Benutzeranleitung / Produktwartung 80792 des Produzenten Husqvarna
Zur Seite of 28
Shindaiwa T rimmer Head Guide How to load and service the most popular Shindaiwa trim- mer heads, including complete replacement parts information and other important technical data.
2 Current Models Bolt Size 22F 8mm / MRH F230 8mm / MRH 22T 7mm / MLH T230, T231, C230, T2500, 65001 7mm / MLH T250, C250 8mm / MLH T260, T261, C260 8mm / MLH T270, T271, C270, T350 8mm / MLH C350, B4.
3 The most common cause of trimmer head malfunction is poor mainte- nance, especially true for tap-for-line, bump-feed, and fully automatic heads. Customers buy these heads for convenience so they don’t have to reach down and advance the line–yet that added convenience often means the head is not properly maintained.
4 NOTE: Operating with trimmer line of uneven length will cause excessive vibration. Always make sure the line is wound evenly and trimmed to equal lengths from the eyelets. 72036-15200 72005-92001 72017-92001 Shipped with 20 feet of .080 line. Maximum fill– 40 feet of .
5 7 8 9 10 11 12 Low Profile Head *2 required PA RTS LIST 1 Adapter Bolt 2 Outer Housing To advance line: With the engine off, loosen the bottom knob a few turns in the direction of rotation. Grasp the trimmer head in both hands. Rotate the bottom of the spool clockwise and pull the line through the eyelets.
6 NOTE: Operating with trimmer line of uneven length will cause excessive vibration. Always make sure the line is wound evenly and trimmed to equal lengths from the eyelets.
7 7 8 9 SemiMatic P ARTS LIST 1 Adapter Bolt 2 Outer Housing 3 Spring 4 W asher 5 Cam Assembly 6 Cam Lock 7 Inner Spool 99909-15500 Item Part No. 1 72036-15210 2 99909-15510 3 99909-15520 4 99909-15530 5 99909-15540 6 99909-15550 7 99909-15560 99909-15600 Item Part No.
8 NOTE: Operating with trimmer line of uneven length will cause excessive vibration. Always make sure the line is wound evenly and trimmed to equal lengths from the eyelets. INST ALLA TION INSTRUCTIONS E-Z Load and E-Z Pro T rimmer Heads 1 2 3 4 5 6 E-Z Load E-Z Pro Line Chart Press the upper body in at the spots marked “Push Open”.
9 Check for a maximum line overlap of one to two inches (four to five inches of line extending from each eyelet). T rim as required to final length. 7 8 9 10 11 12 E-Z Load *2 required PA RTS LIST 1 O.
10 NOTE: Operating with trimmer line of uneven length will cause excessive vibration. Always make sure the line is wound evenly and trimmed to equal lengths from the eyelets.
11 7 8 9 10 11 12 High Capacity *2 required PA RTS LIST 1 Adapter Bolt 2 Outer Housing 3 Eyelets 4 Inner Spool 5 Retaining Ring 6 Outer Cover 7 Spring Replace the cover . T ighten the lower knob by turning counterclockwise. Pull the line ends free from the line saver slots.
12 NOTE: Operating with trimmer line of uneven length will cause excessive vibration. Always make sure the line is wound evenly and trimmed to equal lengths from the eyelets.
13 7 8 9 10 11 12 PA RTS LIST To advance line: With the engine off, loosen the wing nut a few turns in the direction of rotation. Grasp the trimmer head with both hands. Rotate the bottom of the spool clockwise and pull the line through the eyelets. Re-tighten the wing nut before operating the trimmer .
14 NOTE: Operating with trimmer line of uneven length will cause excessive vibration. Always make sure the line is wound evenly and trimmed to equal lengths from the eyelets. UN34-8R Shipped with 21 feet of .080 line. Maximum fill– 33 feet of .080 16 feet of .
15 Lock the ends of line into line saver slots in spool. Insert the spring onto the bolt. With the line saver slots on the spool facing the bolt, thread the ends of the line into the eyelets in the housing. Do not allow the line to go under the spool.
16.
17.
18.
19.
20 UN10 Assembly and Rewinding Instructions A B C A . 7mm LH (gold p/n 80676) (Fits 22T, 22C, T230, T231, C230, T2500, T2500X, 65001 multipurpose tool) B . 8mm LH (silver p/n 80677) (Fits T260, T261, C260, T270, T272X, C270, T350) C . 10mm LH (silver p/n 80678) (Fits C350, B450, B530) NOTE: Each package contains (3) steel studs.
21 UN30 Assembly and Rewinding Instructions A B C A . 7mm LH (gold p/n 80676) (Fits 22T, 22C, T230, T231, C230, T2500, T2500X, 65001 multipurpose tool) B . 8mm LH (silver p/n 80677) (Fits T260, T261, C260, T270, T272X, C270, T350) C . 10mm LH (silver p/n 80678) (Fits C350, B450, B530) NOTE: Each package contains (3) steel studs.
22 UN32 Assembly and Rewinding Instructions A B C A . 7mm LH (gold p/n 80676) (Fits 22T, 22C, T230, T231, C230, T2500, T2500X, 65001 multipurpose tool) B . 8mm LH (silver p/n 80677) (Fits T260, T261, C260, T270, T272X, C270, T350) C . 10mm LH (silver p/n 80678) (Fits C350, B450, B530) NOTE: Each package contains (3) steel studs.
23 INST ALLA TION INSTRUCTIONS Flail T rimmer Heads If the machine is equipped with a trimmer line head (T18/T230 models), unscrew the head (turn clockwise to remove) and remove all adapters. Replace the spacer and install all parts as shown above. T ighten the arbor bolt securely .
24 Model View 1 2 INST ALLA TION INSTRUCTIONS Super Flail T rimmer Heads The three-blade super flail head is a perfect attachment for trimming grass, vegetation, and light brush. The nylon blades are supported by a metal bearing surface for superior perfor- mance and durability .
25 INST ALLA TION INSTRUCTIONS Fixed Line T rimmer Heads T18, T230/C230 Item Part No. Spacer 22035-13230 Holder A 22035-13242 Bolt Guard 22035-13290 Arbor Bolt 22035-13271 T250/C250, T260/C260 Item Part No. Holder A 22024-13912 Bolt Guard 22024-13291 Arbor Bolt 22000-13512 T270/C270 Item Part No.
26 INST ALLA TION INSTRUCTIONS Shindaiwa Heavy-duty Fixed-line Head The Shindaiwa Heavy-duty Fixed-line Head package* (p/n 80410) comes complete with the necessary hardware to fit all Shin- daiwa straight shaft grass trimmers and brushcutters. *Package containing Fixed-line Trimmer Head, (2) arbor bolts and spacer washer.
27 How to Fit a Shindaiwa T rimmer Head Onto Other Brand Grass T rimmers. Shindaiwa offers adapter kits that let you install Shindaiwa trimmer heads onto virtually every grass trimmer model on the market. Find your machine on the following chart to identify the kit you need.
28 Shindaiwa Inc. 1 1975 SW Herman Road T ualatin, OR 97062 Phone 503 692-3070 FA X 503 692-6696 www .shindaiwa.com Printed in U.S.A. Item 80792 6/03 Specifications subject to change without notice.
Ein wichtiger Punkt beim Kauf des Geräts Husqvarna 80792 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Husqvarna 80792 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Husqvarna 80792 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Husqvarna 80792 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Husqvarna 80792 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Husqvarna 80792 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Husqvarna 80792 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Husqvarna 80792. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Husqvarna 80792 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
