD connector (CN6) Description BOX HEADER SMD 22*2P 180 D(M) 2.0mm IDIOT - PROOF Pin Signal Pin Signal 1 IDE RESET 2 GND.
77 Appendix B B.6 Parallel Port Connector (CN13) T a ble B.6: Parallel Port Connect or (CN13) Description BOX HEADER SMD 13*2P 180D(M) 2.0mm Pin Signal Pin Signal 1 STROBE 2 AUTOFD 3D 0 4E R R 5 D1 6 .
PCM-9387 User’s Manual 78 B.7 Power & HDD LED Connect or (CN10) B.8 USB Connector ( CN5) T a ble B.7: Power & HDD LED Connector (CN10) Description W AFER BOX 2.0mm 6P 180D MALE W/LOCK Pin Signal 1+ 5 V 2G N D 3 power LED+ (+5V) 4 power LED- (GND) 5 HDD LED + 6 HDD LED - T a ble B.
79 Appendix B B.9 LCD Inverter Backlight Connect or (CN17) T a ble B.9: LCD Inverter Backlight Conn (CN17) Description W AFER BOX 2.0mm 5P 180D MALE W/LOCK Pin Signal 1+ 1 2 V 2G N D 3 BKL TEN 4 VBR 5.
PCM-9387 User’s Manual 80 B.10 L VDS Connector (CN1) T a ble B.10: L VDS Connector (CN1) Description *CONN. DF13-40DP-1.25V Pin Signal Pin Signal 1 VDDSAFE5 2 VDDSAFE5 3 GND 4 GND 5 VDDSAFE3 6 VDDSA.
81 Appendix B B.1 1 COM2 RS232/422/ 485 series port (CN8) B.12 Comp actFlash Card Connector (CN21) T a ble B.1 1: COM2 RS-232/422/485 series po rt Description BOX HEADER SMD 7*2P 180D MALE 2.
PCM-9387 User’s Manual 82 B.13 IR connetor (CN1 1) 25 *CD2 26 -CD1 27 D1 1 28 D12 29 D13 30 D14 31 D15 32 -CS1 33 *VS1 34 -IORD 35 *IOWR 36 -WE 37 INTRQ 38 +5 V 39 *CSEL 40 -VS2 41 *RESER 42 IORDY 43 *INP ACK 4 4 -REG 45 *DASP 46 -PDIAG 47 D08 48 D09 49 D10 50 GND * low active T a ble B.
83 Appendix B B.14 MIO inte rface (CN4) T able B.14: MIO connectors Description B/B CONN. 80P SMD 0.8mm 18 0D QSE-080-01-F- D-A Pin Net Name Inter- Face Pin Net Name Inter- Face A1 USB_OC#4 USB B1 I2C.
PCM-9387 User’s Manual 84 A26 AD14 PCI B26 AD24 PCI A27 AD15 PCI B27 AD25 PCI A28 CBE#1 PCI B28 AD26 PCI A29 P AR PCI B29 AD27 PCI A30 SERR# PCI B30 AD28 PCI A31 PERR# PCI B31 AD29 PCI A32 STOP# PCI.
85 Appendix B A58 DVOBCLK# DVO B58 DVOCD1 1 DVO A59 GND GND B59 DVOCD10 DVO A60 DVOBD5 DVO B60 DVOCD9 DVO A61 DVOBD4 DVO B61 DVOCD8 DVO A62 DVOBD3 DVO B62 DVOCD7 DVO A63 DVOBD2 DVO B63 DVOCD6 DVO A64 .
PCM-9387 User’s Manual 86.
Appendix C System Assignment s This appendix contains information of a detailed nature. It includes: • System I/O ports • 1st MB memory map • DMA channel assignments • Interrupt assignments.
PCM-9387 User’s Manual 88 Appendix C System Assignment s C.1 System I/O Port s T a ble C.1: System I/O ports Addr . range (Hex) Device 000-01F DMA controller 020-021 Interrupt controller 1, master 0.
89 Chapter C C.2 1st MB memory map C.3 DMA channel assignments T a ble C.2: 1st MB memory map Addr . range (Hex) Device F0000h - FFFFFh System ROM *CC000h - EFFFFh Unused (reserved for Ethernet ROM) C.
PCM-9387 User’s Manual 90 C.4 Interrupt assignment s T able C.4: Interrupt assignments Interrupt# Interrupt source IRQ 0 Interval timer IRQ 1 Ke yboard IRQ 2 Interrup t from controller 2 (cascade) I.
91 Appendix D Appendix D A T/A TX Power setting.
PCM-9387 User’s Manual 92 Appendix D A T/A TX Power setting D.1 Introduction PCM-9387 supports 2 kinds of pow er mode to boot up system. One is A TX mode, the other is A T mode. A TX should connect standby power and power supply on# signal to turn on ma in power supply .
93 Appendix D A TX power supply diag ram AT X Power Supply +5V Pin3 PCM-9387 PCM-9387 PCM-9386 PCM-9387 Power Connector Pin5 Pin9 Pin1 1 Stan db y +5V Pin6 PSON# Pin8 +12V (Optional) Pin12 GND Pin1 Pi.
PCM-9387 User’s Manual 94 A T power suppl y diagram AT Power Supply +5V Pin3 PCM-9387 PCM-9387 PCM-9386 PCM-9387 Power Connector Pin5 Pin9 Pin1 1 Pin6 Pin8 +12V (Optional) Pin12 GND Pin1 Pin2 Pin4 P.
Appendix E Mechanical Drawings.
PCM-9387 User’s Manual 96 Appendix E Mechanical Drawings E.1 Mechanical Drawings Figure E.1: PCM-9387 M ech Drawing(Component).
97 Appendix E Figure E.2: PCM-9387 Mech Drawing (Solder Side).
PCM-9387 User’s Manual 98.
Ein wichtiger Punkt beim Kauf des Geräts Intel PCM-9387 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Intel PCM-9387 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Intel PCM-9387 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Intel PCM-9387 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Intel PCM-9387 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Intel PCM-9387 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Intel PCM-9387 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Intel PCM-9387. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Intel PCM-9387 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
