Benutzeranleitung / Produktwartung 8I945PE-FS des Produzenten Intel
Zur Seite of 37
8I945PE-FS Intel ® Pentium ® 4 LGA775 Processor Motherboard User's Manual Rev . 1001.
- 2 - FS 8I945PE-FS Motherboard Layout ATX_12V CPU_FAN LGA775 BIOS_RE BAT 82562 SATA1 ICH7 BIOS PCI1 PCI2 DDRII1 DDRII2 DDRII3 DDRII4 SATA0 SATA2 SATA3 FDD F_PANEL PCIE_16 PCIE_1 F_USB2 F_USB1 CODEC C.
- 3 - Block Diagram LGA775 Processor CPUCLK+/-(200/133MHz) BIOS 33MHz 14.318MHz DDRII 667/533/400MHz DIMM Host Interface Intel 945P MCH Dual Channel Memory MCHCLK (133/200MHz) 66MHz 48MHz PCI Bus 4 Se.
8I945PE-FS Motherboard - 4 - English CPU Supports Intel ® Pentium ® D / Pentium ® 4 LGA775 CPU Supports 1066/800/533MHz FSB L2 cache varies with CPU Chipset Northbridge: Intel ® 94.
Hardware Installation - 5 - English I/O Control IT8712 Hardware Monitor System voltage detection CPU temperature detection CPU / System fan speed detection CPU warning temperature CPU / System fan failure warning CPU smart fan control BIOS Use of licensed AWARD BIOS Form Factor Micro A TX form factor; 24.
8I945PE-FS Motherboard - 6 - English 1 - 2 Installation of the CPU and Heatsink Before installing the CPU, please comply with the following conditions: 1 . Please make sure that the motherboard supports the CPU. 2 . Please take note of the one indented corner of the CPU.
Hardware Installation - 7 - English 1-2-2 Installation of the Heatsink The heatsink may adhere to the CPU as a result of hardening of the heatsink paste.T o prevent such an occurrence, it is suggested that either thermal tape rather than heat sink paste be used for heat dissipation or using extreme care when removing the heatsink.
8I945PE-FS Motherboard - 8 - English FS The motherboard supports DDR II memory modules, whereby BIOS will automatically detect memory capacity and specifications. Memory modules are designed so that they can be inserted only in one direction. The memory capacity used can differ with each slot.
Hardware Installation - 9 - English 2 memory modules 4 memory modules DDR II 1 DDR II 2 DDR II 3 DDR II 4 DS/SS X DS/SS X X DS/SS X DS/SS DS/SS DS/SS DS/SS DS/SS Dual Channel Memory Configuration GA-8I945PE-FS supports the Dual Channel T echnology . After operating the Dual Channel T echnology , the bandwidth of Memory Bus will add double.
8I945PE-FS Motherboard - 10 - English 1 - 5 I/O Back Panel Introduction COM A (Serial Port) Connects to serial-based mouse or data processing devices. SPDIF Out The SPDIF optical output port is capable of providing digital audio to external speakers or com pressed AC3 data to an external Dolby Digital Decoder via an optical cable.
Hardware Installation - 11 - English 1 - 6 Connectors Introduction 1) A TX_12V 2) A TX (Power Connector) 3 ) CPU_FAN 4 ) SYS_FAN 5 ) FDD 6) I D E 7) SA T A0 / SA T A1 / SA T A2 / SA T A3 8 ) F_P ANEL .
8I945PE-FS Motherboard - 12 - English 1/2) A TX_12V/A TX (Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, please make sure that all components and devices are properly installed.
Hardware Installation - 13 - English 3/4) CPU_F AN / SYS_F AN (Cooler Fan Power Connector) The cooler fan power connector supplies a +12V power voltage via a 3-pin/4-pin (only for CPU_FAN) power connector and possesses a foolproof connection design. Most coolers are designed with color-coded power connector wires.
8I945PE-FS Motherboard - 14 - English 6 ) IDE (IDE Connector) An IDE device connects to the computer via an IDE connector. One IDE connector can connect to one IDE cable, and the single IDE cable can then connect to two IDE devices (hard drive or optical drive).
Hardware Installation - 15 - English 8 ) F_P ANEL (Front Panel Jumper) Please connect the power LED, reset switch and power switch etc. of your chassis front panel to the F_P ANEL connector according to the pin assignment below .
8I945PE-FS Motherboard - 16 - English 1 0 ) AUX_IN (AUX In Connector) Connect other device (such as PCI TV Tuner audio out) to the connector. Pin No. Definition 1 MIC2_L 2 GND 3 MIC2_R 4 -ACZ_DET 5 Line2_R 6 FSENSE1 7 FAUOIO_JD 8 No Pin 9 LINE2_L 1 0 FSENSE2 Pin No.
Hardware Installation - 17 - English 1 1 ) F_ USB1 / F_USB2 (Front USB Connector) Be careful with the polarity of the front USB connector. Check the pin assignment carefully while you connect the front USB cable, incorrect connection between the cable and connector will make the device unable to work or even damage it.
8I945PE-FS Motherboard - 18 - English 1 3 ) BIOS_RE (BIOS Recovery) If the BIOS file on the motherboard is damaged, set this jumper to Recovery mode. Insert the floppy disk containing the complete BIOS file and then restart the system. System will write the BIOS file to the BIOS ROM automatically at startup.
Hardware Installation - 19 - English 1 5 ) BA T(Battery) FS Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions.
8I945PE-FS Motherboard - 20 - English.
BIOS Setup - 21 - English BIOS (Basic Input and Output System) includes a CMOS SETUP utility which allows user to configure required settings or to activate certain system features. The CMOS SETUP saves the configuration in the CMOS SRAM of the motherboard.
GA-8I945PE-FS Motherboard - 22 - English The Main Menu (BIOS V er . 10d) Once you enter Award BIOS CMOS Setup Utility , the Main Menu (as figure below) will appear on the screen. Use arrow keys to select among the items and press <Enter> to accept or enter the sub-menu.
BIOS Setup - 23 - English Set Supervisor Password Change, set, or disable password. It allows you to limit access to the system and Setup, or just to Setup. Set User Password Change, set, or disable password. It allows you to limit access to the system.
GA-8I945PE-FS Motherboard - 24 - English 2 - 1 Standard CMOS Features Date The date format is <week>, <month>, <day>, <year>. Week The week, from Sun to Sat, determined by the BIOS and is display only Month The month, Jan. Through Dec.
BIOS Setup - 25 - English Capacity Capacity of currently installed hard disk. Hard drive information should be labeled on the outside drive casing. Enter the appropriate option based on this information.
GA-8I945PE-FS Motherboard - 2 6 - English 2 - 2 Advanced BIOS Features Hard Disk Boot Priority Select boot sequence for onboard(or add-on cards) SCSI, RAID, etc. Use < > or < > to select a device, then press<+> to move it up, or <-> to move it down the list.
BIOS Setup - 27 - English Boot Up Floppy Seek During POST , BIOS will determine if the installed floppy disk drive is 40 or 80 tracks. 360K type is 40 tracks 720K, 1.2M and 1.44M are all 80 tracks. Disabled BIOS will not search for the type of floppy disk drive by track number.
GA-8I945PE-FS Motherboard - 2 8 - English 2 - 3 Integrated Peripherals On-Chip Primary PCI IDE Enabled Ena ble on board 1 st cha nnel I DE por t. (De fault value) Disabled Disable onboard 1st channel IDE port. On-Chip SA T A Mode Disabled Disable this function.
BIOS Setup - 29 - English USB Controller Enabled Enable USB Controller. (Default value) Disabled Disable USB Controller. USB 2.0 Controller Disable this function if you are not using onboard USB 2.0 feature. Enabled Enable USB 2.0 Controller. (Default value) Disabled Disable USB 2.
GA-8I945PE-FS Motherboard - 3 0 - English Onboard FDC Controller Enabled Enable onboard FDC controller. (Default value) Disabled Disable onboard FDC controller. Onboard Serial Port 1 3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default value) 2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8.
BIOS Setup - 31 - English 2 - 4 Power Management Setup ACPI Suspend T ype S1(POS) Set ACPI suspend type to S1/POS(Power On Suspend). S3(STR) Set ACPI suspend type to S3/STR(Suspend T o RAM). (Default value) USB Device Wake-Up From S3 Disabled Disable USB Device Wake-Up from S3.
GA-8I945PE-FS Motherboard - 3 2 - English 2 - 5 PnP/PCI Configurations Resources Controlled By Manual User can set the PnP resource (I/O Address, IRQ & DMA channels) used by legacy ISA DEVICE. Auto BIOS automatically use these PnP rescuers. (Default value) IRQ assigned ( 3,4,5,7,9,10,1 1,12,14,15 ) PCI Device This IRQ assigns for PCI device.
BIOS Setup - 33 - English 2 - 6 PC Health Status Current V oltage(V) Vcore / VCC18 / +3.3V / +12V Detect system's voltage status automatically . Current CPU T emperature Detect CPU temperature automatically . Current CPU/SYSTEM F AN Speed (RPM) Detect CPU/SYSTEM Fan speed status automatically .
GA-8I945PE-FS Motherboard - 3 4 - English 2 - 7 Frequency Control System Memory Multiplier Wrong frequency may make system can't boot, clear CMOS to overcome wrong frequency issue. for FSB(Front Side Bus) frequency=533MHz, 3 Memory Frequency = Host clock X 3.
BIOS Setup - 35 - English 2 - 8 Load Fail-Safe Defaults Fail-Safe defaults contain the most appropriate values of the system parameters that allow minimum system performance. 2 - 9 Load Optimized Defaults Selecting this field loads the factory defaults for BIOS and Chipset Features which the system automati- cally detects.
GA-8I945PE-FS Motherboard - 3 6 - English 2-10 S e t S u pervisor/User Password Selecting this field loads the factory defaults for BIOS and Chipset Features which the system automati- cally detects. When you select this function, the following message will appear at the center of the screen to assist you in creating a password.
BIOS Setup - 37 - English 2 - 1 1 Save & Exit Setup Type "Y" will quit the Setup Utility and save the user setup value to RTC CMOS. T ype "N" will return to Setup Utility . 2-12 Exit Without Saving Type "Y" will quit the Setup Utility without saving to RTC CMOS.
Ein wichtiger Punkt beim Kauf des Geräts Intel 8I945PE-FS (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Intel 8I945PE-FS noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Intel 8I945PE-FS - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Intel 8I945PE-FS reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Intel 8I945PE-FS erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Intel 8I945PE-FS besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Intel 8I945PE-FS verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Intel 8I945PE-FS. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Intel 8I945PE-FS gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
