Benutzeranleitung / Produktwartung 87C196CA des Produzenten Intel
Zur Seite of 136
8XC196L x Supplement to 8XC196K x , 8XC196J x , 87C196CA User ’ s Manual August 2004 Order Numbe r: 272973-003.
Information in this document is pr ovided in connection with Intel products. No licen se, express or imp lied, by estoppel or ot herwise, to a ny intellectual prope rty rights is granted by this document.
iii CONTENTS CHAPTER 1 GUIDE TO THIS M ANUAL 1.1 MANUAL CONTENTS ................ ............................ ............................ ........................... 1-1 1.2 RELATED DOCUMENTS ........... ................. ................ ..........
8XC196 L X SUPPLEMENT iv CHAPTER 6 SYNCHRONOUS SERIAL I/O PORT 6.1 SSIO 0 CLOC K REGISTER............. ................. ............................ ............................ ..... 6-1 6.2 SSIO 1 CLOC K REGISTER............. ................. ....
v CONTENTS 8.6 PROGRAMM ING THE J1850 CONTRO LLER ............ ............................ .................... 8-16 8.6.1 Programming the J1850 Co mmand (J_CMD) Registe r .......... ................. ...............8-16 8.6.2 Programming the J1850 Co nfiguration (J_CFG) Reg ister .
8XC196 L X SUPPLEMENT vi FIGURES Figure Page 2-1 8XC 196L x Block Diagram ........ ................. ................ ................. ................. .................2-2 2-2 Clock Ci rcuitry (87C196 LA, LB Only) ............. ................. ..
vii CONTENTS FIGURES Figure Page 11-1 Slave Program ming Circui t ............ ............................ ............................ .....................11-3 11-2 Serial Port Programming C ircu it ..................... ................. .........
8XC196 L X SUPPLEMENT viii TA B L E S Ta b l e Page 1-1 Related Do cuments .................. ................. ................ ................. ................. .................1-2 2-1 Featu res of the 8XC196L x and 8X C196K x Product Famiies ...
1 Guide to This Manual.
.
1-1 CHAPTER 1 GUIDE TO TH IS MANUAL This docume nt is a supp lement to the 8XC196Kx, 8 XC196Jx, 8 7C196CA Micr ocont r oller Family User ’ s Manua l . It describes the dif ferences between the 8XC196L x and t he 8XC196 K x fami ly of microcontrollers.
8XC196 L X SUPPLEMENT 1-2 Appendix A — Sign al Descript ions — pro vides reference inf o rmation for the 8 XC196L x de- vice pins, includ ing descri ption s of the pin functi ons, reset stat us of the I/O and contr ol pins, and package pin assignments.
2 Ar chitectural Overview.
.
2-1 CHAPTER 2 ARCHITECTURAL OVERVIEW This chapter describes architectural dif ferences between the 8XC196L x (8 7C196LA, 87C1 96LB, and 83C196 LD) and the 8XC196K x ( 8XC196K x , 8XC196J x , and 87 C196CA) microcon troller famili es.
8XC196 L X SUPPLEMENT 2-2 2.2 BLOCK DIAGRAM Figure 2-1 is a simplified block di agram that shows the major blo cks within the microcontro ller . Observe that the slave port peripheral does not exist o n the 8XC196L x . Figure 2-1. 8XC1 96L x Block Diagram 2.
2-3 ARCHITECTURAL OVERVIEW Figure 2-2. Clock Circuitry (87C196LA, L B Only) The rising edges of PH1 and PH2 generate the in ternal CLKOUT signal (Figure 2-3). The clock circuitry ro utes s eparat e internal cl ock sign als to the CPU an d the peri pherals to provi de flexi bil- ity in power man agement.
8XC196 L X SUPPLEMENT 2-4 Figure 2-3. Internal C lock Phas es (Assumes PLL is Byp assed) The combined pe riod of phase 1 and ph ase 2 of the internal CLKOUT signal defines the basic time unit known as a state time or state . T able 2-2 lists state time durations at various frequencies.
2-5 ARCHITECTURAL OVERVIEW Figure 2-4 . Effect of Clock Mo de on Internal CLKOUT Frequency 2.4 EXTERNAL TIMING Y ou can con trol the outpu t frequen cy on the CLKOUT pin by programming two uneraseable PROM bits. Figure 2-5 illustrates the read-only USFR1, which reflects the state of the unerasable PROM bits.
8XC196 L X SUPPLEMENT 2-6 T o program these bits, write the correct value to the locations sho wn in T able 2-4 using slave pr o- gramming mode. During no rmal operation , you can determ ine the values of these bits by read ing the UPR OM SFR (Fi gure 2-5).
2-7 ARCHITECTURAL OVERVIEW 2.5.1 I/O P orts The I/O por ts of the 8XC196 L x are functionall y identical to those of the 8XC196J x . However , o n the 87C 196LA and LB th e reset st ate level of all 41 gener al-purpos e I/O pins h as changed fr om a weak logic “1” (wk 1) to a weak logic “0” (wk0).
.
3 Addr ess Space.
.
3-1 CHAPTER 3 ADDRESS SPACE This chapter describes the dif ferences in the address space of the 8XC196 L x from that of t he 8XC1 96K x . 3.1 ADDRESS PARTITIONS T able 3-1 is an address map of the 8XC196L x and 8X C1 96K x microcontr oller family members.
8XC196 L X SUPPLEMENT 3-2 3.2 REGISTER FILE Figure 3-1 compares the register file addresses of the 8XC196L x an d 8XC1 96K x . The register file i n Figu re 3-1 is divi ded int o an upper register f ile and a lower regi ster fi le. The u pper reg ister file co nsists of gen eral-purpose regi ster RAM.
3-3 ADDRESS SPACE Figure 3-1. Register File Address M ap T able 3-2 . Register File Memory Addres ses Device and Hex Address Range Description Addr essing Modes JV CA,JT ,KT LA, LB JR, KR LD 1DFF 1C00.
8XC196 L X SUPPLEMENT 3-4 3.3 PERIPHERAL SPECIAL-FUNCTION REGISTERS T able 3-3 li sts the pe ripheral SFR address es. Hi ghlig hted addr esses are un ique to th e 8XC19 6L x .
3-5 ADDRESS SPACE SIO and SSIO SFRs EP A SFRs (C ontinued) Address High (Odd) Byte Low (Even) Byte Address High (Odd) Byte L ow (Even) Byte 1FBEH Re served Reserved † 1F7EH EP A7_TIME (H) EP A7_TIME.
8XC196 L X SUPPLEMENT 3-6 3.4 WINDOWING W indowing maps a segment of high er memory (the u pper regist er file or periph eral SFRs) int o the lower r egister fi le. The window se lection register (WSR) selects a 32-, 64- or 128-byte seg- ment of higher memory to be windowed into the top of th e lower register file space.
3-7 ADDRESS SPACE Register RAM (87C196JV Only; Continued) 1CE0H 67H 33H 19H 1CC0H 66H 1CA0H 65H 32H 1C80H 64H 1C60H 63H 31H 18H 1C40H 62H 1C20H 61H 30H 1C00H 60H Upper Register File (CA, JT , JV , KT).
8XC196 L X SUPPLEMENT 3-8 Upper Register File (CA, JR, JT , JV , KR, KT , LA, LB, LD) 0160H 4BH 25H 12H 0140H 4AH 0120H 49H 24H 0100H 48H T able 3-4. Windows (Continue d) Base Address WSR V alue for 3.
4 Standard and P TS Interrupts.
.
4-1 CHAPTER 4 STANDARD AND PTS IN TERRUPTS The interru pt structure of th e 8XC196L x is the same as that of the 8XC196J x . The o nly difference is that t he slave port in terrupts (INT08:06) now suppor t the J1850 co ntroller peripheral.
8XC196 L X SUPPLEMENT 4-2 4.2 INTERRUPT R EGISTERS This sectio n describ es the chan ges in the inter rupt regi ster bit def initions for the 8XC1 96L x fam- ily .
4-3 STANDARD AND PTS INTERRUPTS 4.2.1 Interrupt Mask Registers Figures 4-1 and 4-2 illu strate the i nterrupt mas k registers for the 8XC196L x microcont rollers. INT_MASK Address: Reset State: 0008H 00H The interrupt mask (INT_MA SK ) register enables or disables (masks) individual interrupt requests.
8XC196 L X SUPPLEMENT 4-4 4.2.2 Interrupt Pending Registers Figures 4-3 and 4 -4 illustrate the interrupt pe nding registers for the 8XC1 96L x micro controllers. INT_MASK1 Address: Reset State : 0013H 00H The interrupt mask 1 (INT_MASK 1) register enables or disables (mask s) individual interrupt requests.
4-5 STANDARD AND PTS INTERRUPTS INT_PEND Address: Reset State: 0009H 00H When hardware detects an interrupt request, it sets the corresponding bit in the interrupt pending (INT_PEND or INT_PEND1) registers. When the vector is taken, the hardware clears the pending bit.
8XC196 L X SUPPLEMENT 4-6 4.2.3 Peripher al T ransaction Se rver Register s Figures 4-5 and 4 -6 illustrate the P TS interrupt sel ect and service reg isters for the 8XC 196L x mi- crocont rollers.
4-7 STANDARD AND PTS INTERRUPTS PTSSEL Address: Reset State: 0004H 0000H The PTS select (PTSSEL) register selects either a P TS microcode routine or a standard interrupt service routine for each interrupt request. Setting a bit selects a PTS micro code routine; clearing a bit selects a standard interrupt service routine.
8XC196 L X SUPPLEMENT 4-8 PTSSRV Address: Reset State: 0006H 0000H The PTS service (PTSSR V) register is used by the hardware to indicate that the final P T S interrupt has been serviced by the P TS routine. When PTSCOUNT reaches z ero, hardware clears the corresponding PTSSEL bit and sets the PTSSRV bit, which requests the end- of-PT S interrupt.
5 I/O Ports.
.
5-1 CHAPTER 5 I/O PORTS The I/O por ts of the 8XC196 L x are functionall y identical to those of the 8XC196J x . However , o n the 87C19 6 LA and LB, the r eset state l evel of all 41 gen eral-purpose I/O pins has changed from a weak logic “1” (wk1) to a weak logic “0” (wk0) .
8XC196 L X SUPPLEMENT 5-2 input sign als s et SFD IR. Even if a pi n is to be u sed in sp ecial-func tion mo de, you must s till in i- tialize the pin as an inpu t or output by writing to th e port direction reg ister. Resistor R1 provides ESD pro tection for the pin.
5-3 I/O PORTS Figure 5-1. Ports 1, 2, 5, and 6 In ternal Structure (87 C196LA, LB Only) 5.2.1 Configuring Ports 1, 2, 5, and 6 (Bidirect ional Ports) Using the port mo de register , you can indivi dua.
8XC196 L X SUPPLEMENT 5-4 impedance input, or open -drain outpu t. The port direction and data output reg isters select th e con- figuration for each pin. Complementary output means that the m icrocontroller driv es the signal high or lo w . High-impedance input means that the microcontr oller floats the signal.
5-5 I/O PORTS in using this pi n. Be certain that your system meets the V IH specificati ons during reset t o prevent inadvertent en try into ONCE mode or a test mode. 3. Following reset, P2.7/CLKOUT carries the strongly drive n CLKOUT signal. It is not held low .
8XC196 L X SUPPLEMENT 5-6 Figure 5-2. Ports 3 and 4 Inte rnal Structure (87C196LA, LB Only ) Q2 Q1 P x _REG P34_DRV Sample Latch PH1 Clock Internal Bus Address/Data P x _PIN D Q Weak Pullup RESET# Q3 .
6 Synchr onous Serial I/O Port.
.
6-1 CHAPTER 6 SYNCHRONOUS SERIAL I/O PORT The synchronou s serial I/O (SSIO) port on the 8XC1 96L x has been enhance d, implementing two new special function reg isters (SSIO0_CLK and SSIO1_CLK) that allow you to select the oper- ating mode and configure the phase and polarity of the serial clock s ignals.
8XC196 L X SUPPLEMENT 6-2 For transmissio ns, SSIO0_CLK det ermines whether the SSIO s hifts out data bi ts on rising or fall- ing clo ck edges. For rec eptions, SSIO0_CLK determin es whether the SSIO samples data bits on rising or fallin g clock edges.
6-3 SYNCHRONOUS SERIAL I/O PORT For transmissio ns, SSIO1_CLK det ermines whether the SSIO s hifts out data bi ts on rising or fall- ing clo ck edges. For rec eptions, SSIO1_CLK determin es whether the SSIO samples data bits on the risin g or falling clock ed ges.
.
7 Event Pr ocessor Array.
.
7-1 CHAPTER 7 EVENT PROCESSOR ARRAY The EP A on the 8XC196L x is functionally identical to th at of the 8XC1 96J x ; however, the 8XC1 96L x has only t wo captur e/compare chan nels without pin s instead of four . In additi on, the 83C196LD has no compare-only channels.
8XC196 L X SUPPLEMENT 7-2 Figure 7-1. EP A Block Diagram (87C196LA, LB Only) Indirect Interrupt Processor Logic EPA x Interrupt A5269-01 Timer-Counter Unit EPA9 / COMP1 EPA8 / COMP0 EPA 3:0 EPA 3:0 In.
7-3 EVENT PROCESSOR ARRAY Figure 7-2. EP A Block Diagram (83C196LD Only) Indirect Interrupt Processor Logic EPA x Interrupt A5281-01 TIMER1 TIMER2 Timer-Counter Unit Capture/Compare Channel 9 Capture/.
8XC196 L X SUPPLEMENT 7-4 7.1.1 EP A Mask R egisters Figures 7-3 and 7 -4 illustrate the EP A m ask registers, EP A_MASK and EP A_MASK1, for th e 8XC1 96L x microcontroller family .
7-5 EVENT PROCESSOR ARRAY 7.1.2 EP A Pending Registers Figures 7-5 and 7 -6 illust rate the EP A pend ing registers, EP A_ PEND and EP A_PEND1, for the 8XC1 96L x microcontroller family .
8XC196 L X SUPPLEMENT 7-6 7.1.3 EP A Interrupt Pri ority V ector Register Figure 7-7 illust rates the EP A interrupt priority vector (EP A IPV) register for the 8XC 196L x mi- crocont roller f amily .
8 J1850 Communications Contr oller.
.
8-1 CHAPTER 8 J1850 COMMUNICATIONS C ONTROLLER The J1850 communi cations controller manages communications between multip le network nodes. Thi s integrat ed peripher al supports the 10.4 Kb/s VPW (varia ble pulse wid th) medium- speed class B in-vehi cle network protocol.
8XC196 L X SUPPLEMENT 8-2 The J185 0 controll er can handle net work pr otocol fun ctions includ ing message frame s equenc- ing, bit arbitr atio n, in- frame re sponse (I FR) mes saging, er ror detecti on, and dela y comp ensatio n.
8-3 J1850 COMMUNICATIONS CONTROLLER 8.2 J1850 CONTROLLER SI GNALS AND REGI STERS T able 8-1 des cribes the J1 850 con troller ’ s pins , and T able 8-2 de scri bes the contr ol and st atus regi ster s.
8XC196 L X SUPPLEMENT 8-4 8.3 J1850 CONTROLLER OPE RATION This section describes the control state machine (which contains the cyclic redundancy check generator) and the sy mbol s ynchronizatio n and timin g circuitry for J185 0 transmissio ns and re- ceptions.
8-5 J1850 COMMUNICATIONS CONTROLLER 8.3.1.2 Bus Contention Bus contention arises when multiple nodes attempt to access and transmit message frames across the J1850 bus simultaneously . This creates a conflict on the bus. The r ecognition of conflicting symbols or bi t s on t h e bus i s ref erred to as con tention detection .
8XC196 L X SUPPLEMENT 8-6 8.3. 2.1 Cloc k Pr escal er Because the 87C196LB microco ntroller can operate at a variety of input freq uencies (F XT AL 1 ), the clock prescaler circ uitry is used to provide a single, intern al clock frequency ( f/2) to ensure that the J1850 perip heral is clocked at the proper o perating frequency .
8-7 J1850 COMMUNICATIONS CONTROLLER Figure 8-3. H untz icker Symbol Definiti on for J1850 A symbol is defined as a timing -level formatted bit. The VP W symbol timing requirements stip- ulate that there is one symbol per transition an d one transition per symbol.
8XC196 L X SUPPLEMENT 8-8 of arbitration, nodes A, C, and D are all transmitting an “active 0” symbol, thus the id le state of the “passive 1” symbol is over ruled in favor of th e driven state of the “active 0” symbo l.
8-9 J1850 COMMUNICATIONS CONTROLLER Figure 8-6. J1850 Message Frames A standard message frame is in itiated by th e responder and contain s no more than 1 1 data bytes to be trans mitted. An IFR m e ssag e is a request initi atin g the recipient(s) to res pond by transmit- ting data within the same frame.
8XC196 L X SUPPLEMENT 8-10 (J_CFG.7) and considers whethe r the IFR message response has a CRC byte appended. Figure 8-7 dep icts the SAE preferred, active-level state bit format timing for the NB. Figure 8-7. Huntzick er Symbol Defin ition for the Normaliz ation Bit 8.
8-1 1 J1850 COMMUNICATIONS CONTROLLER Figure 8-8. De finition for Start an d End of Frame Symbols T able 8-4 details the symbol timing characteri stics support ed by the 87 C196LB.
8XC196 L X SUPPLEMENT 8-12 8.4.2 In-frame R esponse Messaging There are three types of in-frame respon se (IFR) message framings : type 1 (a single byte fr om a single responder), type 2 (a single byte from multiple respo nders), and type 3 (multiple bytes from a single respon der).
8-1 3 J1850 COMMUNICATIONS CONTROLLER Figure 8- 10. IFR T ype 2 Messa ge Frame 8.4.2.3 IFR Messa ging T ype 3: Multiple Bytes, Single Respo nder IFR messag ing ty pe 3 (Figu re 8-1 1) is ideal fo r request ing la rge amo unts of i nformation fro m a single source i n your sys tem.
8XC196 L X SUPPLEMENT 8-14 T ransmitting the message requires that you first program the J1850 command (J_CMD) register to specify the number of byt es you want to tra nsfer across th e J1850 bus. The numb er of bytes specified must include the header byte(s).
8-1 5 J1850 COMMUNICATIONS CONTROLLER NOTE An overrun conditio n can occur on transmissi on if the transmit buffer , JTX_BUF , is overwritten. 8.5.2 Rece iving Messages For a message r eception, after.
8XC196 L X SUPPLEMENT 8-16 If a third byte is received before J_RX is read, a J1850ST core interrupt is generated and the OVR_UNDR (J_ST A T .3) bit records a receiver over run error in the J_ST A T register . 8.5.3 IFR Messa ges In-frame response (IFR) messaging is identical in setup to standard messagin g for both transmis- sion and reception.
8-1 7 J1850 COMMUNICATIONS CONTROLLER J_CMD Address: Reset State: 1F51H 00H The J1850 command (J_CMD) register determines the messaging type, specifies the number of bytes to be transmitted in the next m essage frame, and updates the status of the message transmission in progress.
8XC196 L X SUPPLEMENT 8-18 8.6.2 Programming the J185 0 Configuration (J_CFG) Register The J1850 configur ation register (Figure 8-17) selects the prop er oscillator prescal er , in itiates a transm ission b reak for deb ugging, invokes cl ock quadrup ling operati on, and se lects the no rmal- ization bit format.
8-1 9 J1850 COMMUNICATIONS CONTROLLER 8.6.3 Programming th e J1850 Delay C ompensation (J_DL Y) Re gister The J1850 d elay comp ensation r egister (Figur e 8-18) allows you to program the n ecessary d.
8XC196 L X SUPPLEMENT 8-20 J_DL Y Address: Reset State: 1F58H 00H The J1850 delay (J_DL Y ) register allows you compensate for the inherent propagation delays and to accurately resolve bus contention during arbitration. Thi s byte register can be directly addressed through windowing .
8-2 1 J1850 COMMUNICATIONS CONTROLLER 8.6.4 Programming th e J1850 Status (J_S T A T) Register The J1850 status register (Figure 8-19) prov ides the current status o f the message an d the fo ur interrupt sources associated with the J18 50 protocol.
8XC196 L X SUPPLEMENT 8-22 2 MSG_TX Message T ransmit Interrupt This bit signals the successful transmission of a mess age upon detecting the EOD symbol. 0 = no action 1 = mess age transmitted 1 MSG_RX Mess age Receive Interrupt This bit signals the successful reception of a message upon detecting the EOD symbo l.
9 Minimum Hardwar e Considerations.
.
9-1 CHAPTER 9 MINIMUM HARDWARE CONSIDERA TIONS This chapter discusses the major hardware con sideration differences between the 8XC196L x and the 8XC196 K x . The 8XC196L x has implemented a reset sou rce SFR that reveals the source of the most recent reset requ est.
8XC196 L X SUPPLEMENT 9-2 9.2 DESIGN CONSIDE RATIONS FOR 8XC196 LA, LB, AND LD W ith the excepti on of a few new multip lexe d functio ns, the 8XC1 96L x microcontrolle rs are pin compatible wi th the 8XC1 96J x microc ontr ollers . The 8X C196J x microcontr ollers are 52-lead versio ns of 8XC196K x m icrocontrollers.
10 Special Operating Modes.
.
10- 1 CHAPTER 10 SPECIAL OPERATING MODES The 8XC196 Lx’ s idl e and powerd own modes are t he same as t hose of the 8XC196 Kx. However , the clock circu itry has changed, and the on -circuit emulation (ONCE) special-pu rpose mode o p- eration has chang ed slightly because of the new reset state pin levels that have been implemented.
8XC196 L X SUPPLEMENT 10-2 Figure 10-1. Clock Circuitry (8 7C196LA, LB Only) 10.2 ENTERING AND EX ITING ONCE MODE ONCE mode isolates the device from other compone nts in the system to allow printed- circuit- board test ing or deb ugging with a clip-o n emulator .
10- 3 SPECIAL OPERATING MODES an out put. If you choose t o conf igure this pin as an input, al way s hold i t low d u rin g r e set an d en- sure that your sy stem meets the V IH specification to prevent inadvertent entry into ONCE mode.
.
11 Pr ogramming the Nonvolatile Memory.
.
11- 1 CHAPTER 1 1 PROGRAMMING THE NONVOLATILE MEMORY The 87C1 96LA and LB mi crocontr ollers con tain 24 Kbytes (2000–7 FFFH) of one-tim e-pro- grammable read-only memo ry (OTPROM). OTPROM is similar to EPROM, but it comes in a windowless package and cannot be erased.
8XC196 L X SUPPLEMENT 11-2 1 1.3 SLAV E PROGRAMMING CIR CUIT AND ADDRESS MAP Figure 1 1-1 shows the cir cuit diagr am and T able 1 1-3 details the address map for slave pr ogr am- ming of the 87C1 96LA a n d LB dev ices.
11- 3 PROGRAMMING THE NONVOLATILE MEMORY Figure 1 1- 1. Slave Progra mming Circuit T able 1 1-3. Slave Programming M ode Address Map Description Address Comments OTPROM 2000–7FFFH OTPR OM Cells OFD .
8XC196 L X SUPPLEMENT 11-4 1 1.4 SE RIAL PORT PROGRAM MING CIRCUIT AND ADDRES S MAP Figure 1 1-2 sh ows the circuit and T able 1 1-4 details the addres s map for serial port prog ramming. Figure 1 1 -2. Serial Port Programming Circuit 5 9 4 8 3 7 2 6 1 1.
11- 5 PROGRAMMING THE NONVOLATILE MEMORY T able 1 1-4. Serial Port Programm ing Mode Add ress Map Description Address Range Normal Operation Serial Port Programming Mode Internal OTPROM 2000–7FFFH A.
.
A Signal Descriptions.
.
A-1 APPENDIX A SIGNAL DESCRIPTIONS This appendix pr ovides reference inform ation for the pin functions of th e 8XC196L x microcon- trollers. A.1 FUNCTIONAL GROUP INGS OF SIGNALS T ables A-1, A-2, and A-3 list the signal assignments for the 8XC196L x microcontroller s, grouped by function.
8XC196 L X SUPPLEMENT A-2 T able A-1. 87C196LA Signa ls Arranged by F unctional Cate gories Addr & Data Input/Output (Cont’d) Program Control Processor Control Name Pin Name Pin Name Pin Name Pin AD0 22 P2.1 / RXD 28 AINC# 30 EA # 24 AD1 21 P2.2 29 CPVER 31 EXTINT 29 AD2 20 P2.
A-3 SIGNAL DESCRIPTIONS Figure A-1. 87C1 96LA 52-pin PL CC Package P6.1 / EPA9 / COMP1 P6.0 / EPA8 / COMP0 P1.0 / EPA0 / T2CLK P1.1 / EPA1 P1.2 / EPA2 / T2DIR P1.3 / EPA3 V REF ANGND P0.7 / ACH7 / PMODE.3 P0.6 / ACH6 / PMODE.2 P0.5 / ACH5 / PMODE.1 P0.
8XC196 L X SUPPLEMENT A-4 T able A-2. 87C196LB Signa ls Arranged by F unctional Cate gories Addr & Data Input/Output (Cont’d) Program Control Processor Control Name Pin Name Pin Name Pin Name Pin AD0 22 P2.1 / RXD 28 AINC# 30 EA # 24 AD1 21 P2.2 29 CPVER 31 EXTINT 29 AD2 20 P2.
A-5 SIGNAL DESCRIPTIONS Figure A-2. 87C1 96LB 52-pin PL CC Package P6.1 / EPA9 / COMP1 P6.0 / EPA8 / COMP0 P1.0 / EPA0 / T2CLK P1.1 / EPA1 P1.2 / EPA2 / T2DIR P1.3 / EPA3 V REF ANGND P0.7 / ACH7 / PMODE.3 P0.6 / ACH6 / PMODE.2 P0.5 / ACH5 / PMODE.1 P0.
8XC196 L X SUPPLEMENT A-6 T able A-3. 83C196LD Signals Arrange d by Functional Categories Addr & Data Input/Ou tput Input/ Output (Cont’d) Processor Control Name Pin Name Pin Name Pin Name Pin AD0 22 P1.0/EP A0/T2CLK 44 P4.7 7 CLKOUT 32 AD1 21 P1.
A-7 SIGNAL DESCRIPTIONS Figure A-3. 83C1 96LD 52-pin PL CC Package A.2 DEFAULT CON DITIONS T a ble A-5 lists the values of the s ignals f or the 8 7C196LA an d 87C196LB during various o per- ati ng con ditions. T able A-6 lists the same informati on for the 83 C196LD.
8XC196 L X SUPPLEMENT A-8 T able A-5. 87C196LA, LB Defa ult Signal Conditions Port Signals Alternate Function s During RESET# Active Upon RESE T# Inactive (Note 6) Id le P ower- down P0.7:2 ACH7:2 HiZ HiZ HiZ H iZ P1.0 EP A0/T2C LK WK0 WK0 (Note 1) (Note 1) P1.
A-9 SIGNAL DESCRIPTIONS T able A-6. 83C196LD Defa ult Signal Conditi ons Port Signals Alternate Function s During RESET# Active Upon RESE T# Inactive (Note 6) Id le P ower- down P0.7 :2 — HiZ HiZ HiZ HiZ P1.0 EP A0/T2C LK WK1 WK1 (Note 1) (Note 1) P1.
.
Glossary.
.
Glossary-1 GLOSSARY This gl os sary def i nes acronyms, abbreviati on s, and terms that have s peci al meanin g i n th is man- ual. (C hapter 1 d iscusses n otational co nventions and general terminol ogy .) absolute error The maximum dif ference between corresponding actual and ideal co de trans itions .
8XC196 L X SUPPLEMENT Glossary-2 byte Any 8 -b it unit of da ta. BYTE An unsigned, 8 -bit variable with valu es from 0 throug h 2 8 –1. CCBs Chip con f iguration byte s. The ch ip configuration regis ters ( CCRs ) are loaded with the contents of the CCBs a ft er a reset.
Glossary-3 GLOSSARY contention The detection of conflictin g symbols or b its on the bus. cr osstalk See off-isola tion. DC inp u t leakag e Leakage current fro m an analog input pin to ground or to the reference v oltage (V REF ). deassert The act of makin g a signal inactive (disabled).
8XC196 L X SUPPLEMENT Glossary-4 external address A 21 -bit a ddress is pres ented on the microcon trol l er’ s pins. The address deco ded by an external device depen ds on ho w many of these a ddress pins the external system uses. See also intern al addr ess .
Glossary-5 GLOSSARY internal address The 24-bit address tha t the micro con troller generates. See also external addr ess . interrupt controller The module resp on sible for handling in terrupts that are to be ser viced by interrupt ser vice r outines th at you prov ide.
8XC196 L X SUPPLEMENT Glossary-6 maskable interrupts All interrupts except stack o verflow , unimplemented opcode, and so ftware trap. Maskable interrupts can be disabled (masked) by t he individual mask bits in t he interrupt mask registers, and their servicing can be disabled by the DI (dis able interrupt service) instruction.
Glossary-7 GLOSSARY nonlinearity The maximum d eviation o f code transit ions of the term inal-b ased chara cteris tic from the corre- sponding code transitions of the ideal characte ris tic . nonmaskab le interrupts Interrupts that cann ot be masked (disabled) an d cannot be assign ed to the P TS for processing.
8XC196 L X SUPPLEMENT Glossary-8 prioritized interrupt NMI, stack overflow , or any maskable i nterrupt . T w o of the no nmask able interr upts (unimplemented opcode and software trap ) are not prioritized; they vector directly to the interru pt s e rvice routine when executed.
Glossary-9 GLOSSARY P TS vector A location in special-purpo se memory t hat holds the starti ng address of a PTS co ntr ol block . QUAD-WORD An unsigned, 64 -bi t variable with values from 0 throug h 2 64 –1 . The QUAD-WORD variable is supported on ly as the operand for the EB MOVI instruction .
8XC196 L X SUPPLEMENT Glossary-10 sample time u ncertainty The va ri ation in the sample time . sample w indow The period of time that begins when the sample capacitor is attached to a selected channel of an A/D converter and ends when the sample capacitor is disconnected from the selected channel.
Glossary-11 GLOSSARY special-purpose memory A partit ion of memory used for storing th e interrupt vectors , PTS vectors , ch i p configu ration bytes, and sever al reser ved locations. standard interrupt Any mas k ab le in terrupt t hat is assigned to th e interrupt con troller for pr ocessi ng by a n interrupt service routine .
8XC196 L X SUPPLEMENT Glossary-12 V CC rejection The proper ty of an A/D converter that causes it to ignore (reject) changes in V CC so that the actual characteristic is unaf fected by those chan ges. The effectiven ess of V CC r ejection is measured by the ratio of the chang e in V CC to the change in the actual characteristic .
Index.
.
Index-1 INDEX A Address map, 3-1 Address par titions map, 3-1 OTPROM, 11-1 program memory , 11-1 spec ial-pu rpo se me mory , 11 -1 ALE, idle, powerdown, reset status, A-8, A-9 B Bloc k dia g r am 8XC.
Index-2 P Period (t), 2 -4 Port 0 idle, powerdown, reset status, A-8, A-9 overview, 5-1 Port 1 config uring, 5-3 idle, powerdown, reset status, A-8, A-9 overview, 5-1 Port 2 config uring, 5-3 idle, powerdown, reset status, A-8, A-9 overview, 5-1 P2.
Ein wichtiger Punkt beim Kauf des Geräts Intel 87C196CA (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Intel 87C196CA noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Intel 87C196CA - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Intel 87C196CA reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Intel 87C196CA erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Intel 87C196CA besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Intel 87C196CA verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Intel 87C196CA. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Intel 87C196CA gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
