Benutzeranleitung / Produktwartung IC-F9511HT des Produzenten Icom
Zur Seite of 32
INSTR UCTION MANU AL This de vice complies with Part 15 of the FCC Rules. Op - eration is subject to the condition that this device does not cause harmful interference.
i IMPOR T ANT READ ALL INSTRUCTIONS carefully and com - pletely bef ore using the transceiv er . SA VE THIS INSTRUCTION MANU AL — Th is instruction manual contains impor tant oper ating instr uctions f or the IC-F9511HT VHF MOBILE TRANSCEIVER .
ii FCC INFORMA TION • FOR CLASS B UNINTENTIONAL RADIA TORS: This equipment has been tested and f ound to comply with the limits for a Class B digital device , pursuant to par t 15 of the FCC Rules. These limits are designed to pro vide reasonab le protection against har mful interference in a residential instal- lation.
iii R W ARNING! NEVER connect the transceiver to an AC outlet. This may pose a fire hazard or result in an electric shock. R W ARN ING! NEVER co nne ct th e tra nsc eiver t o a power source of more than 16 V DC or use rev erse polar ity . This could cause a fire or damage the transceiv er.
iv T ABLE OF CONTENTS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 IMPOR T ANT .......................................................................... i EXPLICIT DEFINITIONS ....................................................... i FCC INFORMA TION .....
1 1 P ANEL DESCRIPTION n Fr ont panel— Controller 01 ch - 0 1 IC-F95 11HT o q e w yr ut i !0 q AF V OLUME CONTROL KNOB Rotate the knob to adjust the audio output le vel. • Minimumaudiolev elispre-programmed. w FUNCTION DISPLA Y (p .
2 1 P ANEL DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 y PO WER SWITCH [PO WER] Push to turn the power ON and OFF . • Thefollowingfunctionsarea vailab leatpowerONasoptions: - Automatic scan start - P assword prompt - Set mode u TRANSMIT INDICA TOR Lights red while transmitting.
3 1 P ANEL DESCRIPTION n Function displa y— Controller 01 c h- 0 1 Ic-F95 11 H T u qw er ty i !0 o q RECEIVED SIGNAL STRENGTH INDICA T OR Indicates relative signal strength le vel. W eak Receive Signal le ve l Strong w LO W PO WER INDICA TOR Appears when low output po wer is selected.
4 1 P ANEL DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 n Pr ogrammable function keys The following functions can be assigned to [UP] , [DO WN] , [P0] , [P1] , [P2] , [P3] and [P4] programmab le function keys . Consult y our Icom dealer or system operator for details con- cerning your transceiv ers programming.
5 1 P ANEL DESCRIPTION PRIO A/B KEYS ➥ Push to select Priority A or Pr iority B channel. ➥ Push and hold [Prio A (Rewrite)] or [Prio B (Rewrite)] f or 1 sec. to assign the operating channel to the Pr iority A or Prior ity B channel. MR-CH 1/2/3/4 KEYS Push to select the memor y channel 1, 2, 3 or 4.
6 1 P ANEL DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 LIGHT KEY Push to tur n the transceiver’ s backlight ON for about 5 sec. when the backlight function is tur ned OFF in user set mode. (p . 12) HIGH/LO W KEY Push to select the transmit output power temporarily or per- manently , depending on the pre-setting.
7 2 B ASIC OPERA TION n T urning po wer ON When y ou use the transceiver f or the first time, or after the transceiv er has been left unused for a long time, make sure to check th e date and time indic ation afte r turning the power ON. If the time and date are not correct, reset them.
8 2 BASIC OPERA TION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 n Receiving and transmitting Receiving: q Push [ ] to turn the power ON. w Push [CH Up] or [CH Down] to select a channel in se - quence. e While receiving a call, adjust the audio output lev el to a comf or table listening le vel.
9 2 BASIC OPERA TION n Cloc k function The transceiver indicates the current time and date when [Clock] is pushed. And y ou can change the indication format and time/date settings.
10 2 BASIC OPERA TION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 t Push [Clock] to set. • Thene xtitemblinks. 12HR 03 :00P M YM D0 8- 04-0 1 y Repeat steps e to t to set items. u After setting, push and hold [Cloc k] for 1 sec. to program.
11 2 BASIC OPERA TION t P ush [C H U p] or [C H D own] to in put th e ‘h our ’ da ta for wak e up time. After inputting, push [Clock] to set. • The ‘minutes’ digitblinks. WAKE UP TIME 09:25A M y Push [CH Up] or [CH Down] to input the ‘minutes’ data f or wak e up time.
12 2 BASIC OPERA TION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 t Push [CH Up] or [CH Down] to enter the sleep time edit mode. • The ‘hour’ digitblinks. SLEE PT IM E 05:35P M y P ush [C H U p] or [C H D own] to in put th e ‘h our ’ da ta for sleep time.
e Push [P0] sev eral times to select the appropriate item. Then, push [Up] or [Down] to set the desired lev el/condi- tion. • A vailab le set mode functions are Backlight , LCD Contrast , Beep , Beep Level , Ringer Level , SQL Level , AF Min.
14 3 CONNECTION AND MAINTENANCE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 n Separation cable connection CA UTION: T o av oid damage to the transceiv er , disconnect the DC power cab le from the transceiv er before connecting the separation cab le. NO TE: The follo wing connections should be performed by your Icom dealer or distributor .
15 3 CONNECTION AND MAINTENANCE D Main unit q Unscrew the 4 screws of the front plate (either the left or right), then remove the front plate from the main unit.
16 3 CONNECTION AND MAINTENANCE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 + red _ blac k w ANTENNA CONNECT OR Connects to an antenna. Contact y our dealer about an- tenna selection and placement.
n Supplied Accessories KE Y- STICKER Microphone Microphone hanger and screw set Separation cable DC power cab le Ke y caps Housing Function name sti ck ers* 2 * 1 Fuses should be installed in the fuse holder of the blac k and red cables , respectively .
• Function name sticker s There are no names on the programmable function ke ys since the functions can be freely assigned to these ke ys. Attach the supplied function name stick ers as below to the appropriate ke ys for easy recognition of the key’ s assigned function.
D Controller 2 types of mounting styles are availab le— one is ov erhead mounting, and other one is on-board mounting. On-board mounting Bra ck et screw Overhead mounting • Mountthe controller securelywith the 4supplied screwsto a thick surface which can suppor t more than 2 kg (4.
n Antenna A k ey element in the perf or mance of any comm unication sys - tem is an antenna. Contact your dealer about antennas and the best places to mount them. n Fuse installation Fuses should be installed in the fuse holder of the blac k and red cables , respectively .
21 3 CONNECTION AND MAINTENANCE n Speaker connector inf ormation ui o rt y qw e Connector’ s front view Pin No. Name Description Specifications q IGN IGSW cont. In 0 − Vcc w RXSP1 RX AF Out (BTL) Output power : Max. 20 W Impedance : 4 ø e NC — — r HORN1* Horn dr iv e cont.
22 4 OPTIONS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 • OPC-607/OPC-608/OPC-609/OPC-726 s e p a r a t i o n c a b l e s Used for a controller and a main unit connection. OPC-607 : 3 m; 9.84 ft OPC-608 : 8 m; 26.3 ft OPC-609 : 1.9 m; 6.3 ft OPC-726 : 5 m; 16.
23 5 SAFETY TRAINING INFORMA TION WA RN IN G Y our Icom radio g enerates RF electroma gnetic en - ergy during transmit mode . This radio is designed for and classified as “Occupational Use Only”, meaning it m ust be used onl y during the course of employment by individuals aware of the hazards, and the wa ys to minimize such hazards.
MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16.
MEMO.
MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16.
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, J apan A-6718D-1US- w Printed in Japan © 2008−2010 Icom Inc. Printed on recycled paper with soy ink..
Ein wichtiger Punkt beim Kauf des Geräts Icom IC-F9511HT (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Icom IC-F9511HT noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Icom IC-F9511HT - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Icom IC-F9511HT reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Icom IC-F9511HT erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Icom IC-F9511HT besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Icom IC-F9511HT verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Icom IC-F9511HT. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Icom IC-F9511HT gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
