Benutzeranleitung / Produktwartung Fan des Produzenten Hunter
Zur Seite of 28
1 41343-01 6/12/2002 ® 41343-01 7/1/2002 Installation and Operation Manual For Hunter Ceiling Fans 41343-01 7/1/2002.
2 ® 41343-01 7/1/2002.
3 41343-01 6/12/2002 ® 41343-01 7/1/2002 CONGRA TULA TIONS! Y our new Hunter ceiling fan is an addition to your home or office that will provide comfort and perfor - mance for many years. This manual gives you complete instructions for installing and operating your fan.
4 ® 41343-01 7/1/2002 CONTENTS IMPORT ANT INFORMA TION ................................................................................................................................. 5 STEP 1 - GETTING READY ........................................
5 41343-01 6/12/2002 ® 41343-01 7/1/2002 IMPOR T ANT INFORMA TION not lock the circuit break- ers in the off position, se- curely fasten a prominent warning device, such as a tag, to the service panel. • All wiring must be in ac- cordance with national and local electrical codes and ANSI/NFP A 70.
6 ® 41343-01 7/1/2002 GA THERING THE TOOLS Y ou will need the following tools for installing the fan: • Electric drill with 9/64" bit • Standar d scr ewdriver • Phillips-head screwdriver • Wr ench or pliers OPTIONAL ACCESSORIES Consider using Hunter’ s optional accesso- ries, including a wall-mounted or remote speed control.
7 41343-01 6/12/2002 ® 41343-01 7/1/2002 INST ALLER’S CHOICE ® This patented 3-position mounting system provides you maximum instal- lation flexibility and ease. Y ou can install your Hunter fan in one of three ways. The steps in this manual in- clude specific instructions for the fan mounting method of your choice.
8 ® 41343-01 7/1/2002 STEP 2 - INST ALLING THE CEILING PLA TE 4. Align the slotted holes in the ceil- ing plate with the pilot holes in the wood support structure. Note: The isolation pads should be flush against the ceiling. 1. Drill two pilot holes into the wood support structur e through the outermost holes on the outlet box.
9 41343-01 6/12/2002 ® 41343-01 7/1/2002 Figure 2c - Attaching Ceiling Plate to 2 x 4 Brace 2 x 4 Brace Ceiling Joist Ceiling Outlet Box Ceiling Plate Flat Washer 3" W ood Screw 5. Place a flat washer on each of the two 3" scr ews and pass the screws thr ough the slotted holes in the ceiling plate as shown in Figure 2c.
10 ® 41343-01 7/1/2002 STEP 3 - ASSEMBLING THE F AN Use the Step 3 instructions for the type of mounting you have selected: standard, angle, or flush. ST ANDARD AND ANGLE MOUNTING For Standard 8-foot Ceilings and Higher 1 . Insert the pipe through the canopy as shown in Figure 3a.
11 41343-01 6/12/2002 ® 41343-01 7/1/2002 Assembly Washer Adapter Threaded Hole Figure 3d - Attaching Canopy to Fan Assembly Figure 3c - Positioning Assembly Washer Slots over Threaded Holes 3. Position the slots in the assem- bly washer over the threaded holes in the adapter as shown in Figure 3c.
12 ® 41343-01 7/1/2002 STEP 4 - WIRING THE F AN 1. Disconnect the power by turning off the cir cuit breakers to the out- let box and associated wall switch location. 2. T ilt and hang the assembled fan from the ceiling plate hooks. Slip two rectangular canopy slots over ceiling plate hooks as shown in Figures 4a and 4b.
13 41343-01 6/12/2002 ® 41343-01 7/1/2002 Bare or Green Green Approved Connectors Power Wires In Ceiling White White Black Black/White 1 2 Connections: Black Wall Switch Wire For Separate Control of .
14 ® 41343-01 7/1/2002 STEP 5 - HANGING THE F AN Figure 5a - Attaching Canopy to Ceiling Plate Figure 5b - Canopy T abs and Gr ooves in Hanger Ball Sub-steps 1 and 2 apply to Flush, Stan- dard, and Angle mounting. Sub-step 3 applies to Standard and Angle mounting only .
15 41343-01 6/12/2002 ® 41343-01 7/1/2002 Figure 6a - Inserting Grommet into Fan Blade Figure 6b - Attaching Fan Blade to Blade Iron Figure 6c - Attaching Fan Blade to Blade Iron using Decorative Medallion well as a blade iron.
16 ® 41343-01 7/1/2002 4. For each blade, insert one blade mounting screw through the blade iron as shown in Figure 6d, and attach lightly to the fan.
17 41343-01 6/12/2002 ® 41343-01 7/1/2002 STEP 7 - ATT ACHING THE SWITCH HOUSING Figure 7a - Attaching Upper Switch Housing to Switch Housing Mounting Plate Housing Assembly Screw Switch Housing Moun.
18 ® 41343-01 7/1/2002 T able 7-1 Fan with no light fixture included See Figure 7c Fan with single- globe light fixture See Figure 7c included Fan with multi- light light fixture See Figure 7d includ.
19 41343-01 6/12/2002 ® 41343-01 7/1/2002 If your fan has a lower switch hous- ing as shown in Figure 7c and you ARE NOT installing a light fixture, or if your fan has a lower switch hous- ing as shown in Figure 7d or 7f, com- plete the following steps: 1.
20 ® 41343-01 7/1/2002 STEP 8 - INST ALLING LIGHT FIXTURE Figure 8a - Removing Plug Button and Switch Housing Cap Lower Switch Housing Plug Button Y our fan may include a light fixture. Information for wiring and installing all included Hunter light fixtures fol- lows.
21 41343-01 6/12/2002 ® 41343-01 7/1/2002 INST ALLING INCLUDED SINGLE- GLOBE LIGHT FIXTURE 1. Remove the plug cap fr om the lower switch housing. Note: Do not discard the plug cap. Y ou will need this if you remove the light fixture in the future. 2.
22 ® 41343-01 7/1/2002 Figure 8d - Multi-Light Fixture Cup Globe Silencer Band Thumb- screw 7. Connect the upper plug connec- tor fr om the motor to the lower plug connector in the lower switch housing assembly . See Fig- ure 7f. Note: Both plug connectors are polarized and will only fit together one way .
23 41343-01 6/12/2002 ® 41343-01 7/1/2002 Figure 8f - Attaching Fan Switch Pull Chain Extension (Aurora/Tiffany) AURORA AND TIFFANY LIGHT FIXTURES Thread the fan switch pull chain through the gr ommetted hole in the light fixtur e bracket.
24 ® 41343-01 7/1/2002 INST ALLING ACCESSOR Y LIGHT KITS T o install the light kit, follow the in- structions included with the kit for wiring, mounting, and assembly . Af- ter completing the light kit installa- tion, follow sub-steps 1 and 2 on page 19 to reattach the lower switch housing.
25 41343-01 6/12/2002 ® 41343-01 7/1/2002 dir ect breeze. In winter , having the fan draw air upwar d (clock- wise blade r otation) will distrib- ute the warmer air trapped at the ceiling ar ound the room without causing a draft. OPERA TING YOUR HUNTER F AN 1.
26 ® 41343-01 7/1/2002 CLEANING AND MAINTENANCE Caring for blades: Wood finish blades should be cleaned with a fur - niture polishing cloth. Occasionally , a light coat of furniture polish may be applied for added protection and beauty . Painted and high-gloss blades may be cleaned in the same manner as the fan finish.
27 41343-01 6/12/2002 ® 41343-01 7/1/2002 TROUBLESHOOTING Nothing happens; fan does not move. Noisy operation. 1. Power tur ned off, fuse blown, or circuit br eaker tripped. 2 . Loose wire connections or wrong connections. 3. Motor reversing switch not en- gaged.
28 ® 41343-01 7/1/2002 PROBLEM PROBABLE CAUSE SOLUTION Noisy operation (continued). Excessive wobbling. Note: When switching from medium to low speed, you may notice some fan wobble. When the fan stabilizes at low speed, wobble will disappear . 4. Using non-approved speed contr ol.
Ein wichtiger Punkt beim Kauf des Geräts Hunter Fan (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Hunter Fan noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Hunter Fan - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Hunter Fan reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Hunter Fan erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Hunter Fan besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Hunter Fan verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Hunter Fan. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Hunter Fan gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
