Benutzeranleitung / Produktwartung ProCurve 3500yl des Produzenten HP
Zur Seite of 219
Release Notes: V ersion K.13.49 Software for the ProCurve Series 3500y l, 6200yl, 5400zl, an d 8212zl Switches These release notes include in formatio n on the follow ing: ■ Downloading swit ch soft.
© Copyright 2006-2008 Hewlett-Packard Development Company , LP . The information contained herein is subjec t to change without notice. Publication Number 5991-4720 January 2009 Applicable Products P.
i Contents Software Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Premium L icense Swi tch Softwa re Featur es . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ii Enhancements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Release K.11.12 Enhancements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
iii Release K.12.10 Enhancements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Show VLAN ports CL I Command Enhancement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
iv Release K.12.51 Enhancements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Release K.12.52 Enhancements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
v Enabling Customized Web Authentication Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 Dynamic IP Lockdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
vi Release K.11.34 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151 Release K.11.35 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
vii Release K.12.09 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 Release K.12.10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
viii Release K.12.51 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176 Release K.12.52 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ix Release K.13.26 through K.13.39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 Release K.13.40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 Software Management Premium License Switch Software Features Software Management Premium License Swit ch Software Features The ProCurve 3500yl and 5400zl switches ship with the ProC urve Intelligent Edge softwa re feature set.
2 Software Management Download Switch Documentation and Software from the Web Download Switch Documentatio n and Software from the W eb Y ou can downloa d software updates and the co rrespond ing product do cumentatio n from the ProCurve Networking W eb sit e as desc ribed be low .
3 Software Management Download Switch Documentation and Software from the Web TFTP Download from a Server Syntax: copy tftp flash < ip-address > < rem ote-os-file > [ < primary | secondary > ] Note that if you do not specify the flash destination, the TFTP download defa ults to the primary flash.
4 Software Management Download Switch Documentation and Software from the Web Syntax: copy xmodem flash [< primary | secondary >] 1. T o reduce the download time, you may want to increase the baud ra te in your terminal emulator and in the switch to a value such as 115200 bits per sec ond.
5 Software Management Download Switch Documentation and Software from the Web Using USB to Download Switch Software T o use the USB port on the swit ch to download a software version f rom a USB flash dri ve: ■ The software version must be stored on the USB flash drive, and yo u must know th e file name (such as K_ 12_10.
6 Software Management Saving Configurations While Using the CLI Saving Configurations While Using the CLI The switch operates w ith two configurat ion files: ■ Running-Config File: Exists in volat ile memory and controls switch op eration.
7 Software Management Best Practices for Major Software Updates Best Practices for Major Software Updates Major software updates contain new features and en hancements, and are desig n ated by an increment to the major releas e version number . That is, K.
8 Software Management Best Practices for Major Software Updates Note: Y ou might opt to use a differen t methodology in which the new sof tware will be instal led as the secondary and not the primary .
9 Software Management Best Practices for Major Software Updates b. Create a backup configuratio n file and verify the change. Switch1# copy config config1 config config2 Switch1# show config files Con.
10 Software Management Best Practices for Major Software Updates Note This step will enable you to revert from K_ 13_05 to your previous im age with your previous configurat ion just by invoking the command boot system flash secondary . 6. Download the new primary image.
11 Software Management Best Practices for Major Software Updates 8. Reload the new switch image. Switch1# reload System will be rebooted from pri mary image. Do you want to continue [y/n ]? y At the prompt, answer y , for yes, and the switch will boo t with the new image.
12 Software Management Best Practices for Major Software Updates 1 | * * | config1 2 | * | config2 3 | | 2. Boot the switch using the secondary image (with config2).
13 Software Management Best Practices for Major Software Updates And later , the configuratio n that was created on K.12.57 is viewed while the switc h is running K.13.06: ProCurve5406zl-onK1306# show config K1257config <cr> The command ou tput will show how the K.
14 Software Management ProCurve Switch, Routing Swit ch, and Router Software Keys ProCurve Switch, Routing Swit ch, and Router Software Keys Software Letter ProCurve Networking Products C 1600M, 2400M.
15 Software Management OS/Web/Java Compatibility Table OS/W eb/Java Compatibility T able The switch W eb agent supports the following comb inations of OS browsers and Java Virtual Machines: Minimum So.
16 Software Management Minimum Software Versions Switch 5400zl 4p 10-GbE CX4 Module J8708A K.11.33 Switch 6200yl-24G-mGBIC J8992A K.11.33 Switch 3500yl 2p 10GbE X2 + 2p CX4 Module J8694A K.
17 Support Notes Minimum Software Versions Support Notes ROM Update Required! All yl and zl switches running K. 12.45 system software or earlier , will have the BootROM updated by this new version of system software. This software download wi ll boot the switch twice, first to update the BootROM to version K.
18 Support Notes Minimum Software Versions ProCurve(config)# snmp-server mib hpswitchauthmib excluded For more informat ion on the above topic, refer t o "Using SNMP T o V iew and Config ure Switch Authenticati on Features" in the "RADIUS Auth entic ation and Accounting" chapter of the Access Security Guide for your switch.
19 Support Notes Minimum Software Versions Management and Configuration Gu ide for ProCurve Wireless Edge Services zl Module h ere: ftp://ftp.hp.com/pub/networking/softw are/WESM-zl-MgmtCf g-Aug2007- 59918626.
20 Clarifications Minimum Software Versions Clarifications The following clarification or updates apply to doc umentation for the ProCurve Series 3500yl, 6200yl , 5400zl, and 8212zl Switch es as of July 2008.
21 Clarifications Minimum Software Versions ■ Maximum UDP Broadcast Forwa rding Entries: The number of UDP broadcast entri es and IP he lper addresses combined can be up to 16 per VLAN, with an overall maxi mum of 2048 on the switch.
22 Known Issues Minimum Software Versions Known Issues Release K.13.25 The following problems are known issues as of relea se K.13.25. SFTP/SCP (PR_0000008270 ) — An SFTP or S CP client session may not close after a config download session ends. The work-aroun d is to close the client manually .
23 Known Issues Minimum Software Versions ■ W eb (PR_100076101 4) — The W eb interface trunc ates 16 character passw ords to 15 characters. W o rkaround: configure 16 characte r passwords via the CLI.
24 Known Issues Release K.13.02 ■ Config T ransfe r (PR_1000781004) — The switch allows a config file transfer to set an invalid speed-duplex setting on a 100FX SFP .
25 Known Issues Release K.13.01.
26 Enhancements Release K.11.12 Enhancements Enhancements Unless otherwise noted, each new release includes th e enhancements added in all previous releases.
27 Enhancements Release K.11.35 Enhancements ■ CLI-configured sF low with multiple i nstances: In earlier software releases, the only method for co nfiguring sFlow on the swit ch was via S NMP using onl y a single sFlow inst ance. Beginning with software re lease K.
28 Enhancements Release K.11.41 Enhancements Release K.11.41 Enhancements Release K.11.43 includes the follow ing enhancement: ■ Added support for Unidirecti onal Fiber Break Detection (UDLD). Release K.11.42 Enhancements No enhancements, software fixes only.
29 Enhancements Release K.11.60 through K.11.63 Enhancements Release K.11.60 throug h K.11.63 Enhancements No enhancements, software fixes only. ■ V e rsions K.11.50 thro ugh K.11.59 were never bui lt. ■ V e rsion K.11.60 was never released. Release K.
30 Enhancements Release K.12.01 Enhancements Release K.12.01 Enhancements Release K.12.01 is a major software update cont aini ng many new f eatures and enhancements to existing features. The foll owing upd ates have been documented in the latest revisions to the manual s (February 2007).
31 Enhancements Release K.12.01 Enhancements Advanced T raffic Manageme nt Guide Qos Queue Config: Allows you to reduce t he number of outbou nd queues that all switch po rts will use to buffer packets for 802.1p user prio rities. Number of Default VLANs: In the factory d efault state, support has been increased from 8 VLANs to 256 VLANs.
32 Enhancements Release K.12.02 Enhancements In addition to the updates listed above, K.12 .01 also provides the followi ng enhancements: ■ Enhancement (PR_1000298 920) — A ping re quest issued t .
33 Enhancements Release K.12.04 Enhancements For more information, refer to “QoS TCP/ UDP Priority” in the Advanced T raffic Management Guide . Release K.12.04 Enhancements Release K.12.04 includes the follow ing enhancement: ■ Enhancement MSTP (PR_10003694 92) — Update o f MSTP implementati on to the latest IEEE P802.
34 Enhancements Release K.12.04 Enhancements [admin-edge-port] Enables admin-edge-port for RSTP/MSTP . If a bridge or switch is de tected on the segment, the port automatically operates as non-edge, not enabled.
35 Enhancements Release K.12.04 Enhancements Syntax : spanning-tree < port-list > < hello-time | path-cost | point-to-point-m ac | priority > [hello-time < global | 1 - 10 > When the switch is the CIST root, th is parameter specifies the interval (in seconds) between periodic BPDU transmissi ons by the designated ports.
36 Enhancements Release K.12.05 Enhancements Release K.12.05 Enhancements Release K.12.05 includes the follow ing enhancement: ■ Enhancement (PR_1000408 960) — RADIUS-Assigned GVRP VLANs enhancement. For more informatio n, see “How RADIUS-Based Authenticat ion Affects VL AN Operation” below .
37 Enhancements Release K.12.05 Enhancements Note Y ou can use 802.1X (port-based or cli ent-based) au thentic ation and e ither W eb or MAC authentication at the same time on a port, with a maximum of 32 cl ients allowed on the po rt. (The default is o ne client.
38 Enhancements Release K.12.05 Enhancements If the dynamic VLAN does not exist or if y ou have not enabled the use of a dynamic VLAN for authentica tion sessions on th e switch, the auth entication fails.
39 Enhancements Release K.12.05 Enhancements Therefor e, on a p ort where one or more a uthentica ted clie nt sessions ar e already running, all such clients are on the same untagged VLAN .
40 Enhancements Release K.12.05 Enhancements Figure 2. Active Configuration for VLAN 22 T emporarily Chang es for the 802.1X Session However , as shown in Figure 1 , because VLAN 33 is configured as untagged on port A2 and because a port can be untagged on only one VLAN, port A2 lo ses access to VLAN 33 fo r the duration of th e 802.
41 Enhancements Release K.12.05 Enhancements When the 802.1X client session on port A2 en ds, the port removes the temporary untagged VLAN membership. The static VLAN (VLA N 33) that is “permanently” co nfigured as untagged on the port becomes available ag ain.
42 Enhancements Release K.12.05 Enhancements Enabling the Use of GVRP-Learned Dyna mic VLANs in Authen tication Sessions Syntax: aaa port-access g vrp-vlans Enables the use of dynamic VLANs (learned through GVRP) in the temporary untagged VLAN assigned by a RADIUS server on an authenticated port in an 802.
43 Enhancements Release K.12.06 Enhancements Release K.12.06 Enhancements Release K.12.06 includes the follow ing enhancement: ■ Enhancement (PR_100030 8332) — Passwords (hashed) can be saved to the configuration file. Saving Security Credential s in a Configuration File In software release K.
44 Enhancements Release K.12.06 Enhancements ■ By storing different security settings in diff erent files, you can test differe nt security configurations w hen you first downl oad a new sof tware version that support s multiple config uration file s by changin g the config urat ion fi le used when yo u reboot the switch.
45 Enhancements Release K.12.06 Enhancements In software release K.12.06 and grea ter , you cannot view the confi gured local password settings i n plain text.
46 Enhancements Release K.12.06 Enhancements ■ The < hash- type > parameter specifies th e type of algorithm (if any) used to ha sh the password. V a lid values are plaintext or sh a-1 . ■ The < password > parameter is the cle ar ASCII text string or SHA- 1 hash of the passw ord.
47 Enhancements Release K.12.06 Enhancements < auth-pass > is the hashed authen tication password used with the config ured authenticat ion method. priv “< priv-pass >” is the (optional) hashed priv acy password used by a privacy pr otoc ol to encryp t SNMPv3 messages between th e switch and the station.
48 Enhancements Release K.12.06 Enhancements After you enter the complete password port-acc ess command syntax, t he password is set. Y ou are not prompted to enter the password a second ti me.
49 Enhancements Release K.12.06 Enhancements In software release K.1 2.06 and greater , RADIUS sh ared secret (e ncryption) keys can b e saved in a configurat ion file wi th the f ollowing sy ntax: ra.
50 Enhancements Release K.12.06 Enhancements If the keystring contains double-quotes, it can be quoted with single quotes (' keystring '). The fo llowing restrictions for a keystring apply: ■ A keystring cannot contain both single and d ouble quotes.
51 Enhancements Release K.12.06 Enhancements Figure 6. Example of Hashe d Content of an SSH Client Pub lic Key If a switch configuration contains multiple SSH clie nt public keys, each public key is saved as a separate entry in the configurat ion file.
52 Enhancements Release K.12.06 Enhancements Enabling the Storag e and Display of Securit y Credentials T o enable the security setti ngs described in “Security Settings that Can Be Saved” on page 44 to be included and viewed in the running co nfiguration on th e switch, enter the include-credentials command.
53 Enhancements Release K.12.06 Enhancements Operating Notes Caution ■ When you first enter the include-creden tials command to save the additional securi ty credentials to the running configuration, these settings ar e moved from internal storage on the switch to the r unning-config fi le.
54 Enhancements Release K.12.06 Enhancements ■ After you permanently save securi ty conf igurations to the current startup- conf ig file using the write mem ory command, you can v iew and manage security settings with the fol lowing commands: • show config : Displays the configuration sett ings in the current startup-conf ig file.
55 Enhancements Release K.12.06 Enhancements ■ If you upgrade ProCurve software on a sw itch from an earlier so ftware releas e to software release K.
56 Enhancements Release K.12.06 Enhancements Restrictions The following restri ctions apply when you enable se curity credentials to be stored in t he running configurat ion with the include-credenti als command: ■ The private keys of an SSH host cannot be stored in the r unning configurati on.
57 Enhancements Release K.12.07 Enhancements Note that the password port-acce ss values are configured separately from local operator use r - name and passwords that are conf igured with the password operator command and used for management access to the switch.
58 Enhancements Release K.12.09 Enhancements Release K.12.09 Enhancements No enhancements, software fixes only. Release K.12.10 Enhancements Release K.
59 Enhancements Release K.12.10 Enhancements The following examples illu strate the di splayed output depend ing on whether the d etail option is used.
60 Enhancements Release K.12.11 Enhancements Release K.12.11 Enhancements No enhancements, soft ware never released. Release K.12.12 Enhancements No enhancements, software fixes only. Release K.12.13 Enhancements No enhancements, soft ware never released.
61 Enhancements Release K.12.15 Enhancements T o enable SNM P informs, enter this co mmand: T o configure SNMP informs request op tions, use th e followi ng commands. T o specify the manager that receives the informs request, use the snmp-server host command.
62 Enhancements Release K.12.16 Enhancements Y ou can see if informs are enabled or disabled with the show snmp-server command as show n in Figure 9. Figure 9. Example Showin g SNMP Informs Option Enabled Release K.12.16 Enhancements No enhancements, software fixes only.
63 Enhancements Release K.12.19 Enhancements ■ Enhancement (PR_1000428 213) — This software enhancement adds the ability to configure a secondary authenti cation method to be used wh en the RADIU S server is unavailable for the primary po rt ac cess method.
64 Enhancements Release K.12.22 Enhancements Release K.12.22 Enhancements Release K.12.22 includes the follow ing enhancement: ■ Enhancement (PR_1000443 026) — Su pport for the n ew revision "C" Min i-GBICs was added to the CLI and the "show tec h" command.
65 Enhancements Release K.12.33 through K.12.40 Enhancements ■ Enhancement — Merged all of the K.12.24 and earli er software fixes and enhancements with the ProCurve sw itch 8212zl support. Release K.12.33 throug h K.12.40 Enhancements No enhancements; Never built.
66 Enhancements Release K.12.45 Enhancements Release K.12.45 Enhancements No enhancements; Never released. Release K.12.46 Enhancements No enhancements; Never released.
67 Enhancements Release K.12.52 Enhancements ■ Enhancement (PR_1000457 0598) — An impro ved version of the MSTP-VLAN mapp ing enhancement refere nced in PR_1000457691 wa s added.
68 Enhancements Release K.12.57 Enhancements ■ Enhancement (PR_1000464 170) — Thi s feature provides support f or adding the L LDP VLAN Name TL V to LLDP advertisements gen erated by ProCurve switches. For more informat ion, see the ProCu rve Management and Configuration Guide.
69 Enhancements Release K.13.01 Enhancements Release K.13.01 Enhancements Release K.13.01 is a major software update cont aini ng many new f eatures and enhancements to existing features, including IPv6 host and appl ication layer features (see “IPv6 Configuration Gui de for 2900/3500/5400/620 0/8200” on page 71 for details).
70 Enhancements Release K.13.01 Enhancements STP Diagnostics: Adds more diagnostic f unctions to resolve STP issues. Se e the section on “T roubleshooting an MSTP co nfiguration” in the chap ter on Multiple Instance Spanning-T ree Operation.
71 Enhancements Release K.13.02 Enhancements Release K.13.02 Enhancements Release K.13.02 includes the follow ing enhancement s. ■ Enhancement : Beginning with K.
72 Enhancements Release K.13.02 Enhancements When OSPF is Also Enabled on th e VRRP Routers When OSPF is enabled on the routers and a Fail-b ack event occurs, the Ow ne r router imme diately takes control of the vi rtual IP address and provid es the default gat eway function ality .
73 Enhancements Release K.13.02 Enhancements where VID = 16 VRID = 23 PDT = 12 seconds VRRP Preempt Mode with LACP and Older ProCurve Devices There can be an i ssue with VRRP Preempt Mode if an older .
74 Enhancements Release K.13.02 Enhancements There are trade-offs between selecting a smal l ad vertisement value and a large preempt delay time . A small advertisement value results in a faster fa ilover to the Backup router . A larger PDT value allows OSPF to converg e before the Owner router takes back contro l of it s virtual IP address.
75 Enhancements Release K.13.03 Enhancements Error Messages Release K.13.03 Enhancements Release K.13.03 includes the follow ing enhancement s. ■ Enhancement (PR_1000400 991) — The 802.1X Controlled Directions featu re now functions in dependently of the S TP configuration, allowing yo u to run STP and 802.
76 Enhancements Release K.13.04 Enhancements Release K.13.04 Enhancements Release K.13.04 includes the follow ing enhancement s. ■ Enhancement (PR_ 00 00000081) — Th e CLI clear module command al lows you t o remove module configurat ion informat ion from the configuration file.
77 Enhancements Release K.13.04 Enhancements ■ Enhancement (PR_ 000000 0082) — The CLI track interface command allows you to configure tracki ng for a port or list of ports, or a trun k or list of trunks.
78 Enhancements Release K.13.04 Enhancements Note A Backup VR switches to priority zero instead of it s configured value when al l its tracked entities g o down. An Owner VR always uses priority 2 55 and neve r relinquishes control volunta rily . CLI Commands The following commands are used for this enhancement.
79 Enhancements Release K.13.04 Enhancements Configuring T ra ck VLAN The track vlan command allows you to specify a VLAN or range of VLANs to be tracked by the VR. Notes VR operation must be down bef ore executing this command. Use the no enable command to disable VR operation.
80 Enhancements Release K.13.04 Enhancements For example: ProCurve(vlan-25-vrid-1)# no track Failover Opera tion Failover operatio n involv es handi ng off of t he VRs cont rol of th e virtual IP to ano ther VR. On ce a failover command is issued , the VR begins sending advertisements wi th priority zero i nstead of the configured priority .
81 Enhancements Release K.13.04 Enhancements Displaying the VRRP Configurati on Y ou can display the VRRP tracked entiti es by entering the command show n in Figure 11 . Figure 11. Example of show vrrp tracked entities Command Y ou can d isplay the VRRP confi guration by en tering the command show n in Figure 12 .
82 Enhancements Release K.13.04 Enhancements • The VRs operating VLAN can’ t be config ured as a tracking VLAN for that VR. • Ports that are part of a trunk can’ t be tracked.
83 Enhancements Release K.13.04 Enhancements ■ Enhancement (PR_ 00000000 84) — DHCP Option 66 provides a way to automatically download and in itially boot from a config uration that is diff erent from the f actory-shi pped configuration.
84 Enhancements Release K.13.04 Enhancements Possible Scenarios for Updati ng the Configura tion File The following t able shows various netw ork configurations and how Option 66 is handled.
85 Enhancements Release K.13.04 Enhancements • DHCP is preferred over BootP • If two BootP offers are received, the first one is select ed • For two DHCP offers: – The offer from an authoritat.
86 Enhancements Release K.13.04 Enhancements If the IP address has no t already been c onfigured on the inte rface (VLAN), you w ill see th e message shown in Figure 14 .
87 Enhancements Release K.13.04 Enhancements Operating Notes • If the conf igured BOOTP gateway address becomes i nvalid, DHCP rela y agent returns to the default behavior (assignin g the low est-numbered IP address).
88 Enhancements Release K.13.04 Enhancements Figure 1. Example of Inb ound Broadcast Ra te-limiting of 50% on Port 3 If you rate-lim it multicas t traffic on the same port, the multicast limit is also in effect for th at port, as shown in Figu re 2 . Only 20 percent of the multic ast traffic will be forwarded .
89 Enhancements Release K.13.04 Enhancements Figure 3. Example o f Disabling Inbound Mu lticast Rate-limitin g for Port 3 Operating Notes • This rate-limiting feature does not limi t unicast traffic. • This feature does not incl ude outbound multicast rate-limi ting.
90 Enhancements Release K.13.04 Enhancements For example, if the host “Labswitch” is in the domain abc.com, you can enter the following command and the destinat ion is resolv ed to “Labswitch .abc.com”. ProCurve(config)# telnet Labswitch Y ou can also enter t he full domai n name in the command: ProCurve(config)# telnet Labswitch.
91 Enhancements Release K.13.04 Enhancements Figure 17. Example of the show modules Com mand Output Figure 18. An Example of th e show modules deta ils Command for the 8212zl Sho wing SSM and Mini-GBI.
92 Enhancements Release K.13.04 Enhancements Note On ProCurve 3500yl and 6200yl seri es switches, the mini-GBIC inform ation does not display a s the ports are fixed and not part of any module. ■ Enhancement (PR_ 000000 0101) — This enhancement adds a vrrp option t o the debug command.
93 Enhancements Release K.13.04 Enhancements Figure 19. Example of the show vrrp Command with St atistics ■ Enhancement (PR_ 00000 00420) — This enhancement provides the show-tech option for customizing cop y tftp output.
94 Enhancements Release K.13.05 through K.13.15 Enhancements For example: Figure 4. Example of Using the show-tech Command t o Upload a Customized List Release K.13.05 throug h K.13.15 Enhancements No enhancements; Bug fixes only . Release K.13.16 Enhancements Release K.
95 Enhancements Release K.13.16 Enhancements For example: ProCurve(config)# console inactivity-timer 20 ■ Enhancement (PR_1000780 247) — This enhancemen t provides hpicf Downlo ad MIB support for t ransferring conf iguration files both t o and from a TFTP server .
96 Enhancements Release K.13.16 Enhancements Setting the Manageme nt Access Method—CLI Enter the following command to configure th e management access method using the CLI. Figure 5. Example of Co nfiguring IP Authorized Manager Access Method SSH Figure 6.
97 Enhancements Release K.13.16 Enhancements Figure 7. Example of Menu Showing Authorized Managers with Access Meth od Figure 8. Example of Edi t Menu for IP Managers Setting the Management Access Met.
98 Enhancements Release K.13.16 Enhancements Figure 9. Example o f Configuring Autho rized Manager Access Meth od in the Web Interface See “Using Autho rized IP Managers” in the Access Security Guide for your switch for more informat ion about a uthorized IP manage rs.
99 Enhancements Release K.13.16 Enhancements Columns supported are: Syntax: show interfaces cust om [port-list] column-list Select the information that you want to display.
100 Enhancements Release K.13.16 Enhancements Figure 20. Example of the Custom show inte rfaces Command Y ou can specify the column width by entering a colon after th e column name, th en indicating the number of charact ers to displ ay . In Figure 20 the Name column only displays the first four characters of the name.
101 Enhancements Release K.13.16 Enhancements Note on Using Pattern Matching with the “Show Inte rfaces Custom” Command If you have included a pattern matching command to search for a field in the.
102 Enhancements Release K.13.16 Enhancements Y ou can also use the no-tag-added parameter with ACL traffic filt ering when mirroring IP traffic. Figure 21.
103 Enhancements Release K.13.16 Enhancements Figure 23. Example of Se ssion Output Sh owing no-tag-added Option Note For more informatio n about traffi c mirrori ng, see “Monitorin g and An alyzing Switch Operation” in the Management and Configurat ion Guide for your switch.
104 Enhancements Release K.13.16 Enhancements SHOULD save the change to non-volatile storage.” DEFVAL { 2 } ::= { hpicfBridgeMirrorSessionEntry 2 } Operating Notes • The specified port can be a physical po rt, a trunk port, or a mesh port.
105 Enhancements Release K.13.16 Enhancements • W eb and MAC authentications are not allowed on the same port if unau thenticated VLAN (that is, a guest VLAN) is enabled for MAC authentication. An unauthent icated VLAN can’ t be enabled for MAC authent ication if W eb and MAC authentica tion are both enabled on the port.
106 Enhancements Release K.13.16 Enhancements Figure 24. Example of Disabl ing a Specific Cipher Configuring Key Lengths and DSA/RSA Support This enhancement allows you to specify the type an d length of the generated host key . The c ommand is: Y ou can also generate and use a DS A key as the host key .
107 Enhancements Release K.13.16 Enhancements Message Authenticati on Code (MAC) Support This enhancement allows config uration of the set of MACs th at are available for selection. Displaying the SSH Information The show ip ssh command has been enhanced to displa y information about ci phers, MACs , and key types and sizes.
108 Enhancements Release K.13.16 Enhancements Figure 25. Example of show ip ssh Comma nd Showing Ciphers, MACs an d Key Information Logging Messages There are new event log messages when a new k ey is.
109 Enhancements Release K.13.17 Enhancements • debug • debug2 • debug3 Release K.13.17 Enhancements No enhancements; Bug fixes only . Release K.13.18 Enhancements Release K.13.18 includes th e foll owing enhancements: ■ Enhancement (PR_1000406 763) — New comm ands were added to the CLI response t o the show tech comma nd.
110 Enhancements Release K.13.19 Enhancements For example, if yo u use the show interface custo m command to specify the ou tput, you can configure an alias for the comma nd to simplify execution. Figure 26. Example of Using t he Alias Command with show in t custom Creates a shortcut alias name to use in place of a commonly used command.
111 Enhancements Release K.13.19 Enhancements Note Remember to enclose the comma nd being aliased in quotes. Command parameters for the aliase d command can be added at the e nd of the al ias command string.
112 Enhancements Release K.13.19 Enhancements Note See the section “Command Differ ences for the ProCurve Series 2600/ 2800/3400cl/6 400cl Switches” on page 113 for command differences on these switches.
113 Enhancements Release K.13.19 Enhancements Figure 11. Example of the Logging Command with a Priority Description Note A notificat ion is sent to the SN MP agent if there are any changes to the syslog paramete rs either through the CLI or with SNMP .
114 Enhancements Release K.13.19 Enhancements • If the def ault severity value is in effect, al l messages that have severiti es greater than the default value are passed to syslog. For exam ple, if the default seve rity is “debug”, all messages that have severities great e r than debug are passed to syslog.
115 Enhancements Release K.13.19 Enhancements • Y ou can use up to thr ee W eb servers in your network to store and display customized W eb pages for W eb Authentication login. • T o configure a W eb server on your network, follow the instruction s in the documentation provided with t he server .
116 Enhancements Release K.13.19 Enhancements Customizable HTML T emplates The sample HTML files desc ribed in the follow ing s ections are customizable templates. T o he lp you create your own set HTML files, a set of the templates can be foun d on the down load page fo r ‘K’ software.
117 Enhancements Release K.13.19 Enhancements Figure 13. HTML Code for User Login Page T emplate <!-- ProCurve Web Authenticati on Template index.html --> <html> <head> <title>.
118 Enhancements Release K.13.19 Enhancements Access Granted Page (accept.html) Figure 14. Access Granted Page The accept.html file is the W e b page used to confirm a valid c lient login. This W eb p age is disp layed after a valid username and pass w ord are entered and accepted.
119 Enhancements Release K.13.19 Enhancements Figure 15. HTML Code for Access Grante d Page T empla te Authenticating Page (authen.html) Figure 16. Authentica ting Page <!-- ProCurve Web Authenticati on Template accept.
120 Enhancements Release K.13.19 Enhancements The authen.html file is the W eb page used to process a clien t login and is refre shed while user credentials are ch ecked and verified. Figure 17. HTML Code for Authentic ating Page T emplate Invalid Credent ials Page (reject_unauthv lan.
121 Enhancements Release K.13.19 Enhancements The reject_unauthvlan.html file is the W eb page used to displa y lo gin failu res in which an unauth enti- cated client is assigned to the VLAN configured for unauthoriz ed client sessions.
122 Enhancements Release K.13.19 Enhancements T imeout Page (timeout.html) Figure 20. T imeout Page The timeout.html file is the W eb page used to return an error messa ge if the RADIUS server is not reachable.
123 Enhancements Release K.13.19 Enhancements Retry Login Page (retry_ login.html) Figure 22. Retry Login Page The retry_login.html file is the W eb page displ ayed to a c lie nt that has entered an invalid username and/or password, and is given another opportunity to log in.
124 Enhancements Release K.13.19 Enhancements Figure 23. HTML Code fo r Retry Login Page T emplate SSL Redirect Page (sslredirect.html) Figure 24. SSL Redirect Page <!-- ProCurve Web Authenticati on Template retry_login.
125 Enhancements Release K.13.19 Enhancements The sslredirect file is the W eb page displayed when a client is redirected to an SSL server to enter credentials for W eb Authentication .
126 Enhancements Release K.13.19 Enhancements Access De nied Page (reject_no vlan.html) Figure 26. Access Denied Page The reject_novlan file is the W eb page displaye d after a clie nt login fails and no VLAN is configured for unauthorized clients.
127 Enhancements Release K.13.19 Enhancements Figure 27. HTML Code for Access Denied Page T emplate <!-- ProCurve Web Authenticati on Template reject_novlan.html --> <html> <head> <title>Access Denie d</title> <!-- The line below i s required to automatically redir ect the user back to the logi n page.
128 Enhancements Release K.13.19 Enhancements Commands for Using Custom W eb Authentication Pages aaa port-access web -based ewa-server Figure 29. Adding Web Servers with the aaa port-ac cess web-based ews-server Comman d Figure 31.
129 Enhancements Release K.13.19 Enhancements show port-access web-based config Figure 33. Example of show port-access Web-based config Command Output Enhancement (PR_1000460 265) — This enhancement pro vides Dynamic IP Lockdown , which is used to prev ent IP source address spoo fing on a per -port an d per -VLAN basis.
130 Enhancements Release K.13.19 Enhancements Protection Ag ainst IP Source Ad dress Spoofing Many network attacks occur when an attacker injec ts packets with fo rged IP source addresses into the network. Also, som e network service s use the IP source address as a component in their authentication schemes.
131 Enhancements Release K.13.19 Enhancements Prerequisite: DHC P Snooping Dynamic IP lockdo wn requires th at you enable DHCP snooping as a prerequisite for its operation on ports and VLAN traf fic: .
132 Enhancements Release K.13.19 Enhancements In this example, t he following DHCP leases have been lear ned by DHCP snoop ing on port 5. VLANs 2 and 5 are enabled for DHCP snoopi ng.
133 Enhancements Release K.13.19 Enhancements Enabling Dynamic IP Lockd own T o enable dynamic IP lockdown on all ports or specified ports, enter the ip source-lockdown command at the global configuration level. Use the no form of the command to disable dynam ic IP lockdow n.
134 Enhancements Release K.13.19 Enhancements • Remove the trusted-por t configuration. ■ Y ou can con figure dynam ic IP lockdown on ly from the CLI; this feature cannot be configured from the W eb management or menu interface . ■ If you enable dynamic IP lo ckdown on a po rt, you cannot add th e port to a trunk.
135 Enhancements Release K.13.19 Enhancements Adding a Static Binding T o add the static configur ation of an IP-to-MAC binding for a port to the lease database, enter the ip source-binding command at the globa l configuration level. Use the no form of the command to remove the IP-to-MAC bindi ng from the database.
136 Enhancements Release K.13.19 Enhancements An example of the show i p source-lockdown status command output is sho wn in Figure 31. Note that the operational status of all swit ch ports is displayed. This info rmation indicates whether or not dynamic IP lock down is supp orted on a port.
137 Enhancements Release K.13.19 Enhancements Figure 32. Example of show ip sou rce-lockdown bin dings Command Out put In the show ip source-loc kdown bindings command output, the “Not in HW” colu.
138 Enhancements Release K.13.20 Enhancements Figure 33. Example of debu g dynamic-ip-lockd own Command Outp ut Release K.13.20 Enhancements Release K.
139 Enhancements Release K.13.21 Enhancements Release K.13.21 Enhancements No enhancements; Bug fixes only . Release K.13.22 Enhancements No enhancements; Bug fixes only . Release K.13.23 Enhancements No enhancements; Bug fixes only . Release K.13.24 throug h K.
140 Enhancements Release K.13.40 Enhancements disabled (1), active (2), passive (3) } ACCESS read-write STATUS mandatory DESCRIPTION “Used to set administrative status of LACP on all the ports. A Port can have one of the three administrative status of LACP.
141 Enhancements Release K.13.40 Enhancements SNMP displays the counter and statistics totals accu mulated since the last rebo ot; it is not affected by the clear statistics gl obal command or the clear statistics < port-list > command. An SNMP trap is sent whenever the statis tics are cleare d.
142 Enhancements Release K.13.40 Enhancements Adding a Description for a Syslog Server Y ou can associate a user -frie ndly description with each of the IP addresses (IPv 4 only) config ured for syslog using the CL I or SNMP . The CLI com mand is: Figure 34.
143 Enhancements Release K.13.41 Enhancements Figure 35. Example of the Logging Command with a Priority Description Note A notificat ion is sent to the SN MP agent if there are any changes to the syslog paramete rs either through the CLI or with SNMP .
144 Enhancements Release K.13.44 Enhancements Release K.13.44 Enhancements No enhancements; Bug fixes only . (Not a public release) Release K.13.45 Enhancements The following prob lems were resolved in re lease K.13.45. ■ Enhancement (PR_0000010 783) — Support was added for the follow ing products.
145 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.11.12 Software Fixes in Release K.11.12 - K.13.49 Software fixes are listed in chronological order , oldest to newest. Unless otherw ise noted, e ach new re lease i ncludes the software fixes added in all previous releases.
146 Software Fixes in Release K.11.12 - K.13.49 Release K.11.13 ■ MSTP Enhancement (PR_100031046 3) — Implementation of legacy pa th cost MIB and CLI option for MSTP . ■ RSTP (PR_1000307278) — Replacing an 802.1D bridge devi ce with an end node (non-STP device) on the same Switch port, can resu lt in the RSTP Switch sending TCNs.
147 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.11.16 ■ CLI (PR_1000315256) — Inconsistent error message, " Resource unavailabl e ," when configuring more than the maximum nu mb er of allowe d static IP routes. ■ Crash (PR_1000322009) — The Switch may crash with a message similar to: Software exception in ISR at queues.
148 Software Fixes in Release K.11.12 - K.13.49 Release K.11.32 Software exception at ldbal_cost.c:1577 -- in 'eDrvPoll', task ID = 0x1760650-> ASSERT: failed. ■ Crash (PR_1000314305) — The switch may crash with a message similar to: Software exception at ipamMApi.
149 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.11.32 ■ Crash (PR_1000335430) — The Switch may crash with a message similar to: "Cam range reservation error" crash at aqSlaveRanges.c:172. ■ Event Log (PR_100030 8669) — After a Switch reset, the eve nt log does not display co rrect information .
150 Software Fixes in Release K.11.12 - K.13.49 Release K.11.33 ■ Module (PR_10003303 12) — Bootin g up the Switch with an unsuppo rted module in stalled may cause all existing modules to fail. ■ MSTP Enhancement (PR_10003317 92) — Implementation of Spanning-tree BPDU Filter and SNMP T raps.
151 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.11.34 "Software exception at alloc_free.c:422 -- in 'eDrvPoll'...-> No msg buffer", when Switch is configured for ACL logging. ■ Module J8705A (PR_1 000336281) — The Switch 5400 zl 20P 10/100/1000 + 4 mini GBIC module (J8705A) may stop forwarding packets.
152 Software Fixes in Release K.11.12 - K.13.49 Release K.11.36 ■ MIB (PR_1000307831) — The MIB va lue for ipAddrT able is not po pulated. ■ RIP (PR_1000331536) — RIP does not send a rout e poison updat e in response to a fai led route. ■ Show tech (PR_1000 294072) — Show T ech statistics displ ays incorrect port names for fixed ports.
153 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.11.40 Software Exception at rt_table.c.758 -- in 'eRouteCtrl', task ID = 0x8a d6b30 -> Routing Task: Route Destinations exceeded Release K.11.40 The following problem s were resolved in release K .
154 Software Fixes in Release K.11.12 - K.13.49 Release K.11.44 The following problem s were resolved in release K .11.43 (not a general release) ■ Crash (PR_1000307842) — When deleting/rem oving .
155 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.11.47 Release K.11.47 The following problem s were resolved in release K .11.47 (not a general release) ■ Management VLAN (PR_100029 9387) — The management VLAN does not allow connectivity from valid addresses.
156 Software Fixes in Release K.11.12 - K.13.49 Release K.11.61 ■ sFlow (PR_10003616 04) — Changed the maximum sF low skipcount to 24 bits. Release K.11.61 V e rsions K.11.50 thro ugh K.11.59 were never bui lt. V e rsion K.11.60 was never released.
157 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.11.63 Release K.11.63 The following prob lems were resolved in re lease K.11.63 ■ 802.1p QoS (PR_1 000368188) — 802.
158 Software Fixes in Release K.11.12 - K.13.49 Release K.11.65 Release K.11.65 The following problem s were resolved in relea se K.11.65 (not a general release) ■ Alarms/Log (PR_1 000371908) — The ambient temperature measured by the 5406zl chassis is 4 degrees C too high, causing the ge ne ration of false high temperature alarms.
159 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.11.67 ■ W eb/RADIUS (PR_1000368520) — W eb Authentica tion doesn't authenticate clients due to a failure to send RADIUS r equ ests to the conf igured se rver . ■ W ebUI (PR_1000371598 ) — Unable to Ac cess Stack Members through Commander W ebUI.
160 Software Fixes in Release K.11.12 - K.13.49 Release K.11.69 Release K.11.69 The following prob lems were resolved in re lease K.11.69 ■ Routing (PR_100039 2086) — The swi tch learns a bogus MAC address when the next hop address is unknown, causi ng the swit ch to stop forw arding traffic.
161 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.12.02 ■ Enhancement (PR_1000298 920) — A ping re quest issued t o a VLAN which is do wn will now return a more specific message; instead of " request timed o ut ", the message " The destination address is unreach able " will be displa yed.
162 Software Fixes in Release K.11.12 - K.13.49 Release K.12.03 ■ Crash (PR_1000392863) — Switc h may cr ash when setmib tcpConnState is used, with a message similar to: NMI event SW:IP=0x0079f4a0.
163 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.12.04 ■ Enhancement (PR_1000398 393) — For the interface < port-lis t > speed-duplex command, added the auto-10-100 configuration option to constrain a link to 10/ 100 Mbps speed and allow a more rapid linkup process when 1000 Mbps operation is not possible.
164 Software Fixes in Release K.11.12 - K.13.49 Release K.12.05 Release K.12.05 The following prob lems were resolved in re lease K.12.05. ■ BootROM (PR_1000402707 ) — BootROM does not update to latest version when updating code to primary flash.
165 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.12.08 Release K.12.08 Software never re leased. ■ Enhancement (PR_1000413 764) — In crease the size of the sysLocation and sysContact entries from 48 to 255 characte rs. For more information, see “Release K.
166 Software Fixes in Release K.11.12 - K.13.49 Release K.12.11 ■ SNMP (PR_1000374893) — When retrieving the switch serial number via SNMP , the management module serial number is returned inst ead of t he chassis serial number .
167 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.12.15 ■ Hotswap (PR_100042 2714) — Hotswa pping a mo dule may resu lt in a false module self -test failure.
168 Software Fixes in Release K.11.12 - K.13.49 Release K.12.16 ■ Rate-Limiting (PR_10 00420720) — Rat e limitin g is broken beyond 9. 5 Mbps. For a ny rate limit set to more than 9.5 Mbps, the actua l rate drops to 1 Mbps. Release K.12.16 The following prob lems were resolved in re lease K.
169 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.12.18 Release K.12.18 The following prob lems were resolved in re lease K.12.18. ■ CLI (PR_1000419379) — The “interface” command does not exist in the VLAN context, resulting in an inability to shift to the i nterf ace configuration context directly from the VLAN context.
170 Software Fixes in Release K.11.12 - K.13.49 Release K.12.20 ■ 10-GbE Log (PR_1000 424384) — The switch is not check ing for the presence of the J8694A ProCurve yl 10G X2-CX4 module early enough in the boot process, trig gering a log message when the check is executed.
171 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.12.22 ■ Routing (PR_1000432 449) — If the switch i s configured with both port security and routing, a physical port tran sition on the host may cause the switch to stop transmitting routed traff ic to that host.
172 Software Fixes in Release K.11.12 - K.13.49 Release K.12.24 ■ MSTP (PR_1000439775) — The switc h generat es a topo logy chan ge when a port go es off-line. With MSTP en abled and al l ports left at defaul t (auto-edge-port), when a port transitions to offli ne, a TC will be gene rate d, and the topology ch ange counter increases.
173 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.12.26 through K.12.29 Release K.12.26 through K.12.29 Software never bu ilt. Release K.12.30 Software never re leased. Release K.12.31 The following prob lems were resolved in re lease K.12.31.
174 Software Fixes in Release K.11.12 - K.13.49 Release K.12.44 Release K.12.44 Not a general release. ■ Enhancement (PR_1000457 691) — Thi s enhancem ent all ows the ma pping of all theoretically availa ble VLAN IDs (1- 4094) to an MSTP instance, ev en if some of the VLANs are not currently co nfigured on the switch.
175 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.12.46 ■ SNMP (PR_1000444744) — An snmp set of hpicfDot1xPaePortauth or an snmp set hpicfDot1xPaePortSupp of an invalid value ma y cause the switch to crash with a message similar to the foll owing: ASSERT at aaa8021x_dyn_reconfig.
176 Software Fixes in Release K.11.12 - K.13.49 Release K.12.48 Release K.12.48 The following prob lems were resolved in re lease K.12.48. ■ Enhancement Removed (PR_1 000470136) — Removal of the e.
177 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.12.52 ■ Routing (PR_1000424 308) — A static ro ute that poin ts to a deleted VL AN may cause other routing table errors. ■ CLI (PR_1000473468) — Removing a VLAN range from an MSTP instance (e.
178 Software Fixes in Release K.11.12 - K.13.49 Release K.12.54 Release K.12.54 The following prob lems were resolved in re lease K.12.54. ■ Connection Rate Filte r (PR_1000440871 ) — Some types of traffic could result in connection rate filt ering (CRF) that bloc ks the switch management IP address.
179 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.12.55 Release K.12.55 The following problems were resolved in relea se K.12.55 (never released). ■ DARPP (PR_1000736402) — The last port on the switch will not be initiali zed with Dynamic ARP Protection (DARPP) characteri stics if the last two ports are DARPP configured.
180 Software Fixes in Release K.11.12 - K.13.49 Release K.12.57 3) The SSH client application does not get a co mmand prompt (or equival ent) back from the switch until the OS is verified and burned to flash. 4) The show flash command incorrectly shows an OS image presen t in flash before th e OS has completely copied to flash .
181 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.13.02 Release K.13.02 The following prob lems were resolved in re lease K.13.02. ■ Enhancement (PR_1000458 124) — VRRP Preemptive Delay T imer . For more informati on, see “Release K.13.
182 Software Fixes in Release K.11.12 - K.13.49 Release K.13.03 ■ CLI (PR_1000455370) — Commands that di splay po rtmaps may yield corrupted output. For example, a singl e port may be di splayed as a port range. ■ RIP (PR_1000751858) — Some static rou tes may not be correct ly distribut ed by RIPv1 or RIPv2.
183 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.13.04 ■ Crash (PR_1000763409) — When entering and deleting ACLs, the switch may crash with a message similar to : PPC Data Storage (Bus Error) exception vector 0x300: Stack Frame=0x087a1ba8 HW Addr=0x1f89d420 IP=0x005e62e0 Task=’mSess2’ T ask ID=0x87a3cd0.
184 Software Fixes in Release K.11.12 - K.13.49 Release K.13.04 ■ Enhancement (PR_ 00 00000081) — The CLI clear module command allows yo u to remove module configurat ion informat ion from the co nfiguration file. For more i nformation, see “Release K.
185 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.13.04 ■ CLI (PR_0000000476) — V arious CLI parameters are rejected by the swi tch as invalid when the administrator is trying to configure ports of transcei vers/modules that have not yet been inserted into the swi t ch.
186 Software Fixes in Release K.11.12 - K.13.49 Release K.13.05 Release K.13.05 The following problem s were resolved in release K .13.05 (not a public release). ■ Link/Config (PR_10 00771549) — On a ProCu rve 3500yl Series Swi tch, a li nk will n ot come up after configuring t he port mode from MDI to AUTOMDIX (on one side of the link).
187 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.13.06 ■ UDLD (PR_0000001433) — After the switch is rebooted, UDLD may continue to keep switch ports in a blocked state. ■ VLAN Mirroring/Config (PR_00000012 40) — The VLAN Mirroring configuration is changed from its original value after updating from K.
188 Software Fixes in Release K.11.12 - K.13.49 Release K.13.08 W 03/11/06 03:18:53 00374 chassis: Ports 25-48 Slave ROM Tombstone: 0x13000601 W 03/11/06 03:18:53 00374 chassis: Ports 25-48: Lost Comm.
189 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.13.09 Release K.13.09 The following prob lems were resolved in re lease K.13.09. ■ Crash (PR_0000001689a ) — A switch running so ftware version K.1 3.04 or higher may crash during co nfiguration of broadcas t rate limit ing.
190 Software Fixes in Release K.11.12 - K.13.49 Release K.13.11 ■ RADIUS/Jumbo (PR_ 100077 9048) — When an 802.1X-enabled port belo ngs to a VLAN that is jumbo enabled, the Access-Request will specify a va lue of Framed-MTU of 91 82 bytes.
191 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.13.12 ■ 802.1X (PR_0000 002036) — 802.1X with Funk Steel Be lted RADIUS server causes the switch to fail to assign th e VLAN that it was sent with the "T unnel-Private-Group-Id" parameter .
192 Software Fixes in Release K.11.12 - K.13.49 Release K.13.13 .iso.org.dod.internet.mgmt.mib- 2.entityMIB.entityMIBObjects.entityPhysical.entPhysicalTable.entP hys calEntry.entPhysicalSerialNum .iso.org.dod.internet.mgmt.mib- 2.entityMIB.entityMIBObjects.
193 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.13.15 Release K.13.15 The following problems were resolved in relea se K.13.15 (never released). No enhancements; No bug fixes. Release K.13.16 The following problem s were resolved in release K .
194 Software Fixes in Release K.11.12 - K.13.49 Release K.13.17 A new configur ation option provides the abil ity to configure w hich MACs a client is pe rmitted to use; Feedback info rmation; a nd, SSH CLI show command information enhancements. For more information, see “Release K.
195 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.13.18 ■ SNMP (PR_1000761379) — When an SN MP get is used to gather statistics , the interface B1 on a J8702A module only up dates it s SNMP counters on every other query .
196 Software Fixes in Release K.11.12 - K.13.49 Release K.13.19 ■ W ake-On-LAN (PR_0000 004794) — W ake-On-LAN does not always work successf ully . ■ IP Phone (PR_0000004803) — A tand em IP phon e may stop tal king to the switch after a connected PC login failure and reboot.
197 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.13.21 ■ X2 T ransceivers (PR_0000004758 ) — Some ProCurve SR and ER X2-10GbE (J8436A, J8437A) transceivers have a timing issue that prevents the transc eivers from being correctly identified either when hot sw apped or duri ng a cold boot.
198 Software Fixes in Release K.11.12 - K.13.49 Release K.13.22 ■ Config (PR_1000781031) — When the valid port se tting ‘a uto-1000’ is c onfigured for any 10/100/1000 interface in an external.
199 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.13.24 ■ Authentication (PR_00000 07209) — A PC beh ind a tandem IP ph one is not able t o authenticate. Release K.13.24 The following problem s were resolved in release K .13.24 (not a public release).
200 Software Fixes in Release K.11.12 - K.13.49 Release K.13.26 through K.13.39 ■ GVRP/RADIUS (PR_0000 006051) — RADIUS-assigned VLANs are not propagated correctly i n GVRP . Please see “Note: This fix is associated with some new switch behavior: ” for a descripti on of the behavior chan ge with this fix.
201 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.13.41 Release K.13.41 The following problem s were resolved in releas e K.13.41 (N ot a public rele ase). ■ AAA (PR_0000008409) — The CLI comman ds aaa au thentication and aaa accounting return a resource unavailable error .
202 Software Fixes in Release K.11.12 - K.13.49 Release K.13.43 ■ CLI (PR_0000004042) — The CLI command snmp-server response-sourc e dst-ip-of-request does not work as expected when the desti nation IP address of the SNMP Request is the Loopback IP .
203 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.13.45 ■ CLI (PR_1000803731) — If the " |" charac ter exi sts in the banner text of a configuration file downloaded via TFTP transfer , the banner text may become corrupted, or the TFTP transfer may fail w ith a corrupted download file error message.
204 Software Fixes in Release K.11.12 - K.13.49 Release K.13.46 J9143B – ProCurve 1000-BX-U SFP-LC Mini-GBIC For more information, see “Release K.13.
205 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.13.46 password operator sha-1 "lsadkjlkjfsd..." Example of what that line mi ght look like after the fix: password operator sha0 "lsadkjlkjfsd...” No switch administrator interven tion is required for the forwar d configuration translation to occur.
206 Software Fixes in Release K.11.12 - K.13.49 Release K.13.47 Release K.13.47 The following problem s were resolved in re lease K.13.4 7. (Never released.
207 Software Fixes in Rel ease K.11.12 - K.13.49 Release K.13.49 Release K.13.49 The following prob lems were resolved in re lease K.13.49. ■ Auto-TFTP (PR_0000014646 /000001355 2) — Certain software file names may trigger auto-tftp to reload the same so ftware file repeatedly .
© 2006 - 2008 Hewl ett-Packard Development Company , LP . The information contained herein is subject to change without notice. January 2009 Manual Part Number 5991-4720.
Ein wichtiger Punkt beim Kauf des Geräts HP ProCurve 3500yl (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HP ProCurve 3500yl noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HP ProCurve 3500yl - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HP ProCurve 3500yl reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HP ProCurve 3500yl erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HP ProCurve 3500yl besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HP ProCurve 3500yl verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HP ProCurve 3500yl. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HP ProCurve 3500yl gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
