Benutzeranleitung / Produktwartung HERA100 des Produzenten HTC
Zur Seite of 214
www.htc.c om P ock et PC Phone User Manual.
2 Please Read Before P roceeding THE BA TTERY IS NOT CHARGED WHEN Y OU T AKE IT OUT OF THE BO X. DO NOT REMO VE THE BA TTERY P ACK WHEN THE DEVICE IS CHARGING. Y OUR W ARRANT Y IS INV ALID A TED IF Y OU OPEN OR T AMPER WITH THE DEVICE’S OUTER CASING.
3 Macromedia, Flash, Macromedia F lash, Macromedia Flash Lit e and Reader are trademarks and/or regist ered trademarks of Macromedia Netherlands, B.V . or Adobe Systems Incorporated. Copyright © 2006, JA T AA YU SOFT W ARE (P) L TD . All Rights Reserved.
4 Impor tant Health Informa tion and Safety Precautions When using this product, the safety precautions below must be taken to avoid possible legal liabilities and damages. Retain and follow all product safety and operating instructions. Observe all warnings in the operating instructions on the product.
5 • Handle battery packs carefully This product contains a Li-ion P olymer battery. There is a risk of fire and burns if the battery pack is handled improperly.
6 SAFETY IN AIRCRAFTS Due to the possible interference caused by this pr oduct to an aircraft’ s navigation system and its communica tions network, using this device’ s phone function on board an airplane is against the law in most countries.
7 SAFETY PRECAUTIONS FOR RF EXPOSURE • A void using your device near metal structures (f or example, the steel frame of a building). • A void using your device near str ong electromagnetic sources, such as microwav e ovens, sound speakers , TV and radio.
8 GENERAL PRECAUTIONS • Heed service markings Except as explained elsewhere in the Oper ating or Service documentation, do not service any product yourself . Service needed on components inside these compartments should be done by an authorized service technician or provider .
9 • Av oid pushing objects into product Never push objects of any kind into cabinet slots or other openings in the product. Slots and openings are provided f or ventilation. These openings must not be blocked or cover ed. • Mounting Acc essories Do not use the product on an unstable table, cart, stand, tripod, or bracket.
10 C ont en ts Chapter 1 Getting Star ted 15 1.1 Getting to Know Y our Device and Its Ac cessories .......... 16 1.2 About the SIM Card and Ba ttery ..................................... 21 1.3 Starting Up .............................................
11 Chapter 3 Using Phone F eatures 43 3.1 Using the Phone ............................................................... 44 3.2 Making a Call .................................................................... 46 3.3 Receiving a Call ...............
12 Chapter 6 Getting Connected 89 6.1 Connecting to the Internet .............................................. 90 6.2 Internet Explorer Mobile ................................................. 93 6.3 Using C omm Manager ..............................
13 Chapter 8 Experiencing Multimedia 149 8.1 Using Camer a .................................................................. 150 8.2 Using Pictures & Videos ................................................. 163 8.3 Using Windows Media Pla yer Mobile .
14.
Chapter 1 Getting Star ted 1.1 Getting to Know Y our Device and Its Acc essories 1.2 About the SIM Car d and Battery 1.3 Starting Up 1.4 The T oday Screen 1.
16 Getting Started 1.1 Getting to Know Y our Device and Its Acc essories 1 2 3 4 5 14 6 7 8 9 10 11 12 13 15 17 18 16.
Getting Started 17 No. Item Function 1 POWER Button Press and hold to turn on the device . When the device is turned on, press to turn off the display temporarily . This switches your devic e to Sleep mode, and you can still r eceive calls and messages.
18 Getting Started 19 20 22 24 25 26 27 28 23 21.
Getting Started 19 No. Item Function 19 Car A ntenna Connector Connect your phone to the car antenna while in a car to ha ve better reception quality . Simply peel off the rubber cap and connect the antenna jack. Replace the rubber cap if unused. 20 Back C over This covers the battery and SIM card compartment.
20 Getting Started Ac cessories 2 1 3 4 No. A ccessory Function 1 AC adapter Recharges the battery. 2 USB Sync cable Connects your device to a PC and synchroniz es data.
Getting Started 21 1.2 About the SIM Car d and Battery Always turn off your device bef ore installing/replacing the batt ery and SIM card. F ollow the instructions in the Quick Start Guide to install a SIM (Subscriber Identity Module) card provided by your local network service provider and to install the batt ery.
22 Getting Started T o check the battery power Do one of the following: • T ap the battery level icon ( ) on the T oday screen. • Alternatively , tap Star t > Settings > Systems tab > P ow er . Battery power information Charge the battery New batteries are shipped partially charged.
Getting Started 23 1.3 Starting Up T urn your device on and off T o turn on your device, press and hold the POWER button. When you turn on your device for the first time , a Quick Start W izard will g.
24 Getting Started Calibra te the device Calibrating the device scr een involves tapping the c enter of a cross with the stylus as the cross moves around the scr een. This process ensur es that when you tap the screen with your stylus , the tapped item is activated.
Getting Started 25 1.4 The T oday Screen The T oday screen displays important information, such as upcoming appointments and status indicators . Y ou can tap a section on the screen to open the associated program. • T o access the T oday screen, tap Start > T oda y .
26 Getting Started Indicators The following ar e some of the status icons that you ma y see on the device. Icon Description New e-mail or text messages; SMS notification of voice mail. New multimedia (MMS) message. New MSN message. There are mor e notifications.
Getting Started 27 Icon Description Synchronization in prog ress. ActiveSync notification. Synchronization error . Wi-F i function enabled, but device not connected to a wireless network yet. Wireless network(s) detected. Connecting to wireless network (arrows mo ving); connected to wireless network.
28 Getting Started The Start menu The Start menu, located at the top left corner of the T oday screen, displays a list of programs . Y ou can start a program by scrolling through the prog rams list and then pressing ENTER, or by tapping a prog ram with the stylus.
Getting Started 29 Icon Description Calendar Allows you t o keep track of your appointments and creat e meeting requests. Camera Snaps photos or shoots video clips with acc ompanying audio. Contacts Allows you t o keep track of your friends and colleagues.
30 Getting Started Icon Description Pock et MSN Lets you send and rec eive instant messages with your MSN Messenger contacts, as well as access your Hotmail ac count, if you hav e one. Pow erPoin t Mobile Lets you view P owerP oint slides and presentations .
Getting Started 31 Icon Description Windo ws Media Play er Mobile Lets you play back audio and video files . W ord Mobile Lets you cr eate, view , and edit W ord documents. ZIP Enables you to save memory and free up storage spac e on your device by compressing files in the con ventional ZIP format.
32 Getting Started Icon Description Phone Allows you to customiz e phone settings such as ring tone, set a PIN number for your SIM card , and more. Sounds & Notifications Enables sounds for events, notifica tions, and more, and allows y ou to set the type of notification for differ ent events.
Getting Started 33 Icon Description Memory Shows the device memory allocation status and memor y card information. Also allows y ou to stop currently running progr ams. Microphone AGC A djusts the volume of your voice aut omatically when you are rec ording.
34 Getting Started Icon Description GPRS Setting Sets the GPRS authentication method. Consult your wireless service provider first before chang ing this setting. SMS Service Enables sending of SMS text messages via a data connection, such as GPRS or a circuit-switched connection.
Chapter 2 Entering and Searching Informa tion 2.1 Using the Har dware K eyboard 2.2 Entering Inf ormation 2.3 Using the On-screen K eyboar d 2.4 Using L etter Recogniz er 2.5 Using Block Rec ognizer 2.6 Using T ranscriber 2.7 Using S ymbol P ad 2.8 Using Notes t o Draw , Write and Record V oice Notes 2.
36 Entering and Searching Information 2.1 Using the Hardw are K eyboard Y our device provides you with a QWERTY keyboar d, which is similar to a standard keyboard on your PC. T o use the QWERTY keyboard, slide the screen panel to the left to reveal the keyboar d.
Entering and Searching Information 37 2.2 Entering Inf ormation When you start a program or select a field that requires text or numbers, the Input Panel icon becomes a vailable on the menu bar .
38 Entering and Searching Information 2.3 Using the On-screen K eyboar d The on-screen K eyboard is available when text entry is possible. Y ou can enter text by tapping keys on the keyboard that ar e displayed on the scr een. T o enter text using the on-screen K eyboard 1.
Entering and Searching Information 39 2.5 Using Block Rec ognizer With Block Recogniz er , you use a single stroke to write lett ers, numbers, symbols, and punctuation, which are then conv erted into typed text. T o use Block Recognizer 1. Fr om a program, tap the Input Selector arrow , and tap Block Recognizer .
40 Entering and Searching Information T o write using T ranscriber 1. In a program, position the cursor where you w ant text to appear . 2. Use the stylus to write anywhere on the screen. The handwriting will be converted to text shortly after you lift the stylus from the screen.
Entering and Searching Information 41 2.7 Using S ymbol P ad Symbol P ad provides a comprehensiv e list of common symbols such as parentheses, brac es, currency signs, and more , as well as punctuation marks and special characters. T ap a symbol to selec t it.
42 Entering and Searching Information 2.8 Using Notes to Dr aw , Write and Rec ord V oice Not es Using Notes , you can dra w directly on the screen, or write on the screen and save notes in y our own handwriting. Y ou can also creat e a stand-alone recording (v oice note) or you can add a r ecording to a note .
Chapter 3 Using Phone F eatur es 3.1 Using the Phone 3.2 Making a Call 3.3 Receiving a C all 3.4 Smar t Dialing 3.5 In-call O ptions 3.6 Additional Dialing Informa tion.
44 Using Phone F eatures 3.1 Using the Phone Like a standard mobile phone, y ou can use your device to make, r eceive , and keep track of calls and send SMS/MMS messages. Y ou can also dial directly from Contacts, and easily cop y phonebook entries from your SIM card to Contacts on your devic e.
Using Phone F eatures 45 T urn the phone func tion on and off In many countries, you ar e required by la w to turn off your phone while on board an aircraft.
46 Using Phone F eatures Notes • T o adjust the conversation phone volume, y ou must do it during a call. Adjusting the volume at another time will aff ect the ring, notification, and MP3 sound levels. • When you activate Vibra te mode, sound will automatically be muted and your device will vibrate when an inc oming call is received.
Using Phone F eatures 47 Make a call from C ontacts T ap Contacts on the T oday screen or tap S tart > Contacts , then do one of the following: • Press NA VIGA TION up or down to select a contact, and press T ALK twice (once to send the number to the Phone keypad, and onc e to dial the number).
48 Using Phone F eatures T o create a Speed Dial entry 1. On the Phone screen, tap Speed Dial . 2. T ap Menu > New. 3. T ap a contact. S elect the phone number that you want to add to Speed Dial. 4. In the Location box, select an available location f or the new Speed Dial entry.
Using Phone F eatures 49 3.3 Receiving a Call When you receiv e a phone call, a message will appear , giving you the option to either answer or ignor e the incoming call. T o answer or reject an incoming call • T o answer the call, tap Answer , or pr ess T ALK on the device.
50 Using Phone F eatures Note When you use the hardwar e keyboard to dial a number , the digits entered will be displayed on the right side of the entry box and the equivalent letters will appear on the left side. Whereas tapping the Phone keypad will display only the digits in the entry box.
Using Phone F eatures 51 Make a call or send a te xt message using Smar t Dialing 1. Begin entering the first few numbers or characters. 2. In the Smar t Dialing panel, brow se the list by tapping the arrows ( / ) or pressing NA VIGA TION up or down to select the desired contact or phone number .
52 Using Phone F eatures Set up Smar t Dialing 1. On the Phone screen, tap Menu > Smart Dialing Options . 2. On the Options tab, select the Enable Smart Dialing check box.
Using Phone F eatures 53 T o set up a conferenc e call 1. Either put a call on hold, and dial a second number; or , accept a second incoming call when you alr eady have one in progr ess. 2. T ap Conference . Note Not all service providers support conference calling.
54 Using Phone F eatures 3.6 Additional Dialing Informa tion Make an emergency call • Enter the international emergency number for y our locale, and tap T alk . Tip Additional emergency numbers may be included in your SIM card . Contact your service provider for details.
Chapter 4 S ynchronizing Inf ormation and Setting Up E-mail S ecurity 4.1 Setting Up ActiveS ync 4.2 Synchr onizing Information 4.3 Synchr onizing via Bluetooth 4.
56 Synchronizing Information and Setting Up E-mail Security 4.1 Setting Up ActiveS ync Microsoft ActiveSync synchroniz es information on your device with information on your PC, such as Outlook con tent.
Synchronizing Information and Setting Up E-mail Security 5 7 5. On the Exchange server credentials screen, ent er the Exchange server address, your user name and passw ord, and the domain name .
58 Synchronizing Information and Setting Up E-mail Security f . In the System Properties dialog box, click the Computer Name tab. Y ou will then see the domain name. 6. On your device, y ou also need to enter the Ex change server settings. For information about this, see “Synchronize Outlook information with Exchange Server .
Synchronizing Information and Setting Up E-mail Security 5 9 Information types on the PC and Exchange Server 9. Click Next . 10. Click Finish . When you finish the wizard , ActiveSync synchroniz es your device automatically . Once synchroniza tion completes, you can disc onnect your device from your PC.
60 Synchronizing Information and Setting Up E-mail Security 4.2 Synchr onizing Information When you connect your device to the PC using a USB cable or a Bluet ooth connection, ActiveSync will immediately synchroniz e. While your devic e is connected, ActiveSync synchr onizes every time you make a change on either the PC or your device.
Synchronizing Information and Setting Up E-mail Security 6 1 Y ou can also set up your device to synchronize with mor e than one PC or with a combination of one or more PCs and Ex change Ser ver . When synchronizing with multiple computers , the items that you synchroniz e will appear on all of the computers with which they are synchr onized.
62 Synchronizing Information and Setting Up E-mail Security Synchroniz e Outlook information with Ex change Server Y ou can set up synchronization with Exchange Server on your device, if it is available to you thr ough your company or wir eless service provider .
Synchronizing Information and Setting Up E-mail Security 6 3 Schedule synchronization with Ex change Server Y ou can schedule information to be synchronized automa tically between your device and the Exchange Server , or schedule synchronization at regular time intervals.
64 Synchronizing Information and Setting Up E-mail Security • Using C omm Manager to enable Direct Push 1. On the T oday screen, tap the Comm Manager ic on ( ). 2. On the Comm Manager screen, tap the Microsoft Direct Push button. The button will turn to , which indica tes that you will receiv e e-mails as they ar rive.
Synchronizing Information and Setting Up E-mail Security 6 5 4.3 Synchr onizing via Bluetooth Y ou can connect and synchronize your device with the PC using Bluetooth. T o synchronize with a computer via Bluetooth 1. Follo w the instructions in ActiveSync Help on the computer for configuring Bluetooth on your computer t o support ActiveSync.
66 Synchronizing Information and Setting Up E-mail Security Change Media synchronization settings Once you select the Media information type in ActiveSync to be synchronized, an y of your fav orite music and video files in Windows Media Player playlists can be synchr onized.
Synchronizing Information and Setting Up E-mail Security 6 7 4.5 Setting Up E-mail Security Windows Mobile on y our device protects your Outlook e-mails through Secure/Multipurpose Internet Mail Extension (S/MIME), which allows you to digitally sign your messages as w ell as encrypt them.
68 Synchronizing Information and Setting Up E-mail Security 4. Do one or both of the following: • T o sign all your outgoing e-mail messages so that recipients can be certain that the messages were sent by you and ha ve not been altered in any w ay , select the Sign all outgoing e-mail messages check box.
Chapter 5 Managing Y our P ocket PC Phone 5.1 P ersonalizing Y our P ocket PC Phone 5.2 Adding and Remo ving Progr ams 5.3 Managing Memory 5.4 Cop ying F iles 5.
70 Managing Y our Pocket PC Phone 5.1 P ersonalizing Y our P ocket PC Phone Cust omize the T oday screen The T oday screen shows y our upcoming appointments, active tasks , and information about incoming messages. Y ou can customize the T oday screen on your device.
Managing Y our Pocket PC Phone 71 4. Do any of the following: • Select Next appointment to show only the next appointment in your schedule, or Upc oming appointments to show multiple appointments. • Clear the Display all day ev ents check box if y ou do not want to display all-day events.
72 Managing Y our Pocket PC Phone Wh y is the device name important? The device name is used to identify the device in the f ollowing situations: • Synchronizing with a PC • Connecting to a network • Restoring information from a backup Note If you synchronize multiple devices with the same PC, each device must ha ve a unique name.
Managing Y our Pocket PC Phone 73 5. T ap the alarm icon ( ) to specify the type of alarm you want. Y ou can choose a flashing light, a single sound, a repeating sound , or vibration. 6. If you choose to play a sound, tap the list next to the Play sound check box and tap the sound you wan t.
74 Managing Y our Pocket PC Phone 3. T ap the button you want to reassign. T o help you identify the butt ons, there are numbers and icons r epresenting the original function of the button. 4. In the Assign a program box, tap the pr ogram or shortcut you want to assign.
Managing Y our Pocket PC Phone 75 • Use the AC adapter t o plug your device into external power whenev er possible, especially when using a microSD car d or when using a modem or other peripherals. • Adjust the backlight settings. T o adjust the brightness of the backlight 1.
76 Managing Y our Pocket PC Phone Phone settings Y ou can customize phone settings, such as the ring type and ring tone to be used for incoming calls, and the keypad t one to be used when entering phone numbers. Open the Phone prog ram to customize these settings.
Managing Y our Pocket PC Phone 77 Networks Y ou can view available mobile phone networks, determine the order in which your device accesses another network if the curren t one is unavailable, and specify whether y ou want to change networks manually or automatically .
78 Managing Y our Pocket PC Phone 5.2 Adding and Remo ving Progr ams Before you pur chase additional programs f or your device, y ou should note the model name of your device, the v ersion of Windows Mobile software running on it, and the type of processor .
Managing Y our Pocket PC Phone 79 T o remove pr ograms Y ou can only remove prog rams that you installed. P rograms that c ome with your device cannot be remo ved. 1. T ap Star t > Settings > System tab > Remo ve Pr ograms . 2. In the Programs in stor age memory list, selec t the program y ou want to remov e, and tap Remov e .
80 Managing Y our Pocket PC Phone • Delete large files. T o find your largest files , tap Start > Programs > Search . In the T ype list, tap Larger than 64 KB , and tap Search . • In Internet Explorer Mobile, delete temporary Internet files and clear history information.
Managing Y our Pocket PC Phone 81 T o copy files to a stor age card 1. Make sure the storage card is pr operly inserted into your device. 2. T ap Star t > Programs > F ile Explorer and navigat e to the appropriate folder . 3. T ap and hold the file you want to copy , and tap C opy .
82 Managing Y our Pocket PC Phone 5.5 Backing Up Data Use Sprite Backup to back up data, which includes settings , files, contacts, and all other information, to a storage car d or to a designated f older on your device. This section describes the basics on how to install Sprite Backup and use it to back up and restor e data on your device.
Managing Y our Pocket PC Phone 83 Basic mode Basic mode is the default mode, and allows y ou to easily back up your entire Pocket PC with the tap of a button. Note T o change backup options or location, you will need to do it in Advanced mode. T o back up data in Basic mode 1.
84 Managing Y our Pocket PC Phone T o restore data in A dvanced mode 1. On the Advanced mode scr een, tap the Restore tab . 2. If there is a most recent backup file, this file will be displa yed with its contents. Otherwise, if you want to use an older backup file , tap then select the desired file.
Managing Y our Pocket PC Phone 85 T o enable remote backups to the computer via A ctiveSync 1. T ap Options > Net working . 2. Select the Enable Remote Backup check box. 3. Select Via ActiveS ync , then tap OK . 4. T ap then in the Location list , select PC and tap OK .
86 Managing Y our Pocket PC Phone 3. On the Hint tab, en ter a phrase that will help you r emember your password, but does not allo w others to guess your passwor d. The hint will be displayed after the wr ong password is enter ed four times. 4. T ap OK .
Managing Y our Pocket PC Phone 87 5.7 Resetting Y our P ocket PC Phone Occasionally , you may need to r eset your device . A normal (or soft) reset of your device clears all active progr am memory and shuts down all active programs. This can be useful when your device is running slower than normal, or a program is not performing properly .
88 Managing Y our Pocket PC Phone This operation will delete all your personal data, and reset all settings to manufacturer default. Press Send to restore manufacturer default, or press other keys to cancel. 3. Release the two SOFT KEY s, and then pr ess the button on your device.
6.1 Connecting to the Internet 6.2 Internet Explorer Mobile 6.3 Using C omm Manager 6.4 Using Bluetooth 6.5 Using Wi-F i 6.6 Using Int ernet Sharing 6.
90 Getting Connected 6.1 Connecting to the Internet Y our device is equipped with powerful network ing functions that enable you to connect to the Internet through Wi-Fi, GPRS (General P acket Radio Service) or the mobile phone net work.
Getting Connected 91 5. Enter the Acc ess point name, then tap Next . 6. Enter the user name and password , only if required . 7. T ap Finish . Notes • T o view help information for any screen, tap the help icon ( ).
92 Getting Connected T o set up a dial-up connection to your ISP When you use your device t o dial up to your ISP and connect to the Internet, you will be billed by the number of minutes that y ou use. T o establish a dial-up connection on your device, you need the same settings that you normally use when you dial up from y our computer .
Getting Connected 93 If you have set up multiple types of connections on your device, y ou can manually start a connection. 1. T ap Star t > Settings > Connections tab > Connections . 2. T ap Manage existing connections . 3. T ap and hold the name of the desired connection, then tap Connect .
94 Getting Connected 2. In Internet Explorer on your PC, click F av orites > Add to F avorites and save or mov e favorite links to the Mobile F avorites subfolder in the F avorites list. 3. Connect your device to your PC. If synchroniza tion does not start automatically , click Sync .
Getting Connected 95 T o save a picture from a Web page 1. In Internet Explorer Mobile, tap and hold the picture, and tap Save Image . 2. Do one of the following: • T o save the picture in My Pictures on your device, tap Y es . • T o save the picture in another location, such as a storage card , tap Save As .
96 Getting Connected 6.3 Using C omm Manager Comm Manager acts like a central switcher that lets you enable or disable phone features as w ell as manage your data connections easily . T o open Comm Manager • T ap the Comm Manager icon ( ) on the T oday screen; or • Press the Comm Manager button on the right side of the device.
Getting Connected 97 6.4 Using Bluetooth Bluetooth is a short-range wireless communications technology . D evices with Bluetooth capabilities can exchange inf ormation within a distance of about 10 meters without requiring a physical c onnection.
98 Getting Connected Note By default, Bluetooth is turned off. If you turn it on, then turn off your devic e, Bluetooth also turns off. When you turn on your device again, Bluetooth automatically turns on. T o turn Bluetooth on and make your de vice visible 1.
Getting Connected 99 T o accept a Bluetooth partnership 1. Ensure that Bluetooth is turned on and in visible mode. 2. T ap Y es when prompted to establish a partnership with the other device. 3. Enter a passcode (the same passcode that is ent ered on the device requesting the partnership) to establish a secure connection.
100 Getting Connected T o connect a Bluetooth hands-free or stereo headset 1. Make sure that both your device and the Bluetooth headset ar e turned on and within close range, and that the headset is visible. Refer to the manufacturer’ s documentation t o find out how to set the headset in visible mode.
Getting Connected 101 Beam information using Bluetooth Y ou can beam information, such as contacts, calendar items, and tasks , as well as files from your devic e to your computer or t o another Bluetooth- enabled device.
102 Getting Connected T o beam other types of information, tap Menu > Beam [type of item] . 6. T ap the device name to which you want to send the beam. 7. If you beamed an Outlook item and it is not automatically added to Outlook, select File > Import and Expor t in Outlook to import it.
Getting Connected 103 T o enable Bluetooth Explorer and Bluetooth file sharing on your de vice 1. T ap Star t > Settings > Connections tab > Bluetooth > FTP tab. 2. Select the Enable Bluetooth Explorer check box. This makes the Bluetooth device folder visible in the F ile Explorer .
104 Getting Connected 5. Navigate to the f older where you want t o paste the files on your device, then tap Menu > Edit > P aste . Use the devic e as a Bluetooth modem Y ou can connect your device to a notebook or desktop computer thr ough Bluetooth and use the device as a modem for the comput er .
Getting Connected 105 3. Now , open the Internet Sharing program on y our device. T ap Start > Programs > In ternet Sharing . 4. Select Bluetooth P AN as the PC Connection . 5. Fr om the Network Connection list, select the name of the connection that your device uses to connect to the Internet.
106 Getting Connected T o use a Bluetooth phone as a modem for your devic e 1. On your device, tap Start > Settings > Connections tab > Connections . 2. T ap Add a new modem c onnection . 3. Enter a name for the connection. 4. I n the Select a modem list, tap Bluetooth .
Getting Connected 107 T o connect to a wireless network 1. Open the Comm Manager . 2. T ap the WLAN button to turn on/off the wireless function. The WLAN icon indicates the wireless status . : Wi-F i is turned on. : Wi-F i is turned off . 3. After Wi-F i has been turned on, your device then scans f or available wireless networks in your area.
108 Getting Connected Next time you use your device to detect wireless networks, y ou will not see the pop-up message windows again, and you will not be prompted to ent er the network key of the previously accessed wireless network (unless you perform a hard reset which will erase custom settings on your device).
Getting Connected 109 networks and the wireless signal icon ( ) appears on the title bar . The arrows in this ic on will move back and forth while your device is scanning for a wireless LAN signal . Once your device succ essfully connects to a wireless LAN, the arrows st op moving.
110 Getting Connected 6.6 Using Int ernet Sharing Internet Sharing connects your PC or notebook comput er to the Internet by using your device ’ s data connection (GPRS or EDGE, for instance). Y ou can choose to connect via USB or Bluetooth. Follo w the procedure in this section to set up your devic e as a USB modem.
Getting Connected 111 6.7 Using Spb GPRS Monitor Spb GPRS Monitor measures the amount of data transf ers that you hav e made via GPRS or a phone dial-up connection, and calculates network usage costs.
112 Getting Connected T o show or hide items on the T oday Plug-in 1. T ap Star t > Settings > Personal tab > T oday . 2. On the Items tab, tap GPRS Monitor then tap Options .
Getting Connected 113 T o customize the GPRS Monitor pop-up window When you tap the GPRS Monitor icon on the title bar , a pop-up window opens and shows you detailed statistics about data transfers, such as the da ta size just transferred and its cost, the data amount left that you are allowed to transf er , and more.
114 Getting Connected Options: T ar iff Details tab Options: T ar iff tab T o set up traffic limit notifications Y ou can set up traffic limit notifications if you want to be notified when a traffic limit is reached. 1. On the GPRS Monitor screen, tap T ools > Options .
Getting Connected 115 4. Enter the tariffs that you ar e charged for this connection. F or more information about tariffs, see “ T o enter service plan details” . 5. Repeat steps 1 to 4 to configur e more profiles. 6. When you hav e finished profile setup, tap OK .
116 Getting Connected 6.8 Using T erminal S ervices Client The T erminal Services Client allows you to log on to a PC running T erminal Services or Remote Desktop, and use all the resources a vailable on that PC. For example , instead of running W ord Mobile on your device , you can run the PC version of W ord and access the .
Getting Connected 117 Notes • Do not use the Start menu on your device. • If a network administrator has configured T erminal Ser vices Client on your device to rec onnect to disconnected sessions, and you previously disconnected from a T erminal Ser ver without ending the session, the T erminal S ervices Client reconnects to that session.
118 Getting Connected.
7.1 E-mail and T ext Messages 7.2 MMS Messages 7.3 P ocket MSN 7.4 Calendar 7.5 Con tacts 7.6 T asks 7.7 Notes 7.8 V oice Recor der Chapter 7 Ex changing Messages and Using Outlook.
120 Exchanging Messages and Using Outlook 7.1 E-mail and T ext Messages Messaging is where all of your e-mail accounts and your text message account are locat ed.
Exchanging Messages and Using Outlook 121 1. T o synchronize remotely , you need to set up and connect to an over- the-air connec tion (GPRS or ISP dial-up). F or more details, see the procedures in “ Connecting to the Internet” in Chapter 6. 2. Disconnect your device from your c omputer or LAN.
122 Exchanging Messages and Using Outlook 6. Enter your name (the name you w ant displayed when you send e- mail), user name, and passwor d; tap Next . Select the Save password check bo x if you want to sa ve your passwor d so that you do not need to enter it again.
Exchanging Messages and Using Outlook 123 Setting Description Outgoing mail requires authentication Select this if your outgoing e-mail ser ver (SMTP) requires authentication.
124 Exchanging Messages and Using Outlook Tips • T o enter symbols, tap Shift using the on-screen keyboard. • T o set the priority, tap Menu > Message Options . • If you are working offline, e-mail messages are moved to the Outbox folder and will be sent the next time you connect.
Exchanging Messages and Using Outlook 125 T o add an attachment to a message 1. In a new message, tap Menu > Insert and tap the item you want to attach: Picture , V oice Note , or F ile . 2. Select the file you want to attach, or recor d a voice note .
126 Exchanging Messages and Using Outlook Download messages The manner in which you download messages depends on the type of account you ha ve: • T o send and receive e-mail for an Outlook e -mail account, begin synchronization through A ctiveSync. F or more inf ormation, see “Set up Outlook e-mail ” in this chapter .
Exchanging Messages and Using Outlook 127 Cop y text messages from and to the SIM card 1. T ap Star t > Messaging . 2. T ap Menu > Go T o > T ext Messages . 3. In the message list, select the text message you want to copy . 4. Do one of the following: • T o copy a text message to the SIM card, tap Menu > C opy to SIM .
128 Exchanging Messages and Using Outlook V erify the digital signatur e on a signed message you rec eive 1. Open the Outlook e-mail message that has been digitally signed. 2. At the top of the message, tap V iew Signa ture Status . 3. T ap Menu > Check Certificate .
Exchanging Messages and Using Outlook 129 The folders you cr eate and the messages you mov e will then be mirrored on the e-mail ser ver . F or example, if you mo ve two messages from the Inbox folder.
130 Exchanging Messages and Using Outlook 7.2 MMS Messages Creating and sharing multimedia messages ( MMS ) with your friends and family are easy with your device .
Exchanging Messages and Using Outlook 131 4. In the Preferenc es tab, select or clear the provided check bo xes according to y our needs. Y ou can choose to keep track of y our MMS messages, retrieve messages immediat ely , accept or reject messages, and request a delivery or read rec eipt.
132 Exchanging Messages and Using Outlook Note If you add several MMS service providers to the MMS Configura tion screen, you can choose one as your default MMS pro vider .
Exchanging Messages and Using Outlook 133 Repeat steps 5 and 6 to insert a photo/video, text, and audio into each slide that you added. While on a slide, you can: • T ap to preview the slide. • T ap to go to the previous slide. • T ap to go to the next slide.
134 Exchanging Messages and Using Outlook T o add text to an MMS message When entering text into an MMS message, y ou can do the following: • T ap inside the text box and enter your own text. • Choose from common wor ds or phrases. T ap to add a text string from the My T ext list.
Exchanging Messages and Using Outlook 135 V iew and reply MMS messages T o view an MMS message • Use the playback contr ols , , and . • T ap Objec ts to see a list of files included in the message. On the Message Objects screen, you can do the following: • T o save a file, select it, and tap Menu > Save .
136 Exchanging Messages and Using Outlook T o start MSN Messenger 1. T ap Star t > Programs > P ocket MSN . 2. T ap MSN Messenger . T o sign in or out • T o sign in, tap anywhere on the MSN Messenger screen. Enter the e- mail address and password f or your P assport or Hotmail account, and tap Sign In .
Exchanging Messages and Using Outlook 137 T o schedule an appointment 1. T ap Star t > Calendar . 2. T ap Menu > New Appointment . 3. Enter a name for the appointment, and en ter information such as start and end times. 4. T o schedule an all- day event, in the All Da y box, tap Y es .
138 Exchanging Messages and Using Outlook 2. T ap Menu > Options > Appointments tab. 3. Select the Set reminders for new items check box. 4. Set the time when you want the reminder to alert you.
Exchanging Messages and Using Outlook 139 3. T ap Save to save the inf ormation on your SIM card. T o change contact information 1. T ap Star t > Contacts . 2. T ap the contact. 3. T ap Menu > Edit and enter the changes. 4. When finished, tap OK .
140 Exchanging Messages and Using Outlook T o copy contacts to the SIM card Only one phone number per contact name can be stored on a SIM card . When you copy a c ontact that has several phone numbers to your SIM car d, SIM Manager saves each number under a separate name .
Exchanging Messages and Using Outlook 141 • Filt er the list by categories. In the contact list, tap Menu > Filt er , then tap a category you’v e assigned to a contact.
142 Exchanging Messages and Using Outlook 4. Enter the part or full contact name and tap Find . T ap Selec t to choose the desired contact(s) from the list.
Exchanging Messages and Using Outlook 143 2. T ap Menu > New T ask , enter a subject for the task, and fill in information such as start and due dates, priority , and so on. 3. When finished, tap OK . Tip Y ou can easily create a short, to-do t ype task.
144 Exchanging Messages and Using Outlook T o locate a task When your list of tasks is long, y ou can display a subset of the tasks or sort the list to quickly find a specific task. 1. T ap Star t > Programs > T asks . 2. In the task list, do one of the following: • Sort the list.
Exchanging Messages and Using Outlook 145 T o create a note 1. T ap Star t > Programs > Notes . In the note list, tap Ne w . 2. T ap the Input Selec tor arrow next to the Input Method icon on the menu bar , tap the input method you wan t, and enter your text.
146 Exchanging Messages and Using Outlook Record a v oice note Y ou can create a stand-alone recor ding (voice note) or you can add a recording t o a note. T o create a voic e note 1. T ap Star t > Programs > Notes . 2. Do one of the following: • T o create a stand-alone recording , recor d from the note list.
Exchanging Messages and Using Outlook 147 7.8 V oice Recorder V oice Recor der lets you recor d your voice and then quickly send it via MMS or e-mail, beam it or set the recorded voice as y our ringtone. Note Voic e Recorder saves v oice recordings in AMR-NB ( Adaptive Multi-Rate Narrowband) format only .
148 Exchanging Messages and Using Outlook T o send the voice rec ording via e-mail 1. On the V oice Recorder screen, select the voice r ecording you w ant to send via e-mail. 2. T ap Menu > Send > O utlook E-mail . This automatically opens the Outlook E-mail with the voice rec ording automatically inserted as an attachment for the e-mail.
Chapter 8 Experiencing Multimedia 8.1 Using C amera 8.2 Using P ictures & V ideos 8.3 Using Windo ws Media Pla y er Mobile 8.4 Using A udio Manager.
150 Experiencing Multimedia 8.1 Using C amera T ak ing photos and recording video clips along with audio ar e easy with your device ’ s built-in camera.
Experiencing Multimedia 151 The available capture modes of the camer a are as follow s: • Photo : Captures standar d still images. • Video : C aptures video clips, with or without accompan ying audio . • MMS Video : C aptures video clips suitable for sending via MMS.
152 Experiencing Multimedia • Press the CAMERA button or the ENTER butt on to start recording video; press it again to stop r ecording. • Press the CAMERA button or the ENTER button each time when taking photos for a picture theme.
Experiencing Multimedia 153 4 Remaining information indicator . In Photo, C ontacts Picture, Picture Theme, Sports, and Burst modes, this shows the r emaining, available shots of pictures based on current settings. In Video and MMS Video modes, this shows the r emaining duration that can be r ecorded.
154 Experiencing Multimedia Still image capture modes While using Still Image capture modes, such as Photo , C ontacts Picture , Picture Theme , Sports , and Burst , you can capture still image(s) by pressing the CAMERA button on the device or the ENTER button on the NA VIGA TION.
Experiencing Multimedia 155 The Review scr een After taking a still image or recording a video clip , you can view the image or video clip on the Review screen . In addition, you can tap the icons at the bottom of the Review screen to delete a captur ed image or video, send it via e-mail or MMS, and more.
156 Experiencing Multimedia 5 Assign to Contacts . T ap to associate the photo to a selected contact. 6 Brow se . After you have taken phot os in Sports or Burst mode, the total number of consecutive shots is shown in the lo wer right corner of the Review screen.
Experiencing Multimedia 157 Capture mode Capture size setting Zoom range Video Medium (176 x 144) 1x and 2x Small (128 x 96) 1x and 2x MMS Video Medium (176 x 144) 1x and 2x Small (128 x 96) 1x and 2x Contacts Picture Large (480 x 640) 1.0x to 2.0x Medium (240 x 320) 1.
158 Experiencing Multimedia The Camer a Settings screen Camera Settings screen in Photo mode While capturing a still image or video clip using any capture modes, tap the T ool icon ( ) to access the Camera Settings screen. The Camera Settings screen allows you to configur e the capture settings.
Experiencing Multimedia 159 3 3 T ap to selec t a setting and close the submenu. Alternatively , press NA VIGA TION up/down to select a setting, then press NA VIGA TION left to close the submenu. For mor e information about the differ ent menus and settings, see the succeeding sections.
160 Experiencing Multimedia Capture Settings menu • Resolution . Select the desired image or video size. • Quality . Select the JPEG image qualit y level for all captur ed still images. Y ou can choose from Basic , Normal , F ine , and Super Fine .
Experiencing Multimedia 161 • Grid (Photo mode only). Choose whether or not to show a grid on the Camera screen. Showing a g rid helps you frame and center y our subject more easily and accurately . Grid • Keep Backlight . Choose whether to turn the backlight on or off while using the camera.
162 Experiencing Multimedia • Counter . By default, the newly captur ed image or video files are named with a prefix and some sequential numbers, such as 001, 002, and so on. T o reset the numbering to “001” for your captured files , tap Reset .
Experiencing Multimedia 163 8.2 Using P ictures & V ideos The Pictures & V ideos program collects, or ganizes, and sorts images and video clips in the following f ormats on your device. File T ype File Extensions Image *.bmp, *.jpg , *.gif GIF animation *.
164 Experiencing Multimedia The down arrow T ap to view the selec ted image. GIF animation icon T o play videos with audio 1. T ap Star t > Programs > P ictures & V ideos . By default, the conten ts of the My Pictures folder will be shown. 2.
Experiencing Multimedia 165 T o view slide shows Y ou can view your pictures as a slide show on your device. P ictures are shown in full-screen view with 5-second int ervals bet ween slides. 1. T ap Star t > Programs > P ictures & V ideos . 2.
166 Experiencing Multimedia • T o crop a picture, tap Menu > Crop . Next, tap and drag to select the area to crop . T ap inside the box to crop , or tap outside the box to cancel cropping . • T o adjust the brightness and contrast levels of a picture, tap Menu > Auto C orrect .
Experiencing Multimedia 167 3. T ap Menu > Save to Contact . 4. T ap the contact, or navigate and tap Select to choose the contact from your Con tacts list. T o customize more image settings 1. T ap Star t > Programs > P ictures & V ideos .
168 Experiencing Multimedia About the contr ols The following ar e available contr ols on the Windows Media Pla yer Mobile. Controls on W indows Media Player Mobile This contr ol Does this Play/P ause a file. Display the video in full screen. Display a W eb site where you can find music and videos to play .
Experiencing Multimedia 169 About the screens and menus Windows Media Pla yer Mobile has three primary screens: • Playback screen . The default screen that displays the playback controls (such as Pla y , Pause , Next, Previous, and Volume) and the video window .
170 Experiencing Multimedia Cop y media files to your de vice Use the latest version of the deskt op Player (Windows Media Player 10 or later) to synchroniz e digital media files to your device (instead of dr agging a file from a folder on y our PC to a folder on your devic e, for example).
Experiencing Multimedia 171 • In the File List which is the middle pane, multi-select desired files then drag them to the Sync List. • Click the Start Sync button found at the bottom of the S ync List.
172 Experiencing Multimedia that it contains new files that you r ecently copied to y our device or storage card. T ap Menu > Update Libr ary to manually update the library list.
Experiencing Multimedia 173 playlist on your device by sa ving the current Now Pla ying playlist and by giving it a new name. T o save a new pla ylist 1. If you are not on the Library screen, tap Menu > Library . 2. T ap to select a categor y (for example, My Music or My Playlists).
174 Experiencing Multimedia 8.4 Using A udio Manager Audio Manager is a music bro wser and player in one . It gives you access to all the music files on your device , and allows you to easily br owse for the music that you want to pla y by organizing music into cat egories such as title, artist, album, etc.
Experiencing Multimedia 175 No. Description 1 Opens the All Songs submenu where you can bro wse music files by file name or song title. 2 Opens the Playlists submenu where you can cr eate playlists and play them back. 3 Opens a submenu where you can bro wse music files by the selected category.
176 Experiencing Multimedia Music Play er Music Player is int egrated within Audio Manager , and it lets you play back music files. After selecting a song in the Library, Music Pla yer opens and automatically plays it. Use the available buttons to con trol the playback.
Experiencing Multimedia 177 Playlists A playlist is a list of music files that play in a sequential or der . The Playlists screen shows the curren t playlists that are f ound on your device and memory card. There are two types of playlists that will be sho wn on the Playlists screen: • Windo ws Media Play er playlists .
178 Experiencing Multimedia T o create a playlist 1. On the Library ’ s M ain screen, tap Playlists . 2. On the Playlists screen, tap Menu > New . 3. Enter a Playlist name and tap OK . 4. On the Playlists screen, tap the playlist y ou have just cr eated and tap Edit .
Experiencing Multimedia 179 Set music as ring tone Audio Manager allows you t o select your favorite music and set it as a ring tone for your devic e. 1. Use the NA VIGA TION Contr ol to select a song in the Library, or tap a song to play it in Music Play er .
180 Experiencing Multimedia No. Description 1 Title . Show s the ring tone name for the song. 2 Duration . Shows the length of the song after trimming. 3 Time . Show s the playback time when the song is played. 4 T rimmer . Allows y ou to mark the part of the song that will be used for the ring tone.
9.1 W ord Mobile 9.2 Ex cel Mobile 9.3 V iewing Slide Show s with P ow erP oint Mobile 9.4 Using A dobe Reader LE 9.5 Using MIDlet Manager 9.6 Using ZIP 9.
182 Using Other Applications 9.1 W ord Mobile W ord Mobile is a streamlined v ersion of Microsoft W ord . W ord documents created on your PC can be opened and edit ed on your device. Y ou can also create and edit documents and templa tes in W ord Mobile and save them as *.
Using Other Applications 183 9.2 Ex cel Mobile Exc el Mobile makes it easy for you to open and edit Ex cel workbooks and templates creat ed on your PC. Y ou can also create new w orkbooks and templates on your devic e. T o create an Ex cel file 1. In Excel Mobile, tap New .
184 Using Other Applications 9.3 V iewing Slide Sho ws with P owerP oint Mobile With P owerP oint Mobile , y ou can open and view slide show presentations created on your PC. Slide sho ws in *.ppt and *.pps format crea ted using Po werPoin t '97 and later can be viewed in P owerP oint Mobile.
Using Other Applications 185 9.4 Using A dobe Reader LE Adobe Reader LE is an application for viewing PDF (P or table Document Format) documen ts on your device.
186 Using Other Applications Tips Alternativ ely , you can also tap the following toolbar butt ons at the bottom of the screen: • T ap to Fit Screen ; tap to Fit Width . • T ap to zoom in; tap to zoom out. T o rotate the view • T ap T ools > V iew > Rotate Right to rota te the document view clockwise in 90 degree increments.
Using Other Applications 187 9.5 Using MIDlet Manager MIDlets are Java applications that can run on mobile devic es. Y our device supports Java 2 Micro Edition, J2ME. The MIDlet Manager allows you t o download Java applications , such as games and tools that are specifically designed for mobile devices .
188 Using Other Applications T o run MIDlets on your device 1. T ap Star t > Programs > MIDlet Manager . 2. T ap a MIDlet to run. T o view the MIDlets currently running • T ap the down arrow on the top left of the MIDlet Manager screen, then tap Running .
Using Other Applications 189 T o change the display name of a MIDlet 1. T ap and hold a MIDlet, and tap Rename . 2. Enter a new name for the MIDlet, then tap OK . Note Y ou cannot change the name of a MIDlet suite. T o uninstall a MIDlet/MIDlet suite Before you uninstall a MIDlet/MIDlet suit e, make sure that it is not running .
190 Using Other Applications Security Option Description Net Acc ess Determine whether a MIDlet/MIDlet suite can access the Internet. Local Connectivity Enable a MIDlet/MIDlet suite to access services, such as Bluetooth. App Auto Run Enable a MIDlet/MIDlet suite to run at specified times, or any time.
Using Other Applications 191 Note Y ou cannot selec t multiple ZIP files. 2. The files contained in the zip file are then displa yed. Select files by doing one of the following: • T ap to select a file. • T o select several files, tap Action and make sure Multi-Select Mode is selected.
192 Using Other Applications 9.7 Using V oice Speed Dial Y ou can record voice tags so tha t you can dial a phone number or launch programs simply by speaking a word . Creat e a voice tag f or a phone number 1. T ap Star t > Contacts to open the Contacts list.
Using Other Applications 193 5. When you creat e a voice tag for the it em, you can do one of the following: • T ap the Record button ( ) to rebuild the voice tag . • T ap the Play button ( ) to play the voice tag. • T ap the Delete button ( ) to delete the voice tag.
194 Using Other Applications.
Appendix A.1 Regulatory Notices A.2 PC Requirement to Run A ctiveS ync 4.x A.3 Specifications.
196 Appendix A.1 Regula tory Notices Agency identification numbers For r egulatory identification purposes, your product (P ocket PC Phone) is assigned a model number of HERA100.
Appendix 197 • ETSI EN 301 489-7 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) for radio equipment and services; Part 7: Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS).
198 Appendix Damage requiring service Unplug the product from the electrical outlet and refer servicing to an authorized service technician or provider under the following c onditions: • Liquid has been spilled or an objec t has fallen into the product.
Appendix 199 Safety precautions for pow er supply unit Use the corr ect external power source A product should be operated only from the type of power sour ce indicated on the electrical ratings label. If you are not sure of the type of power sour ce required, c onsult your authorized service provider or local power c ompany .
200 Appendix SAR Information • 0.583 mW/g @10g (CE) head • 0.725 mW/g @10g (CE) body T elecommunica tions & Internet Association (TIA) safety information Pacemak ers The Health Industry M anuf.
Appendix 201 Other tips and cautions • Avoid using your phone near metal structures (for example , the steel frame of a building). • Avoid using your phone near strong electromagnetic sour ces, such as microwav e ovens, sound speakers , TV and radio.
202 Appendix WEEE Notice The Directive on W aste Electrical and Electronic Equipment ( WEEE), which entered into f orce as Eur opean law on 13th F ebruary 2003, resulted in a major change in the treatment of electrical equipment at end-of-life.
Appendix 203 A.2 PC Requir ement to Run A ctiveSync 4.x T o connect your device to the PC, you must have Microsoft® ActiveSync® program installed on your PC.
204 Appendix A.3 Specifica tions Syst em Information Processor TI's OMAP TM 850, 201 MHz Memory - ROM : 128 MB - RAM : 64 MB SDRAM (Figur es are the total ROM and RAM memory available for use and storage . Since the memory is shared by the Operating System, applications , and data, the actual available memory is less than what is written).
Appendix 205 Camera Module T ype 2 Megapixel color CMOS camera Resolution Photo: 1600x1200 (UX GA), 1280x960 (SX GA), 640x480 ( VGA), 320x240 (QVGA), 160x120 (QQVGA ) Video: 176x144 (QCIF), 128x96 Dig.
206 Appendix Audio Audio Con troller AGC Microphone/ Speaker Built-in/Dual, Hands-free Headphone AMR/AAC/W AV/WM A/MP3 codec Expansion Slots Card Slot microSD™ (SD 2.
Inde x.
208 Index A A2DP 99 About licenses and protected media 169 ActiveSync - Comm Manager 96 - copy files 80 - install and set up 56 - overview 28 - synchronize 60 Add and remov e programs 78 Add attachme.
Index 209 - file formats 151 - icons 151 - overview 29 - settings 158 - specifications 205 Change - device name 72 - screen text size 74 Clock & Alarms 32, 72 Close program 80 Comm Manager 33, 9.
210 Index F F avorites (Internet Explor er) 93 File Explor er 29 Find - device information 74 - operating system version number 74 Find c ontact - online 141 - on device 140 Forward message 124 G Game.
Index 211 MIDlet Manager - configure MIDlet security 189 - install MIDlets from Internet 187 - install MIDlets from PC 187 - manage MIDlets/MIDlet suites 188 - overview 29, 187 - uninstall MIDlets/MI.
212 Index - Camera 29, 150 - Comm Manager 33, 96 - Contacts 29, 138 - Download Agent 29 - Excel Mobile 29, 183 - File Explor er 29 - Games 29 - GPRS Monitor 30 - Help 29 - Internet Explorer Mobile 29,.
Index 213 Settings (Personal tab) - Buttons 31 - Input 31 - Keyboard Sliding Sound 31 - Lock 31 - Menus 31 - MSN Options 31 - Owner Information 31 - Phone 32 - Sounds & Notifications 32 - T oday .
T T asks 30, 142 T asks search 42 T ask Manager 75 T emporar y Internet files (Internet Explorer) - delete 95 T erminal Ser vices Client 116 T ext size - screen 74 - W eb pages 94 Time 72 T oday scree.
Ein wichtiger Punkt beim Kauf des Geräts HTC HERA100 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HTC HERA100 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HTC HERA100 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HTC HERA100 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HTC HERA100 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HTC HERA100 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HTC HERA100 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HTC HERA100. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HTC HERA100 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
