Benutzeranleitung / Produktwartung ScanJet Prof 3000 des Produzenten HP
Zur Seite of 35
HP Scanjet Professional 3000 Scanner User Guide.
ii.
Content s 1 Scanner o verview ............................................................................................................ 3 Scanner hardware .............................................................................................
2 Scanned pages are out of or der .............................................................................. 22 Optimize scanning and task s peeds ........................................................................ 22 The scan is completely bla ck or complete ly w hite .
1 Scanner overview This User Guide covers what you need to kno w about using your scanner . • Scanner hardware • Scanner software Scanner hardware 1 Document feeder 2 Front panel 3 USB input 4 Power supply input See also Scanner front panel buttons Scanner front panel buttons Use the Scan button on the scanner front panel to start a scan.
HP Scanjet 3000 Scanner 4 See also Useful scanner features Scanner lamp setting The scanner lamp turns off after each scan. After about 15 minutes of inactivity , the scanner automatically enters its Sleep (Po wer Save) mode.
2 Use the scanner The following topics describe the HP Scanjet scanner as well as ho w to scan an original document. • Load originals • Scan a document Load originals For helpful information on loading your docum ents properly , refer to the following topics.
HP Scanjet 3000 Scanner 6 • Scanning the following t ypes of documents mi ght result in paper jams or damage to the documents. Wrinkled or creased documents Curled documents T orn documents Document.
• Clean the scanning rollers if the roll ers are vis ibly dirty or after scanning a document that has pencil writing on it. See also Clean the rollers and the scanner gl ass Scanner paper path problems Load document s 1. Unfold the document feeder extensio n and the output tra y extension.
HP Scanjet 3000 Scanner 8 4. Align the edges of the documents by tapping the bottom of the stack against the table top. Rotate the stack 90 degrees and repeat. 5. Load your single-sid e documents face down with the top of the pages pointing down. Load your dou ble-side docum ents with the 1 st page face down and the top of the pages pointing down.
2. Adjust the paper guides to center the original. Make sure the paper guides touch the edges of the original. Scan a document The following topics describe ho w to scan originals using the scanner an d the scanner software.
HP Scanjet 3000 Scanner 10 3 Useful scanner features Experienced document manageme nt professionals might be interested in the following scan features. These featur es are avail able from any document TWAIN application that allows you to modify the scan s ettings in its user interface.
1. S tart the scanning software, and t hen select the TW AIN data source. 2. On the TW AIN user interface, press t he Color Dropout tab, choose the color channel you wish to remove from the Color drop-down list. For information about the color dropout settin g s, see the online help for the scanning software that you are using.
HP Scanjet 3000 Scanner 12 4 Care and maintenance This section presents information about how to care for and maintain the scanner . • Order mainten ance and scanning sup plies • Clean the sca nne.
4. Dry the glass with a dry , soft, lint-free cloth. 5. With a light touch, dust the two small strip s of gray reflective materi al with a dry , soft, lint-free cloth. 6. Close the scanner hatch, and then reconn ect the USB cable and power supply to the scanner .
HP Scanjet 3000 Scanner 14 6. If streaks still appear , repeat steps 3 throug h 4. The cleaning cloth can be cycled through the scanner up to five times within 30 minutes. After that the cloth will dry out. If repeated cycling of the cleaning cloth do es not remove the streaks from the scanned image, clean the rolle rs.
Replace the pad assembly Replace the pad assembly under the follo wing conditions: • The Maintenance Re commended dialog box indicates it is due for mainte nance. • Y ou experienc e repeated document jams an d cleaning the pad assembly did not help.
HP Scanjet 3000 Scanner 16 3. Close the scanner hatch, and then reconn ect the USB cable and power suppl y to the scanner . NOTE: HP recommends that you replace the pick roller ever y 100,000 scans.
5 Troubleshooting This section contains solutions for common problems with the scanner . • Basic troubleshooting tips • Scanner installation troubleshooting • Scanner initialization or hardware .
HP Scanjet 3000 Scanner 18 Scanner Installation troubleshooting If the scanner does not work after installation, you might see a message on the computer screen that is similar to one of the following: y The computer cannot communicate with the scanner .
T roubleshooting 19 2. Use the Add/Remove tool (in Windows Vist a or Windo ws 7, the Programs and Features tool) from the Control Panel to uninstall the HP Scanjet 3000 scanner driver . 3. Restart the computer . 4. Use the HP Sof tware CD that came with t he scanner to reinstall the HP Scanjet 3000 scanner driver .
HP Scanjet 3000 Scanner 20 Check that the scanner has po wer The power cable is connected bet ween the scanner and a po wer outlet. • Ensure that the power cable is securely connected bet ween the scanner and a live electrical outlet.
T roubleshooting 21 3. Unplug the po wer cable from the power source, wait 60 seconds, an d then plug it back in. 4. Restart your computer . Use the Windows Device Manager tool to verif y that the computer recognizes the scanner .
HP Scanjet 3000 Scanner 22 Scanner lamp st ays on The scanner lamp turns off after each scan. After about 15 minutes of inactivity , the scanner automatically enters its Sleep (Po wer Save) mode. If the scanner lamp remains on after a long period of inactivity , turn of f the scanner , wait 30 seconds, and then turn the scanner back on.
NOTE: For the best OCR results, scanner compression should be set to a low compression level or disa bled. Resolution should be set to 300 ppi (dpi) for English and Europea n languages and 4 00 ppi (dpi) for Chinese or K orean character recognition.
HP Scanjet 3000 Scanner 24 Scanner buttons are not working correctly After each step, press a button to see if it is working correctly . If the problem persists, proceed with the next step. 1. A cable might be loose. Ensure that the USB cable is sec urely connected.
y If the page looks ske wed as they feed in to the scanner paper path, check the resulting scanned image in the soft ware to ensure that it is not skewed. y The pages mig ht not be placed correctly. St raighten the pages and adjust the pap er guides to center the stack.
HP Scanjet 3000 Scanner 26 Originals are curling up in the scanner output tray Under dry conditions, light weight originals such as those printed on carbon less copy paper may curl in the output tray . T o minimize curl, flatten curled edges on the originals before placing them in the doc ument feeder .
3. Smooth out any wrinkles caused b y the jam. 4. Remove any debris (paper , staples, clips, etc.) that you see in the paper p ath. 5. Close the scanner hatch until it snaps into place. 6. Reload the unscanned ori ginals in the document feeder. 7. Resume scanning.
HP Scanjet 3000 Scanner 28 6 Product support Accessibility options o n this scanner include the abi lity to enable an d disable scanner buttons. See also Control of the scanner buttons Getting assista.
Product support 29 6. If you already purchased an HP Care Pack Service, please check the support conditions in your contract. Where to get additional information There are several sources of information that describe using the scanner a nd the scanning software.
HP Scanjet 3000 Scanner 30 7 Specifications This section contains regulatory informat ion and pr oduct specifications for your scanner . Scanner Specifications Name Description Scanner type Duplex sheetfed scanner Size Width: 285 mm (1 1.22 in), De pth: 157 (6.
Document specifications Name Description Minimum paper size 74 x 52 mm (2.9 x 2.1 in) Maximum paper size 215.9 x 864 (8.5 x 34 in) Minimum paper weight 50 g/m 2 (13.
HP Scanjet 3000 Scanner 32 This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. In stead, it is your responsibilit y to dispose of your waste equipment b y handing it over to a designated collection po int for the recycling of waste electrical and electronic equi pment.
Index Ａ clean the scanner glass, clean rollers, 12 Ｐ Accessibility , 28 pages are out of order, 22 auto document feeder , 5 Ｂ pap er black stripes jams, skew , misfeed, 25 troubleshooting, 23 pa.
Ein wichtiger Punkt beim Kauf des Geräts HP ScanJet Prof 3000 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HP ScanJet Prof 3000 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HP ScanJet Prof 3000 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HP ScanJet Prof 3000 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HP ScanJet Prof 3000 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HP ScanJet Prof 3000 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HP ScanJet Prof 3000 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HP ScanJet Prof 3000. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HP ScanJet Prof 3000 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
