Benutzeranleitung / Produktwartung E1902S des Produzenten Iiyama
Zur Seite of 39
USER MANUAL Thank you very much for choosing the iiyama LCD monitor . We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor . Please keep this manual in a safe place for your future reference.
ENGLISH Congratulations! The product you have just purchased carries the TCO’06 Media Displays label. This means that your display is designed and manufactured according to some of the strictest performance and environmental criteria in the world.
ENGLISH Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world.
ENGLISH FCC DECLARA TION OF CONFORMITY Model Number: PL1902 / PL1902W Trade Name: iiyama Responsible party: Ampronix Inc. Address: 8697 Research Dr. Irvine, CA.92618 U.S.A. T elephone number: 949-788-9930 This device complies with Part 15 of the FCC Rules.
ENGLISH T ABLE OF CONTENTS FOR YOUR SAFETY ...................................................................................................... 1 SAFETY PRECAUTIONS ....................................................................................
ENGLISH 1 FOR YOUR SAFETY FOR YOUR SAFETY W ARNING STOP OPERA TING THE MONIT OR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately .
ENGLISH CAUTION INST ALLA TION LOCA TION Do not install the monitor where sudden temperature changes may occur , or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. Y ou should also avoid areas where the sun shines directly on the monitor .
ENGLISH The following symptoms are normal with LCD monitors and do not indicate a problem. NOTE When you first turn on the LCD monitor , the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position.
ENGLISH BEFORE YOU OPERA TE THE MONIT OR FEA TURES 48cm (19") TFT Color LCD Monitor Supports Resolutions up to 1280 × 1024 : ProLite E1902S / B1902S .
ENGLISH 5 BEFORE YOU OPERA TE THE MONITOR CAUTION * 1 The rating of the Power Cable enclosed in 120V area is 10A/125V . If you are using a power supply higher than this rating, then a power cable with a rating of 10A/ 250V must be used.
ENGLISH FITTING AND REMOV AL OF BASE : ProLite E1902S / E1902WS / E1902WSV Install the stand on a stable surface. The monitor may cause injury or damage if it falls or is dropped. CAUTION Do not give a strong impact to the monitor . It may cause damage.
ENGLISH CONTROLS AND CONNECTORS : ProLite E1902S / E1902WS / E1902WSV A Menu Button (MENU) B + Button ( ) C Power Switch ( ) D – Button ( ) E Auto Button (AUTO) F Power Indicator Blue: Normal operat.
ENGLISH BEFORE YOU OPERA TE THE MONIT OR 8 CONTROLS AND CONNECTORS : ProLite B1902S A Menu Button (MENU) B + Button ( ) C Power Switch ( ) D – Button ( ) E Auto Button (AUTO) F Power Indicator Blue:.
ENGLISH Audio Cable (Accessory) Computer D-Sub Signal Cable (Accessory) DVI-D Signal Cable* Power Cable (Accessory) CONNECTING YOUR MONITOR : ProLite E1902S / E1902WS / E1902WSV [Example of Connection] A Ensure that both the computer and the monitor are switched off.
ENGLISH BEFORE YOU OPERA TE THE MONIT OR 10 CONNECTING YOUR MONITOR : ProLite B1902S [Example of Connection] A Ensure that both the computer and the monitor are switched off. B Connect the computer to the monitor with the signal cable. (See page 34 for CONNECTOR PIN ASSIGNMENT .
ENGLISH ADJUSTING THE VIEWING ANGLE : ProLite E1902S / E1902WS / E1902WSV For optimal viewing it is recommended to look at the full face of the monitor . Hold the stand so that the monitor does not topple when you change the monitor’s angle.
ENGLISH BEFORE YOU OPERA TE THE MONIT OR 12 ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite B1902S For optimal viewing it is recommended to look at the full face of the monitor , then adjust the monitor's Height and angle to your own preference.
ENGLISH 13 OPERA TING THE MONIT OR The bar shows the progress of the adjustment being made. + – 50 V-Position Menu:1 1280 × 1024 H:80.0KHz V:75.0Hz OPERA TING THE MONIT OR T o create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 33.
ENGLISH ADJUSTMENT MENU CONTENTS Y ou can skip the Menu pages and display an adjustment scale directly by using the following button operations. Brightness / Contrast / V olume: T o display direct menu press either of the +/- Buttons. Continue to use the +/- Buttons to select the adjustments required.
ENGLISH 15 OPERA TING THE MONIT OR Menu:1 1280 × 1024 H:80.0KHz V:75.0Hz Adjustment Item Problem / Option Button to Press T oo dark T oo bright Brightness * 1 Contrast T oo dull T oo intense T o corr.
ENGLISH 1280 × 1024 H:80KHz V:75.0Hz Menu:2 Menu : 2 (Analog) On Problem / Option Button to Press Adjustment Item Color T emp. Color 1: 9300K Sharpness 1 2 3 4 5 Adjust the picture quality at resolutions of less than 1280 × 1024 (ProLite E1902S / B1902S), 1440 × 900 (ProLite E1902WS / E1902WSV).
ENGLISH 17 OPERA TING THE MONIT OR Normal Menu : 2 (Analog) Return to Menu Highlight “Menu : 2” again. Off Mode1 High contrast Dark Gamma Mode1 Brightness of back-light is reduced.
ENGLISH Menu : 3 (Analog) Japanese Adjustment Item Menu:3 1280 × 1024 H:80.0KHz V:75.0Hz Problem / Option Button to Press OSD Position 1 2 3 4 5 Y ou can move the OSD display area to any one of the f.
ENGLISH 19 OPERA TING THE MONIT OR User 1280 × 1024 H:80.0KHz V:75.0Hz Menu:1 G R B Adjustment Item Problem / Option Button to Press T oo dark T oo bright Brightness * 1 Contrast T oo dull T oo intense * 1 Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright.
ENGLISH Menu : 1 (Digital) Return to Menu Highlight “Menu : 1” again. Mode1 Brightness of back-light is reduced. Mode2 Brightness of back-light is reduced more than Mode1. Economy Mode Off Normal Problem / Option Adjustment Item NOTE is displayed while Economy Mode is active.
ENGLISH 21 OPERA TING THE MONIT OR Menu : 2 (Digital) Japanese Adjustment Item Menu:2 1280 × 1024 H:80.0KHz V:75.0Hz Problem / Option Button to Press OSD Position 1 2 3 4 5 Y ou can move the OSD disp.
ENGLISH SCREEN ADJUSTMENTS The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use.
ENGLISH 23 OPERA TING THE MONIT OR + – F F F F F 1) Adjust the H-Position so that the left side of the picture frame will move to the left edge of the display area. NOTE When the left side of the picture frame moves apart from the left edge of the display area during the Clock adjustment, adjust steps 1) and 2).
ENGLISH NOTE In case the strong flicker or blurs remain on a part of the screen, repeat steps F and G because the Clock may not be adjusted correctly . If the flicker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from C again.
ENGLISH 0 2 W 100% POWER CONSUMPTION Blue Orange Power Indicator NORMAL MODE POWER MANAGEMENT MODE Even when using the power management mode, the monitor consumes electricity . T urn off the Power Switch whenever the monitor is not in use, during the night and weekends, to avoid unnecessary power consumption.
ENGLISH TROUBLE SHOOTING Perform the adjustments described in OPERA TING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERA TING THE MONITOR or if the problem persists.
ENGLISH Problem Check No sound. The Audio Cable is properly connected. The audio output level of the audio equipment is within the specification of the monitor . F The audio equipment (computer etc.) is ON. The V olume is turned up. The Mute is OFF .
ENGLISH APPENDIX SPECIFICA TIONS: ProLite E1902S LCD Panel Size Driving system a-Si TFT Active Matrix Diagonal: 48cm / 19" 0.294mm H × 0.294mm V Response time Pixel pitch 5ms (Black, white, black), 2ms (Gray to Gray) Display Colors Approx. 16.7 million maximum Sync Frequency Dot Clock 135MHz maximum Maximum Resolution 1280 × 1024, 1.
ENGLISH 29 APPENDIX SPECIFICA TIONS: ProLite E1902WS LCD Panel Size Driving system a-Si TFT Active Matrix Diagonal: 48cm / 19" 0.285mm H × 0.285mm V Response time Pixel pitch 5ms (Black, white, black), 2ms (Gray to Gray) Display Colors Approx. 16.
ENGLISH SPECIFICA TIONS: ProLite E1902WSV LCD Panel Size Driving system a-Si TFT Active Matrix Diagonal: 48cm / 19" 0.285mm H × 0.285mm V Response time Pixel pitch 5ms (Black, white, black), 2ms (Gray to Gray) Display Colors Approx. 16.7 million maximum Sync Frequency Dot Clock 137MHz maximum Maximum Resolution 1440 × 900, 1.
ENGLISH SPECIFICA TIONS: ProLite B1902S LCD Panel Size Driving system a-Si TFT Active Matrix Diagonal: 48cm / 19" 0.294mm H × 0.294mm V Response time Pixel pitch 5ms (Black, white, black), 2ms (Gray to Gray) Display Colors Approx. 16.7 million maximum Sync Frequency Dot Clock 135MHz maximum Maximum Resolution 1280 × 1024, 1.
ENGLISH 407.5mm/16.0" 378.5mm/14.9" 300.5mm/11.8" 303.0mm/11.9" 357.0mm/14.1" 60.0mm/2.4" 393.0mm/15.5" (503.0mm/19.8") 236.5mm/9.3" 438.5mm/17.3" 412.5mm/16.2" 204.0mm/8.0" 258.5mm/10.2" 310.
ENGLISH 33 APPENDIX 640 × 480 832 × 624 1024 × 768 COMPLIANT TIMING * 1 Available for ProLite E1902WS / E1902WSV only . * 2 DVI input is not compliant. NOTE Dot Clock 25.175MHz 31.500MHz 31.500MHz 36.000MHz 40.000MHz 49.500MHz 50.000MHz 65.000MHz 75.
ENGLISH 11 1 Input Signal CONNECTOR PIN ASSIGNMENT D-Sub mini 15pin Connector 3 Red video 8 Pin 2 4 5 6 7 Pin Blue video Green video ground Blue video ground 9 10 12 13 Ground Input Signal V -Sync 15 14 Red video ground Data line (SDA)* Clock line (SCL)* * Compliant to VESA DDC.
Ein wichtiger Punkt beim Kauf des Geräts Iiyama E1902S (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Iiyama E1902S noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Iiyama E1902S - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Iiyama E1902S reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Iiyama E1902S erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Iiyama E1902S besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Iiyama E1902S verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Iiyama E1902S. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Iiyama E1902S gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
