Benutzeranleitung / Produktwartung IMB200VGE des Produzenten Intel
Zur Seite of 77
IMB200 Intel ® PentiumD/Pentium4/Celeron D Industrial ATX Motherboard User ’ s Manual.
i i Disclaimers The information in th is manual has been carefully checked and is believed to be accurate. AXIOMTEK Co., Ltd . assumes no responsibility for any infringements of pa tents or other rights of third parties which may result from its use. AXIOMTEK assumes no responsibility for any in accuracies that may be contained in this document.
ii i ESD Precautions Integrated circuits on computer boards are sensitive to static electricity. To avoid damagi ng chips from electrostatic discharge, observe the following prec autions: Do not remove boards or integrate d circuits from their anti-static packaging until you are ready to install them.
i v T a b l e o f C o n t e n t s Disclaimers .................................................................... ii ESD Precautions ........................................................... iii Chapter 1 Introduction ..............................
v 4.11 Audio Jack (Line-in/Line-Out/MIC)-CN3 ................. 27 4.12 ATX12V CPU Pow er Connector: CN14 .................. 27 4.13 Serial ATA Connectors-CN28/CN29 ...................... 28 4.14 PS/2 Keyboard/Mouse connector-CN4 .................. 29 4.
v i On Board Device IRQ Routing ....................... 69 AppendixC Detailed memor y Addess Mapping ................ 70 AppendixD I/O Shie ld ........
IMB200 LGA775 ATX MB User Manual Introduction 1 Chapter 1 Introduction 1.1 General Description The IMB200 supports LGA775-pin Intel® Pentium® D (Intel Dual-Core) processor up to 3.6GHz w ith a 533/800MHz front side bus (FSB), and features an Intel® 865G + ICH*5 chipset.
IMB200 LGA775 ATX MB User Manual Introduction 2 1.2 Specifications ¾ Processor : Intel ® Pentiu m D/Pentium4/Celeron ¾ North Bridge: Intel ® 82865G ¾ South Bridge: Intel ® 82801EB(ICH5) ¾ CPU Socket: LGA775 ¾ FSB : 533/800 Mhz ¾ L2 Cache: Integrated in CPU(Depend on CPU) ¾ BIOS: Phoenix Award BIOS Rev.
IMB200 LGA775 ATX MB User Manual Introduction 3 ¾ CF Socket: Support CF Type II Socket ¾ USB Interface: 4 USB ports; USB Spec. Rev. 2.0 compliant. ¾ Hardware Monitoring: Winbond W 83627HG-AW detection of CPU temperature, Syste m temperature, Power failure and Fan s peed.
IMB200 LGA775 ATX MB User Manual Introduction 4 1.4 Board Dimensions.
IMB200 LGA775 ATX MB User Manual Jumpers and Connectors 5 Chapter 2 Jumper s and Connectors 2.1 Board Layout.
IMB200 LGA775 ATX MB User Manual 6 Jumpers and Connectors 2.2 Jumper Settings Followed as below detailed description for Jumper setting and installed the IMB200 for your application Jumper Default Set.
IMB200 LGA775 ATX MB User Manual Jumpers and Connectors 7 2.2.2 COM1 RS232/422/485 Setting s: JP4, JP5, JP6 COM1 JP4 JP5 JP6 RS-232 (Default) Short 3-5,4- 6 Short 1-2,7- 8 Short 3-5, 4-6 RS-422 Shor t 1-3,2-4 Shor t 3-4,7-8 Short 1-3, 2-4 RS-485 Shor t 1-3,2-4 Shor t 5-6,7-8 Short 1-3, 2-4 2.
IMB200 LGA775 ATX MB User Manual 8 Jumpers and Connectors 2.2.5 CF Power Setting: JP9 Options Settings 3.3V 1-2(Defau lt) 5V 2-3.
IMB200 LGA775 ATX MB User Manual Jumpers and Conne ctors 9 2.3 Connectors The following table lis ts the function of each connector on the IMB200. Connectors Label Connectors Label General Output Conn.
IMB200 LGA775 ATX MB User Manual 10 Jumpers and Conne ctors Connectors Label Connectors Label ATX Power Conne ctor CN 31 PCI Slot PCI1~ 5 LGA775 CPU Sock et U22 AGP Slot AGP 8 X1 DIO Connector CN38.
IMB200 LGA775 ATX MB User Manual Installation 11 Chapter 3 Installat ion Before installing the processor, Please pay more attention o n Intel website and obtained more information http://www.intel.com. 3.1 CPU Installation The LGA775 processor socket comes with a le ver to protect the processor.
IMB200 LGA775 ATX MB User Manual 12 Installation ..
IMB200 LGA775 ATX MB User Manual Installation 13.
IMB200 LGA775 ATX MB User Manual 14 Installation.
IMB200 LGA775 ATX MB User Manual Installation 15.
IMB200 LGA775 ATX MB User Manual 16 Installation.
IMB200 LGA775 ATX MB User Manual Installation 17.
IMB200 LGA775 ATX MB User Manual 18 Installation 3.2 Installing ATX Power Supply System power was provided for the IMB200 Industrial motherboard by CN31 3.3 Installing the Memory The IMB200 support Dual Channel DDR 266/333/400 memo ry and support the maximum memor y capacity could up to 4GB.
IMB200 LGA775 ATX MB User Manual Installation 19.
IMB200 LGA775 ATX MB User Manual 20 Hardware Description Chapter 4 Hardware Description 4.1 General Output Connector: CN37 Power LED Pins 1, 3, 5, 7 connect the system power LED indicator to its respective switch on the case. Pin 1 is +, and pin 5 is assigned as -.
IMB200 LGA775 ATX MB User Manual Hardware Desc ription 21 4.2 Enhance IDE1/IDE 2 connecotor-IDE1 and IDE2 The IMB200 provided two IDE Port and support the maximum IDE devices could up to four IDE devices.
IMB200 LGA775 ATX MB User Manual 22 Hardware Description 4.3 Display interface-CN1 The GMCH provides interfaces to a progressive scan analog monitor and DVO can dr ive a variety of DVOdevices • The GMCH has an integrated 350 MHz RAMDAC that can directly drive a progressive scan analog mo nitor up to a resolution of 2048x1536 at 75 Hz.
IMB200 LGA775 ATX MB User Manual Hardware Desc ription 23 Current 4 N/C 5 GND 6 N/C 7 GND 8 Index # 9 GND 10 Motor enab le A # 11 GND 12 Drive Select B # 13 GND 14 Drive select A # 15 GND 16 Motor ena.
IMB200 LGA775 ATX MB User Manual 24 Hardware Description 1 Strobe # 14 Auto Form Feed # 2 Data 0 15 Error # 3 Data 1 16 Initialize # 4 Data 2 17 Printer Selec t In # 5 Data 3 18 GND 6 Data 4 19 GND 7 Data 5 20 GND 8 Data 6 21 GND 9 Data 7 22 GND 10 Acknowledge # 23 GND 11 Busy 24 GND 12 Paper Empty # 25 GND 13 Printer Select 26 4.
IMB200 LGA775 ATX MB User Manual Hardware Desc ription 25 4.7 COM2/3/4 Port Connector- CN25/CN27/CN33 support RS232 4.8 USB and Gigabit LAN RJ-45 Connector- CN6.
IMB200 LGA775 ATX MB User Manual 26 Hardware Description 4.9 USB and 10/1 00Mb LAN RJ-45 Connector-CN7 4.10 USB Connector by pin header- CN30.
IMB200 LGA775 ATX MB User Manual Hardware Desc ription 27 USB GND USB P0+ USB P0- USB P1+ AGND 1 2 10 USB Power USB GND USB P1+ USB Power 4.11 Audio Jack (Line-i n/Line-Out/MIC)-CN3 4.12 ATX12V CPU Powe r Connector: CN14 This connector connected to an ATX12V power supply and used for CPU Core Voltage.
IMB200 LGA775 ATX MB User Manual 28 Hardware Description minimum recommended wattage is 250W or 300W for a fully configured system. The system may become unstable and may experience difficulty powering up if the power supply is inadequate.
IMB200 LGA775 ATX MB User Manual Hardware Desc ription 29 4.14 PS/2 Keyboard/Mouse connector-CN4 4.15 Digital I/O Connector-CN38.
IMB200 LGA775 ATX MB User Manual 30 Hardware Description 4.16 CD/In Connector-CN9.
IMB200 LGA775 ATX MB User Manual Hardware Desc ription 31 4.17 CPU/System FAN Connector- CN23/CN24.
IMB200 LGA775 ATX MB User Manual Installing VGA Driver 32 Chapter 5 Installing VGA driver 5.1 Introduction The GMCH provides interfaces to a progressive scan analog monitor. The GMCH has an integrated 350 MHz RAMDAC that can directly drive a progressive scan analog mo nitor up to a resolution of 2048x1536 at 75 Hz.
IMB200 LGA775 ATX MB User Manual Installing VGA Driver 33 To install or upgrade th e Intel 865G video driver: 1. Run SETUP.EXE from the driver directory on your drivers CD 2. Follow the onscreen directions to complete installation. 3. There may be messages about the driver not h aving a digital signature, select Yes to all these message boxes.
IMB200 LGA775 ATX MB User Manual Installing VGA Driver 34 5.4 Windows XP VGA Driver Installation To install video support If you have installed reta il Windows you need to install the video driver. The driver is contained in the IMB200DriversVGA subdirectory on the drivers CD.
IMB200 LGA775 ATX MB User Manual Installing LAN Driver 35 Chapter 6 Installing L AN Driver 6.1 Introduction The IMB200 was built-in high performance Plug and Play Ethernet interface which is fully co mpliant with the IEEE 8 02.3 standard, and consisting of the RJ-45 connector 6.
IMB200 LGA775 ATX MB User Manual Award BIOS Utility 36 Chapter 7 Award B IOS Utility Please pay more time and check all of detailed information for BIOS settings when yo u want to used the IMB200 7.
IMB200 LGA775 ATX MB User Manual Award Bios Utility 37 from various setup func tions and exit choices. The section below the s etup items of the Main Menu displa ys the control keys for this menu.
IMB200 LGA775 ATX MB User Manual Award BIOS Utility 38 7.3 Standard CMOS Setup “ Standard CMOS Setup ” allows you to record some basic hardware configurations in your computer system and set the system clock and error handling. If the motherboard is already installed in a working system, you will not need to select this option.
IMB200 LGA775 ATX MB User Manual Award Bios Utility 39 z Date The date form at is <day>, <month>, <date> , <year>. Press <F3> to show the calendar.
IMB200 LGA775 ATX MB User Manual Award BIOS Utility 40 z Drive A type/Drive B type The category i dentifies the ty pes of floppy disk drive A or drive B installed i n the computer. None No floppy drive installe d 360K, 5.2 5 in 5.25 inch PC-ty pe standa rd drive; 360Kb capacity 1.
IMB200 LGA775 ATX MB User Manual Award Bios Utility 41 7.4 Advanced BIOS Features This section allows you to con figure and improve your system and allows you to set up some sys tem features according to your preference. 7.4.1 CPU Feature Clicks the cursor to this fiel d and pr ess <Enter>.
IMB200 LGA775 ATX MB User Manual Award BIOS Utility 42 may not be identical to this one. z Delay prior to Thermal This filed is used to select the time that would force the CPU to a 50% duty cycle whe.
IMB200 LGA775 ATX MB User Manual Award Bios Utility 43 7.4.2 Hard Disk Boot Pri ority This field is used to select the boot seq uence of the hard drives. Mov e the cursor to this fi eld then press <Enter>. Use the Up or Down arrow keys to select a device then pre ss<+> to move it up or <-> to move it dow n the list.
IMB200 LGA775 ATX MB User Manual Award BIOS Utility 44 Most people enable this setting to speed up the boot process, but you should realize that you do increase the chance of the POST missing an error if you use this.
IMB200 LGA775 ATX MB User Manual Award Bios Utility 45 z Boot Up NumLock Status This option enables and disables the numberloc k function of the keypad. The default value is “On” . On Keypad functions confin e with numbers Off Keypad functions con ver t to special functions (i.
IMB200 LGA775 ATX MB User Manual Award BIOS Utility 46 7.5 Advanced Chipset Features Since the features in th is section are related to the chipset on the CPU board and are completely optimized, you are not recommended to change the de fault settings in this setup table unless you are well orie nted with the chipset features.
IMB200 LGA775 ATX MB User Manual Award Bios Utility 47 Manual If you want better perform ance for your s ystem other than the one “ by SPD “ selec t “ Manual “ then select the best option in the “ CAS Latency Time “ To “ System Memory Frequency “ field s.
IMB200 LGA775 ATX MB User Manual Award BIOS Utility 48 cache will allow access to video BIOS addressed at C0000H To be cached if the cache controller is also enabled. The larger the range of the C ache RAM, the faster the video performance. z Memory Hole At 15M-16M You can reserve this area of sys tem memory for ISA adapter ROM.
IMB200 LGA775 ATX MB User Manual Award Bios Utility 49 But if you are using multiple graphi cs ca rds, it is up to you which card you want to use as your primary display card. It is recommended th at you select the fastest graphics card as the prim ary di splay card.
IMB200 LGA775 ATX MB User Manual Award BIOS Utility 50 7.6 Integrated Peripherals This option sets your hard disk configuration, mode and port. 7.6.1 On-Chip IDE Device Move the c u rsor to t his field and press < Enter>. The foll owing screen will be appe ared.
IMB200 LGA775 ATX MB User Manual Award Bios Utility 51 z On-Chip Primary PCI IDE This option could allow you to enable or disable the primary and secondary IDE controller, select Disabled if you want to add a Different hard dr ive controller.
IMB200 LGA775 ATX MB User Manual Award BIOS Utility 52 This option could allow you to set up Master IDE inter face from PIO mode0 to PIO Mode 4 z IDE Primary Sla v e PIO This option could allow you to.
IMB200 LGA775 ATX MB User Manual Award Bios Utility 53 z USB Controller This setting could help you enabled or Disabled Onboard USB controller z USB 2.0 Controller Select enabled if your system contai ns a Universal Serial Bus V2.0 (USB2.0) controller and you have USB2.
IMB200 LGA775 ATX MB User Manual Award BIOS Utility 54 Select Di sabled could hel p to disable onbo ard Gigabit Ethernet controll er. 7.6.3 Super IO Device Move the curs or to this field and press < Enter >. The fo llowing Screen will be appea red.
IMB200 LGA775 ATX MB User Manual Award Bios Utility 55 The choice: Half, Full. z UR2 Duplex Mode Half: Data is completely transmitted be fore receiving Data Full: Transmits and re ceives data simul taneously. z Onboard Parallel Port 378/IRQ7, 3BC/IRQ7, 278/ IRQ5 Select the I/O address and IRQ for the onboard parallel port.
IMB200 LGA775 ATX MB User Manual Award BIOS Utility 56 7.6.5 Onboard UART 3/4 IRQ Use these BIOS setting could help to set up the IRQ for Onboard UART 7.6.6 Spread Spectrum Spread spectrum is a form of wireless communications in which the frequency of the trans mitted signal is deliberately varied.
IMB200 LGA775 ATX MB User Manual Award Bios Utility 57 7.7 Power M anagement Setup The Power Management Setup allows you to save energy of your system effectively. It will shut down the hard disk and turn OFF video display after a period o f inactivity.
IMB200 LGA775 ATX MB User Manual Award BIOS Utility 58 Min Saving : Minimum p ower saving time for the Suspend Mode (1 hour) and HDD Power Down (15 min.
IMB200 LGA775 ATX MB User Manual Award Bios Utility 59 z Soft-Off by PWR-BTTN Pressing the power button for more than 4 seconds forces the system to enter the Soft -Off state when the system has “hung.
IMB200 LGA775 ATX MB User Manual Award BIOS Utility 60 7.8 PNP/PCI Configuration This section describes configurin g the PCI bus system. PCI, or Personal Computer Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed the CPU itself uses when communicating with its own special components.
IMB200 LGA775 ATX MB User Manual Award Bios Utility 61 Configuration Data (ESCD) once automatically. Disabled : The BIOS will not reset the c onfiguration d ata. Resource controlled b y The Award Plug and Play BIO S has the capacity to automatically configure all of the bo ot and Plug and Play compatible devices.
IMB200 LGA775 ATX MB User Manual Award BIOS Utility 62 7.9 PC Health Status This option configures the PCI bus system. All PCI bus systems on the system use INT# , th us all installed PCI cards must be set to this value. z Current System1 Temperature.
IMB200 LGA775 ATX MB User Manual Award Bios Utility 63 z SYSTEM FAN2 Speed. Show you the current s ystem fan2 temperature z +3.3V/+5V/+12V/-12V/-5V/VBAT(V)/5VSB Show you the vo ltage of +3.
IMB200 LGA775 ATX MB User Manual Award BIOS Utility 64 7.11 Load Fail-Safe Default When you press <Enter> on this item you get a confirmation dialog box with a message similar to: Load Fail-Safe Defaults (Y/N) ? N Pressing “ Y ” loads the default values th at are factory settings for optimal performance system operations 7.
IMB200 LGA775 ATX MB User Manual Award Bios Utility 65 Set User Password: just can only e nter but do not have the right to change the op tions of the setup menus. When you select this function, the fo llowing message will appear at the center of the screen to assist you in creating a password.
IMB200 LGA775 ATX MB User Manual Award BIOS Utility 66 computer. You determine when the password is required w ithin the BIOS Features Setup Menu and its Security op tion (see Section 3). If the Security option is set to “ System ” , the password will be required both at boot and at entry to Setup.
IMB200 LGA775 ATX MB User Manual Award Bios Utility 67 Pressing <Enter> on this item asks for confirmation: Quit without saving (Y/N)? Y This allows you to exit Setu p without storing in CMOS any change. The previous selections re main in effect.
IMB200 LGA775 ATX MB User Manual 68 Watchdog Timer A p p e n d i x A Watchdog Timer Please follow the below WDT process for setup the WDT function..
IMB200 LGA775 ATX MB User Manual PCI IRQ Routing 69 A p p e n d i x B PCI IRQ Routing PICMG PCI IRQ Routing Device ID Slot Int PCI Slot 1 31 0 CDAB PCI Slot 2 30 1 EFGH PCI Slot 3 29 2 FGHE PCI Slot 4.
IMB200 LGA775 ATX MB User Manual 70 Detailed Memo ry Address Mapping AppendixC Detailed memory Addess Mapping.
IMB200 LGA775 ATX MB User Manual I/O Shield 71 AppendixD I/O Shield P/N was 728F2000100E.
Ein wichtiger Punkt beim Kauf des Geräts Intel IMB200VGE (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Intel IMB200VGE noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Intel IMB200VGE - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Intel IMB200VGE reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Intel IMB200VGE erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Intel IMB200VGE besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Intel IMB200VGE verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Intel IMB200VGE. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Intel IMB200VGE gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
