Benutzeranleitung / Produktwartung PPC 6700 des Produzenten IGo Direct
Zur Seite of 32
www.igo.com iGo ™ Stowaway ® Bluetooth ® Mouse Owner’s Manual for Pocket PC 2003/Windows Mobile ™ 5 Apple Macintosh OS X Microsoft ® Windows XP Mouse/Keyboard Driver: Stowaway 4.
Installing the Mouse with Macintosh OS X .................... 3 Before You Begin .................................................................................... 3 Creating a Paired Connection with your Macintosh ............................ 3 Installing the Mouse for Use with Windows XP .
Installing the Mouse with Macintosh OS X Before You Begin ¾ Determine that your Macintosh is Bluetooth-enabled with either a built-in Bluetooth component, or via an ex ternal hardware adaptor (Dongle). ¾ Ensure that the accompanying Bluet ooth software (Stack) is installed.
Installing the Mouse for Use with Windows XP Before You Begin ¾ Determine that your PC is Bluet ooth-enabled with either a built-in Bluetooth component, or via an ex ternal hardware adaptor (Dongle). ¾ Ensure that the accompanying Bluet ooth software (Stack) is installed.
Setting up the Mouse with Pocket PC Before You Begin Before you install the Stowaway keyboa rd and mouse software for Pocket PC 2003/Windows Mobile 5.0 PDAs: ¾ ActiveSync 4.
Configuring the Mouse to Your Device 1. After the driver installation completes, the Stowaway Settings screen will display and you will be prompted to Choose device to setup . Select the Stowaway Bluetooth Mouse and tap Setup . 2. The Select mouse pointer mode screen will display for selecting Enhanced or Safe pointer mode: a.
4. Once the PDA resets, the Confirm mouse pointer mode screen will display. If the PDA display is working properly, accept Enhanced mode by selecting Enhanced again, and tapping OK . Otherwise, select Safe and tap OK . 5. On Pocket PC devices with Windows Mobile 5.
7. Then tap the Connect button on the screen. The status will read Scanning for a mouse . 8. The status will change to Initializing connection. During the initialization stage, the application starts the Pocket PC Bluetooth system software, known as the Bluetooth Stack .
10. If the connection process is successful, the Mouse connection enabled message will display on the Pocket PC device. This is the normal mode for wireless communication between the Stowaway Mouse and the Pocket PC device during use.
13. If the mouse has previously been connected with your Pocket PC but you have pressed the Discoverable mode button during normal use, the mouse will lose its bond with your handheld device. Tap Connect to reestablish the bond. 14. On the Advanced page, there are buttons provided to select Power efficient mode and Mouse Pointer mode.
15. When the mouse batteries reach Low or Critical, a warning message will also be displayed on the Today screen. 16. If the mouse driver fails to detect a supported Bluetooth stack during the initial setup or at a later time (e.g. after power on), it will display the Bluetooth system not detected message on the Connection page.
Reconnecting the Stowaway Mouse Despite a high degree of reliability, th e Bluetooth connection could break for many reasons: ¾ When the mouse is powered off, the mouse circuit will be powered off, and the Bluetooth connection will be lost.
Bluetooth Accessibility For those using Windows Mobile 2003 or a non-Microsoft Bluetooth stack, there are two Bluetooth settings that affect how the mouse and the mobile device connect.
Customizing Mouse Functions Once the mouse software is installe d on the Pocket PC device, you may customize the options. A mouse icon will display in the lower right corner of the screen while using Calend ar, Contacts, or other applications. ¾ Tap the mouse icon on the bottom toolbar to display the Mouse Control Panel.
Mouse Control Panel On the Mouse tab: ¾ Tap Enable to choose which device to enable (the next screen will allow you to select the Stowaway Mouse ). Tap Disable to turn off access to the mouse.
Disabling the Stowaway Mouse When the Stowaway Mouse is no longer needed, you can disable it by tapping the Disable button, on the Connection or Mouse page. The Connection is not set up message will then be displayed on the Connection page. NOTE: Disabling the Stowaway Mouse w ill not automatically turn off the Bluetooth radio.
Using the Stowaway Mouse Moving the Pointer/Highlighting Text Using default mouse functions: Mous e movements and Mouse butt on clicks, you can easily navigate, position the cursor, and select text for su bsequent editing functions.
Menu and Toolbar Navigation You can access program menus, submenus, and toolbars with the Stowaway Mouse using the following activities. Action To activate a program’s menu bar at t he bottom of the.
Frequently Asked Questions Q: My mouse and handheld are in -range and powered on, why won’t they reconnect after a mouse button pres s? If Bluetooth Accessibility is set to Paired devices only, the mouse may not automatically reconnect.
Q: I received an error message saying the keyboard/mouse driver cannot find a supported Bluetooth component, w hat should I do? The current version of the keyboa rd/mouse driver supports Widcomm Bluetooth for Windows CE (BTW-CE) version 1.4.1 or lat er, and Microsoft stack version TBD.
Legal Notices Mobility California, Inc. and its affiliate s shall not be liable for technical or editorial errors or omissions containe d herein or for special, indirect, incidental or consequential damages whatsoever in connection with the furnishing, performance, or use of th is material.
Warranty Mobility California warrants this produc t against defects in materials and workmanship under normal us e for a period of one (1) year from the date of original retail purchase.
Obtaining Warranty Service Customer must contact Mobility Califor nia within the applicable warranty period to obtain warranty service auth orization. Dated proof of original purchase will be required for warrant y service, repair, or replacement.
Important Battery Information • Keep batteries away from children. • Do not mix batteries of different types or old and new batteries. • Always replace old, weak or worn-o ut batteries promptly and recycle or dispose of them properly. Be fore inserting new batteries, the battery compartment should be clea ned.
Important notes about Bluetooth devices The Stowaway Bluetooth mouse can em it radio frequency (RF) energy whenever the batteries are installed and the power switch is turned on.. Care should be taken when used aro und medical devices or equipment. For specific information, consult with the product manufacturer or your physician before use.
Wireless Regulatory Information The Stowaway device must be used in strict accordance with the manufacturer's instructions as describ ed in the user documentation that comes with the product. For country-spec ific approvals, see Radio approvals. Mobility California, Inc.
FCC Notices This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecti on against harmful interference in a residential installation.
FCC Identification Information The following information is provided on the device or devices covered in this document in compliance with FCC regulations: • Model number(s): MSBT01 • Company name: Mobility Electronics, Inc. 9918 Via Pasar San Diego, California 92126 United States of America 1.
Europe – CE Declaration of Conformity EN 301 489-1 (2004), EN 301 489-17 (2002), EN 300 328-1 (2001), EN 300 328-2 (2001), EN 60950 (2001) English Hereby, Mobility California, In c. declares that this MSBT01 is in compliance with the esse ntial requirements and other relevant provisions of Directive 1999/5/EC.
Swedish Härmed intygar Mobility California, Inc. att denna MSBT01 står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
France Some areas of France have a restricte d frequency band. The worst case maximum authorized power indoors is: 10 mW for the entire 2.4 GHz band (2400 MHz–2483.5 MHz). 100 mW for frequencies between 2446.5 MHz and 2483.5 MHz (NOTE— Channels 10 through 13 inclusive operate in the band 2446.
Features and Specifications Summary • Small, palm-sized design makes it easy to put in your pocket or briefcase. • Simple connection compatibility with yo ur Pocket PC device via Bluetooth. • Large, accessible mouse buttons and rubberized scroll wheel.
Ein wichtiger Punkt beim Kauf des Geräts IGo Direct PPC 6700 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie IGo Direct PPC 6700 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für IGo Direct PPC 6700 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von IGo Direct PPC 6700 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über IGo Direct PPC 6700 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon IGo Direct PPC 6700 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von IGo Direct PPC 6700 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit IGo Direct PPC 6700. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei IGo Direct PPC 6700 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
