Benutzeranleitung / Produktwartung W2H des Produzenten IBM
Zur Seite of 68
Sure POS 30 0 In sta ll a ti o n an d S e rvi c e Gu i d e for 48 1 0 / 4 9 1 0 Mo d e l 3 1x, 3 2x, W2H GA27-4309-01 1 1-9-2005 .
.
Sure POS 30 0 In sta ll a ti o n an d S e rvi c e Gu i d e for 48 1 0 / 4 9 1 0 Mo d e l 3 1x, 3 2x, W2H GA27-4309-01 1 1-9-2005 .
Note Before using this information and the products it supports, be sure to read the safety information booklet (GA27-4004) and the general information under Appendix B, “Notices,” on page B-1.
Contents Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . .v About this guide . . . . . . . . . . . . . . . . . . . . . . . . vii Who should read this manual . . . . . . . . . . . . . . . . . . . . vii Related publications . . . . . . . .
Clear display . . . . . . . . . . . . . . . . . . . . . . . . A-10 Display position . . . . . . . . . . . . . . . . . . . . . . . A-10 Delete to end of line . . . . . . . . . . . . . . . . . . . . . A-10 Dimming . . . . . . . . . . . . . . . . . . . .
Figures 1-1. Dimensions of the 4810/4910 SurePOS 300 (does not include the I/O devices for the Express models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 1-2. Front view of 4810/4910 . . . . . . . . . . . . . . . . . . . . .
1 1-9-2005 vi SurePOS Installation and Service.
About this guide This guide provides product planning information, replacement and removal procedures, problem determination and parts listings of field-replaceable-units (FRUs) for the IBM 4810/4910 SurePOS ™ 300.
– 4820 T ouch Drivers for SurePOS 700 Series, which includes the MicroT ouch ™ T ouchWare ™ – POSS for DOS download Accessibility Accessibility features help a user who has a physical disability , such as restricted mobility or limited vision, to use the 4810/4910 SurePOS 300 successfully .
In accordance with the European WEEE Directive, electrical and electronic equipment (EEE) is to be collected separately and to be reused, recycled, or recovered at end of life.
T ell us what you think Y our feedback is important in helping us provide accurate and high-quality information. Please take a few moments to tell us what you think about this document. Yo u can use either of these ways to provide feedback: v V isit our Web site at http://www .
Summary of changes November 2005 v Inserted the new End-of-Life disposal statement v Inserted the new T ell us what you think statements v Added supported models to front cover February 2005 Updated i.
1 1-9-2005 xii SurePOS Installation and Service.
Chapter 1. Introduction This chapter describes the characteristics of the IBM 4810 SurePOS 300, which includes the machine type 4910. Product summary The 4810 consists of a personal computer (PC) core with expansion slots, Electronic Industries Association (EIA) 232 connectors, an Ethernet LAN adapter , and built-in video (VGA) support.
T able 1-2. Models and features (continued) Model Base-unit standard feature 4810-W2H 40-GB HDD, Microsoft ® Windows ® XP Professional preloaded 4910-32H/32E/32A 40-GB HDD Note: References in this guide to the 4810 Model 32x also apply to the 4810 Model W2H and 4910 Models 32H, 32E and 32A.
Environmental considerations T emperature and humidity requirements are as follows: v Operating: +10°C to 40°C (50° to 104°F) with 8% to 80% relative humidity v Shipping: −40°C to +60°C (−40° to 140° F), which includes condensation but not rain.
This network connection LED is on when the 4810/4910 is connected to a hub or switch. This LED blinks during receive/send transmission. Rear connectors See the rear connector for your 4810/4910 model: v Go to “Rear connectors 4810 (31x models).” v Go to “Rear connectors 32x models” on page 1-6.
Port for an Ethernet LAN cable. Mouse port. Port for a PS/2 or compatible keyboard. Microphone port. Audio input port. Port for audio output, such as self-amplified speakers power Power . The voltage switch allows you to select 100-127 V or 200-240 V ac.
Rear connectors 32x models Figure 1-4 shows the connections available on the 4810/4910 models 32x: USB ports. SVGA display port. A Port for external serial devices, such as a scale or a scanner . This port is COM1. B, C,D Ports for second, third, and fourth external serial devices.
Port for audio output, such as self-amplified speakers power Power . The voltage switch allows you to select 100-127 V or 200-240 V ac. Attention When installing a new power supply , be sure to set the correct input voltage for your area or you will damage the power supply .
Product introduction 1 1-9-2005 1-8 SurePOS Installation and Service.
Chapter 2. Disassembling the 4810/4910 SurePOS 300 This section describes how to disassemble the 4810/4910 SurePOS 300. 1. Unplug the power cord. 2. Remove the cover from the unit.
b. Using Figure 2-2, follow the directions for either an HDD or flash memory . v Press to release the tabs ( J ) on each side of the hard drive ( K ) and slide it out of the bracket ( I ). v To remove the compact flash: 1) Disconnect the cables from the compact flash 2) Remove the screws holding the assembly .
a. Unplug the connector and remove the screws that hold the power supply . b. Lift the power supply from the unit. Attention When installing a new power supply , be sure to set the correct input voltage for your area or the power supply will be damaged.
1 1-9-2005 2-4 SurePOS Installation and Service.
Chapter 3. Problem determination Note: Refer to IBM Safety Information - Read This First , GA27-4004, before beginning the procedures in this chapter .
Note: To troubleshoot problems with the 4610 SureMark Printer , please refer to the SureMark Printers Hardware Service Guide , GY27-0355. For other I/O devices bundled with the 4910, please refer to each device’s respective service guide.
Chapter 4. Parts catalog Assembly 1: Field-replaceable units . . . . . . . . . . . . . . . . . 4-2 This chapter provides parts information available for the Model 31x and 32x system units. See the IBM Store Systems: Parts Catalog , for parts information about peripheral devices.
Assembly 1: Field-replaceable units 2 5 3 10 8 9 1 4 6 7 11 Parts catalog 1 1-9-2005 4-2 SurePOS Installation and Service.
Asm– Index Part Number Units Description 1–1 45P621 1 1 LED panel –2 03R5908 1 System board (31x) –2 03R5973 1 System board (32x) –3 16K9262 1 128-MB DIMM – 45P6236 1 256-MB DIMM – 03R59.
1 1-9-2005 4-4 SurePOS Installation and Service.
Appendix A. Input/output device commands This section lists the commands and their usage. Character display (VFD) commands The integrated customer display and distributed customer display use the same command sets.
Purpose: Selects the specified character set. 00 Modified IBM code page 437 (U.S./European, power-on default) 01 Modified IBM code page 897 (Katakana) 02 Modified IBM code page 858 (Multilingual Inter.
T able A-1. User character definition: Logic Controls Emulation Mode Byte # Bit 0 1 2 3 4 5 6 7 1 P8 P7 P6 P5 P4 P3 P2 P1 2 P16 P15 P14 P13 P12 P1 1 P10 P9 3 P24 P23 P22 P21 P20 P19 P18 P17 4 P32 P31 .
T able A-3. User character definition: IBM emulation mode Byte # Bit 0 1 2 3 4 5 6 7 1 - - - P1 P2 P3 P4 P5 2 - - - P6 P7 P8 P9 P10 3 - - - P1 1 P12 P13 P14 P15 4 - - - P16 P17 P18 P19 P20 5 - - - P21.
carriage return, or display position command is written to the top line. The test and reset commands stop the scrolling message regardless of the display position. Backspace (08) <BS> 08 Purpose: Decrements the cursor position by one and clears any character displayed in that position.
line is cleared, and the cursor position is unchanged. This command always stops the scrolling alphanumeric message. Carriage return (0D) <CR> 0D Purpose: Causes the cursor to move to the leftmost position of the current line.
V ertical-scroll display control mode (12) <DC2> 12 Purpose: Sets vertical-scroll display control mode (DC2) and permits data to be written to either line. When the display position is at the last position of the top line, the cursor moves to the first position of the bottom line.
Null VFD Commands (06), (1B, 06), (07), (1B), 07) Purpose: These are null commands for both integrated and distributed display modules. They will have no effect on the operation of the display .
AP A commands This section describes the following AP A VFD commands: v Backspace without deleting v Line feed v Carriage return v T est v Clear display v Display position v Delete to end of line v Di.
Carriage return 0D Purpose: The write-in position is shifted to the most significant digit of the same row . If the write-in position is on the most significant digit, the command is ignored. T est 0F Purpose: Causes the 40 characters in the IBM code page 437 character (X'20'-X'47') set to be displayed one time.
Purpose: The displayed characters from the write-in position to the end position on the same row are erased. The write-in position is not shifted. Dimming 1B 5C 3F 4C 44 Ps Purpose: Luminance can be adjusted into six levels by using this command.
Ps Mode 6 (X'36') 5x7 dots, 4 rows (default) 7 (X'37') 5x7 dots, 5 rows 8 (X'38') 16x16 dots, 2 rows Horizontal scroll 1B 5C 3F 4C 48 Pm 3B Pl 3B Pt 3B Pn 3B Pd.
Ps Mode 0 (X'30') Reset display mode. Characters written after this command are reset to normal display mode. 5 (X'35)' Blinking mode. Characters written after this command blink ON and OFF every 0.3 seconds. 7 (X'37') Reverse mode.
available.) X'B0A0'--X'B0FF', X'B1A0'--X'C8FF' (Positions X'B100'--X'B19F' are not available.) X'CAA0'--X'CAFF', X'CBA0'--X'FDFF' (Positions X'CB00'--X'CB9F' are not available.
The format of the Horizontal Scroll Release command is as follows: 1B 5C 3F 4C 4D 45 Purpose: This command resets horizontal scroll mode. The format of the Horizontal Scroll Display Mode Set command is as follows: 1B 5C 3F 4C 4D Pm 3B Pl 3B Pt 3B Pn 3B Pd.
v When message data is changed, you must reissue this command. While scrolling, the User Definable Font Set command is not available. v Space data is written in the other rows except those selected with the Pl code.
Appendix B. Notices References in this publication to IBM products, programs, and services do not imply that IBM intends to make these available in all countries in which IBM operates. Any reference to an IBM product, program, or service is not that only IBM’s product, program, or service may be used.
Electronic emission notices Federal communications commission (FCC) statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
Dieses Gerät ist berechtigt. in Übereinstimmung mit dem Deutschen EMVG das EG-Konformitätszeichen - CE - zu führen. V erantwortlich für die Konformitätserklärung nach Paragraph 5 des EMVG ist die IBM Deutschland Informationssysteme GmbH, 70548 Stuttgart.
Korean Communications Statement Please note that this device has been approved for business purposes with regard to electromagnetic interference. If you find this is not suitable for your use, you may exchange it for a non-business purpose one.
Chinese Class A warning statement Attention: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
T rademarks The following terms are trademarks of International Business Machines Corporation in the United States, other countries, or both: IBM SurePoint IBM (logo) SurePOS PS/2 Microsoft, Windows, and Windows NT are trademarks of Microsoft Corporation in the United States, other countries, or both.
Appendix C. Safety information Danger: Before you begin to install this product, read the safety information in IBM Safety Information — Read This First , GA27-4004. This booklet describes safe procedures for cabling and plugging in electrical equipment.
Perigo: Antes de começar a instalar este produto, leia as informações de segurança contidas em Informações Sobre Seguranaça—Leia Isto Primeiro, GA27-4004. Esse folheto descreve procedimentos de segurança para a instalação de cabos e conexões em equipamentos elétricos.
V AARA Ennen kuin aloitat tämän tuotteen asennuksen, lue julkaisussa T urvaohjeet—Luetämä ensin , GA27-4004, olevat turvaohjeet. Tässä kirjasessa on ohjeet siitä, miten sähkölaitteet kaapeloidaan ja kytketään turvallisesti.
Pericolo prima di iniziare l’installazione di questo prodotto, leggere le informazioni relative alla sicurezza riportate nell’opuscolo Informazioni di sicurezza—Prime informazioni da leggere in cui sono descritte le procedure per il cablaggio ed il collegamento di apparecchiature elettriche.
V arning—livsfara Innan du börjar installera den här produkten bör du läsa säkerhetsinformationen i dikumentet Säkerhetsföreskrifter—Läs detta först, GA27-4004. Där beskrivs hur du på ett säkert sätt ansluter elektrisk utrustning. 1 1-9-2005 Appendix C.
IBM IBM GA27-4004 GA27-4004 1 1-9-2005 C-6 SurePOS Installation and Service.
GA27-4004 GA27-4004 GA27-4004 GA27-4004 GA27-4004 GA27-4004 IBM 1 1-9-2005 Appendix C. Safety information C-7.
1 1-9-2005 C-8 SurePOS Installation and Service.
Index Numerics 4810 SurePOS 300 features 1-1 summary of models and features 1-1 4910 SurePOS 300 disassembling procedures 2-1 A about this guide vii accessibility viii adapters 1-1 alphanumeric messag.
L LAN 1-1 LED assembly problems 3-1 removing 2-2 LED indicators, front view and 1-3 M manual, who should read this vii Memory 1-1 message, POST error 3-1 microphone 1-5, 1-6 models 1-1 mouse port 1-5,.
Readers’ Comments — W e’d Like to Hear from Yo u SurePOS 300 Installation and Service Guide for 4810/4910 Model 31x, 32x, W2H Publication No. GA27-4309-01 Overall, how satisfied are you with the.
Readers’ Comments — We’d Like to Hear from Yo u GA27-4309-01 GA27-4309-01 Cut or Fold Along Line Cut or Fold Along Line Fold and T ape Please do not staple Fold and T ape Fold and T ape Please do not staple Fold and T ape NO POST AGE NECESSARY IF MAILED IN THE UNITED ST A TES BUSINESS REPL Y MAIL FIRST -CLASS MAIL PERMIT NO.
.
Part Number: 03R5994 1 1-9-2005 Printed in USA GA27-4309-01 (1P) P/N: 03R5994.
Ein wichtiger Punkt beim Kauf des Geräts IBM W2H (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie IBM W2H noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für IBM W2H - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von IBM W2H reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über IBM W2H erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon IBM W2H besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von IBM W2H verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit IBM W2H. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei IBM W2H gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
