Benutzeranleitung / Produktwartung B1702S des Produzenten Iiyama
Zur Seite of 39
USER MANUAL Thank you very much for choosing the iiyama LCD monitor . We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor . Please keep this manual in a safe place for your future reference.
ENGLISH Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world.
ENGLISH FCC DECLARA TION OF CONFORMITY Model Number: PL1702 / PL1702W Trade Name: iiyama Responsible party: Ampronix Inc. Address: 8697 Research Dr. Irvine, CA.92618 U.S.A. T elephone number: 949-788-9930 This device complies with Part 15 of the FCC Rules.
ENGLISH We recommend recycling of used product. Please contact your dealer or iiyama service center . Recycle information is obtained via the Internet, using the address: http://www .iiyama.com Y ou can access the Web page of dif ferent countries from there.
ENGLISH FOR YOUR SAFETY 1 FOR YOUR SAFETY W ARNING STOP OPERA TING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately .
ENGLISH CAUTION INST ALLA TION LOCA TION Do not install the monitor where sudden temperature changes may occur , or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. Y ou should also avoid areas where the sun shines directly on the monitor .
ENGLISH The following symptoms are normal with LCD monitors and do not indicate a problem. NOTE When you first turn on the LCD monitor , the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position.
ENGLISH BEFORE YOU OPERA TE THE MONIT OR FEA TURES 43cm (17") TFT Color LCD Monitor Supports Resolutions up to 1280 × 1024 : ProLite E1702S / E1702SV / B1.
ENGLISH BEFORE YOU OPERA TE THE MONIT OR 5 CAUTION * 1 The rating of the Power Cable enclosed in 120V area is 10A/125V . If you are using a power supply higher than this rating, then a power cable with a rating of 10A/ 250V must be used.
ENGLISH Install the stand on a stable surface. The monitor may cause injury or damage if it falls or is dropped. CAUTION Do not give a strong impact to the monitor . It may cause damage. Unplug the monitor before installation to avoid electric shock or damage.
ENGLISH A Menu Button (MENU) B + Button ( ) C Power Switch ( ) D – Button ( ) E Auto Button (AUTO) F Power Indicator Blue: Normal operation Orange: Power Management Auto (Signal Select) When no signal is received from the system, the display enters into its Power Management Mode reducing power consumption to < than 2W .
ENGLISH 8 BEFORE YOU OPERA TE THE MONIT OR CONTROLS AND CONNECTORS : ProLite B1702S A Menu Button (MENU) B + Button ( ) C Power Switch ( ) D – Button ( ) E Auto Button (AUTO) F Power Indicator Blue:.
ENGLISH Audio Cable (Accessory) Computer D-Sub Signal Cable (Accessory) DVI-D Signal Cable* Power Cable (Accessory) [Example of Connection] A Ensure that both the computer and the monitor are switched off. B Connect the computer to the monitor with the signal cable.
ENGLISH CONNECTING YOUR MONITOR : ProLite B1702S [Example of Connection] A Ensure that both the computer and the monitor are switched off. B Connect the computer to the monitor with the signal cable. (See page 35 for CONNECTOR PIN ASSIGNMENT .) C Connect the monitor to the audio equipment with the Audio Cable when using the audio features.
ENGLISH For optimal viewing it is recommended to look at the full face of the monitor . Hold the stand so that the monitor does not topple when you change the monitor’s angle. Y ou are able to adjust the monitor ’s angle up to 20 degrees upward, 5 degrees downward.
ENGLISH ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite B1702S For optimal viewing it is recommended to look at the full face of the monitor , then adjust the monitor's Height and angle to your own preference. Hold the stand so that the monitor does not topple when you change the monitor’s angle.
ENGLISH The bar shows the progress of the adjustment being made. + – 50 V-Position Menu:1 1280 × 1024 H:80.0KHz V:75.0Hz OPERA TING THE MONITOR T o create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 34.
ENGLISH 14 OPERA TING THE MONITOR ADJUSTMENT MENU CONTENTS Y ou can skip the Menu pages and display an adjustment scale directly by using the following button operations. Brightness / Contrast / V olume: T o display direct menu press either of the +/- Buttons.
ENGLISH Menu:1 1280 × 1024 H:80.0KHz V:75.0Hz Adjustment Item Problem / Option Button to Press T oo dark T oo bright Brightness * 1 Contrast T oo dull T oo intense T o correct flickering text or line.
ENGLISH 16 OPERA TING THE MONITOR 1280 × 1024 H:80KHz V:75.0Hz Menu:2 Menu : 2 (Analog) On Problem / Option Button to Press Adjustment Item Color T emp. Color 1: 9300K Sharpness 1 2 3 4 5 Adjust the picture quality at resolutions of less than 1280 × 1024 (ProLite E1702S / E1702SV / B1702S), 1440 × 900 (ProLite E1702WS / E1702WSV).
ENGLISH Normal Menu : 2 (Analog) Return to Menu Highlight “Menu : 2” again. Off Mode1 High contrast Dark Gamma Mode1 Brightness of back-light is reduced. Mode2 Brightness of back-light is reduced more than Mode1. Economy Mode Off Normal Mode2 Problem / Option Adjustment Item NOTE is displayed while Economy Mode is active.
ENGLISH 18 OPERA TING THE MONITOR Menu : 3 (Analog) Japanese Adjustment Item Menu:3 1280 × 1024 H:80.0KHz V:75.0Hz Problem / Option Button to Press OSD Position 1 2 3 4 5 Y ou can move the OSD displa.
ENGLISH User 1280 × 1024 H:80.0KHz V:75.0Hz Menu:1 G R B Adjustment Item Problem / Option Button to Press T oo dark T oo bright Brightness * 1 Contrast T oo dull T oo intense * 1 Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright.
ENGLISH 20 OPERA TING THE MONITOR Menu : 1 (Digital) Return to Menu Highlight “Menu : 1” again. Mode1 Brightness of back-light is reduced. Mode2 Brightness of back-light is reduced more than Mode1. Economy Mode Off Normal Problem / Option Adjustment Item NOTE is displayed while Economy Mode is active.
ENGLISH Menu : 2 (Digital) Japanese Adjustment Item Menu:2 1280 × 1024 H:80.0KHz V:75.0Hz Problem / Option Button to Press OSD Position 1 2 3 4 5 Y ou can move the OSD display area to any one of the .
ENGLISH 22 OPERA TING THE MONITOR SCREEN ADJUSTMENTS The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use.
ENGLISH + – F F F F F 1) Adjust the H-Position so that the left side of the picture frame will move to the left edge of the display area. NOTE When the left side of the picture frame moves apart from the left edge of the display area during the Clock adjustment, adjust steps 1) and 2).
ENGLISH NOTE In case the strong flicker or blurs remain on a part of the screen, repeat steps F and G because the Clock may not be adjusted correctly . If the flicker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from C again.
ENGLISH 0 2 W 100% POWER CONSUMPTION Blue Orange Power Indicator NORMAL MODE POWER MANAGEMENT MODE Even when using the power management mode, the monitor consumes electricity . T urn off the Power Switch whenever the monitor is not in use, during the night and weekends, to avoid unnecessary power consumption.
ENGLISH 26 TROUBLE SHOOTING TROUBLE SHOOTING Perform the adjustments described in OPERA TING THE MONIT OR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERA TING THE MONITOR or if the problem persists.
ENGLISH Problem Check No sound. The Audio Cable is properly connected. The audio output level of the audio equipment is within the specification of the monitor . F The audio equipment (computer etc.) is ON. The V olume is turned up. The Mute is OFF .
ENGLISH 28 APPENDIX APPENDIX SPECIFICA TIONS: ProLite E1702S LCD Panel Size Driving system a-Si TFT Active Matrix Diagonal: 43cm / 17" 0.264mm H × 0.264mm V Response time Pixel pitch ProLite E1702S-1: 5ms (Black, white, black), 2ms (Gray to Gray) ProLite E1702S-2: 5ms (Black, white, black) Display Colors Approx.
ENGLISH SPECIFICA TIONS: ProLite E1702SV LCD Panel Size Driving system a-Si TFT Active Matrix Diagonal: 43cm / 17" 0.264mm H × 0.264mm V Response time Pixel pitch ProLite E1702SV -1: 5ms (Black, white, black), 2ms (Gray to Gray) ProLite E1702SV -2: 5ms (Black, white, black) Display Colors Approx.
ENGLISH 30 APPENDIX SPECIFICA TIONS: ProLite E1702WS LCD Panel Size Driving system a-Si TFT Active Matrix Diagonal: 43cm / 17" 0.255mm H × 0.255mm V Response time Pixel pitch 8ms (Black, white, black) Display Colors Approx. 16.2 million maximum Sync Frequency 137MHz maximum Maximum Resolution 1440 × 900, 1.
ENGLISH SPECIFICA TIONS: ProLite E1702WSV LCD Panel Size Driving system a-Si TFT Active Matrix Diagonal: 43cm / 17" 0.255mm H × 0.255mm V Response time Pixel pitch 8ms (Black, white, black) Display Colors Approx. 16.2 million maximum Sync Frequency Dot Clock 137MHz maximum Maximum Resolution 1440 × 900, 1.
ENGLISH 32 APPENDIX SPECIFICA TIONS: ProLite B1702S LCD Panel Size Driving system a-Si TFT Active Matrix Diagonal: 43cm / 17" 0.264mm H × 0.264mm V Response time Pixel pitch ProLite B1702S-1: 5ms (Black, white, black), 2ms (Gray to Gray) ProLite B1702S-2: 5ms (Black, white, black) Display Colors Approx.
ENGLISH 370.5mm/14.6" 339.5mm/13.4" 300.5mm/11.8" 272.0mm/10.7" 330.0mm/13.0" 59.5mm/2.3" 397.0mm/15.6" (507.0mm/20.0") 236.5mm/9.3" DIMENSIONS : ProLite B1702S 400.5mm/15.8" 368.5mm/14.5" 174.0mm/6.
ENGLISH 34 APPENDIX 640 × 480 832 × 624 1024 × 768 COMPLIANT TIMING * 1 Available for ProLite E1702WS / E1702WSV only . * 2 DVI input is not compliant. NOTE Dot Clock 25.175MHz 31.500MHz 31.500MHz 36.000MHz 40.000MHz 49.500MHz 50.000MHz 65.000MHz 75.
ENGLISH 11 1 Input Signal CONNECTOR PIN ASSIGNMENT D-Sub mini 15pin Connector 3 Red video 8 Pin 2 4 5 6 7 Pin Blue video Green video ground Blue video ground 9 10 12 13 Ground Input Signal V -Sync 15 14 Red video ground Data line (SDA)* Clock line (SCL)* * Compliant to VESA DDC.
Ein wichtiger Punkt beim Kauf des Geräts Iiyama B1702S (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Iiyama B1702S noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Iiyama B1702S - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Iiyama B1702S reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Iiyama B1702S erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Iiyama B1702S besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Iiyama B1702S verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Iiyama B1702S. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Iiyama B1702S gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
