Benutzeranleitung / Produktwartung 1151438-95 des Produzenten Husqvarna
Zur Seite of 44
E E E E n n n n g g g g l l l l i i i i s s s s h h h h 345e EP A III 346XP EP A I 353 EP A III T rioBr ak e Oper ator’ s manual Please r ead the operator’ s manual carefully and mak e sure you understand the instructions bef ore using the machine.
KEY T O SYMBOLS 2 – English Symbols on the mac hine: W ARNING! Chain saws can be dangerous! Careless or improper use can result in ser ious or f atal injury to the operator or others. Please read the operator’ s manual carefully and make sure y ou understand the instructions before using the machine.
KEY T O SYMBOLS English – 3 Y ou will find the following labels on y our chain saw: EP A I EP A III The Emissions Compliance P eriod referred to on the Emission Compliance label indicates the n umber of oper ating hours f or which the engine has been shown to meet Feder al emissions requirements.
CONTENTS 4 – English Contents KEY T O SYMBOLS Symbols on the machine: ......................................... 2 Symbols in the operator’ s manual: ........................... 2 CONTENTS Contents ..................................................
English – 5 INTR ODUCTION Dear customer! Cong ratulations on your choice to b uy a Husqvarna product! Husqvarna is based on a tradition that dates bac k to 1689, when the Swedish King Kar l XI ordered the construction of a factory on the banks of the Huskvarna River , for production of m uskets.
6 – English WHA T IS WHA T? What is what on the c hain saw? 1 Product and serial number plate 2 Throttle lock out 3 Decompression valv e 4 F ront handle 5 Cylinder cov er 6 F ront hand guard 7 Muf.
GENERAL SAFETY PRECA UTIONS English – 7 Bef ore using a new c hain saw • Please read this manual carefully . • Check that the cutting equipment is correctly fitted and adjusted. See instr uctions under the heading Assembly . • Refuel and star t the chain saw .
GENERAL SAFETY PRECA UTIONS 8 – English your library can provide inf ormation about which training materials and courses are availab le. Work is constantly in progress to impro ve the design and technology - improv ements that increase your saf ety and efficiency .
GENERAL SAFETY PRECA UTIONS English – 9 • The brake is applied when the front hand guard (B) is pushed forw ards or when the r ight-hand brake trigger (E) is pushed up and forw ards. • This mov ement activates a spring-loaded mechanism that tightens the br ak e band (C) around the engine driv e system (D) (clutch drum).
GENERAL SAFETY PRECA UTIONS 10 – English Will m y hand alwa ys activate the c hain brake during a kickbac k? No . It takes a cer tain force to mo v e the hand guard forward. If your hand only lightly touches the front guard or slips ov er it, the force ma y not be enough to trigger the chain brake.
GENERAL SAFETY PRECA UTIONS English – 11 cutting equipment that is b lunt or f aulty (wrong type or badly sharpened) will increase the vibration level. Stop switc h Use the stop s witch to switch off the engine . Muffler The muffler is designed to keep noise le vels to a minimum and to direct exhaust fumes a way from the user .
GENERAL SAFETY PRECA UTIONS 12 – English Cutting equipment designed to reduce kickbac k The only wa y to avoid kickbac k is to make sure that the kickbac k zone of the bar ne ver touches an ything.
GENERAL SAFETY PRECA UTIONS English – 13 • The cutting par t of the chain is called the cutter and consists of a cutting tooth (A) and the depth gauge (B). The cutters cutting depth is determined by the difference in height between the two (depth gauge setting).
GENERAL SAFETY PRECA UTIONS 14 – English Adjustment of depth gauge setting • The cutting teeth should be newly sharpened before adjusting the depth gauge setting. W e recommend that you adjust the depth gauge setting e ver y third time you sharpen the cutting teeth.
GENERAL SAFETY PRECA UTIONS English – 15 • Adjust the tension on the chain by turning the wheel down (+) f or tighter tension and up (-) to loosen the tension. • Tighten the bar clutch by turning the knob clockwise. • Fold the knob bac k in to lock the tensioning.
GENERAL SAFETY PRECA UTIONS 16 – English • Check that the bar tip sproc ket turns freely and that the lubricating hole in the tip sprocket is not b lock ed.
ASSEMBL Y English – 17 Fitting the bar and chain 346XP T rioBrake, 353 T rioBrake Check that the chain brak e is in disengaged position by moving the front hand guard tow ards the front handle. Remov e the bar nuts and remov e the clutch cov er (chain br ak e).
ASSEMBL Y 18 – English Fit the bar ov er the bar bolts. Place the bar in its rearmost position. Place the chain over the drive sproc ket locate it in the groov e on the bar. Begin on the top edge of the bar . Make sure that the edges of the cutting links are f acing f orw ard on the top edge of the bar .
FUEL HANDLING English – 19 Fuel Note! The machine is equipped with a two-stroke engine and must alwa ys be r un using a mixture of gasoline and two- stroke oil. It is impor tant to accurately measure the amount of oil to be mixed to ensure that the correct mixture is obtained.
FUEL HANDLING 20 – English • Contact your service agent when choosing chain oil. Fueling Clean the area around the fuel cap . Clean the fuel and chain oil tanks regularly . The fuel filter must be replaced at least once a year . Contamination in the tanks causes malfunction.
ST ARTING AND ST OPPING English – 21 Starting and stopping Cold engine Starting: The chain brake should be activated when starting the chain saw . Activate the chain brake b y pushing the front hand guard forw ards. Ignition; choke: Set the chok e control in the choke position.
ST ARTING AND ST OPPING 22 – English latch in order to av oid unnecesser y wear on the clutch assembly . Note! Pull the front hand guard towards the front handle . The chain br ak e is no w disengaged. Y our saw is ready f or use. • Nev er star t a chain saw unless the bar , chain and all cov ers are fitted correctly .
WORKING TECHNIQUES English – 23 Bef ore use: 1 Check that the chain brak e wor ks correctly and is not damaged. 2 Check that the rear right hand guard is not damaged. 3 Check that the throttle loc kout w orks correctly and is not damaged. 4 Check that the stop s witch wor ks correctly and is not damaged.
W ORKING TECHNIQUES 24 – English 6 Before mo ving y our chain sa w switch off the engine and lock the chain using the chain brak e. Carry the chain saw with the bar and chain pointing backwards . Fit a guard to the bar before tr anspor ting the chain saw or carrying it for any distance.
WORKING TECHNIQUES English – 25 Cutting with the bottom edge of the bar , i.e. from the top of the object downwards , is known as cutting with a pulling chain. In this case the chain saw pulls itself towards the tree and the front edge of the chain sa w body rests naturally on the trunk when cutting.
W ORKING TECHNIQUES 26 – English Cutting If you ha v e a pile of logs, each log y ou attempt to cut should be remov ed from the pile, placed on a sa w horse or runners and cut individually .
WORKING TECHNIQUES English – 27 T ree felling technique Safe distance The safe distance betw een a tree that is to be felled and anyone else w orking nearby is at least 2 1/2 tree lengths. Make sure that no-one else is in this ”risk zone” before or during felling.
W ORKING TECHNIQUES 28 – English Felling Felling is done using three cuts . First you make the directional cuts, which consist of the top cut and the bottom cut, then you finish with the f elling cut. By placing these cuts correctly you can control the f elling direction v ery accurately .
WORKING TECHNIQUES English – 29 We recommend that y ou use a bar that is longer than the diameter of the tree, so that you can mak e the felling cut and directional cuts with single cutting strokes. See instr uctions under the heading T echnical data section to find out which lengths of bar are recommended for y our saw .
W ORKING TECHNIQUES 30 – English Ho w to a v oid kic kback What is kic kback? The word kickbac k is used to descr ibe the sudden reaction that causes the chain saw and bar to jump off an object when the upper quadrant of the tip of the bar , known as the kickbac k zone, touches an object.
MAINTENANCE English – 31 General The user must only carry out the maintenance and ser vice work described in this manual. Carburetor adjustment Due to existing en vironmental and emissions legislation your chain saw is equipped with mov ement limiters on the carburetor adjuster scre ws.
MAINTENANCE 32 – English High speed jet H At the factory the engine is adjusted at sea level. When working at a high altitude or in different weather conditions, temperatures and atmospheric humidity , it may be necessary to make minor adjustments to the high speed jet.
MAINTENANCE English – 33 Checking the right-hand brake trigger Check that the right hand guard is not damaged and that there are no visible def ects, such as cracks. Push the trigger up and forwards to chec k that it moves freely and is securely hinged to the clutch cov er .
MAINTENANCE 34 – English Right hand guar d Check that the right hand guard is not damaged and that there are no visible def ects, such as cracks. Vibration damping system Regularly check the vibration damping units f or crac ks or deformation. Make sure the vibration damping units are securely attached to the engine unit and handle unit.
MAINTENANCE English – 35 Starter Changing a br oken or worn starter cord • Loosen the screws that hold the starter against the crankcase and remov e the star ter . • Pull out the cord approx. 30 cm (12 inches) and hook it into the notch in the r im of the pulle y .
MAINTENANCE 36 – English Replacement of br oken recoil and drive disc springs Recoil spring (A) • Lift up the star ter pulley . See instr uctions under the heading Changing a broken or worn starter cord. Remember that the recoil spring is coiled under tension in the star ter housing.
MAINTENANCE English – 37 should be replaced after about a month in oper ation or earlier if necessar y . Note! Alwa ys use the recommended spark plug type! Use of the wrong spark plug can damage the piston/cylinder. Chec k that the spark plug is fitted with a suppressor.
MAINTENANCE 38 – English ”Air Injection” centrifugal cleaning Centrifugal cleaning means the following: All air to the carburetor passes through the starter. Dir t and dust is pushed out by the cooling f an. IMPORT ANT! In order to maintain oper ation of the centrifugal cleaning system it m ust be regularly maintained.
English – 39 MAINTENANCE Maintenance schedule The follo wing is a list of the maintenance that must be perf ormed on the machine. Most of the items are descr ibed in the Maintenance section. Daily maintenance Weekl y maintenance Monthly maintenance Clean the outside of the machine.
40 – English TECHNICAL D A T A T echnical data 345e T rioBrake 346XP T rioBrake 353 T rioBrake Engine Cylinder displacement, cu.in/cm 3 2,75/45,0 3,06/50,1 3,15/51,7 Cylinder bore, inch/mm 1,65/42 1.
English – 41 TECHNICAL D A T A Recommended original and replacement bar and c hain combinations F ollo wing is a list of recommended cutting equipment f or the Husqvarna chain saw models 345e T rioBrak e , 346XP T rioBrake and 353 T rioBrake.
´®z+RxQ¶5 ´®z+RxQ¶5 42 – English FEDERAL EMISSION CONTR OL W ARRANTY ST A TEMENT Y OUR W ARRANTY RIGHTS AND OBLIGA TIONS The EP A (The US Environmental Protection Agency), Environment Canada and Husqv arna Forest & Garden are pleased to explain the emissions control system w arranty on your 2009 and later small nonroad engine.
AMERICAN ST AND ARD SAFETY PRECA UTIONS English – 43 Saf ety precautions f or chain sa w users (ANSI B 175.1-2000 Anne x C) Kickbac k safety precautions With a basic understanding of kic kback, y ou can reduce or eliminate the element of surpr ise. Sudden sur prise contributes to accidents.
1151438-95 ´®z+SKy¶5n¨ ´®z+SKy¶5n¨ 2009-01-21.
Ein wichtiger Punkt beim Kauf des Geräts Husqvarna 1151438-95 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Husqvarna 1151438-95 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Husqvarna 1151438-95 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Husqvarna 1151438-95 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Husqvarna 1151438-95 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Husqvarna 1151438-95 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Husqvarna 1151438-95 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Husqvarna 1151438-95. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Husqvarna 1151438-95 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
